Old Paint Runs. My Favourite Tool And Method For Removal

[@ts3063]

Oh my. It’s like you are videoing the paint job in our home. The people we bought it from had no eye for detail.

[@rahrepo638]

Soo I knew about wet sanding but this game changer as soon as I seen this I went and got one the difference is insane thank you so much I just came back next day after spraying and I had some runs and this complete took it off thank you you saved me from digging in to the bare wood

[@PaintingandDecorating]

@@rahrepo638 you're welcome thanks

[@mahoneyseanpatrick]

Another outstanding video- I honestly can’t thank you enough for these. Your videos are like the oracle I consult before starting any project.

[@PaintingandDecorating]

Thank you.

[@ccruz979]

So glad I found your video. I have to do that to a paint job I tried doing on my own to my metal stairs! 👍🏼

[@PaintingandDecorating]

Thank you, thanks for watching.

[@ninmindy]

OMG I’ve been using just sand paper..I never thought to use a scraper..and I have one! Thank you!

[@PaintingandDecorating]

Thanks, your welcome.

[@Hirokiji]

yeah but! What he is not bloody explaining is that, the blade must be new and super sharp, and when you scrape, you keep the blade at an angle (like he is doing on the video) and use a very light hand. If you don't, the paint will just peel off and you will have to spack fill... But a fresh stanley blade gently cuts them off, followed by orbital sanding with 320 or 400 grit...

[@emilschneider9974]

We need to see what the instrument looks like please! :)

[@johnmcmorrow6022]

Try a wet sand with a flat pad after you have removed the runs, leaves absolutely no trace of the runs after. Works much better than a dry sand with paper.

[@AnonYmous-qw1yk]

What grit?

[@battlemasterszone1750]

@@AnonYmous-qw1yk medium or fine grit.

[@saudilass]

WOW that's brilliant 😀 That's going to be a real game changer in my old Victorian lady renovation, thank you.

[@PaintingandDecorating]

Thanks, your welcome.

[@rebeccad8568]

Such a chill video, for some reason its very satisfying and relaxing

[@PaintingandDecorating]

Thanks 👍

[@ColdWarVet607]

Liked the idea of overhead scrapping rather than using razor underneath. Only suggestion might be to try wet sanding, which I found is better on new paint to keep it from sticking in your paper. Nice Job Friend!

[@lavonbanks5361]

What is the name of this tool

[@noelreilly8860]

Never without my yellow Stanley window scraper . Does a multitude of tasks. £2.50 My most important tool. Just replace the blade when worn.I am a professional decorator for 30 years. Have all the tools of the trade but my favourite buddy is my window scraper.

[@adriansandry2783]

The tungsten scraper is also my go-to tool for dealing runs, paint build up on edges of doors etc. But it's an idea I picked up from one of your videos way back. My other technique for runs is to wet sand, because it is fast, dust free, cuts quickly, and results in a lovely smooth finish.

[@JoeProDecor]

That, or an orbital sander that will key/sand the whole door in the time it takes to remove the runs with the carbide scraper

[@JoeProDecor]

@Matthew Philip 120 grit abranet on either a mirka deros , or festool rts 400 , goes through old paint runs in no time at all Rather than using a carbide scraper, then having to sand the whole surface also, the sanding with a suitable sander does both jobs 👍 a carbide scraper does have its uses, but there are more efficient methods now for this type of job.

[@vinniedeluca2188]

I know right haha

[@dphotos007]

I like the scraping idea. Seems like that door has seen a lot of layers of paint over the years and it might be best to scrape the whole door and sand or even strip the paint off. Prime and repaint and use all new unpainted hinges. I never like seeing painted hinges. They look and work better not painted. New hinges are very cheap to buy at Home Depot but you have to match up your old hinges with the new ones. Measure the hinge and take a cell phone photo before going to the store. Some have round corners and some have square corners. If fact I changed out all my home door hinges with the brushed nickel ones. Looks great. I like to paint my trim in semi gloss vs gloss. It hides the mistakes and brush marks better and I always use a top quality brush like the top of the line from Purdy. It might cost $20 for a 2.5” or 3” brush but so worth it. The brush will last you years as long as you clean the brush with soap and water after every job.

[@paulyoung5073]

Thanks for everything..... best vids ever

[@PaintingandDecorating]

Thank you.

[@kjpontes]

What tool is that

[@dominicoconnell8491]

Scrape off runs when they are dry, sand the runs then repaint whole area or just where runs where

[@StephiePpn]

What tool is that?

[@AC-fu1lx]

How would you approach drips on the rounded parts (both rounded inward and outward) of more detailed molding? Have a old house circa 1900 I’m working on that has similar trim to what you have there around the door frame 😊

[@PaintingandDecorating]

You can use shaped wood sanding block, or just sand. Never easy when preparing for painting.

[@ianpotts4935]

make and model would be helpfull. please

[@katemoore8640]

Wow thanks this is exactly what I need. What is the tool called please?

[@MsBuggywuggy]

That’s what I was wondering! It’s not a very helpful video if you don’t know what it is or where to get one. I’m over here googling paint drip remover 😂

[@vinniedeluca2188]

This has to be an ASMR type video because any decent painter would know to just nick off the end of the run with a 5 in 1 and then fold a piece of 100 grit sandpaper and sand it down, then lastly buff it with some 220 grit and it’s perfect, half the time and looks even better. Also your focusing on runs on a door that is a complete mess, yes it’s good to remove the runs but in order to make that door look nice you’d have to hit the entire door with an orbital sander and then hand sand all the insides of the style, then caulk any cracks, spot prime any bare areas, followed by 2 solid coats of finish paint, block sanding and vacuuming between coats.

[@sarah3092]

What is that tool that you are using called I need one of those

[@nickilechein6667]

It's a window scraper

[@gaffer1976]

Love it!

[@chrisdaviesguitar]

what exactly is that tool called lol

[@SteS]

Been using a card scraper but this looks like another good method.

[@petertiffney4413]

Linbide scraper perfect tool get a diamond file and you can resharpen the blades

[@PaintingandDecorating]

Nice one thanks.

[@orbitalforest]

Nice tip .

[@artnwityr]

ASMR. This video had an ASMR affect on me. Ha ha....plus I also learned how to fix the sloppy painting mistake that I just made after painting the drywall in my garage. Thank You

[@stephenhamilton4699]

Is there a name for this tool mate?

[@PaintingandDecorating]

Wood scraper.. thanks

[@TomTomTomTom538]

Scarston scraper

[@Anna-lc2io]

What is the tool called?

[@justme80]

linbide scraper.. I just found it on Amazon

[@savedbygodsgrace1622]

How about putting a name on your favorite tool. You remembered to add music though.

[@jonjones1170]

Such a handy tool another use for it found top man 👍

[@PaintingandDecorating]

Cheers mate.

[@gigiis526]

I have those all over the house I bought! Dang amateurs . The house I sold was perfect because I pay attention to details so stupid mistakes like this dont happen.

[@dave1secondago]

there a great tool I picked 2 up at the bootsale , quid each , the new blades for em are xpensive though , think there about 30 quid for 4

[@PaintingandDecorating]

Yes great tool and like you say expensive. But you can get some off on trade cards.

[@orbitalforest]

You can get 10 for less than that price.

[@vinniedeluca2188]

Assuming there is 20+ doors in the house front and back would equal 40, using this method would take a year to complete the trim and doors alone, i guess this would be ok if it was for one side of one door but anything more then that and your losing a ton of money!

[@kelvinleming5794]

Must be on day rate

[@johnnymucholoveo604]

😇💪🏽😇💯

[@PaintingandDecorating]

Thank you.

[@TapelessDrywallFinishing]

👍👍👍👍👍

[@bevh4408]

Ugghhhh…noone on YT is showing how to fix this issue on a WALL. SHEETROCK.

[@mikeburke1993]

Pick better music already. Wow. Good video minus the music.

[@PaintingandDecorating]

Okay right now😁 got to agree not my best pick.. hopefully I've got better at picking the music..

[@lisastaub3368]

Sorry, but I was wondering the same thing. Guess I need a diaper change.

[@MrSmid888]

Or you could burn that door and fit a new one 🤪👍🏻

[@_P0tat07_]

Just knock the whole house down and rebuild it 😬

[@vinniedeluca2188]

Completely pointless when the rest of the trim looks horrible

[@nixygill7007]

Bit of a pointless video showing a tool - and then you don't tell us what the tool is called? Or where to buy or any internet link???????

[@PaintingandDecorating]

Everyone likes a puzzle, anyway it's called a wood scraper. And you can get them from nearly every D.I.Y. place... and why put a link to just one seller.

[@artnwityr]

Some people just like to be spoon-fed. Can I change your diaper also?