Paccar mx13 part something or other!

Setting the valve lash and rolling the main bearings in the paccar mx13. Thankyou for supporting this channel. paypal.me/wlrf...

[@larryesmith5060]

The variety of Machinery that you work on Warren you are one knowledgeable mechanic

[@paulteirney3587]

Great to see you relaxing with the dogs and enjoying a refreshing drink after a weeks work. Keep it up.

[@TYSuggested]

I'm gonna remember the trick with the screw to roll those bearings out! They can be a pain. Thanks for another video Warren. Take care.

[@mikeyarbrough3065]

If I may take just a moment of your time to say thank you for your military service, your on-site on not just heavy equipment but on your personal views. As a law enforcement officer I can not say what I want as it is against the rules and will get me fired. Knowing there is someone like you out there able to speak his mind makes me feel good Keep up the videos and my the good lord bless you and your family with the power to conquer all evil and obstacles that lie in front of you Mike Y St Louis

[@westerntruckandtractorrepa1353]

Thank you, and yes there are plenty of evil obstacles facing us these days, keep safe out there with all the craziness that's going on.

[@johnnyholland8765]

While nothing compared to what you deal with I have rebuilt the engine on my old B model John Deere tractor. You have been a tremendous help. I used some of the methods of assembly I have watched you use. Ex torqueing and marking fasteners, installing piston rings etc... While only a two cylinder methods are the same. I had to deal with repoured (by Harts Machine in Ohio) babbited mains and rods using shims but that was no problem. I am now starting on the transmission. I need to replace some bearings. After seeing you tear into transmissions that should be no problem either. Thanks for making videos. It sure helps a layman such as myself understand how things come apart and go back together. While I have decent mechanical capabilities your videos are a big help. Thanks again...

[@westerntruckandtractorrepa1353]

You bet, take care.

[@greglammers9905]

Glad to see you enjoy a drink and relax. Thanks for the videos

[@Garysplace]

I'm thinking about buying a truck with a MX 13 in it and thought I should learn something about it and found you. You do good work bud,

[@derrillbalshaw1199]

Well, there is nothing wrong with a cool refreshing drink to relax after a hard days work. Have a great weekend Warren, chill and put ya feet up.

[@dieseldudeky894]

Thanks for all the time you put into making these videos

[@billdlv]

Enjoyed that bit at the end with you and your crew!

[@attws480]

Thank you for the excellent videos. I'm glad we got to see your dogs 🐕❤

[@twwtb]

I always enjoy seeing the dogs. They're good ones. I think you interrupted Daisy's nap though.

[@ollie-lk5dx]

That screw trick works pretty slick, Like learning tricks of the trade.

[@masongillespie4360]

Wish I could take a vacation and follow you around for two weeks. I’d learn a ton and have a blast doing it. Thanks for the videos!

[@rodneyskinner7741]

Appreciate the way you always take the time to do the job right Warren, a real craftsman! Good video! Boca Raton, Florida

[@phillipchurch1851]

That's great little of tip for rolling bearings thank you for your knowledge

[@robertprice5038]

When I was wrenching in the 70's we used a brass brake rivet in the hole to spin the bearing out. Brass won't scratch the steal.

[@gwbuilder5779]

Have a great weekend Warren and the Mrs. A CR👑 is a pretty good way to start relaxing.👍

[@eppot1]

Nice seeing you relaxing.. a must do !!

[@doglaslondon7904]

Sunday for me just rebult 2jz Toyota in lexus l 300 very good motor then I find you had put video up so had a good afternoon watching that and a beer good stuff

[@noseeum6385]

Haven’t watched past 5:17 but I am comfortable saying this early in the game, whoever the young person is that will shortly be working with and learning from you that they are in for the experience of a career/lifetime. For several years I have been an avid consumer of your wisdom and work ethic. One must be both wise and humble to be honest and successful: you are present on both fronts. And forcefully so. I enjoy learning from you, a young 70 I am, but the depth and width of your expertise have captivated my attention like things would years ago when my mind was not restricted as it seems to be now. I owe you a debt of gratitude for that gift. Back to the rest of the show!

[@lw4609]

Beautiful Saturday afternoon as you say Time to kick back and relax hope Sunday is just as good keep it up

[@markreetz1001]

That was very interesting how you change crank bearings. The dogs look to be having fun!

[@imtimrich]

I like the screw trick, nothing like old knowledge “ you can’t get that in a book”

[@johnmcgreevy742]

Great video, great cocktail, great dogs, great family! Doesn't get any better. Warren, when the goings on piss me off, I watch your videos, and it puts me back in line lol Thanks

[@CAPNMAC82]

Looking good, Warren. The sunset, too.

[@Gordonseries385]

Nice day chillin out with the crew, Thank you for sharing Warren

[@scrotiemcbogerballs8286]

Always a great video buddy thanks for everything love listening to you my friend take care and hope you relax with family

[@RobertSmith-fv3ux]

Thank you for this,I'm ahgv mech been doing it for 46 years never seen brgs put in like that ,just brilliant Love the dogs Rob

[@davidjackson4112]

Warren, those beautiful dogs sure do love you,. Thanks for making great educational videos.

[@calumanderson5617]

Hey Warren, thanks for the video, needing something to watch. Thank you.

[@BD-qq4fn]

Another great one! (Neat trick on getting journal bearing out). Love the ending of the video....thank you Warren.

[@RandallMoore1955]

Hello Warren, Always A Pleasure Watching.

[@rockeerockey6941]

Warren, excellent video indeed! A remote Mic would make a better viewing experience. Loved the doggies

[@dieselhatz4247]

Great video, you seemed pretty relaxed whether it’s the job or the weather, good to see. I’m miserable as hell through the winter, and soon as the sun comes out I’m a new man with all the energy in the world. That’s some amazing scenery round your way, looked lovely with the sunsetting and the dogs playing. Hope you enjoyed your wife with your better three quarters 😀.

[@giggiddy]

I'd be scared to death to scratch that crank shaft journal with my screwdriver as there's nothing simple that I can't screw up. Love watching you brother.

[@stuartlockwood9645]

Hi Warren 😃 nice video, and the doggies at the end while you drank a sundowner were just great, that cat sounds an interesting job, stay safe mate, best wishe's to you and your's, Stuart.uk.

[@d6c10k4]

Cat makes a tool special tool to roll bearings in/out. Has a pin for the oil hole and a little flat bar pinned to it so it will hinge to match the angle of the oil holes (straight or angled). Works good.

[@edgonzalez1871]

Thank you for the videos Mr Warren. 👍

[@brianrutherford3229]

Love seeing your dogs.i am a dog guy all the way I bet she was drinking it.but if you leave a drink where they can try it just like a kid the dogs will luck a big up and taste it.

[@johnnybuss5637]

Smart tip with the bearings, thank you. Nice that you can take it easy too 😉 👍

[@briangodbey5511]

Great videos i always wait until beer drinking nights too watch

[@patreilly6826]

Enjoy the videos Warren. I hope you enjoy your evening with the MRS.

[@kevinsuminski7167]

Love seeing the pups especially Daisy haven't seen her in a while.

[@kerryshearer8937]

From Alberta Canada we sure use your knowledge in the oilfield the only thing you net need is your long johns to keep you warm.lol

[@Prariedog]

Another great video Warren , thanks for sharing

[@rdecoster1]

Those dogs are eating very well!!

[@philglover2973]

Thanks for the video Warren you have a great weekend 😊

[@westerntruckandtractorrepa1353]

Thanks Phil.

[@chucksteele4787]

I use a similar way to push out bearings. I use a cotter key with the legs folded out into a "T" and the loop end in the oil hole. It's what they say, what ever works best for you!

[@justinhowarth9211]

It's a excellent trick i use a nail to get them out then a split pin to roll them back in just a bit softer and pushes it level to the block

[@mattcoy2817]

I always loosened the main caps alittle middle one last and that made rolling bearings in and out really easy

[@westerntruckandtractorrepa1353]

I don't like all the weight of the crank resting on the seals.

[@johnmorgan5377]

Hi Warren that’s just how I do my mains it’s a good way best wishes phill from England oh love your mini dachshund my mum used to breed enforcer work

[@briangodbey5511]

Seems like your dogies keep you sane with the stress level you must deal with

[@rickjohnson1632]

Those are some rod cap bolts ! 😎👍

[@giggiddy]

Right? Looks like something used to hold a bridge up!! Lok

[@blanequilhot6876]

Keep it up Warren - Love the channel

[@johnwaby4321]

Nice one getting there 👍👍👍👍enjoy your drink 👍👍👍

[@HUBBABUBBADOOPYDOOP]

Thank you for the video, Warren. Please check Daisy's paws- she's walking funny, like a sliver between toes? Strap a cheap dash cam to Lulu!

[@Ham68229]

Those Paccar's just seem like a "complicated" engine. Now, that's a new trick, learn something new every time I watch your videos. Where's Duke been? Great video as always, cheers :)

[@johnmorgan5377]

That’s amazing Warren

[@michaelparker5814]

It's nice to see you relaxing with your pups I just got back from a taco bell run with my pup loki we wanted tacos

[@lukemorgan6261]

As always Warren cracking video, can you cook?😂😂 enjoy your weekend. Take care. Regards, Luke 🔧🇬🇧

[@ianleonard2829]

nice looking truck that cat

[@robbybachmann332]

Nice ending to the video and your work week...

[@northwoodsguy1538]

Enjoy! 👍🐶🐕🐕🐶

[@bentaylor8342]

As always, you earned it, Tks!

[@jeffo881]

if you make a "T" out of aluminum welding filler wire and put it in the crankshaft oil hole, when you spin the crankshaft it will roll the bearing right out, the aluminum is soft and not likely to scratch the crank.

[@danielslawnandyardcare4398]

No rest for the wicked keep killing it

[@danlabelle6210]

Nice too see enjoying the dogs

[@richardbohlingsr3490]

I imagine big bird will be happy to get her wings back.

[@gasperajdnik5627]

Good work as alwais 👍

[@ianleonard2829]

enjoy that drink and relax

[@jeremysanchez9973]

Hey sir , love your channel way up here in Alberta Canada. Looking for some advice if you have a moment

[@blake9361]

good vid luv the dogs

[@gregbird6615]

Good looking dogs

[@scruffy6151]

👍👍

[@dimitrirens5490]

Je bent echt een vakman Warren gr Dimi uit Belgium

[@aqkboone]

Love the video and infor on how to do things but where the close captions

[@suzylarry1]

Warrens soft spot ....puppy dogs

[@rodneymiddleton9624]

Thanks Warren!

[@DG2244]

Super video!!!!

[@brettgoodman4360]

Looks like the same Okie method I have always used to roll bearings in and out.

[@longliner205a4]

Do you ever use the button method for rolling mains?

[@samuelsolispartida1897]

hey friend, you have the torques of the bench and of the viela and of the plate that has screws of 18

[@AtomicFarmer966]

I went back and started watching some older videos, and you were working on an old worn out case 680b backhoe. Did ever go ask about the CAT 9u you saw on the way there?

[@rossnolan2883]

Brilliant 😊😊

[@alw7810]

What brand heavy duty truck scanners are you using for paccar?????

[@andrewhansen2406]

What software do you use that tells you all the torque spec and own procedures?

[@MB-rh2yf]

When do you need to check the fit of the main bearings on the crankshaft (plastigage)?

[@mikepaul3959]

Is there a reason you don't break all of the main bolts loose first (just a tad - 1/18 turn or less) to make it easier to roll the shells out/in?

[@westerntruckandtractorrepa1353]

Don't like all the weight of the crank resting on the seals.

[@dharmi44]

Always was trained to tighten journal mains and rods with an torque wrench 🔧 in a static smooth pull as you torque the caps down........am I wrong in thinking using an impact wrench with an dynamic action, puts stress on journal bearings? Just asking, not in any way critiquing Warren’s work, I completely understand why he did what he did.....

[@jiml9971]

I’m wondering how the pacar engine runs.

[@kennethkaczypenski6224]

Ain't nothin better for the inside a man than the outside of a horse or dog! And an adult beverage (or two) doesn't hurt much either ;=)))

[@hddm3]

Never worked on one of those cat trucks yet. Gona be cool

[@JACKATTACKED]

👍

[@adriannicholson8819]

the new cat truck is nice but everyone I've come across always has pre-pump problems and bad codes refer to the model before this one for the fix

[@briangarland9883]

Love the vids! Question, are you having issues getting issues parts out of Cummins?

[@westerntruckandtractorrepa1353]

Yes.

[@markpontes4457]

How expensive are Paccars to rebuild compared to Cat or Cummins?

[@westerntruckandtractorrepa1353]

Very expensive, the parts compared to other brand are quit a bit more.

[@duaneledford2590]

Did you get that engine swap done that was in your home shop? Maybe I missed it.

[@ryanhogan6509]

Oh yeah, late night video.. for us east coast guys..lol

[@edneialmeida7612]

Boa noite um bom serviço meu amigo