I may be biased, but no one deserves a vacation more than the mechanic! Have a good one!
@johnmcgreevy7423 жыл бұрын
If anyone deserves a vacation, it's you Warren. I'll pass the time taking my lawn mower engine apart, and pretend I'm you LOL!! Thanks for the video, I always learn something
@gunslinger35773 жыл бұрын
ONE HELL OF A GREAT LOOKING BLUE BANNER, WARREN!!!! Have a great time and ELAX!!
@scrotiemcbogerballs82863 жыл бұрын
Take care buddy thanks for everything be safe and relax on your vacation those boys will take care of everything while you’re gone
@bballer182ify3 жыл бұрын
Hey Warren. Love your videos. About the turbo. When those vanes get stuck you can soak the unison ring and all the vanes in oven cleaner (just make sure it has Sodium Hydroxide in it). That will completely remove the carbon build up. Did it on a turbo I built for my LBZ. Just don't get the oven cleaner on the aluminum. It'll eat it. BTW, LB7's were Borg Warner waste gated units and every generation after has VGT. LLY, LBZ, LMM, LML, and L5P. Have a good one. Keep up the good work. 👍🏻
@richardhoneywell74113 жыл бұрын
Enjoy your vacation Warren. Keep up the great work and videos. Really enjoy your videos while I've been off work getting my knees replaced.
@michaelmcdonald67273 жыл бұрын
Great video Warren. You and the family deserve a vacation! Thanks for sharing!
@seantatham99603 жыл бұрын
Fantastic content Warren!!! Hope your generator is recovered ASAP...... and your much needed vacation goes well!!!
@KG-yn9qi3 жыл бұрын
And have a great time off, tell Mom Hello from all the fans and wish her all the best and health! Enjoy have fun!!!
@Gordonseries3853 жыл бұрын
Thank you for showing. Never seen rings like that on top of the cylinders. Take Care!
@danreaman24193 жыл бұрын
Those rings are used to scrape carbon build up off of the piston. All the build up (trucks conforming to newer emissions standards, EGR, DEF, DPF etc.) Was causing liners to glaze in turn causing issues w/ massive blow by and oil consumption.
@Gordonseries3853 жыл бұрын
@@danreaman2419 Thank you Dan for that information.
@johnmclaurinmclaurin9243 жыл бұрын
The new isx cummins has them
@Prariedog3 жыл бұрын
I caught the cool banner in the corner.keep up the great work Warren
@ko94463 жыл бұрын
I have talked to 2 types of PACCAR engine owners. Ones that love them and ones that hate them. Haven’t found any in between. As far as pulling the liner that way, I have never done it but I will keep this in the back of my mind as you never know.
@anthony16363 жыл бұрын
In love mine it really has been the most reliable engine I have ever run. 2014 pete. 1.1 million miles and still going strong.
@mypersonalopinion53633 жыл бұрын
@@anthony1636 i have a 17 pete with 345k. I can only keep my fingers crossed for that kind of use out of it. I take good care of her and so far so good but with so many rumored horror stories I get nervous. At the same time thinking of getting a second truck with a paccar because its the engine I know the most at this point. Anyways glad to read your positive news about your truck. May it keep financing the dream until u retire it by choice and not force.
@Whoisderon3 жыл бұрын
@@anthony1636 I have heard when it’s deleted you’ll be able to get 1 million plus out of the engine
@jongraff69313 жыл бұрын
As long as you didn't gouge the lower bore, your golden! You do what you have to do, some of the special tools are Very expensive! If you're going to make a mess do it right!!! Great videos, thanks.
@Prariedog3 жыл бұрын
Enjoy your family vacation,great video Warren,thanks for sharing .looking forward to new videos in the future .safe travels.
@melvinschmecklebak37663 жыл бұрын
I have pushed out liners the same way. A person has to do what he has to do when you don't have proper tools for liner removal. Good work Warren
@jamestaylor14813 жыл бұрын
Warren you are a good mechanic
@martinharper51123 жыл бұрын
Enjoy your vacation Warren. Well deserved. Good show.
@thegeneralstrike67473 жыл бұрын
You know what Warren you are the shit! Those of us who matter know this. I hope you know that you are a Mechanic's Mechanic and I am honored that you are so willing and do share your absolute plethora of knowledge, your struggles, and triumphs, your philosophy, and most of all just you plain and simple! Don't read them comments, the haters will hate, mostly they hate on themselves and we all know that. You are so beautiful to me can't you see? jk Have a fantastic day, know that those of us who matter love and respect you and always will! Keep on keepin on and remember to be good to you Warren you deserve it! For all you do, were your Buds too!
@michaellacross20593 жыл бұрын
Love your KZbin channel. Keep up the videos. I'm a dairy farmer in Vermont
@seantatham99603 жыл бұрын
What part of the 802?
@suzylarry13 жыл бұрын
hope the weather stays nice while visiting. 2 Christmases' ago , you were going to take the Miss's out for dinner date and you got tied up on the service truck , so NOW is the time for you two to enjoy some time.
@gwbuilder57793 жыл бұрын
Looks like typical Pacific Northwest climate change weather to me, Warren. Lol It's the exact same weather I grew up with in the early 60s all the way till now. The winds through the gorge are something else too. Watching you with that flashlight in your mouth cracked me up, I still do that now and I have headlamp. Hahaha... Old habits are hard to break my friend. The pistons on that Paccar engine look pretty clean for 800,000 miles. I expected a whole lot of carbon buildup from the emissions system. Quite surprised actually. I guess the good news is that you won't be worrying about putting it back together until you get back from your vacation.
@johndeerekid1673 жыл бұрын
I didn't know anyone actually had Paccar motors rebuilt. Thought when they blew up they all got replaced with a craigslist Cummins.
@HUBBABUBBADOOPYDOOP3 жыл бұрын
Hey, good morning, Warren. Thanks for the video! Please be safe. Many people count on you.
@mongomay13 жыл бұрын
I know the cords on those old style fluorescent work lights were a pain, but the ones with the wire hangers were really handy and bulbs not too hard to change might be better than a head lamp.
@TheLoneWrencher3 жыл бұрын
Thank you for all the wonderful content
@billbord32053 жыл бұрын
Gee warren when you opened the shop door I thought you’d had a break in,,heh heh .good vid
@nfarnell13 жыл бұрын
Num 1 cylinder is usually the hottest one, what is your opinion on why the multiple cracks? Way back when I was young cracked heads were way more common than today. IHC UD16,18 and 24 helped my buy my first house with cracked heads. good of you to help your customer out.
@f0rumrr3 жыл бұрын
86k subs damnnn 100k getting close and you deserve it.
@westerntruckandtractorrepa13533 жыл бұрын
Seems like it is taking forever to get there
@f0rumrr3 жыл бұрын
@@westerntruckandtractorrepa1353 Ya cus your too real for youtubes like so they dont want to promote you. But stick with it, it will happen.
@trevormansfield64953 жыл бұрын
Ive never known you to have a holiday, ive been watching for years. You must need it Warren.
@Jasonhb073 жыл бұрын
I'd need a holiday every two weeks if I worked as hard as Warren.
@chuckokelley7566 Жыл бұрын
I noticed this video is about a year old. Just wondering how the rebuild is doing. My paccar mx13 developed a hydrolock the last trip out. My mechanic who is certified with paccar motors, recommended not doing a rebuild and to just put another motor in the truck. He said he has had trouble with the head gasket holding up. Just curious your thoughts. Thanks!
@rsmith65723 жыл бұрын
Warren, like your getter done attitude.. What ever it takes.. That come from being a navy guy, if your in the middle of the ocean you fix it or sink. Sink is not an option. have fun visiting you family.
@ianwallett74383 жыл бұрын
Have a good time Warren!!!!! 👍
@disturbedcarrot3 жыл бұрын
As always, top notch video!
@bryansimon40723 жыл бұрын
Don’t play to hard and don’t forget to come back to us poor shade tree guys, we need you.
@joerangel6112 жыл бұрын
Warren Good evening, Thank You for sharing this video. Kindly would You please share with us, the cost for the spare parts used on this inframe. Thank You
@Zak69593 жыл бұрын
Well I’ll tell you, the farmers in western Canada would love to see that snow for the crops. We had a pretty short winter and not much precipitation for planting season in the future. I have an old joke for you. What’s the difference between a farmer and a baby? A baby stops crying when you give him a bottle. Hahahahaha. You don’t need a headlamp, you need a floodlight under the truck, just like the old school. Started doing a clutch job on a Peterbilt today and broke out the old flood light, works great. Not LED but old-school incandescent, keeps you kind of warm in the winter if you know what I mean.
@Romuls7533 жыл бұрын
I wonder why the head failed like that, did it just get too hot and it cracked?
@seasonmechanic2 жыл бұрын
Warren you ever use Permatex 80019 Aviation form a gasket ? It’s some good stuff for oil pans . Or things you can’t get a gasket for . Just put a light film of that on it and it won’t ever leak .
@philglover29733 жыл бұрын
Warren thanks for your time God bless you and your family 🕊️ 🕊️🕊️ have a good vacation 👤👤👤👤👤
@kellykonoske913 жыл бұрын
No Mr. Watson, the JOKE is in the White House as we speak! Thanks for the videos Warren. I appreciate all you do. I tell my kid to watch your videos. He just hired on as lead (and only ) mechanic for a construction co. on the northern Oregon coast. He also will be working on about everything. Todd Konoske the retired trucker.
@prevost86863 жыл бұрын
Powdered metals work great to customize allloys for stuff like valve seats as long as the manufacturers have strict QC standards. Unfortunately I cannot think of one seat manufacturer that isn’t in China anymore.
@bombardier3qtrlbpsi3 жыл бұрын
Look at that nice blue and white sign you see when you walk into the shop.
@dont90983 жыл бұрын
TRUMP 2024
@ivordripatmenose82523 жыл бұрын
How’d that work out for ya ?
@dont90983 жыл бұрын
@@ivordripatmenose8252 It's Not 2024 yet
@jimloy34673 жыл бұрын
Impressive improvising
@rdecoster13 жыл бұрын
Pretty cool to see the inside of the turbo!! What would happen if you just use the damaged wheel? It didn't look too bad. Maybe a little less boost is all?? You can fix anything!!! Have fun on vacation.
@michaelowen17503 жыл бұрын
The turbine turns upwards of 20,000 rpm..any imbalance is greatly magnified, which causes bearing and seal failures, and, there could be cracks in the wheel itself caused by the impact- it could fail and ruin the housing... Hopefully a new turbine wheel is affordable enough to replace.
@stevehetrick26763 жыл бұрын
Turbos spin upwards of 110,000 RPM's ,so perfectly balanced wheels are an absolute must... If there is any damages, replace. Period.
@larissawos72603 жыл бұрын
Hallo Warren greetings from Hannover ! ( Germany)
@westerntruckandtractorrepa13533 жыл бұрын
Hello my friend.
@kylekearns12693 жыл бұрын
It must be valve season. We are a small shop in wisconsin that fixes anything that comes our way and In the last couple weeks we have had 2 n14s drop valves a mbe4000 break half the head off a valve a 3rd n14 drop a valve seat. And a c10 cat cam fallower fall apart
@thomaskirkpatrick40313 жыл бұрын
Hardest working man on UTube.
@bentaylor83423 жыл бұрын
Enjoy your well deserved time off with your better half!
@jimjones16783 жыл бұрын
Warren.......Area Diesel Service offers turbo rebuilding and parts. I think they have a location in Iowa.
@michaelmcclure86733 жыл бұрын
Wonder if the folks at Blaylock down in Kansas can help you with any parts for the turbocharger ?
@Papajur3 жыл бұрын
How many shops do you own? 🤗
@justinmiller21863 жыл бұрын
Hey not sure if it’s deleted, but if it’s not there are 2 exhaust lines about 1/4 in diameter, one of them is like 2 feet long. I think saw it on that bench, make sure it’s not plugged because when it’s plugged it will run like shit and have no power it reads manifold pressure I think. That might be why the turbo was seized from never being told to actuate.
@fireantsarestrange3 жыл бұрын
And to think it was 88F yesterday here in FL.
@timmay2k3 жыл бұрын
FYI I’ve had two paccar mechanics that did in frames on mx13 is a waste of money. They never last. My mx13 in 2016 Pete 579 has 968k miles on it only did the main bearing bc my mechanic said everything was super clean 😎
@josdaalmans69773 жыл бұрын
Enjoy your holiday, get some rest and stay healthy.
@lenhofer32143 жыл бұрын
Warren u need a set portable mobile column lifts....thats bloody murder doing that job on ur back ...u couldnt pay me enough to do that kind of work without my column lifts...
@juniorutah60663 жыл бұрын
thanks warren. as always
@paulgamble94233 жыл бұрын
God how cold is it there you do a great job sir!
@johnbarber52803 жыл бұрын
Good work, have a great well deserved holiday
@jerryglen9863 жыл бұрын
W. A. R. R. E. N. H. E. L. L. O. 🤠🤘🏻
@westerntruckandtractorrepa13533 жыл бұрын
Hello
@elroyelblander62773 жыл бұрын
@@westerntruckandtractorrepa1353 how much for the E model head?... Great videos 👍
@brianrutherford32293 жыл бұрын
Thought the long punch idea was cool and it worked great.you need a trouble light instead of the flashlights.sorry to hear you had your generator stolen.the sign of the times I guess
@ЮрійГлівчук-н1б3 жыл бұрын
Hi from Ukraine, I have a problem with the John Deere 7600 tractor with powershift transmission, at low engine speeds the transmission makes strange sounds, sounds like something rattelling around, is strongly audible in the rear of the tractor, when the engine speed increases to 1200 rpm and above the noise subsides , maybe you had similar situations? The input shaft, yoke, bearings on the shaft are replaced with new ones. I will be grateful for any answer.
@michaelchamberlain46183 жыл бұрын
Your voice has brought up old memories. When I was in the service. As if I know a or have meet you?
@lopezaldana73 жыл бұрын
I believe Warren has mentioned he was in the Service, Army I believe.
@bradevans84703 жыл бұрын
You can go to autozone and they have some penlights the brand is police security and they have a clip on them I turn the clip around so I’m able to stick them on my hat when I need to use both of my hands
@bradevans84703 жыл бұрын
And it’s also an led light just like the one your using
@alanmc663 жыл бұрын
Your videos can't come quick enough for me Warren, but wonder have we missed one, this looks like your shop at home? What happened to the lube truck, I was really enjoying that saga.
@blacksmoke50093 жыл бұрын
Thanks for sharing bud you take care now!👍
@kikin123ist3 жыл бұрын
What is liner protrusion spect?
@davecatton87733 жыл бұрын
has it bent the rod ?? check it soft lad !
@bcbloc023 жыл бұрын
No idea if they are any count but you likely can find a turbine for it on ebay from china. Another good bet would be Area diesel in Illinois. Tell them Brian Block sent ya. They will hook you up if they can.
@thomaskirkpatrick40313 жыл бұрын
What do you think about the MX engines?
@paulcrocker28373 жыл бұрын
Well I'm going to miss you, have a great time👍
@coreymcdowell34713 жыл бұрын
My brother needs to piston slap his 6.4 power stroke but never heard of piston slap a paccar 🤣 my family’s friends peterbuilt has a paccar in it are they ok Engines??
@heavymachinery28433 жыл бұрын
Good work warren pleas could you make a toolbox tour 👍👍
@rhunter34063 жыл бұрын
Mx13 in a kenworth t660 is a NIGHTMARE to replace the rear injector transfer tube- have to unbolt the cab and jack it up to remove.
@mongomay13 жыл бұрын
Get an old slide hammer and weld it to a vise grip plier to make yourself another type puller.
@dougcooper60043 жыл бұрын
I have a slide hammer that screws into a vice grip at the adjuster nut, pretty handy. Your idea is good.
@dantew67083 жыл бұрын
imagine a vgt turbo on a old 400 cummins
@scruffy61513 жыл бұрын
Enjoy your time off.
@williamgleaves19543 жыл бұрын
You could try the baseball hat with the lights in the bill.
@ruchithperera48213 жыл бұрын
Have a mx13 2013 model need torque specs on cylinder head…
@rustyshank9123 жыл бұрын
I got a Cummins 8.3 out of a 93 Ford L8000. Noticed the cam gear has some damage. Just to clarify that gear is pressed on and I have to remove the cam, remove the pushrods, have the engine upside down to keep the lifters out of the way to replace the gear or am l wrong.
@JasonTAho3 жыл бұрын
You can cut some wooden dowels (3/8" I think), tap them into the top of the lifters and pull them up, secure with zip ties, or rubber bands etc. Just tie 2 together and they'll stay up
@stevehetrick26763 жыл бұрын
It is possible to use strong magnet's to hold up the lifter's off of the cam, use clothes pins to hold up the magnet's at the top of the block. Yes I did this to change a cam & lifter's on a John Deere 4430 tractor engine, with the engine still in the tractor! Yes I had 1 magnet, so I had to go to 4 different parts stores to buy 11 more magnet's! Lol But it worked!!! 👍
@rickjohnson16323 жыл бұрын
Good video 👍
@robertrpenny Жыл бұрын
Those are supposed to be made by Cummins so not surprising the turbo is the same
@MrBusdriver633 жыл бұрын
Hi Warren from Australia
@westerntruckandtractorrepa13533 жыл бұрын
Howdy
@michaelchamberlain46183 жыл бұрын
That throws it apart in about 25,000- 50,000 miles.
@christopherfarabaugh20343 жыл бұрын
I'm not sure why people run those DAF/Paccar big bore engines. Big money for parts, service and just doesnt have the support of cummins, cat, or detroiy
@eugeneoreilly93563 жыл бұрын
Paccar(DAF)Volvo,Scania(VW)and Mercedes(GM)are all we see here in Europe.
@dennisbailey42963 жыл бұрын
I figured you needed some head lights. So I sent you some. Mini LED Clip-on Headlamp Rechargeable Sensor Cap Hat Lamp Headlight Torch Light Quantity: 2 You should get it by Thu, Mar 25.
@westerntruckandtractorrepa13533 жыл бұрын
Thank you for that. Highly appreciated.
@dennisbailey42963 жыл бұрын
@@westerntruckandtractorrepa1353 Your tracking # USPS tracking #420976039200190288588700200715
@waynep3433 жыл бұрын
Snow is probably being caused by a new volcano fissure erupting on the kamchatka peninsula .. dumping ash into the weather fronts crossing the Bering straight. the ash has just the right size to attract enough moisture to make rain and snow storms.. where the smog particles coming off cities in china are too small to gather enough moisture to make more than clouds that don't create rain or snow.. there is also a huge dust storm over Beijing right down.. probably blown north and east off the Sahara.. most of the dust off the Gobi desert blows east into the pacific and across the Koreas and japan.. just thought you might like a why other than a fist full of grease.
@bigkenny933 жыл бұрын
Ahhhhh......it's China's fault.....got it! Lol
@deanmills51063 жыл бұрын
I don't laugh at clever, nice job.
@andrewgallier64523 жыл бұрын
have great holiday you deserve it
@HUBBABUBBADOOPYDOOP3 жыл бұрын
I'd throw that turbo in a bucket of ATF and go on vacation.
@stevenmolloy15083 жыл бұрын
Area diesel service for turbo parts watch wes work (another youtuber) did a full tour of there place
@JACKATTACKED3 жыл бұрын
👍
@steamboat13413 жыл бұрын
You better get a patent on your liner puller, I'll bet you see it in the local snap on dealers truck next week. Enjoy your vacation.
@Romuls7533 жыл бұрын
All in all I think if I bought a truck I'd avoid a Paccar engine, they really don't seem to be that great. Well designed for what they are though, designed to separate unwitting operators from their money because of high maintenance costs
@hondaguy425able3 жыл бұрын
The government is ruining diesel engines with all their mandates.
@BORIKKEN3 жыл бұрын
Including gas engines
@westerntruckandtractorrepa13533 жыл бұрын
Working people in this country need to get some back bone and tell them to go to hell.
@lanequarles32013 жыл бұрын
@@westerntruckandtractorrepa1353 amen
@AgustinCesar3 жыл бұрын
Ice road trucking :), or snow
@Dennis379c163 жыл бұрын
Thanks Warren just one more reason to stay away from the paccar engine. Take some time off.
@BossmanEight3 жыл бұрын
Need to get yourself some headlamps. Much easier on your teeth. Ask me how I know.
@cluckhead19133 жыл бұрын
He's gat a headlamp that a viewer sent him. He seems to like the taste of his snap on light too much to try anything else.
@PoliticalGangster3 жыл бұрын
Too much meth?
@dirtyroofer36783 жыл бұрын
My kid bought me a hat with a built in light , it works great.
@HUBBABUBBADOOPYDOOP3 жыл бұрын
*@**17:36* "Professionals" laugh? "Professionals"? What do you think our Great Grandfathers did? Get on KZbin? Watch a "How To" video? No. He chained stuff to a sturdy tree, pulled parts, even reworked and repaired stuff, by himself. Crops had to go, make money, hungry Families. "Professionals" are hugely over rated. Jack it up, use it's own weight, tap it out. You're 110% correct, Warren. IMNSHO- you know what severely cracks a head like that? Over heating from over revving the piss out of it. Some hot dog that doesn't know how to drive ruined that head.
@tommyk10733 жыл бұрын
Warren, I was quite proud to see your Trump flag..BTW, streamlight makes a nice rechargeable head lamp..got one from my snap on dealer, I like it a lot..keep up the great work!!