My Grand Marquis is getting one later this year. A gen 2 and 6060 though. Gen 3 is too pricey for me.
@hpkntnw3 жыл бұрын
03 cobra was a 4 valve 4.6 that’s why they were special and made so much power with basic mods.
@JordanSVT3 жыл бұрын
@@hpkntnw I'd rather have the stock Terminator engine and trans over a Coyote.
@Str8Ripper17763 жыл бұрын
@@JordanSVT the blocks hold about the same amount of power. I can't say anything bad about a 4v
@ryanmartindell89362 жыл бұрын
Judging from the OEM GT rear bumber, lack of chin spoiler, and GT side skirts - looks like the car may have originally been a 99-04 GT. Not sure why anyone would take off the cobra skirts and rear bumper and replace them with GT hardware but that's just my guess.
@PalmBeachDyno2 жыл бұрын
You're probably right!
@thatmoodykid18932 жыл бұрын
Legit the first thing I noticed, regardless this is still a bad build!
@44GTmustang Жыл бұрын
I think he put the GT bumper on to not put a hole in the Terminator bumper for the chute. It’s got the painted mirrors which is usually a sign of a Terminator
@r.g.5.0.h.o.51 Жыл бұрын
Still even with mirrors the skirts are not cobra an no reason to change them
@TeViiNz3 жыл бұрын
not sure its an true 03-04 considering it has different side skirts and rear bumper. unless he changed them for the gt stuff for some reason
@169abr3 жыл бұрын
Sadly I think I see more fake Cobras than real Cobras nowadays.
@TeViiNz3 жыл бұрын
@@169abr I guess I'm lucky to still own a real one
@169abr3 жыл бұрын
@@TeViiNz yessir, they’re very hard to find as actual Cobras, mostly up-badged GT’s and V6’s
@tomkjr13 жыл бұрын
@@TeViiNz Me too, I have mine as well. I'm glad this car was not a real cobra. Not many left around, we need to keep them intact! Breaks my heart to see Terminators swapped or parted out.
@ShizawnSanders3 жыл бұрын
I think the car looks great but if its not a real Cobra leave the badges off. Nothing wrong with Cobra body parts but leave the badges off.
@Boostedm3nace3 жыл бұрын
This car is listed extremely reasonably as well. I saw the add earlier in the week. It’s def going to sell after this video.
@travishinton47553 жыл бұрын
My dream is to put that set up in my 99 lightning
@Shiftheads3 жыл бұрын
Look up the zl1500. It's the chevy version of your dreams. Same ten speed
@jackmehoff99092 жыл бұрын
Why didn’t you have LUND tune this?
@PalmBeachDyno2 жыл бұрын
🤣🤣🤣
@CELLYYBO2 жыл бұрын
Sheesh. Still ran a 9.8? I need a gen 3 10r80 in my foxbody ASAP!
@paulhudgins51203 жыл бұрын
Man this thing is a Rocket, if the trans shifting problems get worked out, OMG it might break mach speed.
@nobodyimportant693 жыл бұрын
Yeah definitely. An 8 second car for sure if he gets the trans problem solved.🐍🚀
@davidholt71263 жыл бұрын
That’s not a real cobra. Side skirts are completely wrong and so is the rear bumper. Looks like he just swapped parts from a cobra.
@syedhamza20602 жыл бұрын
Car not running properly? Was that tranny at the end of the pull not dialed in. 1000hp still in high 9s. Not impressed.
@Jakeutube223 жыл бұрын
Damnit, now thats what I call a coyote swap.
@michealortiz33502 ай бұрын
Ehhhh. 4.6 terminator engine is better.
@anthonywilson52383 жыл бұрын
Texas My Man bring it to Ennis First 3.8 1/4 in history
@jeffledoux5439 Жыл бұрын
Ken do you know whatever happened to this car?
@wizza23153 жыл бұрын
That's a dream car right there! Beautiful car Rob!
@FAZAH_OFFICIAL2 жыл бұрын
How much will this build cost..definitely need this?
@AbundancePlus3 жыл бұрын
!That intro!
@petrolhead88513 жыл бұрын
That’s a killer combination! I was almost considering doing this swap to my 96 cobra but I’m going to end up building the factory 4v 4.6 that came in the cobra
@Cl8tonn3 жыл бұрын
What are you going to do to the 4v
@petrolhead88513 жыл бұрын
@@Cl8tonn I will be doing a big bore n/a build that can rev anywhere from 7800-8500rpm and hoping to hit as close to 500whp as possible,but right now I’m just trying to do a lot of research first before buying parts,but I am 100% dedicated to this build,I will not be changing plans for a different route to get the horsepower I am aiming for
@Cl8tonn3 жыл бұрын
@@petrolhead8851 I've got a 97 Cobra. I like your idea there. I love the way it drives and handles stock. I'm alot more na inclined than boost myself. You'll build mph at a crazy rate making HP to that high in the shift point
@petrolhead88513 жыл бұрын
@@Cl8tonn thank you. These motors can make horsepower in n/a form but they do cost an arm and a leg if you want big n/a power! For a fully built,ported and polished head is around 3500$ and if you want the best parts you can get, the cost can be as high as $6k. Just to sleeve and do a big bore teksid bottom end can be around 3k..but to be honest it’s worth it because you’ll have a reliable naturally aspirated high horsepower 4v motor that will last you forever compared to a boosted set up! I already bought a Mach 1 upper and lower intake,and some 01 cobra heads. What’s done to your 97 cobra? And you’re right! They do drive really good in stock form,they glide through the gears so smooth
@trentdaddydolla6472 жыл бұрын
I was about to say don't waste your time like my friend did but he was even worse with an sohc 4.6. My Yukon Denali put buses on him and he even had comp cams and ported heads, but your setup will be bad ass if you have an 8k rpm screamer.
@eddiearchuleta6155 ай бұрын
03 cobra wtf why coyote swap a 4v?
@johncapulong30363 жыл бұрын
Hi How much what are you asking for the car
@Smasher-Devourer10 ай бұрын
That transmission is not happy.
@AnointedOne7773 ай бұрын
This is amazing, also seen fox body’s with gen 3 coyo and 10speed trans. CRAZYYYYY
@geraldscott43022 жыл бұрын
I want to see someone put a CARBURETED 2V pushrod engine in a '94-'04 Mustang.
@waden4043 жыл бұрын
Fords Oxford White...best color EVER. 9.3 with terrible transmission issues? Wow
@avinashuppaluppal57462 жыл бұрын
is this car on stock chain guides/opg? looking to make similar power same setup.
@madmod Жыл бұрын
Are you Ken!?
@scottsigmon9263 жыл бұрын
Good ol 10R80 issues!!!! If it had a TH400 or a glide he wouldn’t have that problem at all!!!
@JordanSVT3 жыл бұрын
I think he should definitely go with a sequential in this.
@BamaStreetRacingSociety2563 жыл бұрын
Dope 🔥🔥🔥 Awesome video and great content overall! Gained a new subscriber here I’m looking forward to seeing more! Thanks for sharing
@PalmBeachDyno3 жыл бұрын
Appreciate it!!
@Smokey5ohh Жыл бұрын
@@PalmBeachDynowe’re those 17s or 18s in the front
@mikenorton85883 жыл бұрын
Where can I pick it up ?
@hitmandoe31062 жыл бұрын
Is he running a oem 4r70 shifter with the 10r80 or stock 10r shifter?
@nicko97252 жыл бұрын
Do they have an aftermarket controller for the 10r80 now? I know last I looked into it (been a while) there wasnt really a viable option to transfer the stock control unit over without implementing a lot of other features.
@909cobra3 жыл бұрын
i so need this in my 97. do you have a around about price. i know new is 17k
@populatedcity7 ай бұрын
the dyno graph was beautiful
@buddyywilsonn3 жыл бұрын
I have a 03 mach 1 with the 99/01 cobra bumper on the front
@Itsondawg2 жыл бұрын
any info on how and whats used to get speedometer to work with this set up ???
@chrisvela54623 жыл бұрын
Is that an F150 shifter? I'm missing a 10 speed, but definitely would like to swap the shift knob
@davidhernandez63973 жыл бұрын
That’s a pretty smooth dyno graph
@thechocolatestarfish904 Жыл бұрын
What kind of wheels are those?
@ITSSTOCK093 жыл бұрын
things screamin
@anthonywilson52383 жыл бұрын
Wow In the perfect set up it at 8 sec car all day
@LocoBlitz813 жыл бұрын
How much is Rob asking for the 03?
@kingcobra86252 жыл бұрын
More like a 01
@fbaeza3 жыл бұрын
what cluster are you using?
@jayc95093 жыл бұрын
Thats not an 03 cobrs
@svt_chris91823 жыл бұрын
I WAS LEGIT THINKING THIS SHIT TODAY LIME I WONDER HOW MUCH IT WOULD COST TO PUT A GEN 3 and supercharge it into a cobra ...LIKE WTF
@nicko97253 жыл бұрын
That engine , trans, blower setup is worth more than the cobra, and they still pull pretty good money to be nearly 20 years old.
@JordanSVT3 жыл бұрын
@@nicko9725 I think it's just a GT so just the engine alone is worth much more than actual car is.
@cobrajeff963 жыл бұрын
Damn, that thing's got some anti-squat.
@oblivious2jz9732 жыл бұрын
5.2 voodoo with a 10spd would be even crazier 🔥
@PalmBeachDyno2 жыл бұрын
🤔
@trentdaddydolla6472 жыл бұрын
The engine doesn't last. Why would he waste money like that? Lol. He made the correct choice.
@syedhamza20602 жыл бұрын
@@PalmBeachDyno something so Bizarre even the tuners get confused.
@Sc300autogm3 жыл бұрын
What rear gear does the cobra have?
@joeJoe-pb3su2 жыл бұрын
Great cobra
@high-rise85053 жыл бұрын
Just amazing! 🇺🇸
@2.65tvs23 жыл бұрын
Great numbers.
@christophercantu66953 жыл бұрын
5:33
@johnboticki91543 жыл бұрын
Looks like a gt with some cobra parts. Tried to see the rear of the car, doesn't look like an irs. Could have done a solid axle swap I guess.
@chadbearden83453 жыл бұрын
Drool worthy
@ThaSilentOne4202 жыл бұрын
Why not just buy a GT and do that to it . Lowered the value to a collector later . I mean its a great swap not knocking it . Just wouldnt do that to something thats collectable is all
@gilbertrtf21953 жыл бұрын
Nice car but if it is a true cobra, I would of left the original design 03/04 cobra and just convert to an auto and Whipple 3.0 Gen 5 with all supporting mods. Would be just as fast or maybe faster. Still though is white car had great numbers.