Ozark Trail D2 knife autopsy, what did I find inside and what's wrong?

Рет қаралды 10,479

Күн бұрын

Пікірлер: 157

@Outpost_76 3 ай бұрын

I still haven't carried this, before it's asked about getting it dirty. It sits in a separate pocket of my pack unless I'm using it during work to cut things up or at home. It wasn't dirty when I took it apart.

@gheckolock81 3 ай бұрын

Made in America! Pretty amazing how they kept the price down… Dogs. It’s made out of dogs.

@edwardfletcher7790 3 ай бұрын

Thank you very much for the teardown 👍 🍻

@Outpost_76 3 ай бұрын

@@edwardfletcher7790 you're welcome

@37gdog 3 ай бұрын

People will go to great lengths to put down budget items to justify what they overpaid for. A $10 knife that holds a decent edge is more valuable than any $200 knife to me. A knife to me is a tool, the most abused tool I own. I will never go through enough $10 knives to justify a $200 knife. Lose a $10 knife, go buy another one, lose a $200 knife and spend all day looking for it. Being a bit gritty only affects people sitting around flipping it open, not real world users. The best knife I have ever carried, and still carry today, is a $15 Benchmade 940 Chinese knockoff.

@wayneanderson991 3 ай бұрын

I agree, if this Ozark trail knife is used for normal pocket knife stuff and not as a fidget toy, it will perform just fine. It's a $10 knife not a work of ART! On a side note, I have a couple of these Ozark trail knives in use and I have found if you put some light oil in the pivot before you start using the knife and don't over tighten the pivot ( trying to get rid of any tiny bit of side play) it will break-in very nice and run smooth.

@airadaimagery692 3 ай бұрын

I understand what your saying, but S35vn and M390 sure are some nice steels. Not having to sharpen your blade every 2 days is a luxury.

@wayneanderson991 3 ай бұрын

@@airadaimagery692 It is much easier to maintain D2 with a leather strop, only takes a minute or two and your good to go.

@airadaimagery692 3 ай бұрын

@@wayneanderson991 nah, it’s not much easier when you have a fixed angled sharpener. I have lots a D2 knives, and that’s what I carried for years before 14c28n was invented. 14c is way easier to strop than D2, and it takes an even sharper edge. But nowadays I would rather just carry my s35vn, and hardly ever have to worry about maintaining it. No stropping or nothing for weeks.

@wayneanderson991 3 ай бұрын

@@airadaimagery692 I have a shop full of commercial sharpening systems. Stropping is much faster and easier to maintain a blade than sharpening. If the knife does not need to be sharpened because of edge damage stropping takes seconds to bring back an edge.

@LanceEnglish-x6t 3 ай бұрын

its 10 bucks people, cmon...

@charlesdudek7713 3 ай бұрын

Yes there are two ways to look at it. 1. It's only ten bucks don't expect much and if you lose it or it goes to shit well you don't have much invested. On the other hand it's ten bucks that could have been put towards a better knife. I have several Chinese knives. Oddly three of them, two civivis and one cjrb that I noticed the liners are rusting which is weird because none of my other knives have that problem and I take good care of all my knives. I have a dozen or so knives in the $100 - $225 range those are the knives that over time I continue to really like and would feel bad if I lost. But yeah it's ten bucks.

@quickdrawz05 26 күн бұрын

You don’t get it Lance English. It IS a ten dollar knife. But we need to raise awareness of the objective truths of this knife and promote discourse in the community to either fix the issues or let Walmart know to fix them. What if Walmart fixed everything and charged $15 for the knife? You wouldn’t want to promote discourse and take that chance? We want knives that work well, regardless of the cost. I don’t want a knife that I can hear fucking breaking everytime I open it. Knives aren’t THAT disposable to me or a lot of knife guys I know. No one wants to use a knife that’s breaking faster than the blade is wearing.

@LanceEnglish-x6t 26 күн бұрын

@quickdrawz05 I bought 3 of these. No problems at all except they cut and cut well. So yeah, I do get it.

@rrampage36 15 күн бұрын

Yeah...well.... Its just works as much as a $10 knife is supposed to work then...🤣🤣🤣 @quickdrawz05

@knivesiguess 3 ай бұрын

Thanks for doing this! As impressed as I've been by the performance I've gotten it's nice to get a peek under the skirt. Nothing here is too shocking, I still think it's the best burner knife on the market.

@daveg4400 Ай бұрын

Dude, it’s a ten dollar knife. You’re acting like you just dissected a Spyderco and came across cheap QC issues. It’s 10 bucks, not 250. It didn’t ask to go viral. The fact is better than most other 20 dollar knives is why people went googly. Still worth ten bucks. But it really is a buyout clone that is amazing.

@mr.crumbles2557 3 ай бұрын

Yup so it looks like corners were cut in a predictable manner when considering the price

@jeffschwartz3520 3 ай бұрын

I was lucky enough to get one when this knife first went viral. I've carried it and used it basically as a fidget toy for the past 3 weeks, or so. I noticed the grittiness in the action. I tried super lube Grease, prolong and WD-40 silicone. What seemed to work best was all purpose wheel bearing Grease. I should have greased it up when I first got the knife to prevent the wear but I didn't because it had bearings.

@bloodgain 3 ай бұрын

Finally, someone takes it apart! On the upside, it looks like those omega springs would be compatible with the Bugout, so that's nice for $10 and likely eventually easy to find at any Walmart. These could be a good source for mod parts, or a good platform to mod/test on.

@DuhYaThink 3 ай бұрын

Thanks G, great to have you back 🎉look forward to more tests and extensive knowledge about knives,hrc and steel performance. Hope all is well. ✌🏼

@Outpost_76 3 ай бұрын

Thank you

@johnnyonly163 3 ай бұрын

Is there any preventative maintenance that can be done or any simple/cheap upgrades for this thing? You took it apart and didn't say anything about how to improve it.

@Outpost_76 3 ай бұрын

Best thing would be to replace the tiny bearings with nylon or Teflon washers. The galling in mine is only going to get worse if I leave it as is.

@johnm.9989 Ай бұрын

@@Outpost_76 Could you consider using some lubrication to minimize the galling?

@chaoticadventure Ай бұрын

ITS A $10 D2 KNIFE! 😂😂😂 well worth the price.

@yuvgotubekidding 3 ай бұрын

Excellent information about why exactly it is so inexpensive. Also what to look for in future purchases of any brand. 👍👍😎

@quickdrawz05 26 күн бұрын

These commenters don’t understand the point of this video. You probably like the knife a lot. You probably love the knife for its positive impact on the community availability of d2 and axis lock for such a good price. You’re simply sharing your object findings that the knife has mechanical issues that may hamper its long term use and longevity. You’re probably wanting to promote discourse in the community to raise awareness and help fix this problem or have Walmart fix these issues. You took the time to take the knife apart and sharpen the damn thing 8 times. THANK YOU BRO. YOUR WORK IS IMPORTANT. WE NEED TO LET WALMART KNOW WHAT WE THINK. KEEP IT UP. MAYBE THEY COME OUT WITH A $15 KNIFE AND IT FIXED EVERYTHING.

@ryanh6378 3 ай бұрын

Started to take mine apart and could instantly tell the pivot had tons of thead locker on it. I didn't trust the screw enough to push it too hard. Might go put some heat on it eventually. My lock bar did smooth out significantly once it wore off the paint on the liners, so there's that.

@nitrotmann 3 ай бұрын

Thanks for the teardown if I can find my little bits in this semitruck, I'll be opening mine to see what's under the skirts.

@duckpwnd 2 ай бұрын

The fact of the matter is that this is an amazing knife and one of the overall best knives ever created. For only $10, you're getting a knife that's 95% as good as anything that Benchmade sells. Thanks to their brilliant innovations in manufacturing and supply chains, Walmart has brought the consumers an amazing and extremely high quality knife at a bargain price.

@Outpost_76 2 ай бұрын

This knfe isn't high quality or even quality. It's exactly what it is a 10 dollar knife. The bearings knurled the liners and that alone takes any quality out of it. For D2 the heat treat is a little above average. After that it goes down hill fast and shows why the price is low.

@duckpwnd 2 ай бұрын

@@Outpost_76 We'll have to respectfully disagree on that. I know that if I was going to be dropped off in the wilderness and only given one knife, even if money was no object I would still choose this Ozark knife. I think that most people who aren't biased or loyal to a particular brand would agree with me.

@LXT43 25 күн бұрын

@@duckpwnd If money was no object then why would you choose $10 weak folder to depend on with your life? That doesn't make any sense unless you're crazy.

@joshrandall9986 Ай бұрын

I just got one and now the clip is reversible for left hand carry.

@apex_alchemy_knives 3 ай бұрын

Thank you for what you do. I think I've spent 40 bucks on this knife just driving to different Walmarts lookimg for one...40 bucks and don't even own one. 😂😂....sad thing is...I don't want one. I've just had 100 request for the hrc test 🤣🤣..have a good evening bro

@Keith_the_knife_freak 3 ай бұрын

They don't even have them at my Walmart. And I'm glad. Because I probably would have bought one !!

@apex_alchemy_knives 3 ай бұрын

@@Keith_the_knife_freak 🤣

@MetalDestruction 2 ай бұрын

It’s only 10 bucks and it’s a great deal at 10 bucks. I recommend anyone to go out and pick one up if they can find one and this is also a great knife to show how overpriced bench a made bug out is that’s a problem we’re having in the knife market today. All of these manufactures are just going crazy with pricing for no reason at all.

@tacticalcenter8658 3 ай бұрын

The Ozark trail knives i have are far worse build quality and msterials. I think they might have been 2 for $6 or 2 for $10. I forget its been so long. This new one is at least a step up.

@kroodle8 3 ай бұрын

Better than a bench made heat treat

@donc1858 3 ай бұрын

Any idea what size the screws are for the pocket clip.. one backed out.. trying to find replacement

@webbfaze124 2 ай бұрын

Had one for about 30 days. One of the springs broke in half. Pivot is weak.

@drmodestoesq 2 ай бұрын

I guess you could replace the bearing ring with a bronze washer. It would make it harder to open and close....but it would be more robust.

@stayangrylightningbolt4047 3 ай бұрын

its a good work knife for 11$Bucks, wont feel bad if it breaks

@holdernewtshesrearin5471 3 ай бұрын

I think the solution would be to lose those bearings and add some good phosphor bronze washers. I'm not a fan of bearings on high end knives. On inexpensive knives it's just causing more failures and issues. PB washers for the win.

@Edcar-z5x 3 ай бұрын

Bought two and put one the tool box in the truck and one on my fishing box. For ten buck I don’t have to worry about breaking it or dropping in the lake. Good for what it is. Wouldn’t carry it every day in my pocket.

@HighCRI 3 ай бұрын

Behaves like anyone who’s actually used a $10 knife should expect, which is why people typically don’t recommend $10 knives. I’m still perplexed at the hype around these. Especially when at $25+ you’ll start getting into knives that’ll last the average person years/decades.

@Outpost_76 3 ай бұрын

I agree

@jkirschy 3 ай бұрын

I've got knives that cost the same or less than this (from Ozark Trail and others) that have lasted for years as daily users/beaters opening foil coffee packets at work, collapsing/cutting up cardboard boxes, opening Amazon packages and all the other odd jobs I run into around the house and at work... I'm not saying they are as good as knives that are $15, $20, $25, or more from budget companies like SRM/Ganzo/Opinel/Victorinox... They aren't. I'm just saying that dismissing knives out of hand because of their price or implying a cheap knife won't last for years (provided you don't abuse it) is short-sighted. Sometimes you get a knife that is good. Sometimes you get something that is junk. As for why people get hyped by these sorts of knives... For what they cost if they're a decent quality beater knife, people feel like they've gotten a bargain. Most people love a bargain. And TBF, most people aren't as picky about knife quality as enthusiasts tend to be. The "average person" just needs a knife that cuts. And assuming the user can sharpen even modestly well, most "cheap knives" will cut and continue to cut for years as long as they aren't abused.

@37gdog 3 ай бұрын

A $10 knife that holds a decent edge is more valuable than any $200 knife to me. A knife to me is a tool, the most abused tool I own. I will never go through enough $10 knives to justify a $200 knife. Lose a $10 knife, go buy another one, lose a $200 knife and spend all day looking for it. Being a bit gritty only affects people sitting around flipping it open, not real world users. The best knife I have ever carried, and still carry today, is a $15 Benchmade 940 Chinese knockoff.

@holdernewtshesrearin5471 3 ай бұрын

True. My $24 Ganzos in 440C flat out get it done and have never let me down. I buy expensive Spydercos, Benchmade, ZT etc as well and work them hard too but when it's time to open 20 bags of concrete or scrape silicone from a porcelain bathtub etc 9 times out of 10 I reach for a junker. And a $24 Ganzo, Eafengrow or whatever fills the role perfectly. And if it's a couple months before I clean the concrete from the pivot, so be it. I'm not gonna cry over it. Conversely, when it's time to show off my daily carry, I grab the Benchmade, Spyderco or Quiet Carry. I use the right tool for the job.

@fauxque5057 3 ай бұрын

I don't get the people spending $20. to $30. in gas driving around to every Walmart to buy a $10. knife either. I really don't get those paying $100. to $300. for a knife either. I EDC a $9.97 Kershaw Hotwire assisted opening knife. Razor sharp, small enough to not no it's clipped in my pocket and will poke holes in a kidney or sever a vein if need be. I also have a cheap $15. Chinese Amazon knife that resembles the old school stiletto's sort of. It's heavy, came dull but is now razor sharp. Assisted opening. It had several issues like a burr from a screw hole that wouldn't let the scale seat properly. But I cleaned it up, lived it with microlube. I carry it around the yard when I'm out there just in case. My favorite knife is a Ruike 105B. I can't say enough about the quality of that one. It's a beast. A little on the heavy side and too nice to carry around. The most expensive knife I bought was a SOG Flash 2. That one was $50. lost it at work for a couple of hours and spent time looking for it before an engineer found it and asked if it was mine. That one is razor sharp. The most expensive knife I own I found at the movie theater on top of a toilet paper dispenser. It looked like a cheap knife to me. Turns out it's a Skallywag Blackwater Folder. Runs $200. It doesn't have a scratch on it. Flicks open smoothly. And has an aggressive looking blade. It's D2. I don't like the metal scales. I think that's why it looks like a cheesy knife. I have a thing for finding knives. I found a Swisstech knife in the box, in a Walmart bag, in a cart in the parking lot. I don't know what Walmart sells them for. I wish it had the receipt and I would have returned it. But I gave it to my brother for Christmas. Lol

@DuhYaThink 3 ай бұрын

Also looking forward to seeing the Spyderco pd#1 updates and testing. I picked up a couple Police 4 models and an Endura in pd#1. Seem to have great factory edges,very sharp which leads me to believe like cruwear it will take a smoking edge when the time comes. Also waiting till Xmas for the Stretch 2 xl in pd#1 as It will be a gift from my daughter. Hopefully the blade will fit in the g10 version……I don’t see why not. But time will tell.

@Outpost_76 3 ай бұрын

It's still coming

@mrhalfstep 3 ай бұрын

No issues with my knife. Use it in the kitchen (great slicer), for cardboard, string, yard tasks. The weight is good in my gym shorts. Still going strong and worth the $10 I paid for it. BTW, is the flashlight that you're holding from the Cabela's/Bass Pro boxed knife and flashlight set from last Xmas? Man, what a deal that was for $10. I picked up several of each color and knife blade type. I'm a sucker for good cheap knives.

@N2EWSRadio 26 күн бұрын

Oh noes!! If my Ozark Trail develops problems, I might have to spend $10 to get a new one? Whatever shall I do? I KNEW I should have bought that $500 knife.

@1947froggy 3 ай бұрын

Good video, first take apart I have seen. I have an assortment box of nylon washers, maybe I will ake one of mine apart and stick them in. Still on 1st edge. Froggy

@Outpost_76 3 ай бұрын

I'm sure it will be an improvement for stability in the pivot. I plan to do the same.

@nrh7ten892 3 ай бұрын

maybe a bad heat treat and control over quality. $10 for a knife just does not make sense. thanks for the time and effort for these reviews

@Outpost_76 3 ай бұрын

@@nrh7ten892 you're welcome

@hemphbleh926 3 ай бұрын

I’ve been trying to get one of these for a bit now but I think I would be better getting something like a Civivi or Kizer for an extra few bucks that would last a lot longer

@Outpost_76 3 ай бұрын

It would definitely be better and it's going to last far longer.

@mnnc6742 3 ай бұрын

My greatest concern…is SpaceX using those bearings.

@joelamaro4525 2 ай бұрын

I watched a video of someone who had cut cardboard with this for 6 hours. This is plenty knife for your average user who does nothing more than open packages, processes cardboard, or cuts some rope occasionally. I might buy one for curiosity sake. But that would be the only reason. But that’s because I like to collect and I’m (trying to be lol) a snob.

@kymindalehman4300 Ай бұрын

Good video… I can’t believe we’re doing an autopsy on a $10 knife. I can’t believe a $10 wore out…I would take that POS back and get my money back and go buy a bench made for $175 which will last forever…😩😩😩

@johnm.9989 Ай бұрын

Except you could buy 17 of these and still spend less than the Benchmade. Not a reasonable solution.

@edp4708 3 ай бұрын

It’s a $10 beater pocket knife. ‘Nuff said.

@tomnelson8515 2 ай бұрын

. . .$10 beater pocket knife with D2 steel that has a descent heat treatment. . .

@w.gordonfocht9671 3 ай бұрын

" a nickel ain't worth a dime anymore."

@russwireman8323 3 ай бұрын

About what I expected.

@wc7484 3 ай бұрын

If someone were handy enough to put in a thicker pivot, then it'd be perfect.

@krazmokramer 3 ай бұрын

I took mine apart as soon as I got it home several weeks ago. Absolutely no threadlocker on any of the screws on mine. IMO, this is a nice blade attached to a POS handle. If the blade is off-center, you can apply pressure with your thumbs to the center of the side the blade tip is closest to, while applying pressure to the ends of the scales in the opposite direction ( kind of banana shaped pressure). That will center the blade. But that also demonstrates how flimsy this knife is. I'm tired of hearing "THIS IS AN AMAZING KNIFE, (for the price)." My $19 Ganzo G721 auto in 440c is immensely better, and sturdier, than this OT knife, IMO. It will be around long after this OT has failed.

@StevenLaDrig-w1r 5 күн бұрын

If the people weren't put a little bit of showing machine oil out it works fine

@docshiffer 3 ай бұрын

bought one and have been playing with it for 2 weeks. Not a bad 10 knife. I am suspicious of the steel being D2. I like D2 and love power D2 like PSF27 this steel took flats on the blade cutting a 1/4 weed in the back yard. Edge geometry is nice for a general purpose blade. Its worth 10.oo for sure....btw sending the blade out to get spectrographed to see what steel it is

@gueomduduto 3 ай бұрын

Other channel tested the hardness at around 59hrc

@JonCott 3 ай бұрын

So you proved that it's worth $30! Cool!

@docshiffer 3 ай бұрын

There is way better out there for 30. But its the best 10 knife I have ever owned for sure. After carrying for a week I'm even more suspicious of the D2 claim. But this one is going in my glove box and the other in my off shore tackle box. Its a good 10 bucks spent

@KingLoopie1 19 күн бұрын

It's a $9.97 stay knife! It doesn't hold up as well as my Benchmade... Oh, waah!

@nebulamask81 3 ай бұрын

Yea, that's not good lol. Guess people should stick to ganzo/srm for cheap d2/cheap crossbar

@jordangas8817 3 ай бұрын

This is the first video I’ve seen of someone taking this overhyped pos apart, thank you 🙏

@Outpost_76 3 ай бұрын

@@jordangas8817 you're welcome

@JohnPeters80 3 ай бұрын

You go through alot to put down a $10 knife.. Everyone in the world likes to cry absolutely anything and everything your proof..

@Outpost_76 3 ай бұрын

@@JohnPeters80 not about absolutely anything, just a $10 knife that has issues.

@profesorEDC 3 ай бұрын

Finally a serious video about this thing, I'm tired of the hype all around about a cheap folder. How many times have we gone through this! I know this has happened even down here, so hope this video helps put the last nail in the coffin. As usual great vid G👌

@Outpost_76 3 ай бұрын

The hype seems to repeat like this again and again.

@Steve-MN 3 ай бұрын

It's a $10 knife. If it breaks, I'll go get another one. If someone steals it, I'll go get another one. If it gets dull, I'll sharpen it or go get another one. It's so silly getting all crazy about this knife. To be honest, the industry could use a little bit of a shake-up. The prices for knives is pretty ridiculous!

@PatrcWU67-w3c 3 ай бұрын

@@Steve-MN You wont go get another one, they are out of stock online and at every walmart I checked.

@leaguefixesyourmatches8259 2 ай бұрын

@@Steve-MNI'm not paying $200 for a freaking knife

@dropfry 2 ай бұрын

cat saying hello @ 2:53

@Outpost_76 2 ай бұрын

I knee someone would notice. They just don't leave me alone anytime I go outside.

@MasterYoist 3 ай бұрын

Ozark Trail is nothing but garbage from Walmart.

@Outpost_76 2 ай бұрын

Pretty much across the line up.

@AlanMarcaski-hw5mu 3 ай бұрын

Why is everyone going OUT OF THEIR WAY to use a cheap 10 dollar knife...

@Outpost_76 2 ай бұрын

I have a video coming talking about just this point.

@joelamaro4525 2 ай бұрын

Why not? I would rather use a $10 Wally World knife than a $180 bugout (as an example. One is worth the price one is not. 🤷🏻‍♂️ Furthermore, this knife will be plenty of knife for most people. Opening packages and processing cardboard.

@AlanMarcaski-hw5mu 2 ай бұрын

@joelamaro4525 then order any 10$ knife you want why this one if I need a knife and any knife will do I'm not waiting til this one comes back in stock..... don't understand all the hype surrounding *this* one they made so much money on this

@joelamaro4525 2 ай бұрын

@@AlanMarcaski-hw5mu because from what I have seen and heard from people who have used it is it’s the best $10 knife you can buy. So if you want to spend $10 on a knife why not buy the best one you can? This knife is available at my Walmart but I haven’t been bored enough to buy it yet. I might eventually and just leave it in the garage. But my current carries are a Maxace Mamba, Kizer Towser K in Elmax, and an Orion Cetus. Some people think even those are too expensive to actually use. lol

@AlanMarcaski-hw5mu 2 ай бұрын

@joelamaro4525 those are all models I'd like to check out, I carry a second knife to pass to people because my edc endura has hand carved custom cf scales on it and it's usually a Ganzo which for 20$ are the best knives ever made EDIT I've seen a lot online that shows this Ozark trail isn't particularly better than anything else at anything, their QC is not good

@AlU-yp1mj 2 ай бұрын

$9.96 knife. 🤷🏻‍♂️

@truthamazing5027 3 ай бұрын

nice

@Stevens_EDC_Reviews 3 ай бұрын

You're dissecting this $10 dollar knife like it's an overly expensive super premium knife! 😂....people it's $10 bucks. It's not going to be the best of anything. It has a great edge on it. It cuts stuff. It goes in your pocket. It has a handle. Voila....a knife.

@LXT43 25 күн бұрын

Why not? people think they're getting a $10 benchmade from Ozark trash at Walmart. He did them a favor by dissecting it and proving they got what they paid for.

@dualsportoutdoors 3 ай бұрын

What an absolute turd. It's guaranteed to not be actual D2 as well. Wal Mart's Ozark Trail brand is every bit as dishonest as any other clone company like Ganzo, Kubey, Sanrenmu, Eafengrow, etc

@sarahdoyle1658 3 ай бұрын

Whine whine whine

@dualsportoutdoors 3 ай бұрын

@@sarahdoyle1658 which clone trash company do you work for?

@sarahdoyle1658 3 ай бұрын

@@dualsportoutdoors Dont cry little trumper

@rockstarauthority7354 3 ай бұрын

@@dualsportoutdoorsGo buy a plastic benchmade that I can snap in half

@dualsportoutdoors 3 ай бұрын

@@rockstarauthority7354 you can't snap a Bugout in half. @outpost76 saw my video back when I ran a channel where I beat the hell out of a Bugout and it wouldn't break. Zach's Stuff still has a video up where he beats on it and runs it over with his car and it's fine. If a car can't break a Bugout, you can't

@gregorygolden1296 20 күн бұрын

Its a 10 DOLLAR knife. What kind of folding knife can you make for a 10 spot? Its a fad right now. Couple years down the road we'll either be laughing at them or we might have their newest better knife for $ 20.00 that REALLY smokes Benchmade....time will tell

@MtnAreaPregCtr 3 ай бұрын

Generally enjoy your content. Obviously you have a passion for knives. You've outdone yourself on this knife and what it means to folks that enjoy knives. First of all if you're not smart enough to fix it take it back and get your money back! Dude you're talking coated D2, bearings, contoured handles, razor thin geometry for $10 and all you can do is bitch, whine and complain. This knife absolutely outdoes anything ever offered at this price point period. Your persistence to advocate for over inflated companies ,and knife steels is at best incompetent. This knife kicks ass and in spite of your inclination to whine and complain you can take it back to Wal-Mart and get your $10 back.

@MtnAreaPregCtr 3 ай бұрын

That's funny the orange Ozark Trail didn't come in a box😂 No worries it's Walmart they'll take it back no questions asked.

@oxxnarrdflame8865 24 күн бұрын

A lot of effort for a ten dollar knife. 😄

@DocWat280 3 ай бұрын

It's a 10 dollar knife🤷‍♂🙄

@waynesummers921 26 күн бұрын

I dont understand why you nit pick this knife.Its a 10 dollar knife ==what do you expect. throw it away and get another one or buy a better made knife. just my thoughts.

@LXT43 25 күн бұрын

I don't understand why you have a problem with someone taking apart their knife and examining it because he thought something was wrong with it. He didn't bash the knife, didn't tell you to buy it or not to buy it. No bias in his video. And your "buy, throw away and buy a new one" mentality is exactly why there's so much sh*t in the landfill and oceans.