Painting Warmachine & Hordes: Menoth Castigator

[@homelessjoe]

I am a marine biologist. That was hands down the closest representation of screaming large mouth bass I have ever heard. Uncanny.

[@SchnauzerFaceMinis]

Thanks! I am a big fan of Explosions in the Sky -- great music to play while painting!

[@FallenlegionMinis]

I wanted to say thank you, I have been painting for a long time but while watching your vid I still learned tons of new stuff! Thank you!

[@SchnauzerFaceMinis]

Always happy to help! Any air compressor will work, but you'll have to take a few things into consideration. The big, powerful ones that you'll usually find in workshops will work, but some of them need oil to run and they're loud, too. that's fine, and you can just run a hose from the garage to your painting room. I use a smaller hobby compressor (TC-20T from TCP Global), which is quiet and oilless. I definitely recommend the TC-20T, by the way!

[@SchnauzerFaceMinis]

Thanks Fallelegion! I appreciate the kind words and support!

[@SchnauzerFaceMinis]

I actually looked all over trying to find the right barrels for basing, and then I just happened to find an old Tamiya box set at my LGS. It's from the Tamiya Jerry Can Set, 1/48 scale. It comes with about a dozen barrels, plus a bunch of other WWII-era accessories. Really cool kit!

[@SchnauzerFaceMinis]

Yeah, the models will usually have mold release agent on them when they leave the factory, so a good rinse with warm soapy water is a must. I put them in tupperware with warm, soapy water, and let them soak for 30 minutes. Then I'll scrub each piece with a toothbrush. That'll also help the pieces glue together easier, too. I definitely understand -- as soon as I open a box I want to throw the pieces together and start painting! But the prep work does make a difference in the end, I think!

[@SchnauzerFaceMinis]

Thanks! It's a Canon 7D w/ 24-70 2.8L lens. I shoot @ 1080p/24fps at ISO 1000, f/16 and 1/50. I use two 300-watt lights while shooting, which get really hot! Editing's done in Final Cut Pro; titles & graphics in After Effects CS5; color correction in either Color or FCP (if I'm being lazy); and VO is recorded in GarageBand. For editing, I encode w/ XDCAM HD 1080p24 (35 VBR), and I do the final output through Compressor using H.264.

[@SchnauzerFaceMinis]

Thanks! It's a Canon 7D w/ 24-70 2.8L lens. I shoot @ 1080p/24fps at ISO 1000, f/16 and 1/50. I use two 300-watt lights while shooting, which get really hot! Editing's done in Final Cut Pro; titles & graphics in After Effects CS5; color correction in either Color or FCP (if I'm being lazy); and VO is recorded in GarageBand. For editing, I encode w/ XDCAM HD 1080p24 (35 VBR), and I do the final output through Compressor using H.264. Oh -- and the needle size is .15mm. Hope this helps!

[@Jcoburn134]

Your videos really set a new standard for painting videos. I love the blend of comedy you do and the voice over work, as well as the awesome high quality of the videos. Thanks for doing great work. On a side note I really hope you keep the focus on Warmachine/Hordes models, but I do appreciate you branching out and doing some GW sculpts.

[@SchnauzerFaceMinis]

Thanks! I use a Harder & Steenbeck Infinity airbrush, and I use it with the 0.15mm needle. I love it! Very, very good airbrush, for sure!

[@SchnauzerFaceMinis]

Thanks, man! Good choice to go with Warmachine! I do plan to do a video on my painting setup at some point. It's not too exciting, really. Just a cheap card table from Target and some shelves from Home Depot. I haven't got any immediate plans on doing a basic, beginner video, but it's possible that I might at some point. As far as brushes go, do yourself a favor and go with the good ones. Kolinsky Sable or Red Sable brushes are more responsive and will last longer than cheap craft store brushes.

[@SchnauzerFaceMinis]

Thanks! It's actually music from a band called Explosions in the Sky, but they're sort of in the same music family as Mogwai. Thanks for watching (and listening!)

[@SchnauzerFaceMinis]

Mine's pretty thick, too. I'd suggest giving the bottle a good shake before using it. But the Liquitex stuff says specifically NOT to thin it, so I use it straight from the bottle. It seems thicker than I'd usually want in an airbrush, but it actually flows pretty well.

[@SchnauzerFaceMinis]

Thanks! I usually shoot between 18-22. I find that's a pretty good spot for my tastes.

[@SchnauzerFaceMinis]

polishing the floor. j/k Also, the weathering pigments will suck it up and dry a little glossy, so they look like fresh mud. It probably takes like 3 or 4 applications -- the pigment can hold a LOT of floor polish! Sorry I didn't mention that!

[@SchnauzerFaceMinis]

I use a custom thinning mix, which is 50% distilled water, 40% drying retarder and 10% liquitex flow aid. I mix all of that up in a dropper bottle, and then thin about 2:1 thinner:paint when working with P3 paints. Always worked OK for me, but some paints do need more thinning (I've found P3 Arcane Blue, for example, needs a ton of thinner to flow through the airbrush smoothly!) If you're having trouble with clogging, try a ratio of maybe 4:1 thinner to paint, then scale it back from there.

[@SchnauzerFaceMinis]

I definitely strip it down and clean it thoroughly, but I've never had to wait 2 days for the airbrush cleaner to do its job. If your nozzle doesn't have any rubber o-rings or seals, you could try dropping it in a little bit of acetone. That's what I do. When I start cleaning, I throw it in the acetone and then start working on the rest of the airbrush. By the time everything else is clean, the gunk in the nozzle has been completely loosened up by the acetone.

[@SchnauzerFaceMinis]

Thanks! I actually don't thin the varnishes. The Liquitex stuff specifically says not to, so it might cause a poor reaction. To avoid clogging, I'd suggest increasing the PSI on the compressor, maybe up to the 28-30 range if necessary (I usually shoot paint through mine at 18-22 psi, which seems to work OK with varnishes so far). Also, make sure the airbrush, nozzle and tip are very clean -- if there's already some accumulated paint, it might make it difficult for the varnish to pass through.

[@photoeguy]

Really enjoy your videos and painting process. Its very inspiring.

[@SchnauzerFaceMinis]

I use a Harder & Steenbeck Infinity with the 0.15mm needle/nozzle. I love it! I've got buddies who use an Iwata HP-CS and a Paasche Talon, and they both do outstanding work with the airbrush. In the end, the time spent practicing with the tool is more important than the name on the side. Badger, Iwata, H&S, Paasche ... all make quality stuff! I went with the H&S because I wanted the really fine needle. but that's a personal preference.

[@SchnauzerFaceMinis]

Not a big fan of Vallejo washes at all. I got the Green Shade when I first started painting, and it's OK. It's a unique shade compared to Thraka Green, but, I really dig the GW washes (at least the old kind ... haven't given the new ones a chance yet). But I also find making my own ink or oil washes is a good way to go, too. Thanks for watching!

[@conflictchris]

wow looks fantastic, the colour gradient is so smooth, and kudos on the complimentary colour selection, the warm green is something new and really helps with softening the white :D had to sub...

[@SchnauzerFaceMinis]

Hi! Sorry I missed your previous question! I don't GW paints, but since they're acrylic I would not recommend thinning with turpentine. I'd use plain distilled water to thin GW paints. Out of curiosity, which of the new paints are you trying to thin? The different lines within the GW range will require different amounts of thinning. For example, the glazes should be good to go out of the bottle, whereas the drybrush and textured paints shouldn't be thinned at all. Hope this helps!

[@SchnauzerFaceMinis]

They do indeed make matte and gloss varnish. I haven't picked them up yet, but I'm sure I will at some point. I've heard great things about those products!

[@SchnauzerFaceMinis]

Q: When would be a good time for me to make more Castigator jokes? A: Casti-later.

[@SchnauzerFaceMinis]

Hi! The flowers came from Army Painter. If you do a google search for "Army Painter Meadow Flowers," you'll find the product. They used to sell them at my LGS, but it doesn't seem like they carry Army Painter tufts anymore. But you can snag them on most of the popular miniature online retailers. Hope this helps!

[@SchnauzerFaceMinis]

I use plumbers putty that I got from Home Depot. The specific type is Rectorseal Ep-400, but I imagine any kind of plumbers putty should do the trick!

[@C4ManMike]

are going to continue your painting videos kind sir? I haven't seen one in over 11 months

[@SchnauzerFaceMinis]

I don't plan on buying one, but if anyone at my LGS needs one painted, I would love to do a video on it! I'd really like to paint all of the Colossals and Gargantuans on this channel, but they're so expensive that I'll probably only buy the models I'll use in games. It's a pretty cool model, though, so I'd love to get a chance to paint it! Same goes for the Archangel, Galleon, Conquest, Hyperion, Woldwrath, that Cryx thingie, and probably the Mammoth, too!

[@SchnauzerFaceMinis]

Thanks! I started using an airbrush in August 2011. So about a year and a half now (wow, time flies!) But I guess it would have been about 9 months when I posted this video. Thanks for watching!

[@SchnauzerFaceMinis]

Awesome! WM is a great game. Good luck with Menoth! For an airbrush recommendation, it's hard to say. It depends on your budget, how you intend to use it, how much you paint, etc. I'd suggest looking at airbrushes from one of the 4 major airbrush companies -- Iwata, Harder & Steenbeck, Badger and Paasche. The Iwata HP-CS is really nice. I love my H&S Infinity. The Badger Patriot and Badger Krome are quite popular in the community, and I used to use the Paasche Talon. All are good airbrushes!

[@SchnauzerFaceMinis]

I've never tried sealing it with a brush-on varnish, but if you don't have an airbrush, you can use Testors Dullcote. It's a spray-on varnish (gotta use it outside), and it's definitely the most matte of all matte varnishes I've come across. Be sure not to use it when it's too humid outside, or it could cause some frosting on the model. Dullcote should be available at any hobby shop (and even arts & crafts stores like Michaels and Hobby Lobby).

[@thewarbosstsiaves3742]

you are 1 of the best painters ever!!!!!!!!

[@linkinhearts666]

Fantastic tutorial. I like that you were okay with making mistakes - and showing them! The humour made this video that much better :) Fantastic again! ~Ghost

[@SchnauzerFaceMinis]

Thanks! It's music from "Explosions in the Sky." Tracks used are The Long Spring; Be Comfortable, Creature; and Human Qualities. Other tracks I've used in previous videos include Last Known Surroundings, Your Hand in Mine, and First Breath After Coma. Enjoy!

[@vixenmother57]

Are you going to come back and do more painting vids?

[@SchnauzerFaceMinis]

Thanks! I would think that would probably work. I know you can't use water, because it will cause the metallic flakes to rust, so I imagine you wouldn't run into any problems with denatured alcohol.

[@dahSweep]

Yeah, I totally agree on the rounded part. He looks more like a goldfish than a.. largemouthed bass. But anyway, I use Vallejos polyurethane primers, but I haven't really cleaned them with soapy water as you said in the video. Maybe that's the reason? Often I just assemple the models and start painting, then sealing it with gloss varnish, then matte. I'll try out the cleaning though!

[@dahSweep]

Allright then :-) Thanks alot for the tips! I haven't decided on which Castiwaiter to get, but if I get the metal one I'll definetly try out prepping it :-)

[@sergeantindie8072]

ENOUGH ALREADY! I shouldn't have to sit through SO MUCH painting to get to the sick ass puns.

[@Raatcharch]

Thanks! I tried that and it worked. I still had some clogging issues, but I at 30-40 psi, I was able to varnish my figures with Liquitex Gloss Varnish.

[@SchnauzerFaceMinis]

Sweet!! Are you gonna do some tutorials or unboxings? Looking forward to it!

[@TheVexinator]

First time I've watched one of your videos, this is great! I like your sense of humor, and you obviously have a great talent at painting. I've subbed and will work through your back catalog. Was a special treat to see you using that H&S Infinity airbrush - I bought one last week. =)

[@TheVexinator]

Ok, some of the jokes are pretty bad. Still subscribed though =P

[@Rednikkums]

Thanks for the reply I have recently gotta into airbrushing my models ( about 3 months ago) so I was just curious as to what you use I'll defiantly look these up! Great Job on the model btw!

[@SchnauzerFaceMinis]

Nah I just file down the mold lines, wash it with soapy water, and then prime it. I've seen a few guys smooth out the whole model with a dremel and steel wool, or something like that, but I haven't ventured into that technique just yet. I've had good luck without any sanding so I've been happy so far!

[@CatalinCiubotaru]

Awesome videos! Can you make one about how to use pigments and how do you use them, etc etc. Your technique is different than what I've seen so far and I love the results.

[@AlfonsoTheTraitor]

I never thought to use chalks as a shade before , Thanks !

[@kinsleyfranklin9818]

I have been trying to thin ulthan grey, which is a very light shade of grey. i forgot to mention this in my first comment but i am putting the paint in a spray gun for the grey because it acts like white and doesn't go on the model very well. i have already tried it with distilled water but the paint pools in some areas and doesn't seem to "stick" to the model very well.

[@SchnauzerFaceMinis]

Awesome! Sounds like a good plan

[@bestialbear666]

I love the Post Rock you used with the video, definitely going to subscribe. . . oh the paint is good too :p

[@SchnauzerFaceMinis]

I did! Unfortunately there's nothing in the Minitiaire line that approximates P3 Sanguine Base. I suppose Pestilence Flesh and Swamp Ground could be used to shade the white. Dusty Ground looks good on the Minitaire chart, but it looks nothing like that in real life. And I guess snow white or skull white could work for the white, though neither of those are really all that white. So you might need VMA white as a final white highlight on these menoth models. Looking forward to the videos!

[@MRt3RR]

Must say it agaign an amazing paintjob keep the good work man =)

[@SchnauzerFaceMinis]

Thanks! It is the metal version. I don't really care for the plastic one -- it looks too rounded, or something. This one has nicer lines, in my opinion. The plastic resculpt also looks like he's working out with shake weights, too. I haven't had too much trouble with paint chipping on metal models. What kind of primer do you use? I like the Vallejo polyurethane primer -- it creates a really nice bond even with metal!

[@TheBlackSpiral]

Came for the painting, stayed for the impressive bass impression.

[@maxbrandt6]

Really impressive work!

[@matao0661]

Great video, and a Out standing job on the mini! Your video now makes me feel like I'm doing a sub-par job on my Menoth army! :(

[@JoeTheDIY]

These videos are my new religion for painting. Thank you so much! Someone tell me if there's an assembly line method for painting units this way or is it just an extension of this video across several models? I cannot get my speed up.

[@genaschtes]

i blend my colors also from darkest to brightest. i think it is way more smoother because the airbrush does the work. and i have to say, just because seeing this vids makes me wanna play menoth.

[@Cille0n]

Ok, thanks for answering! Keep up the good work

[@mikekobularcik3983]

You sir are a damn good painter, I have never tried using air brush. I might have to, I got the shakes when I paint ha.

[@SchnauzerFaceMinis]

Mike K Thanks for the kind words! Airbrushes are great, and it might make some of the painting -- at least basecoats/shades/highlights -- a lot easier if it's hard to keep your hands steady. Definitely makes the painting more enjoyable in my opinion!

[@CT2507]

awesome video! im very pleased u didnt airbrush the heck out of this mini! great choice of colors.

[@TheRubbberDucky]

This is amazing, honestly I do not yet own any miniatures. I was looking in starting Warmachine and I found this. Im inspired. Is there any way you could do a video for beginners showing your painting station setup and suggest good high end brushes and items you use along with their budget equivalent? Im looking to start a small Khador army and Id like to paint them well but have no clue where to start. I love the effect of that base by the way! It looks so much more dominating. Thanks!

[@evgeniyagrigoreva]

Hello. Could you please tell me how you thinned P3 paints for airbrushing and which needle size and pressure do you use? Thanks in advance

[@SchnauzerFaceMinis]

I actually don't have any of the P3 washes, so I couldn't help you there. I'd just suggest trying out different ratios until you find something that works for your needs. you may also find that certain jobs require different ratios than other jobs. So there may not necessarily be one ratio that fits every need. Just experiment and have fun! :)

[@MGralka]

Great stuff! Thanks!

[@SchnauzerFaceMinis]

Dude ... yes. YES!

[@robcooper4835]

Your work is fantastic, I really need to know, when your are masking your models it looks like blue tac and I assume low tac masking tape but do you always varnish or purity seal your model before masking? At the moment I'm using Gw paints thinned with thinner and the paint rubs off when touched until I seal it, when I watched your hair spray weathering vid ( an epic vid btw) I wondered if you sealed it after the rust coat and after each armour colour or do vallajio paints just work better? Thanks for your time and thanks for sharing your talent!

[@SchnauzerFaceMinis]

Hi IdodnotFartedIswear! Which wash are you having trouble with?

[@ZeMnouS]

i really hope u do the new menoth colossal that comes out near the end of this month cuz even tho the rules on it are not the greatest thing it still can be a huge center peice on a menoth army or collection

[@parrott15]

Could you also you P3 Bloodstone to base the copper areas?

[@handsomebigt]

i'm loving the vids

[@puppykicker6000]

That sounded like a fish to me! Nice job, for all your vids, keep it up and get more posts up. I'de like to see some Cryx on here if you get the chance! :)

[@Nibletz26]

Very very Nice paint job ! Make à tuto on thin paint etc...

[@DeppyDolls]

You just made me wanna buy a Castigator:p !!!

[@jay21art]

Nice set up! Looking to get also a good step to start doing some video my self. Any recommendations for a nice camra/lens for a camra noob? haha

[@werwelshies123]

great vid as always man you have inspired me to start warmachine and menoth 1 question what airbrush would you recommend for beginners i would like one but theres so much to chose from i was wondering which one would be est. thanks

[@mrrocksmithy]

How do you mix your P3 paints? I have just been using paints specific for airbrushes, but it would be handy to be able to use P3 paints for uniformity :)

[@ThundrCh1ckn]

I really enjoy your vids. This one is very relevent to me because I decided to do a white scheme for my khador army. I hope to see a lot more warmahordes in the future. I had a question on what camera you use. I have my own channel and am looking to get a better camera for painting vids and battle reports. Another question is what needle do you use in you HnS airbrush. I banged the needle on my ebay special and need to do a replacement for fine detail.

[@TheMightyCroog]

First, awesome work! I'm really enjoying your videos, you're very talented. Now for my question, do you think one could use denatured (as opposed to isopropyl) alcohol to thin/clean-up the VLG series of paint? Just curious.

[@altsien]

Well now I'm going to have to get that model a castigate my khador jacks. ;)

[@kinsleyfranklin9818]

I'm re-posting this question again but i would like to know if i could thin the new games workshop paints with terps/thinners. Please answer because i want to get my white done before the holidays are over

[@KonamiCode]

I noticed you've switched over to using gloss varnish from the matte varnish you used in the Karchev video. Is there any reason why, or is it just working better with the oil washes you're doing? Would using a matte varnish between acrylic layers work well until you're finally ready to commit to the gloss and do the washes? What would be the difference between using varnishes and mediums?

[@IdidnotFartedIswear]

Hi, Im having problems with the P3 armor and flesh wash. Apparently they have to be liquified before use, but Idont know the water to wash ratio. Thanks

[@javierponce3097]

hey, I recently purchased a badger patriot 105 a step up from my cheap chinese brush. Just wondering what type of AB are you using? I plan on getting a 2nd brush since I've heard the patriot is just considered and entry level (but great made in the USA) AB.

[@theminiaturepaintingtutor7885]

Great vid :) what airbrush you on ir?

[@oninodeibbido]

You probably have been asked this a number of times, but what ratio and materials do you use to thin standard paints for airbrushing. I have yet to accomplish the goal, it always seems to gum up my airbrush.

[@MichaelRyanCovert]

Curious as to what u might have used for ur basing materials... specifically the green flowrs. But these look like they have white buds on the tips? Do u recall the brand??

[@HaWior]

Thats right I like the old GW washes. They are the best but mine stink like vomit. Hope Vallejo will improve the recipe. Thanks for sharing videos!

[@theminiaturepaintingtutor7885]

Brill :) I never thought you'd answer. Is any old compressor good for this?

[@Raatcharch]

Hey there Mr. Schnauzer! I love your channel. I've got a question about airbrushing varnishes that I haven't been able to find an answer to. Do you thin your varnishes at all? I've been trying to run Liquitex Gloss and Satin varnishes through my airbrush, and both cause clogs pretty quickly. Can you offer any advice on this matter? Thanks!

[@kensaiix]

before applying primer, do you smooth out the pewter mini's surface with something? sandpaper or so?

[@firefox12702]

what air brush are you using? was looking into getting one and not quite sure what to get.

[@wncsnake]

I love airbrushing, and I really prefer the P3 paints, but I tried to put the P3 through my airbrush and it clogged all to hell. What do you use to thin your P3 paints for airbrushing?

[@HaWior]

Nice paint job again! Do you use Vallejo Washes? I have recognized that when you put on to much, it will dry white.

[@felixdreads1623]

awesome vid what psi are you using with your airbrush?

[@Astronaughty03]

I sub'd. I haven't bought any models yet but I think the game is a lot of fun and challenging. I came to your vids for inspiration but I am finding them to be quite intimidating D: Any advice for someone who has never painted anything excluding his shirt with ketchup?

[@jay21art]

Great video! what do you use for your setup? (ie.camera)

[@dluff]

Do you have a write up for the order of the paints you used?

[@kinsleyfranklin9818]

I'm in a bit of a pickle here, I've just gone out and bought a fancy spray gun to paint my models with, but when i spray the paint on, it starts to pool on the model. I'm using ulthan grey from the new GW paint range and i wanted to know if i could thin the paint using terps/thinners whatever you want to call it. if someone could help me out that would be great!