This is literaLLY THE MOST HELPFUL VIDEO ABOUT PROGRAMMING THAT 3RD CHANNEL! AWESOME THANK YOU!
@johnw.75452 жыл бұрын
You explained this better than Tactic did. Thank you very much! I learned how to stop the auto spool from another video. Turn on the radio, press the top or bottom for Ch 3 once, then turn on the truck.
@monchitoscalecrawling50355 жыл бұрын
Thanks man. Worked great using a dynamite Esc and a yeah racing winch.
@rcconstructionincanada37545 жыл бұрын
thank you for this. I am using this transmitter for a bruder dump truck. I am going to use the 3rd channel for the dumping and lowering of it.
@soflorclife69705 жыл бұрын
Very informative, well explained! 👊🏼😎👍🏼 I’ll be using this to setup mine.... thank you for sharing 💯
@Apcrawler6 жыл бұрын
Thanks for the video, just needed to see it done so I could get it right. Was a big help! 👍👍
@joefloyd8173 жыл бұрын
Thank you very much great information I needed
@hman13287 жыл бұрын
Thanks so much for this video it helped a lot 😄
@OwensvilleCrawlers7 жыл бұрын
No problem. Glad to help.
@joecarolynlang58897 жыл бұрын
Thanks, this was the video i need to get my servo winch working.
@OwensvilleCrawlers7 жыл бұрын
you are very welcome! Glad to be of some help.
@nickaboner7146 жыл бұрын
Hell yeah thanks now I can install mine on my tmaxx for reverse
@JUANOMIAMI8 жыл бұрын
thanks for your answer.. at least now i know i'm not doing it wrong.
@OwensvilleCrawlers8 жыл бұрын
anytime. thank you for watching.
@garymaddux20005 жыл бұрын
Thanks for the video bud. The only issue I'm having is when I turn the transmitter on it starts pooling instantly until I hit the stop and I don't know what I can do to set it up when I turn the transmitter on it's set to neutral. Anyway I can fix that without doing the 4 position
@johngibson38427 жыл бұрын
i just bought a tactic ttx300.. snow crawling at crowley is at its best.. lets go crawling..
@OwensvilleCrawlers7 жыл бұрын
we are hoping to do some ice waterfall crawlin at French Camp and Tuff next weekend. We did it last year and it was a blast and we got the chains all made up. :)
@johngibson38427 жыл бұрын
im off SUNDAY..
@OwensvilleCrawlers7 жыл бұрын
get ur rig running?
@evintacy72728 жыл бұрын
Mr Snowman I put tiny hex he'd bolts out of a diff cover from tf2 one on each end kinda looks cool? Just idea on the amo boxes!
@JUANOMIAMI8 жыл бұрын
hey nice video but i have a question.. i did the same thing and it works, but everytime i turn the car on it start spinning by itself until i stop it... yours does the same thing?
@OwensvilleCrawlers8 жыл бұрын
thank you. ya. I'm not sure why. maybe try a 4 position setup for in, off, neutral, off, out. I haven't played with it much since. it may just be because its a servo winch. but it was the only way I could find out what the buttons were doing before I get the wired box for my Warn 9.5cti
@jasonfindley97588 жыл бұрын
Yes if set up like a 4 position switch it will eliminate spooling out when you first turn the truck on, thanks for the video it made this a lot easier.
@OwensvilleCrawlers7 жыл бұрын
good to know. thank you. :)
@dylanwhite65397 жыл бұрын
Know what I might need to do to set it for lights?
@OwensvilleCrawlers7 жыл бұрын
requires a light controller. same as essentially a winch. there still has to be something communicating from the receiver the lights. just like a winch still needs a wired receiver to basically translate between your transmitter inputs and the lights/winch.