P1P vs P1S: Which is better??

[@rDigital2A]

Tom's Hardware is lucky to have you. They are a great outfit.

[@stldenise]

Thanks!

[@BreakingElegance]

I wish i waited i fully enclosed my P1P myself and bought a bunch of components to do which costs me more then the P1S to do. the Non-touch display does suck though but hey 80% of the time I use my computer to control it

[@bladeboysfv5646]

Thank you for the help on deciding that there's no point in the p1p if I can get the p1s for only $100 more I'm going with the p1s thank you

[@trykozmaksym]

Good stuff, straight to the point. Thank you.

[@JonLaRue]

I am excited to upgrade my P1P to a P1S. I would love to see print comparisons vs a Prusa MK3 or MK4 on a 0.2mm layer height as well as a fine layer height like 0.12 mm.

[@stldenise]

Great suggestion! I can make that happen with an MK4.

[@NoIPHU]

The TPU can adhere very roughly to the PEI sheet, which is probably why it is not marked on it.

[@SkiPump]

Just a heads up the camera on your P1P is installed incorrectly. It shouldn't wiggle like that. I don't even use my camera anyway lol but just figured I'd let you know!

[@johansrk]

I prefer the P1P. But I am also only printing PLA. the P1S has problems with PLA because it becomes to hot inside the chamber, so you need to have the door open. As for the extra cooling, that is not needed on P1P since it is open. Also the P1P is a cheaper buy :)

[@hevak17]

Your video is very good. Could you please compare Bambu Lab P1S and Creality K1C? It would be great

[@stijnjans494]

Is the build plate still coated on each side ?

[@stldenise]

Yes! Double sided.

[@jeremy_makes]

Great video!

[@richardbertacchi5016]

So......$100 more for an enclosure, and carbon filter.......They had me at enclosure.....

[@Reckless5040]

And the aux fan

[@KanielD]

@@Reckless5040there was a time I spent almost that for just an enclosure

[@richardbertacchi5016]

@@Reckless5040 We did add the curtain fan to the P1P after the fact. Forgot about that.

[@sliverbaer]

No fan for you 😂