NEW P&S DREAM MAKER! Is it better than Bead Maker?

[@PanTheOrganizer]

🔥 For more quality detailing products visit: bit.ly/3BiPe3o ⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ 🇺🇸 For people in USA: On Amazon: P&S Dream Maker: amzn.to/3oWuMNl P&S Bead Maker: amzn.to/3lwAxiB Auto Fanatic Mega Gloss Tire dressing: amzn.to/3F2iMhF For applying on dry paint, I recommend this towel: amzn.to/3DJwCoU For use as a drying aid, I recommend this drying towel: amzn.to/3Avarkw At Car Supplies Warehouse: P&S Dream Maker: bit.ly/3ly9yDC P&S Bead Maker: bit.ly/3v2RiVU P&S Products on AMAZON USA: amzn.to/3PKU0Zc Vyper Chair (at Obsessed Garage): bit.ly/3tnHztD Vyper Chair (at Car Supplies Warehouse): bit.ly/3B43xVF 🇨🇦 For people in Canada: P&S Dream Maker: bit.ly/3oRbf0M P&S Bead Maker: bit.ly/3ABVWLv For applying on dry paint, I recommend this towel: amzn.to/3mSov2J For use as a drying aid, I recommend this drying towel: amzn.to/3v9y7K3 Vyper chair: goaff.pro/otzyke 🇬🇧 For people in the UK: P&S Dream Maker: bit.ly/3AECVKJ P&S Bead Maker: bit.ly/3wPgNMv

[@gregsmith8031]

Have you ever tested cerakote paint sealer and what is your opinion on this product

[@RF_Andy]

My favorite combo is using beadmaker as a drying aid with dream maker on top. Love this stuff.

[@mikeywinn1764]

How long do u wait to apply dream maker after bead maker? And does it help attract less dust than just beadmaker?

[@MyGuyKirby]

Dream Maker is a nice product for a final touch. I have used up my first bottle and was surprised how well it did on 50-year are old single stage paint. Owner was impressed so he bought a bottle

[@mills271]

Both products are absolutely amazing. I typically will put layer both products. I put the Bead Maker on first and then the Dream Maker on top. Bead Maker is definitely going to last longer and give you more protection, while the Dream Maker is going to give you a lot more pop.

[@ForceFreddy]

How long do you take after applying bead maker to apply dream maker?

[@marybetheby5184]

@@ForceFreddy I do the same combo and I let bead maker cure for at least 5 hours before putting dream maker on.Ideally you should allow bead maker to cure overnight.

[@ForceFreddy]

@@marybetheby5184 Thank you! I will try this combo tomorrow !

[@marybetheby5184]

@@ForceFreddy Great!Also,be sure to shake them both really good and often during the process.

[@jeepinspence]

Has anyone tried mixing the two in one bottle and using it that way?

[@stephenmoxley3004]

Thanks for pointing out the differences between these products. I use both of them and like the results. Keep up the great work.

[@PanTheOrganizer]

Thanks Stephen!

[@benhook1850]

Would like to see a side by side comparisons. Coated and uncoated to see if it’s noticeable to the naked eye in terms of gloss

[@PanTheOrganizer]

The camera rarely does glossy products justice, but this for sure beads an uncoated paint for sure.

[@Meeeks]

@@PanTheOrganizer Can this product be used over a spray sealant? Eg. I was planning to wash an unprotected car then apply Turtle Wax Hybrid Solutions Ceramic Spray coating and then Dream Maker on top of the sealant. Should I do it in reverse order (Dream Maker then Ceramic Spray on top)? Would either method just be a waste?

[@nomad509]

Gun metal paint plus Dream Maker equals bliss! Recently I was finally able to complete the annual Mother's Day detail on her dark grey Dodge Durango. I topped it with Bead Maker after a one step paint sealant and then followed up the next day with Dream Maker. The mirror gloss was insane!

[@biggun7]

Why wouldn’t you use a gloss meter to test effectiveness? A before and after would have been a great test. Otherwise not sure you see the value of adding a product like this over any other topper you’ve recommended, but as always…thank you!

[@pdrey100]

You'll have to wait for Brian from Apex detailing to review it. He ALWAYS uses a gloss meter. Have been waiting for Pan to use one in his reviews.

[@jjjjjjjjjjjhjjjjjhjj]

Check out esoteric

[@erik9108]

@@pdrey100 Same. Nothing wrong with using the same tool as a competing channel.

[@mrclean5953]

Pan has explained many times before why a gloss meter isn't used.

[@RichardsWorld]

Oddly, the very shiniest the paint can get is after polishing it, and nothing on it. Adding something on top of the shiny paint actually loses gloss. Try adding wax or other products on top of your bathroom mirror and see what makes it more clear.

[@stackenali7059]

The review we've all been waiting for!

[@markie1014]

I normally just use a quick detailer after drying but find my car is always covered in dust the next day, no matter what product I use. I used this 3 days ago and only just seeing dust on the car! Amazing stuff! oh, the shine on a metallic blue car is outstanding!

[@PanTheOrganizer]

Thanks for sharing your experience. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 145 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@waynefromnewfoundland8740]

I’m a big fan of Bead Maker and I use it over Jescar’s PowerLock sealant. Looks spectacular. Love the introduction to a new product and I will certainly be adding a bottle of Dream Maker to my arsenal. Thanks for the info Pan.

[@waynefromnewfoundland8740]

@@Brandon-no3vc Not really sure what you are talking about and “masking” but I use the Bead Maker as a topper after a maintenance wash. It brings back the shine and slickness to the paint and it makes it easier to wash.

[@waynefromnewfoundland8740]

@@Brandon-no3vc I have been doing it that for 2 years. Great results. I’ll stick to what works for me. Thanks for your advice and good luck.

[@waynefromnewfoundland8740]

@@Brandon-no3vc Jescar’s Ultra Lock Plus is a CERAMIC infused polymer sealant. The combo works for me. Not sure why you’re so hung up on this. But ok, you made your point. I won’t do it anymore.

[@LeadMunitions]

@@waynefromnewfoundland8740 🤪

[@PanTheOrganizer]

Thanks 👍

[@tonyschornak8052]

When you get a chance, could you do a gloss comparison with what you would consider the top four gloss enhancers?

[@kevindillinger3699]

Here is a link. I remember watching this. Was a good video. kzbin.info/www/bejne/e4O3gq1jg7mtZ7s

[@Andresthebigkat]

Yearly awards my man top3 tho

[@benkneisley3001]

Tony, you MUST be new here……

[@lindaschornak331]

@@benkneisley3001 I am not that new but have mostly been following the last 10 months. I refer to my detailing as Pan's Depot.

[@rickinwast]

@@brad-zf9oh I’m new here as well. So, what evidence do you base your statement on?

[@404notfound.....]

Nice product to have around to give your vehicle that extra pop! Congrats on the sweet Viper chair pan. 👍🇨🇦

[@meanf1502]

Pan you can put beadmakwr on light rub an let beadmaker set for like 10mins an spray dream maker over it an fub them both off works awsome

[@drnh4444]

There are not many companies out there that actually mix and produce there own chemicals. Most buy them in bulk, market it ans that's that so it's nice to see a product company with an actual chemist

[@opmike343]

In my mind (in theory), I like the idea of beadmaker not being a 6 month product in that I use it as a drying aid after every wash. So, durability isn't as much of a concern as whether or not a product starts to "build up" and cause issues from that perspective.

[@TheNuclearBolton]

I personably just like having a high quality ceramic/graphene coat on the car and applying dream maker after every rinseless wash.

[@chrisrefaei]

Perfect timing of this upload. From what I gathered Dream Maker has no protection properties just gloss where's Bead Maker is a spray Sealant.

[@tredfxman]

Might as well use Sonax Carnauba Spray wax, have that slight protection + carnauba shine & be done with it if your asking me! 👍

[@rays.86]

Any difference between Xtreme Solutions “Topper”? The same purpose?

[@PanTheOrganizer]

Topper lasts a bit longer, and they are both almost equal in gloss.

[@dichicodetails4994]

Picked up two new P&S products to try out. Please keep have fun as you keep testing new stuff...and please keep sharing.

[@PanTheOrganizer]

;)

[@ddautodetailing]

Great review and explanation of both products! I could really see the gloss on the vehicle in the background.

[@PanTheOrganizer]

Thanks!

[@timrobinson3972]

I always use griots garage best to show detailer gives my paint nice pop does this give more gloss then griots Thanks

[@PanTheOrganizer]

That’s a good quick detailer too.

[@haroldflugleman4364]

I've been using beadmakaker for the past couple years and like it. Used Dreammaker this weekend and it does appear more glossy

[@jorgeivanvelezaguilar1531]

Pan, if I use the Bead Maker as a drying aid, the buildup should be way less than when applying it on the dry surface right?

[@PanTheOrganizer]

Correct as you are slightly diluting the product.

[@TheBillclark2]

How does this compare to Xtreme Solutions Topper? How is it different? Thanks as always!

[@kimnewling5728]

Great question

[@stevenmott6668]

Same question I Have I think Topper is one of the best products out there for gloss and slickness. It’s also very easy to apply. For an outside vehicle I get between 7-10 days of slickness and gloss.

[@kimnewling5728]

@@stevenmott6668 me to.

[@PanTheOrganizer]

Topper will last longer, and both are very close in terms of gloss.

[@danfarrington7727]

Thanks, Pan. Picked up a bottle for use before any events this year. Looking forward to trying it for a car show next month.

[@PanTheOrganizer]

Thanks!

[@DavidRomero-qy1is]

Hi. How are you. What did you use on the tires to make it so shiny. Thanks

[@PanTheOrganizer]

This is an old video so I don't remember which tire dressing it was unfortunately.

[@joeyredmon]

Looks like a great product Pan. Yet another product that I will have to add to my collection.

[@MadelnMachines]

Is it good to use dreammaker as a clay lube or quick detail spray as well as a drying aid?

[@zibaa1234]

Thank you sooooooo much!😊. Just wondering if I can wax my car, right after applying P & S bead maker as a dry aid?

[@PanTheOrganizer]

Yes.

[@saucyua9696]

What tire shine did you use in the video?

[@PanTheOrganizer]

A glossy (unreleased to market) version of this: amzn.to/3xdwjRq

[@randyrockwell6136]

Did a rinseless wash on my truck, not really dirty, just needed a little love! Applied Dream Maker when I was done and it really looked great ….. made the GMC Cayenne Red really pop! Thanks for another great video Pan!,

[@PanTheOrganizer]

Thanks Randy!

[@fauuzisaid]

If we have a ceramic coated car we have to apply this as a dry aid ?

[@PanTheOrganizer]

Yes, you would use it as a drying aid. See how I use it as a drying aid on my own ceramic coated Porsche in this video: kzbin.info/www/bejne/gXakl5aVgbqCaqc

[@MeanBee392]

Loved the review Pan! Lots of good info on both products and when it’s best to use each one. I have used Dream Maker and it really makes the paint pop with lots of gloss. One weird thing that I had happen was on a gloss meter it dropped the gloss numbers but visually it was stunning. Love that viper chair also!

[@PanTheOrganizer]

Thanks man!

[@seansean8008]

Apex detail said that some products cause inaccurate readings in the gloss meter, something about how they reflect the light back into the meter.

[@obssed]

Can I use the Dream Maker on top of ceramic coating?

[@PanTheOrganizer]

Yes

[@sallo45]

Hi. Can i usa dream maker as a drying aid on a ceramic coated car (gyeon pure) after maintaining washes to quicken the application?

[@PanTheOrganizer]

Dream Maker is not to be used as a drying aid. It's made to be applied no dry paint. But you could mix it with Bead Maker in a 1:10 ratio and then use that as a drying aid. See my video on the special mix here: kzbin.info/www/bejne/qqjYhZdoi7Ofrtksi=IaN_bqYNo7DuSNcQ Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@dalwindersingh2322]

Thank you Pan. Just they type of product I wanted but had no idea existed.

[@marklittleton1309]

Thorough review, Pan! Thank you!

[@PanTheOrganizer]

You are so welcome!

[@isaacstacoify]

I'm more interested in what tire dressing you used?? Those tires look amazing!

[@PanTheOrganizer]

The glossy version (not yet released) of this product: amzn.to/3xdwjRq

[@darrinlogan]

What is a good sealer or wax to use in the winter months?

[@PanTheOrganizer]

This has NO protection in it, as I mentioned in the video. This is just a gloss enhancer that will last a few days to about a week.

[@KonstaNykanen]

Really nice presentation Pan! Great job!

[@Lexus_ES350]

Pan, Another great video. I’ve been watching your videos on Bead Maker, to include your first introduction to Bead Maker at the Rag Company. I finally broke down tonight and ordered it. I just want to make sure that I can use this as a drying aid after each wash. I have CanCoat Evo on our vehicles. I want to do the initial application of Bead Maker on dry panels and then as a drying aid after that. I just want to make sure I’m not overusing it as a drying aid after the first build up application. Thanks in advance and keep up the great work.

[@PanTheOrganizer]

Yes you can use it the way you described. Be very light on application if you’re using it as a drying aid after each wash and you will be fine.

[@Lexus_ES350]

@@PanTheOrganizer thanks so much Pan. Have a great day.

[@Lexus_ES350]

@@PanTheOrganizer I forgot to ask you. Have you used Technicians Choice Ceramic Spray? I want a product that will not continually build on my CanCoat Evo. I’m curious on your thoughts of Technicians Choice. From the videos and research I’m doing…it may be superior to BM and a gallon is compatible in price. I need something that mates well with my Evo but will not continually build upon it to take away from or compromise the Evo. I’m so torn on a good silica spray or product for my sacrificial layer on the Evo. Any thoughts or advice is greatly appreciated. Thx again as always.

[@richardseem7948]

Came out awesome.awesome video and product review good friend.

[@PanTheOrganizer]

Thank you Richard!

[@SA-he5ej]

For dusty areas like the one i live in i recommend Carpro Cquartz uk 3.0 topped with Carpro Reload. I recently tried Turtle wax graphene flex wax. Amazing gloss and slickness (ok with dusting) but it's pain to apply. It streaks like crazy. As soon as it will be available in my country i will try P&S Dream Maker. 👍

[@nikosk2950]

Can I apply this if there is light dust on the car?

[@PanTheOrganizer]

It's not really meant to be used as a quick detailer to pick up dust. It's supposed to be used on clean paint.

[@Carlos-x5f4v]

How do you clean the grills on the cars trucks suv

[@PanTheOrganizer]

Wash the car as per usual, and then use a soft detailing brush to get into the intricate areas. A brush like this: amzn.to/49TdsNH You can see my use it on grills in videos like this: kzbin.info/www/bejne/gma2gmOQfq92oJIsi=5WinATjKmLWCOTWW Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 980,000 subscribers and we have over 132 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@CarlosFernandez-gh2vk]

Just placed the order for the Dream Maker. Looking forward to trying it out. Thanks for the demo.

[@johnmayo4889]

I know BM is a sealant is it possible to put wax or ceramic on top then seal again.. help I sealed after compound and polish

[@PanTheOrganizer]

You could. I would put more durable protection first, and then Beam Maker on top for the gloss and slickness. BM only lasts 3 to 4 weeks, so you use it more often, like a drying aid after your washes.

[@johnmayo4889]

@@PanTheOrganizer Thanks Pan, you are a blessing watch your vids constantly...just got back in to the deatailing game which has changed a ton since I started in 09

[@Eii22]

niiice one Pan great great video! 👍

[@PanTheOrganizer]

Thanks!

[@justineloresco8584]

would you rather use this as a topper for seal n shine or just stick with the ice wax spray?

[@PanTheOrganizer]

Spray Wax will last longer but Dream Maker has more gloss.

[@harcourtsmall6125]

Thanks for a great vid as usual Pan. Keep up the good work.

[@PanTheOrganizer]

Thanks, will do!

[@blondie1484]

the dream maker is it like new version of p&s paint gloss showrom spray n shine?

[@PanTheOrganizer]

Yes and no. Paint Gloss has UV protection in it.

[@victorperezjr.8122]

Hi Pan, quick question can I wash a detailing applicator sponge or do I have to throw it away

[@PanTheOrganizer]

It depends what you used it with. Can you he more specific? What products are you applying with it?

[@victorperezjr.8122]

@@PanTheOrganizer it would be for interior products for dashboard,side doors panels.

[@PanTheOrganizer]

In that case, you can simply wash it and reuse it. The only applicators you throw away are those used to apply ceramic coatings from glass bottles.

[@Soy_Alejadrito]

Hi pan ! Can i use the dream maker on a ceramic coating ? Will not lose the hidrophobic properties? Thanks

[@PanTheOrganizer]

Yes you can but it can potentially change the hydrophobics a bit but that applies to any topper you would put on top of an existing ceramic coating.

[@Tdub33]

You reckon it's better than Tac Systems equivalent?

[@PanTheOrganizer]

It's glossier than Shinee Wax but Shinee Wax lasts longer and has a bit of protection, Dream Maker has zero protection.

[@Nick-1992-SRB]

I can’t wait for this product to be available on Amazon because I’m from the other side of the world Australia.

[@christopherkovacic6873]

I just ordered some from the detailing shed a few hours ago in aus can't wait lol

[@scottchristie9586]

The Viper Chair is expensive, yes. Buy once, cry once. It is hands down the BEST garage chair made. Your grandkids will be using it 50 years from now!

[@PanTheOrganizer]

I agree. Built like a tank, high grade materials, top notch finish.

[@simplymatt_]

Could this be used on a car with a ceramic coating? Or better off to just stick with something like wetcoat by Gyeon?

[@PanTheOrganizer]

This can absolutely be used on a coated vehicle. On wax, paint sealant, or ceramic coating. No problem. You can even combine both products for the best of both worlds: gloss, slickness and anti-static properties. See my video here: kzbin.info/www/bejne/qqjYhZdoi7Ofrtksi=kgkEBYAO958wDJiR Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@AppGradeOfficial]

Hi Pan, I have a new SUV with ceramic coating. I clean it using the Rinsless wash method with ONR. Do you recommend using both bead maker and dream maker for the final touch to get more slickness and gloss? Or I can get it using only dream maker?

[@PanTheOrganizer]

That's up to you to decide. You can now combine Bead Maker and Dream Maker in a secret DIY mix for even better results. See my video here: kzbin.info/www/bejne/qqjYhZdoi7Ofrtk

[@scottcurtis1830]

Hi Pan I will be using Avalon King on my Ford F150 truck and am looking at using Bristol trim coat/Cockpit Car Re newer on the plastic trim so my question is, can I use that product or another and then also use the ceramic coating over it. And if i use the ceramic coating on the trim, does it appear glossy? specifically speaking of the trim between the driver and passenger windows.

[@PanTheOrganizer]

Typically the short answer is no. Trim coatings already contain protection (I don't know the Bristol one though). But a trim restorer or ceramic coating won't necessarily make the trim appear glossy, but it will make them look newer and richer (better looking). A good trim coating/restorer is this: amzn.to/3DFc6q7 You won't need to apply protection on top of that after using that kit.

[@ItzF8aL]

Hey Pan! Would you recommend this or seal and shine

[@PanTheOrganizer]

Two different types of products. Dream Maker only lasts about a week and adds zero protection. It’s made for ultimate gloss. Seal N Shine is a sealant that adds protection and can last up to six months.

[@nurhidayat7660]

Hi Pan ! I love all your videos ! Can I ask a quick question ? How long do I need to wait to apply P&S Paint Gloss/Dreammaker after applying Beadmaker?

[@PanTheOrganizer]

3-4 hrs

[@jazzman9469]

Hello Pan, great video! I just put Adam's graphene coating on my car a few weeks ago (still sitting in garage) and now I want a topper. Is BM or DM a good topper or is there better for black cars? Thank you!

[@PanTheOrganizer]

For the Adam's Graphene Ceramic Coating, their own Graphene Detail Spray is pretty good. Here's a link: amzn.to/3wXfN8u Bead Maker is also a good choice. Just keep in mind those two only last a few weeks. So regular application is key. Dream Maker is awesome for gloss, but it adds no protection. It will only last one week or until your next wash. You would still need to add a proper protection topper once a month. If you want a longer lasting topper that will give gloss and slickness like Bead Maker, but that can last 2 to 3 months, try this one: amzn.to/3wRqzhH

[@KathieMoore13]

Love it! Now I too must have that, as one can never have enough "gloss"!!! LOL. What a GREAT Vyper Chair.......fit for a King!!!! Congrats Pan, well deserved!!!!

[@PanTheOrganizer]

Thanks Kathie! I love how my chair was customized to match my garage cabinets!

[@FilthUD]

That’s a fancy ass mechanic’s chair

[@kimnewling5728]

Yeah. E. Solutions Topper vs Dream Maker. Love the chair

[@Andresthebigkat]

Vs Phoenix E.o.d. Titan 🙌🏼

[@allank930]

Just purchased my first bottle, amazing gloss 👌

[@PanTheOrganizer]

It's so good!

[@flytyingguy1]

“ Pan The Man” your killing me! I keep spend money I’m not going have any left to get up to the garage! Hope you got 2 of those chairs one for me!😂😂😂

[@PanTheOrganizer]

Heheh it's an awesome chair I agree. What colours would you take yours in?

[@flytyingguy1]

@@PanTheOrganizer whatever you buy for me!😂😂😂

[@mann8254]

Totally loved it, thanks Pan it was amazing can't wait to also test on my car the minute it hit our shores🙌🔥

[@brutusguygaming8687]

Hi pan! Can i apply this on top of tw graphene flex wax? Will it mask/impede the properties of the graphene wax?

[@PanTheOrganizer]

Any topper you apply will slightly alter the hydrophobics of what ever is beneath it. Don’t overthink it.

[@kevinvanderschaaf3482]

Would the "creature" on the short nap side work will or not?

[@delphinebez3045]

Absolutely.... that's what I use with beadmaker.

[@PanTheOrganizer]

Yes it will

[@jtcber]

May I ask the product you use for tire dressing? Looks very wet and gloss.

[@PanTheOrganizer]

I use many different tire dressings as this is a detailing channel and I test things all the time. My favourite products are in my popular annual awards video here: kzbin.info/www/bejne/gpynY2WLfNqdo9k

[@Super1prettyboy]

Xtreme solutions topper or this new dream maker strictly for gloss Pan???

[@PanTheOrganizer]

Dream Maker

[@vkarabin]

Another great show!!

[@PanTheOrganizer]

Thanks!

[@ianburrell9116]

Another great informative video....thanks again pan!

[@PanTheOrganizer]

Thanks Ian!

[@kevinmcneil1998]

That gloss is amazing!

[@PanTheOrganizer]

It sure is! Thanks for watching Kevin!

[@Aaron-yn4bk]

I have been using Bead Maker for years. Is it OK to use it on top of a ceramic coating?

[@PanTheOrganizer]

Yes, you can use Bead Maker on top of any existing protection.

[@berniehf]

Nothing like a good “Pan“ (bread in spanish) for breakfast, cheers mate, keep the good videos coming

[@OrganicStuff1]

Like Panko?

[@berniehf]

Welll…..lol

[@PanTheOrganizer]

LOL thanks Bernie!

[@Mike_Spina]

That Viper chair is pretty gangster Pan!!!

[@PanTheOrganizer]

Totally Mike! My neighbours are jealous!

[@waynep4256]

Hi Pan ,is this OK to put on the top of turtle wax spray ceramic coating? yet another fantastic review. 👍 love the seat.

[@PanTheOrganizer]

Yes you can put both of these P&S products on top of any paint protection.

[@josephskiba6079]

I am new to detailing and going to do the ceramic coating for the 1st time. The question is: How often do I have to do the Iron removal once I am done with the ceramic coating? Is it required for every time the car is washed after ceramic coating?

[@PanTheOrganizer]

You would do the iron removal once every 4 months on average, or depending on how much brake dust contamination you see on your paint. It won't harm the coating. Assuming you are using a true coating from a glass bottle from a reputable coating brand.

[@josephskiba6079]

@@PanTheOrganizer Thanks for the quick reply. I am using all the products from your recommendations for 2021 and am going to order the following P&S Brake Buster Total Wheel Cleaner W8 Bug Remover Car Pro Reset Car Pro IronX Gyeon Clay Lube 3D ONE HYBRID for scratch removal CARPRO ERASER INTENSIVE POLISH Turtle Wax 53737 Hybrid Solutions Turtle Wax 50984 ICE Seal N Shine Griot's Garage 10978 3-in-1 Ceramic Wax Armor Shield Ceramic Coating Invisible Glass CARPRO CQuartz DLUX Plastic & Wheel Coating Chemical Guys TVD_107_16 V.R.P. Vinyl, Rubber and Plastic Gtechniq C4 Permanent Trim Restorer Lithium Inner Space CARPRO PERL - Plastic Engine Rubber Leather Dressing Colourlock New Leather Care Kit Angelwax Bliss Chemical Guys BUF_900 Foam Pad Conditioning Brush Foam Pads for compound

[@josephskiba6079]

@@PanTheOrganizer Can you also let me know the following: After the paint correction, do we have to do the wax polishing also before applying the ceramic coating? Also, I have to finish a Honda Odessey(2009) which has never been paint corrected before, and BMW(2019) which is almost new, what kind of pads should be ordered for the above 2 cars?

[@stephenmiller5572]

Thanks Pan I was over using bead maker. Once a week to twice a week.

[@PanTheOrganizer]

👍🏻

[@stephenmiller5572]

@@PanTheOrganizer actually once a week, then once every 2 to 3 weeks. Around the the length of 4 months (since I first found out about it from your channel). Do I have to do anything to get the access product off?

[@PanTheOrganizer]

No, it will come off on its own over time. Or you can use a stripping style shampoo to clean the paint and start fresh. Like this: amzn.to/34RbKR3

[@stephenmiller5572]

@@PanTheOrganizer thanks again!

[@susantompkins8810]

Very gorgeous! Perfection! That color is very close to my machine grey metallic that I have on my Mazda CX-30 Premium. I love it, will need to get some dream maker for sure!

[@duke6j]

Keep these videos coming. Great job!!

[@PanTheOrganizer]

Thank you!

[@aarontyrrell2931]

Love the stool! Wish they would send me one!!

[@PanTheOrganizer]

Thanks for watching Aaron. How did you discover my channel? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 870,000 subscribers and we have over 110 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@fernandoperezsolano917]

As these master, a question if the car has ceramic coating or a ceramic sealant type carpro hydro2 or meguiars hubrid the drying assistant which can recommend me whether to use the meguiars detailer, paint gloss p & s or dream maker p I'm confused even with that criterion when it comes to using it so as not to scratch my black car.

[@PanTheOrganizer]

I'm not sure I understand your question... First, what type of protection do you currently have on your paint? You should watch my popular tutorial on safe washing and drying methods so you don't scratch your paint. Here: kzbin.info/www/bejne/bXzSm2igZ6qma7c

[@fernandoperezsolano917]

@@PanTheOrganizer Thank you very much master for your prompt response, my car I have protected with ceramic liquid wax from meguiars, I reinforce it with quick detailer from ceramic from meguiars, for future projects to start in the world of detailing if a car has a ceramic protection I can use the pain gloss of p & s as a drying assistant? Here in my country the products of meguiars are expensive and those of p & s are more comfortable, by adding the pain gloss is a protection

[@archietambasen4150]

new subscriber and newly exploring car detailing here in the Philippines Pan. Just a quick question, can you combine the usage of both products sir?

[@PanTheOrganizer]

Hi Archie! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 940,000 subscribers and we have over 123 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. You can combine these two products if you have the appropriate dilution ratio. I explain how in this video: kzbin.info/www/bejne/qqjYhZdoi7Ofrtksi=UfVTdgIEdAKFY6-z

[@bobbydigital1747]

Do you recommend paint gloss or dream maker after a wash? My vehicle is already ceramic coated

[@PanTheOrganizer]

For a regular wash, I would use Dream Maker. Zero protection, but insane gloss. Lasts about a week or until your next regular wash. And then, once every other month, use a silica spray sealant for the actual coating maintenance.

[@bobbydigital1747]

@@PanTheOrganizer Thank you so much!

[@PanTheOrganizer]

You bet!

[@MichaelOnRockyTop]

Pan how do you think the gloss compares to their paint gloss spray? And is dream maker just as effective with anti-static properties?

[@PanTheOrganizer]

It’s very close but Dream Maker takes the edge for slickness. I don’t have dust issues where I live so I can’t say much on antistatic properties but my viewers say both are very good.

[@MichaelOnRockyTop]

@@PanTheOrganizer Wonderful. I'm going to order some now so I can start using CleanMaker. Thanks dude.

[@PanTheOrganizer]

👍🏻

[@philipilizarov4624]

Hey Pan, I saw your video about products that give the most gloss and I have been trying them all out 1 by 1. Which do you think gives a better look in terms of saturation and gloss. NV Nova Lustre or Dream Maker? Thank you and best of luck to you!

[@PanTheOrganizer]

Dream Maker has the highest gloss as it's strictly a gloss amplifier (it doesn't last long and doesn't add any protection).

[@philipilizarov4624]

@@PanTheOrganizer I will mix the dream maker with the bead maker and see how that works. 😃

[@PanTheOrganizer]

I made a video about mixing those here: kzbin.info/www/bejne/qqjYhZdoi7Ofrtksi=irPCLPmTp0ztuGN7

[@abdullah_fardm.9725]

Thanks PTO. I'm in California, and it is very dusty here so I won't use BM. 👍🏾💚

[@slow1485]

What tire dressing did you use on this Kia? I love the gloss appeal it has.

[@PanTheOrganizer]

The new glossy version of this: amzn.to/3xZQySJ

[@slow1485]

@@PanTheOrganizer Autofanatic Mega Gloss? What would you say is the glossiest tire shine available ?

[@PanTheOrganizer]

It's one of the glossiest that doesn't sling and leave an oily mess. There are "wetter" looking ones, but they are usually petroleum based and sling like crazy on the paint, and have an oily look. The Auto Fanatic Mega Gloss dressing is awesome.

[@seansean8008]

May I ask which is your favorite showroom glossy topper? Thank you for the review !

[@PanTheOrganizer]

I made a video about that here: kzbin.info/www/bejne/hIC3f5iaZZmrj6c

[@seansean8008]

@@PanTheOrganizer I watched the video, and to be clear, the best glossy look was by Obsessed Garage- if gloss was the only consideration?

[@neildaveyneos]

Great video thanks! Thanks for the UK link ! Can I use this on top of OG Drying Aid?

[@PanTheOrganizer]

Yes you can!

[@jaydenmorrison8666]

can you reveiw the shine armor products

[@PanTheOrganizer]

Not on my channel. They are not worth purchasing in my opinion.

[@Froztinc]

I have been looking for a drying aid that will NOT make my drying towels hydrophobic. Would this affect drying towels?

[@PanTheOrganizer]

The majority of drying aids eventually coat the microfibers and make them less absorbant over time, as they usually have some protection. Hence why it’s important to wash the towels immediately after use with a quality microfiber detergent like P&S Rags to Riches. Or use a drying aid with zero protection like a rinseless wash (ONR, McKee’s N914, etc).

[@markmccloskey119]

I ride a Harley, after a few hour trip, what is the best way to get the road dirt off/bugs off the front fairing without doing a full wash? I'm interested in trying P&S, but don't want to apply every time when I need to clean the road dirt and bugs off the front. Cleaning a motorcycle is time consuming with a full wash. Looking for a quick and easy method after a long day ride.

[@tredfxman]

Might as well use Sonax Carnauba Spray wax, have that slight protection + carnauba shine & be done with it in 1 step if your asking me! 👍

[@tonyperez7057]

Hi Pan what do you consider the glossiest gloss enhancer, by the way love your channel and all your knowledge and information thanks for the help

[@scottcrawford3745]

In Pan's 2021 Product Awards, he gave top place to Xtreme Solutions Topper. 2nd was Shinee wax by TAC Systems, and third was Bead Maker by P & S. (Video:kzbin.info/www/bejne/gpynY2WLfNqdo9k) He also did a Secret products for the most shine video, (kzbin.info/www/bejne/e4O3gq1jg7mtZ7s)

[@PanTheOrganizer]

That proves you follow my channel! Thank you Scott!

[@scottcrawford3745]

@@PanTheOrganizer My Vehicles and I thank you for sharing your skills, experience and knowledge with us all. Keep up the great content!

[@iftar3849]

I threw my bottle of dream maker out. Even on coated cars it DESTROYS any beading. I applied it and the self cleaning properties and beading of the coating disappeared for a minimal gloss increase. I promptly rinsed it out with tarX and tossed the bottle in the trash.

[@carlosparedes8214]

Que renovador de neumáticos usaste?

[@PanTheOrganizer]

amzn.to/3xbXYSE