BEST SHORT GUNS FOR PRESSURE WASHERS!

BEST SHORT GUNS FOR PRESSURE WASHERS! In this episode, I compare four popular short pressure washing spray guns, which all have built-in stainless steel hose swivels to prevent tangling and twisting under pressure. They also all have quick connect type stainless steel plugs and adapters for easy connections to accessories like extension wands and foam cannons.
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOr...
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
Active premium short pressure washer gun: amzn.to/3rwWaF1
MTM Hydro SGS28: amzn.to/44QnpbW
MTM extension wand: amzn.to/44uaCfG
MTM Hydro Acqualine SGS35: amzn.to/3PZJwIM
MTM Hydro Acqualine extension wand: amzn.to/3pTdBPD
OG Spec Mosmatic gun: bit.ly/46U8vmT
OG Spec Mosmatic wand: bit.ly/44s5bxz
🇨🇦 For people in Canada:
Active premium short pressure washer gun: bit.ly/3pR9JP4
MTM Hydro SGS28: bit.ly/46TYLsJ
MTM SGS28 gun and wand kit: bit.ly/3NVuEJ0
MTM Hydro Acqualine SGS35: bit.ly/44uxOdM
MTM Hydro Acqualine gun and wand kit: bit.ly/46QGc8Z
OG Spec Mosmatic gun: bit.ly/3JY4XqE
OG Spec Mosmatic wand: bit.ly/3x9Z6al
OG Spec Mosmatic nozzle assembly: bit.ly/43vGZZS
🇬🇧 For people in the UK:
MTM Hydro SGS35: bit.ly/3pSSmgU
Mosmatic gun: bit.ly/3rxhme2
Active gun: amzn.to/3JTf1zV
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicso...
Watch more of my videos:
✅ Best pressure washers at different price points: • The best pressure wash...
✅ Battle of the best foam cannons: • FOAM CANNON BATTLE !! ...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on KZbin, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganize...
🎥 List of equipment I use to produce my KZbin videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganize...
🎶 Intro music by Hurley Mower
/ hurleymower
#detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing

[@PanTheOrganizer]

⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ 🇺🇸 For people in USA: Active premium short pressure washer gun: amzn.to/3rwWaF1 MTM Hydro SGS28: amzn.to/44QnpbW MTM extension wand: amzn.to/44uaCfG MTM Hydro Acqualine SGS35: amzn.to/3PZJwIM MTM Hydro Acqualine extension wand: amzn.to/3pTdBPD OG Spec Mosmatic gun: bit.ly/46U8vmT OG Spec Mosmatic wand: bit.ly/44s5bxz 🇨🇦 For people in Canada: Active premium short pressure washer gun: bit.ly/3pR9JP4 MTM Hydro SGS28: bit.ly/46TYLsJ MTM SGS28 gun and wand kit: bit.ly/3NVuEJ0 MTM Hydro Acqualine SGS35: bit.ly/44uxOdM MTM Hydro Acqualine gun and wand kit: bit.ly/46QGc8Z OG Spec Mosmatic gun: bit.ly/3JY4XqE OG Spec Mosmatic wand: bit.ly/3x9Z6al OG Spec Mosmatic nozzle assembly: bit.ly/43vGZZS 🇬🇧 For people in the UK: MTM Hydro SGS35: bit.ly/3pSSmgU Mosmatic gun: bit.ly/3rxhme2 Active gun: amzn.to/3JTf1zV Watch more of my videos: ✅ Best pressure washers at different price points: kzbin.info/www/bejne/lYbafJJmi6l-ZtE ✅ Battle of the best foam cannons: kzbin.info/www/bejne/rXeYoXeGepypqJI

[@terriblet9810]

Went with the MTM SGS28 and the extension wand - thanks for the reviews!

[@thatmidlifevlogger4463]

What ate the options in Europe. Living in Netherlands

[@ObsessedGarage]

Great video Pan! Here is a little history on the back story of the short gun for pressure washing. Not a lot of people know this stuff. I don't get much credit for all of this, but I'm telling you this is how it happened. I wish I knew it would take off. I would have taken more risk than I did and protected my ideas. The first thing that not a lot of people know is that pressure washers imported into the US are not allowed to come with a short gun. There is a legal minimum length they must come with or can't be approved for sale in the US and many other countries. It's a safety and liability issue kind of like amber markers on US cars. It wasn't until about 2014/15 that the short gun started becoming a thing. Now there were some Suttner, MTM available in the Pro Pressure Washing world at places like KleenRite, but they weren't popular, especially with quick disconnect use. Most of us that were using a pressure washer got the garden hose out or filled up a bucket to clean wheels the old fashioned way. Using a 36" wand was not practical for the full cleaning process. At the time I had a Kranzle K1122TST, and I was trying to figure out how to put quick disconnects on everything so I could break it down and put it away. I also wanted to be able to switch and take the long part of the wand off and add a foam cannon. We didn't have all the fancy fittings we have now, so I was using all kinds of adapters and ugly brass versions from General Pump and MTM. They were hard to find. Next came the short gun. The first one that we were using was the MTM M407. It is basically an ugly version of the non-swiveling SG28. It was a game changer, but I still liked to rinse the car with a wand. I bought all the wands that I could find on the market. They were all terrible. I forget exactly what I was ordering, but I set-up a wholesale account with a pro pressure washing place. I was fed up with wands, but I threw a wand in my cart that I saw on the site to try out. It was from a company I had never heard of called Mosmatic. Now, the stars must have been in alignment that day because there are about 200 different combinations of how you could configure a Mosmatic wand. I accidentally ordered it exactly correct. I can't explain to you how much of a miracle that was. Even after I figured out the right combo, people were ordering the wrong one for years after trying to get a better price. That wand, and the Mosmatic/Suttner stuff probably wouldn't be here offering this stuff today had I not fumbled into that wand. Well the wand had a problem, "How the heck do we get a QD fitting on it?" It had a nozzle protector that blocked access to the female NPT head. I put some soap on the protector, pulled down past the head nut, put the 1/4" QD on, then pulled the protector back over to give us a clean look. Now...we could pop the tip off and switch between long wand set-up for rinsing and short gun only for foam cannon and wheel cleaning. We were still using a hodge-podge of brass and stainless fittings. That is also when 14mm vs. 15mm M22 fittings started to become a problem for people buying cheap Ryobis and SunJoes that were trying to wash their cars with them. Now that I had a Gun in the MTM M407 and 20" Mosmatic wand, I wanted to figure out how to get my hose to stop get all jumbled. I bought a Mosmatic swivel that only came in G or BSPP/BSPT threads. I ended up with 6 fittings to get the 2 1/2" long swivel on the end of the hose. We had about 7" of bulk hanging off the end of the hose just to get a darn swivel on there. But...my hose wasn't kinking up any longer. Next was when I gave up trying to send people links where to buy all this stuff. I decided I needed to put all of this stuff together into a package. At that same time, I called Mosmatic about something they had in their catalog. There was no photo, just a model and description. It said it had an integrated swivel. That sounded amazing, but Jaime from Mosmatic thought I was nuts. He is now a good friend. "You don't want a swivel built in, and you shouldn't be using QDs." I fought him and convinced him to bring one in. I think it cost me about $400 for shipping, duties, and taxes to import from Switzerland. He said they never had one here because they would never recommend them. Mosmatic had to make one. They didn't stock it anywhere. If the swivel fails, the gun fails was their take. Well, that gun was the best darn thing I had ever seen, and it took about 4" of bulk off the end of the hose. I then started selling the $1575 pressure washer package that I didn't think anyone would buy. Boy was I wrong. That first month I sold $40,000 worth, then $50,000, then $60,000... For the first 2 years, I was only selling pre-ordered systems and to this day am more often out of stock than in stock. Well...I must have done a good job marketing because now all the retailers wanted the gun that no one had ever heard of or had seen. That made them even harder for me to get. I called MTM complaining about how Mosmatic was screwing me up and booked a call with Rob and Mike at Veloci MTM. Together on that call we designed the SGS28 in the exact form it now sits today. That was pretty early on for me in business, so I couldn't commit to exclusivity. Plus...I still liked the Mosmatic more. It's just a better gun. It takes the best design from Suttner and the best swivel from Mosmatic and combines them. The ball bearing trigger is also unique and the best on the planet. So the SGS came in, and they sold it everywhere. Several years later we started to see the Chinese knock-off junk show up on Amazon. Duschin and other I.P. theft likes started showing up, and of course the US consumer doesn't care about any of that. They will simply buy whatever is the cheapest. I had also spent a lot of time with MTM to get us all the proper stainless fittings we now have today. It was around this time that I decided to take a risk and approach my friend Jaime at Mosmatic about making the gun I really wanted. It took us about 2 years of back and forth, prototyping, testing, etc. to get that gun Pan is using. This time I committed to exclusivity. I had to place 12 month blanket orders for $2,000,000 worth of fittings (that we completely redesigned made in Switzerland), new wand design, and gun. If I didn't sell them, I still had to pay and take them all. It was a huge risk. Shortly after that, MTM approached me about the SGS35 Aqualine. The Aqualine was a food services gun in the larger Italian catalog that no one had ever ordered. To me the Aqualine makes no sense. The trigger is not good, the gun is unnecessarily bulky, and the SGS28 was way better for much less money. They didn't listen to me and brought it over. Of course all the retailers that don't know jack about any of this ate it up and sold them to you. It's the worst MTM product and makes no sense to me. There is a whole lot more to the story, but that is some of it. I don't apologize for the cost of the OG Spec Mosmatic gun, wand, and fittings. We designed it to a standard of what it needs to be, not to a price point. Mosmatic makes it, has a reasonable margin to me, then I get a 50% margin from you. There are similar margins on the MTM and much higher margins on all the Chinese junk. It's just that the Mosmatic costs a boatload more to make. I also had a lot of say in the new Active gun, but I don't like how it came out. They decided to launch it anyways. I think that gun would needs to be about $35 to be intriguing. The SGS28 is a much better gun. Anyway, this is some of the behind the scenes of how the short gun has come to market. I have many more ideas in the future for foam cannons, fittings, and pressure washers. All it will take is risk, time, and a whole lot of money. I can only hope that I can make it happen. Matt

[@ryanhansen3350]

I love you Matt!! Keep doing what you’re doing! Everyone copies you for a reason. I am glad I discovered you fairly early and am excited for every project you start!

[@ObsessedGarage]

@@gradycarrick2420 Everyone needs to remember that as quality rises, so does cost and retail price. It's much like all great products. The incremental returns begin to diminish as the quality rises, but there are many of us out there that appreciate functional excellence.

[@JuanOnjuan-kp7tp]

You don’t get a lot of credit for what? People were using these pw guns way before you ever started making videos. I really hope you were joking but I somehow think you were actually being serious.

[@JuanOnjuan-kp7tp]

It seems as though you somehow left out a smaller business called detailers domain who sold kranzle to us detailers long before you decided to do the same. I even want to say that you once mentioned that they were the ones you purchased your original kranzle through. Btw, MTM also sold their qd couplers and plugs to detailers around this same time too. I learned about the use of qd’s from a small channel like yours (qwashers) a couple of years before you started your channel.

[@whiteywho7151]

you must be new here@@JuanOnjuan-kp7tp

[@ethanblan435]

I use a mtm hydro sg35. Got very lucky because I literally found it on the ground on the side of the road. Little beat up but not terrible condition. I love having the light trigger press

[@dailyDIYdude]

Same gun I use. Love it

[@apostolisapostolos2254]

Its mine 😂

[@ethanblan435]

@@apostolisapostolos2254 not anymore 😂

[@jayrl8833]

Bro thats no luck but sign hahaahah

[@TheeoooW]

Honestly love the active over my previous mtm. Mostly because of the bottom quick connect being a lot closer to your hand giving, so the hose has less leverage against yourself. Definitely helps my wrist to not fatigue as easily. May seem like a small thing but has been good for me.

[@PanTheOrganizer]

Thanks for sharing!

[@bluepanda75]

Active put out a video showing how to remove the ball bearings and spring to remove the click feature on the trigger if people don't like it so it will feel more smooth like the mtm ones.

[@d.hoffman7031]

I recently bought & used the mckillans gun w a swivel along with the wide mouthed foam cannon. Great stuff and around $100 for both!

[@ricardogomez01]

I heard when the mackillans gun is connected with pressure it can't swivel. The Mosmatic, SGS28 and Active can still swivel under pressure. Can you confirm?

[@d.hoffman7031]

It does for me.

[@ryang8299]

Hi Pan, just finished a whole DIY ceramic coating. Your videos gave me a lot of confidence to do it myself and I think it turned out great!

[@PanTheOrganizer]

Great to hear! What coating did you apply?

[@ryang8299]

@@PanTheOrganizer ended up with the Avalon king, 10/10 experience I’d say.

[@PanTheOrganizer]

Yeah it's still one of the easiest consumer grade coatings to apply. Doesn't last super long like some 5+ years $$$ coatings, but that's acceptable given its lower price and focus on user experience.

[@neilwalker5041]

I really like this comparison test and they all look like a durable everyday product. I have the MTM black handle SGS28 and after a few years the build quality is still brand new. The only flaw is when using the handle for the first time of the day the quick connect to the nozzle takes a few attempts. Once the pressure washer is running changing tips is easy. For me the biggest change I made to my pressure washer system was upgrading the hose. I have broken several hoses at the connection end of the pressure washer. A video over Wips would be something no one ever talks about. Thank you for all your hard work Pan!

[@PanTheOrganizer]

Thanks for sharing Neil!

[@Jewishkowboy]

Those prices are crazy. I got a $35 one on Amazon 2 years ago and it works perfect

[@rogermendez7266]

Seen them for $99 overpriced +

[@clintsaines9274]

Was it the ridge washer one.

[@davidbram]

The MTM SGS35 can easily be found for $95 and is hands down the best one available

[@ObsessedGarage]

The SGS25 is much better for $20 less than that. The Aqualine should not exist.

[@PuresDen]

@@ObsessedGarage nah the 35 is way nicer I've used both. But the og mosmatic is the best for sure

[@gianlucabassgnani]

I don't think a better swivel and a more satisfying click are worth 120 more over the sgs35 🤷🏼‍♂️ btw love your channel

[@thenebularity]

I was legit just looking at buying a Short Gun last week but I didn't know what to get or what to look for as I want to upgrade my Karcher K2 Pressure Washer to something higher quality. You're a true gem Pan for providing us very useful information on gadgets and teaching us all kinds of car detailing topics.

[@PanTheOrganizer]

Thanks!! By the way, did you check out my video on pressure washer recommendations at different price points? Here: kzbin.info/www/bejne/lYbafJJmi6l-ZtE

[@thenebularity]

@@PanTheOrganizer I did! But I'm from Australia and there isn't much variety unless I get it shipped over-sea's. I'm leaning more towards the Karcher K7 or K1700 Pressure Washer.

[@PanTheOrganizer]

Both excellent choices. Perhaps go for the K1700 or K1900 as those have standard 1/4" quick connects so you can add accessories more easily (foam cannons, different hoses, etc). The K2, K3, K4, K5 and K7 have proprietary bayonet style connectors, so you have to use adapters and that's not as practical. I had a Karcher K5 for ten years, and although it was a great inexpensive unit, that proprietary connector drove me crazy haha. So I switched to the top pressure washer, the Kranzle 1122TST.

[@thenebularity]

@@PanTheOrganizer Yeah the connecters and the hose are so nasty on the Karcher, always having to fight and fix them haha. I'm planning to purchase a Uberflex Hose, MJJC Foam Cannon Pro V2, SGS28 Gun with quick connects to go with the Pressure Washer, I haven't decided on a Pressure Washer yet, It's just so difficult to find variety equipment in car detailing here it seems. I did say I was looking at the "K1700" but that requires shipping from the US, so I was left with "Bigboi Washr FLO" or the "Karcher K4 or 7 Compact", I would happily purchase a Kranzle but they range from $2-3k. I did further research and I was highly interested in the "Active 2.0" because I basically just want the unit itself because I'm adding upgrades to it and It's easy to travel with. But again It's from the US and It uses different power plugs than us which is Types A and B while we use Type I. I'm no electrical expert if It's safe to mix the two Types with like a Universal Power Plug Adapter or something. I need to do some more research :D

[@chargerstorm9441]

I have used the OG Spec for about nine months used once or twice weekly. It has been a great experience no complaints.

[@PanTheOrganizer]

Thanks for sharing your experience.

[@404notfound.....]

Excellent video pan !! I personally like the bent wands. I agree, mtm hydro sg35 is hard to beat!! 👍🏼🇨🇦

[@PanTheOrganizer]

Thanks 👍

[@Ammoniummetavanadate]

Brass is actually more corrosion resistant for most marine or water related service than 304 stainless so the brass body isn't a negative.

[@dtna]

I have had very good luck overall with MTM pressure washer accessories. Excellent customer service, too. I would spend extra for their stainless steel coupler fittings.

[@PanTheOrganizer]

Thanks for sharing

[@ernestomagana24]

Your videos are always so helpful. Concise information and great sound quality. Thank you Pan!

[@PanTheOrganizer]

Thank you Ernesto! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@aldaley3537]

The Mosmatic short gun is unbelievable with the Active 2.0.

[@Mugenkidd82]

My Essential Washer gun is money.. swivel end and stainless steel internals. I HIGHLY recommend.

[@andrewburt4838]

On a budget so went sgs28 and wand in July. Planning to uograde my pressure washer next season, so I wanted to get my hose and fittings sorted out. Wish I upgraded years ago.

[@taylor315]

I’ve got the Active washer and it’s awesome. Obsessed Garage has an upgrade kit with hoses and swivels too

[@PanTheOrganizer]

You mean this kit? bit.ly/3Oyo09M

[@taylor315]

@@PanTheOrganizer That’s the one! They’ve got everything, piece by piece or all together.

[@Dias-v]

The most quality gun I found on the market is the mtm sgs28 yum edition from uk is mosmatic like spec and the internals are also nickel not brass

[@unreviewed]

I'd like to see THE BOSS™ Pressure Washer Gun

[@chfin7251]

I have Karcher K5 with 2k PSI and 1.4 GPM. I want to upgrade the wand to MTM ACQUALINE SGS35, with maybe including the lance too. I want to buy the MTM ACQUALINE NOZZLE WITH GUARD 40 DEGREES as I need it for the car. It is giving me option like this "2.0, 2.5, 3.0, 3.5, 4.0, 5.0". I know smaller is more pressure and less water. I want more water and ok with less pressure. Should I just go with 5.0? Would 5.0 work well with 1.4 GPM pressure washer?

[@waxmanvids5015]

Love ny SGS28! The hose and gun GREATLY ENHANCE the user experience!!!

[@PanTheOrganizer]

Thanks for sharing your experience.

[@jabbagna4237]

Great video … Thank u

[@PanTheOrganizer]

Glad you enjoyed it! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 145 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@cranfktubner7677]

I have the Active 2.0 and their water gun. Pressure washer is awesome. I was hesitating on the gun but after using it for some time i’m convinced 👍The quick connects can be upraded to get your satisfying feeling 😅

[@PanTheOrganizer]

What gun would you get?

[@cranfktubner7677]

@@PanTheOrganizer i got the Active 👍and i really like it

[@PanTheOrganizer]

Cool!

[@alexandersantiago531]

I bought the active gun and I am very satisfied with my purchase and I totally 😊recommend it and its price is very competitive. It feels high quality and light in hand

[@PanTheOrganizer]

Thanks for sharing your experience Alex. What pressure washer are you using?

[@alexandersantiago531]

@@PanTheOrganizer Active 2.0 greetings from Puerto Rico Pan

[@PanTheOrganizer]

Greetings from Montreal, Canada!

[@JamesDBuzzard]

Great video. I went with the SGS35 got it for $80

[@Ecdetails]

Pan like you I just went with the OG spec its just the best you get what you pay for. Appreciate the video

[@Ecdetails]

@@ArnageInFL that bougie life man send me the link , I honestly had no idea 🤷

[@PanTheOrganizer]

Thanks!! Yup you got the best of the best.

[@bobbybarnes1652]

Appreciate all your efforts, @PanTheOrganizer. Just ordered the MTM Hydro Premium MTM Kit 1 Pro with the SGS28, PF22.2, stainless bent lance, 50' Kobrajet grey hose, some extra SS fittings, and nozzles. Couldn't pass up their current 20% off sale on everything!

[@shumardi1]

I just ordered the same as well as the Active 2.0.

[@bobbybarnes1652]

@@shumardi1 I think you will be pleased with the setup. It's not a million dollar setup, but it's far better than 98% of what the clowns are using out there. Congrats.

[@shumardi1]

@@bobbybarnes1652 Thanks, and when I say I just ordered it, I mean this morning. Should all arrive next week. The Active 2.0 pressure washer. MTM Kit, Rag Company mitts, Detail Guards Dirt Lock for the bucket, Gorilla Ladders platform, mitt on a stick, and wash for the foam cannon. About a thousand dollar order. Big step up from going to the car wash but I thought if I was going to get some stuff to wash my pickup at home I was going to do it right. I had a ceramic coating put on a few weeks ago. I plan on putting 300,000 miles on this pickup. I will eventually get some products for the interior.

[@MikeroWav3]

Nice! Cars with keav did a similar video and I'm glad to see you put in your 2 cents as well. Patiently waiting in the best detailing products of this year!

[@PanTheOrganizer]

Thanks! The 2023 awards are coming very soon so stay tuned. This year’s edition is the best ever, by a long shot!

[@adam-up3iu]

I just spend £417 on og spec sprayer gun and lance now it’s waiting time for me until I get my hands on it

[@PanTheOrganizer]

Best gun and lance I ever tested

[@shumardi1]

That MTM bent wand looks like it might be good for getting to the undercarriage until I finally get a dedicated tool for that.

[@aalfonso4706]

I use an MTM SGS28 with the lance attachment when needed , and my foam cannon is the PF22.2 . Just got my active 2.0 can’t wait to give it a go this weekend.

[@PanTheOrganizer]

Sweet! Enjoy.

[@d.4063]

Why isn't anyone talking about the angle of the handle and the nozzle of the SGS28 / stubbies? My wrists are continuously under strain and start to hurt after using it for 10 minutes. I use the equipment professionally. I've heard multiple people comment on this, but all the reviewers seem like they are copying each other. I have switched back to a Kärcher Easy Force and no pain anymore.

[@stevenjordan6188]

I'm using my new pressure washer, foam cannon, and lots of products you have recommended to wash my vehicle tomorrow. I hope everything works out well, I can't wait.

[@PanTheOrganizer]

Have fun!! Detailing is so soothing to me.

[@adamrusch7112]

If you are starting out would you go active or the MTM sgs35. I've heard the Active is fairly short more for small hands?

[@cthiele08]

I have been using the MV925 from Luxury Microfiber and I love it. Price wasn’t bad either, $79.

[@CarbonAutoSpa]

Hi Pan. Another awesome video. I’m a mobile detailer and on my second year, for pressure washer gun I started with mckillans gun bc was cheaper than all other brands and still last long working no issues only the trigger the top one was not stainless steel so o swapped it. I would love to see it one of your videos I think the owner does good job making durable product with low budgets. Thank you again for everything and just you know like me maybe ton of detailers comes to this business with videos of you guys ✌🏼

[@PanTheOrganizer]

Thanks for the kind words! How did you discover my channel by the way?

[@CarbonAutoSpa]

@@PanTheOrganizer be honest no words enough to describe. I’m personally car lover and sick about cars. But 3 years ago started watch your channel here I’m at a mobile detailer on my way to up 🙏🏼✌🏼. Detailed explanations the key for your videos and helped me a lot choose the chemical I need, choose tools I need with the budget tho. I really appreciate man. Keep going

[@PanTheOrganizer]

Thanks for the feedback! I wish you much success with your business!

[@a14koolcor]

I’m starting a petition to bring back the PPPPAAAAAAANNNNNNNNNN the organizer intro 😊

[@PanTheOrganizer]

😁😂👍🏻

[@yvesst-jacques3989]

I use a Suttner ST-2605 that I paid $85 at PASUPER witch I love, seems really similar with MTM or SGS

[@DJJDSKREWED]

Love my active v52 I gotta upgrade to the 2.0 and their gun!

[@theunkownmr.562]

I think the OG spec gun is just a bit too overpriced. It it was 150, I'd consider it. I'm only an enthusiast, so I'll stick to the SGS28.

[@DNightNinja]

Been looking at a sprayer gun from carbon collective. About $100 and not a single review on KZbin surprisingly. They’re a uk based company from what I can see but stainless internals, but what’s really getting me is the color. Hard to ignore that color.

[@DNightNinja]

Also has a swivel and it took me forever to see that lol. Fittings can be customized to an extent with m22, karcher, or Nilfisk Alto, C, E & P Series hoses.

[@PanTheOrganizer]

I have never tested Carbon Collective stuff. I don't think we have those in Canada. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 980,000 subscribers and we have over 132 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@therealmatthewsmith]

My boy Pan getting freaky with the quick connect! You dog 😝 😂

[@PanTheOrganizer]

😂😂

[@amill1563]

Please detail stereo and home theater.

[@PanTheOrganizer]

LOL

[@markjching]

I just purchased the Active. Can't wait to get it!

[@PanTheOrganizer]

Have fun!

[@Pittsburgh-412]

Man I'm definitely a detailing enthusiast but no way can I ever pay $258 for a spray gun. I can see if I did detailing for a living but not as a weekend warrior

[@goergebriceno7843]

I feel like the safety on the trigger is for when u change the tips because I know that has happened to me so many times 😂I always spray water rushing to changing tips

[@nathanfortpapa]

Does the quick connect leak on any of those?

[@PanTheOrganizer]

I haven't had any of these leak.

[@mikebreen1117]

Hi Pan, another informative video. Thanks! Is the mtm sg35 stainless steel ?

[@armoredsaint007]

I like my Active but after a month that 2-stage trigger/click got stick and actually it rusted up inside when I opened it up, Active did have a recommendation to remove it but why delete a feature that was standard, they did finally replace it for free - great CS

[@PanTheOrganizer]

Good to know! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@troyhenry3267]

Pan, love the channel! I have the OG MOSMATIC SPEC MODEL and love it!! I've had for about 5 years!

[@PanTheOrganizer]

Thanks Troy! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 920,000 subscribers and we have over 120 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@troyhenry3267]

@PanTheOrganizer been a subscriber for a few years now!!

[@PanTheOrganizer]

Oh good, thanks for your continued support. Always nice to see people faithful to the channel through the years. It means I'm doing something right! :). Making these videos takes so much time and energy, but my viewers' feedback is so awesome, it pushes me to continue.

[@luisramirez6159]

Saludos, MTM la azul es la mejor yo la recomiendo, gracias buen video 👍

[@PanTheOrganizer]

Gracias!

[@doesntmatter3779]

Hi Pan, I’ve been looking into buying one of the short guns for my pressure washer but I’m a lil confused how do I control pressure with them? Is it just controlled by the different nozzles?(my standard karcher gun has its own display with control of the pressure so that what confused me how will I be controlling it without that thing, hope u know what I mean) Sorry for a stupid question but I wasn’t able to find any explanation about it in the internet, thank u very for the answer in advance. Love ur channel ❤️

[@kimnewling5728]

Cant go wrong with any of them. Matts OG gun looks amazing. Thanks Pan

[@PanTheOrganizer]

Thanks! What pressure washer and gun are you currently using?

[@JuanOnjuan-kp7tp]

I’m so confused people keep saying og gun. OG doesn’t make a gun

[@kimnewling5728]

@JuanOnjuan-kp7tp OG collaborates with a company to make their guns. He tells the company his specifications, and they build it.

[@JuanOnjuan-kp7tp]

@@kimnewling5728 so he chose to have mosmatic duplicate the gun they had already made and sold and only made the swivel shorter?

[@kimnewling5728]

@JuanOnjuan-kp7tp not exactly sure, in all honesty. All I know is OG had a lot of input while they built a different gun. Good question to ask OG.

[@taylor315]

19:23 Good to know that about pressure vs flow. Thanks Pan!

[@PanTheOrganizer]

You bet!

[@Loopsrainforest]

Not to be an annoying nit picker but as a stainless fabricator the way people say 316 stainless is three one six & not three sixteen. Just thought I’d chime in.

[@francoisbrisebois2720]

At the beginning of the summer I bought the McKillans gun M22 recommended by your friend IMJOSHV and I am very satisfied so far.

[@PanTheOrganizer]

👍🏻

[@ricardogomez01]

The only thing I don't like about McKillans gun is that it doesn't swivel when it's under pressure. The Mosmatic, SGS28 and Active do.

[@maryhoffman2547]

Awesome video! Thank you Pan 😊

[@PanTheOrganizer]

Thanks for watching!

[@raulruelas9443]

Thanks for making this video!!

[@PanTheOrganizer]

Glad it was helpful! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 965,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@jedsantos1822]

Hey Pan, my question would be out of the topic. Is it okay to use a m22 3/8 quick connect fittings to a 1/4 size m22 hose?

[@richardseem7948]

Top notch review and comparison good friend

[@PanTheOrganizer]

Thank you!

[@snowpatrol685]

you are good pan !! keav likes 3/8 inch hose better than 1/4 inch hose. is there really a difference ? what do you prefer ? thanks for the awesome content.

[@shumardi1]

The smaller hose would definitely give you more pressure drop. I wish MTM had a 1/2” hose instead of 3/8”.

[@KenyonPayne]

I'm liking the equipment testing. Would you consider trying the simoniz platinum 2.3gpm 2300psi brushless unit? Looks like it's a new model for this year

[@ownedant8026]

Great video! I have just recently upgrade to a basic pressure washer but the spray gun is so awkward and long to use. What about the best options for pressure washer hoses?

[@PanTheOrganizer]

See my video on pressure washer recommendations at different price points, we talk about upgrades and accessories too. Here: kzbin.info/www/bejne/lYbafJJmi6l-ZtE

[@avinashbhogun]

Solid feedback Pan & community! I’ve been using my BigBoi WashR PRO (2023) specifications. Alongside with the stock gun/lance coupled with the MJJC Foam Lance (Cannon) Pro (V2). Can anyone recommend a gun/lance upgrade with the appropriate stainless steel quick release connectors? Thanks in advance! (I’m from the United Kingdom so some of the Obsessed Garage items are quite expensive to import in.)

[@PanTheOrganizer]

If you're in the UK, check this popular supplier's pressure washer accessories: shorturl.at/k6Gc8

[@jimmyccee1083]

Off topic, but can you do a video how to wash, polish, etc your car in the heat…no garage available

[@danakern2440]

Curious as to what goes through these guns at 300 degrees Fahrenheit

[@maryhoffman2547]

Hot water

[@homewrecker44]

300 degrees = taco bell aftermath.

[@FRENCH_T0ASTER]

just subbed! you're sooo close to 1M subs

[@PanTheOrganizer]

Yes! What a great journey it has been so far. I’m blessed with a great audience. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 1 million subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@400080vikkash]

I really thought I'd see the Mckillans, I just bought one 😅

[@PanTheOrganizer]

You mean this one? amzn.to/3QIxnZ3

[@400080vikkash]

@@PanTheOrganizer yeah that's the one 👍🏼

[@PanTheOrganizer]

Yeah ImJoshV likes that one.

[@_DannyG]

I’m getting the blue mtm gun!😁

[@trieuvu3536]

I have a question for Pan or anyone who cares to help, I’m not a professional detailer. I have a Karcher K5 and a jmmc V2.0 foam cannon. I m interested in the Carbrite gun (the least expensive on this video), or any decent gun for my set up. Most importantly. the gun must fit. On the Carbrite site in the UK, there is a choice of connectors, one of which is for Karcher k. The gun is not sold with that connector outside of the UK, so it seems to me. There are connectors on Amazon too, but I have no idea how good they are or if they fit at all. I live in Montreal Canada (Pan does too), I have to order from Alberta and Toronto, and when things I receive don t match, it s frustrating. Is there a place in Montreal that supplies detailing material? Your advice is very much appreciated.

[@PanTheOrganizer]

I am not a connectors specialist unfortunately. It gets complicated with the K2 to K7 pressure washers, as they use proprietary K series bayonnet style connections, instead of the classic 1/4" quick connect styles. So it gets complicated when trying to modify those to add aftermarket accessories. You'd have to do some research on forums to see what can be done. But to my knowledge, you can't change the gun and wand on a K5. I had a K5 for ten years, and the only thing I had found was to use an adapter to have an aftermarket foam cannon. But the wand itself was directly connected to the hose.

[@stefanski8287]

check out the Suttner Pressure Washer Gun ST-2605 ... let us know your feedback on it

[@jettangeles2707]

how does mckillans compare to any of these? i just bought it for about $60 and they have the same stuff as these more expensive guns do

[@harley092355]

Wrong

[@jettangeles2707]

@@harley092355 can you please elaborate instead of just saying "wrong" 🙄

[@santoshernandez9231]

Nice vid Pan, I own my OG and love it, also own a kranzle pressure washer, with all your vids and info from OG I am just about to start my detail business here in Colorado, thanks to you and OG, thanks again keep doing this it’s more than a video it’s life.

[@PanTheOrganizer]

Thanks Santos! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 920,000 subscribers and we have over 120 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. And since you're planning on starting your detailing business, I have a bunch of cool videos that can help you out. Check these below: ✅ Is detailing really worth it? : kzbin.info/www/bejne/j6KUc5KLgLOUr9E ✅ 20 year old detailer making $130,000 a year: kzbin.info/www/bejne/nWGbmJ6tm9tkjc0 ✅ What products do you need to start a detailing business? kzbin.info/www/bejne/fH3UXqmBfrybgdk ✅ Custom installation of equipment in a mobile detailing van: kzbin.info/www/bejne/f3W4qJmibaygnbc ✅ How to start a mobile car detailing business: kzbin.info/www/bejne/jYeWd32ZjMtqbas ✅ How to become a successful entrepreneur: kzbin.info/www/bejne/rYWml4mjmrKYe9E ✅ Mobile detailing truck setup: kzbin.info/www/bejne/qp-pm5uhgpmMgNE ✅ Things I wish I knew before I started detailing: kzbin.info/www/bejne/iYrUiIWnZ5yMnas ✅ How to be more efficient at detailing: kzbin.info/www/bejne/aWSmmZSDm52Xea8 ✅ Digital marketing to grow your detailing business: kzbin.info/www/bejne/Z3THZIFnnJugidk ✅ How to rank your detailing website on the 1st page of Google: kzbin.info/www/bejne/pn_JnZmums2jfsk

[@santoshernandez9231]

Discovered on you tube while looking for some detailing vids and then you mentioned Matt from Obssesed Garage, been watching your videos and products reviews for a while now because you I definitely going to start a mobile detail business, thanks for all your efforts by providing us with all your knowledge.

[@PanTheOrganizer]

Thanks for the feedback. You're at the right place to bring your detailing game to the next level for sure. ;)

[@JuanOnjuan-kp7tp]

You own the OG? What model pw gun is an OG? The original red MTM gun?

[@PanTheOrganizer]

The "OG" is the Obsessed Garage version of the Mosmatic. Matt Moreman (CEO of Obsessed Garage) worked directly with Mosmatic to create an even better and higher quality version of the already mythical Mosmatic short gun. I have it linked in the description. You can hear all about it in Matt's video here: kzbin.info/www/bejne/Y3LIiHiroM5ng7M

[@KonstaNykanen]

I think a short gun is definitely a must have upgrade to any pressure washer set up! Awesome video Pan as always!

[@PanTheOrganizer]

Thanks Konsta!

[@KonstaNykanen]

@@PanTheOrganizer 👍🏻❤️

[@basketball798]

The price jump for og spec is significant! It really wouldn't make sense to use that with my $99 Ryobi lol.

[@PanTheOrganizer]

In that case, yeah I agree. A setup needs to be balanced. A high end short gun that costs more than your pressure washer makes zero sense.

[@king1ny]

Nice review excellent. why on Amazon is it called by this name?AgFinium SGS28 thanks.

[@thatmidlifevlogger4463]

Will all the 4 options connect to the Kranzle 1152 TST without all kind of peripherals ? Thanks man.

[@PanTheOrganizer]

You need a quick connect adapter on the end of your pressure washer, to accept the 1/4" type plugs from the guns. Those are universal. My setup: Pressure washer: bit.ly/3d5kZeK Gun and wand: bit.ly/3ovIcPA

[@JuanVazquez-gg8nc]

Pan What orphis do you use ?

[@PanTheOrganizer]

I use a 4.5 orifice on my Mosmatic gun, and that generates 1000 psi and 2.1 gpm of water output on my Kranzle 1122TST pressure washer. The size of the orifice depends on what pressure washer you are using, and what water flow or pressure you want to achieve.

[@JuanVazquez-gg8nc]

@@PanTheOrganizer thanks pan 💯

[@daniel781278]

Hi Pan, Thanks for that great video. That link to the UK is that to old Masmatic pressure gun ? Or are my eyes playing a trick in me 😅

[@PanTheOrganizer]

Yes as the OG spec isn't available in the UK. You'd have to click the USA link and have it shipped to you if you want the OG Spec.

[@Lucas-ie2ti]

Another wonderful review! Any recommendations in 50' hoses? I just ordered the active 2.0 and MTM gun :)

[@PanTheOrganizer]

What country are you from?

[@Lucas-ie2ti]

@@PanTheOrganizer united states

[@PanTheOrganizer]

Here's a 50' that is often recommended: amzn.to/3M3Q2ds This too: amzn.to/48UWyhQ If you have a bigger budget and want one of the best, this one: amzn.to/3M5cMvc

[@Lucas-ie2ti]

@@PanTheOrganizer thank you pan! You are the absolute best..

[@PanTheOrganizer]

My pleasure Lucas!

[@rickraub5448]

How does the swivel Mckillians compare to these guns?

[@PanTheOrganizer]

I haven't tested that. But my friend Josh did in this video: kzbin.info/www/bejne/n4nIZn1mm5dnZpIsi=KZATQzQA7IW4L51O

[@shuycg]

Can I use these with a mid range Karcher? I'm done with the gun on that. I bought a better hose. Now to change the gun. Don't actually know what pressure it produces. I dont think I can vary it, but I presime the max would be nowhere near 2000psi. Hopefully powerful enough. I don't wash my car that often (livong in Europe, I'd rather jump on my bike if its not a fun drive), so don't really want to change that, too. I guess some fittings are something I have to source. Are any of these easily available in Europe?

[@PanTheOrganizer]

It depends which Karcher pressure washer you have. If it's a K2, K3, K4, K5 or K7, unfortunately those use proprietary bayonnet style connectors (K series connections) and won't be compatible with accessories using the standard 1/4" quick connects. If you have a K1700 or K1900 series, then yes you can buy these pressure washer guns with 1/4" quick connects.

[@COMMANDER-ONE]

Great video sir

[@PanTheOrganizer]

Thanks!

[@MCMS331]

I love the active & OG spec gun. Both two of my favorites. After your video on the active 2.0 pressure washer I want to get one. If you can what do you think about the BigBoi stubby gun?

[@PanTheOrganizer]

I haven't tested the Bigboi pressure washer and gun yet.

[@MCMS331]

@@PanTheOrganizer I thought about purchase but I wanted to see how good it is before hand.

[@MCMS331]

@@PanTheOrganizer thought it make for a good video too.

[@360Link]

Hi, which Nozzle size for Karcher K7 and which power settings on Karcher to set up (half or full power)? Thank you

[@PanTheOrganizer]

I haven't tested the K7, it's not available in Canada. It seems to only be available in Europe.

[@doesntmatter3779]

I have kinda the same question but with my karcher k5, have u found any info on what’s better and what to do with that? (still haven’t received my short gun, but I’m already a bit confused how to control the pressure on the karcher now)

[@LilCrazyMan9389]

Do you think the sgs28 pro kit is worth it? It includes the wand, the grey hose, and the foam cannon

[@PanTheOrganizer]

If it's in your budget, yes.

[@alanhefter4659]

It looks like the inlet side of all of those models has a male connection. I have the Karcher unit that you also used to own but my hoses has a male end on both ends. Do I need a diffemt hose?

[@PanTheOrganizer]

If you have a Karcher K2-K7, they use proprietary connections, so standard 1/4" quick connects like these short guns and other accessories will not fit. Karcher uses a proprietary bayonnet style connection. The K1700 and K1900 pressure washers do use the traditional 1/4" quick connect so that would be ok.

[@caglassc]

Pan - what orifice size do you recommend for the OG Spec Mosmatic Nozzle Assembly?

[@PanTheOrganizer]

I use a 4.5 orifice on my Kranzle 1122TST. It depends what pressure washer you are using. He has a chart with his recommendations on the website.

[@tabikes69]

What brand do you recommend for ceramic coating to apply in my car?

[@PanTheOrganizer]

All my top recommendations are in my popular annual car detailing products awards video here: kzbin.info/www/bejne/nYPapK2krMuHrac

[@ERDG516]

$190.00 for the OG priced now

[@mattcan69]

Des critiques fantastiques !! Merci beaucoup Pan, le détail a été très apprécié. À tel point que j'ai acheté le pistolet Active Washing, les émerillons automatiques Princess ont échoué avec succès 4 fois de suite, d'où l'achat. J'ai hâte qu'il arrive !!!😃😃😃

[@PanTheOrganizer]

Super! Tu m'en donneras des nouvelles.

[@mattcan69]

@@PanTheOrganizer absolument ! L'argument de vente pour moi était la taille et (avouons-le, la partie la plus cool) l'intégration pivotante avec connexion encastrée... elle a l'air très élégante.

[@PanTheOrganizer]

C'est quoi ton nettoyeur haute pression?

[@mattcan69]

@@PanTheOrganizer Actuellement, j'utilise un AR big blue avec environ 2,2 GPM. C'est une excellente machine mais le moteur de 20 ampères, j'ai dû refuser mon disjoncteur car il n'était réglé que pour 15 ampères dans mon garage. La laveuse est une bête !! je l'adore et j'ai hâte que le nouveau pistolet arrive, j'espère cet après-midi ou demain :)😃

[@PanTheOrganizer]

Tu as du bon stock!

[@y.y1678]

Hi Pan, what nozzle size you use? I have the same pressure washer, i am using the OG 40-4

[@PanTheOrganizer]

40 degree tip, 4.5 orifice nozzle

[@JT-bb3ip]

Are the threads on the 1/4” qd on the active npt thread? I was thinking of getting one and swapping with the OG fitting

[@PanTheOrganizer]

The Active gun fits on my Mosmatic quick connects on my Kranzle hose.

[@TheRebornBNASTY]

July?? Pan it’s August 😂

[@PanTheOrganizer]

I film my videos ahead of time! I'm always a month in advance. I need time to edit, produce and publish the videos. ;)

[@afshars5791]

I'm curious how these compare to McKillans $60 gun with swivel

[@Bakedbanana007]

Imjoshv has a review comparing these guns with a McKillians if you’re interested

[@PanTheOrganizer]

See this video: kzbin.info/www/bejne/n4nIZn1mm5dnZpI

[@peterbowman5750]

Would these be compatible with a Greenworks pressure washer?

[@PanTheOrganizer]

If it has standard 1/4” quick connects yes.

[@Scuppun]

Fantastic video Pan. I just upgraded to the MJJC swivel gun for a Gerni pressure washer with the MJJC pro snow canon v2. Very easy and lightweight to use with great results. Not much to get directly here in Australia, but your videos have got me testing products from around the world with great results. Thank you.

[@PanTheOrganizer]

Thanks mate! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 920,000 subscribers and we have over 120 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@benjaminofperrin]

Hey I just bought the same thing for my Gerni. Hope it goes well for you.

[@Scuppun]

@@benjaminofperrin can't complain. It's been great