DIY Table Saw Sliding Carriage / Mobile Workbench EP 2

[@Paoson_Woodworking]

Plans for this project: bit.ly/3iRfbd9

[@youtukang]

👏👏

[@NickBR57]

I'd like to buy plans but unfortunately the website only allows me to enter United Kingdom as my address and no other details. Although this is a figural purchase it requires a physical address and won't let me enter one, so sadly this is a lost sale.

[@PunkR0ckz09]

@@NickBR57 Just contact him directly, he's very active on his forum and I am sure he can figure something out, maybe that wasn't thought about? I didn't have issues with my address, but I'm from Canada

[@PunkR0ckz09]

Hey Paoson, to align the tablesaw to the sliding carriage, the easier method would be to wait until you have done the grooves on the sliding carriage, then measure the distance in between your sliding carriage's dado and the tablesaw's dado, cut a plywood piece of that size, put 2 "runners" in each dados and clamp the tablesaw's "runners" to the sliding carriage's runners, making sure that the runners don't stick out too much. That would align the dados perfectly (IF your tablesaw cuts straight the plywood obviously) and then you could fasten the tablesaw. I find that using your method (with an adjustable square) it is too random. Sometimes the ruler on the square isn't tightened properly, sometimes you don't reference properly to the dado of the tablesaw (mine has a very big chamfer, it touches the chamfer, not the flat wall), or sometimes you don't rest the square the same (the ruler is higher or lower, more angled) so the lenght is in theory not the same

[@ladislavbago9451]

​@@youtukangqqqqq

[@markhedquist9597]

That is a SUPERSTAR idea with the drawer underneath for added support. You never fail come up with innovative designs and details for your builds. So impressive!

[@Paoson_Woodworking]

thanks Mark!

[@tri-forceblades3123]

You are extremely gifted in engineering. One idea I had that might improve on your design would be to use a rare earth magnet on the metal tabs sticking up so you would not have to focus on using your body to push the drawer in while sawing. Once it reaches the full travel of the slides it would seamlessly break contact to allow the sliding function to continue.

[@tianwang]

his shop‘s dust collection is so perfect that he has a rug in it.

[@pf5658]

I was about to make the same comment and then I saw yours. 😂

[@TheSNIPERmac]

Sir, I just have to say, you're eye for design and detail is second to non. This is by far the best multi table design I have seen in ages. Thank you for sharing, I really enjoyed watching these videos.

[@samspade4634]

That is one of the best ideas I have seen in a long time. Genius, pure genius. I will be purchasing plans in the near future. Great job. Man, that's cool.

[@Paoson_Woodworking]

thanks!

[@tonit.6021]

Me ha encantado el sistema que te has montado para el carro, es muy ingenioso. Seguro que lo has pensado mucho y le has dado muchas vueltas antes de hacerlo. ¡FELICIDADES!

[@Paoson_Woodworking]

gracias como siempre Toni! le he dedicado un buen tiempo antes de conseguir un diseño efectivo

[@stealthgsx]

素晴らしい設計と技術ですね。場所が準備出来たら真似させて頂こうと思います。 Great design and technology. I will imitate it when the place is ready.

[@mattg6262]

Congrats on what I think is the nicest mobile t saw bench concept I've ever seen.

[@kevinsorensen367]

That under drawer extension is brilliant!!

[@scottbionicnerf8727]

Thank you for sharing all this. This totally opens a whole new chapter in my woodworking.

[@Kler-beats]

Hello ! You resolve my questions about how to make a slider carriage ! Thanks you for all détails about how to and dimensions. Thanks you a lot, your work is vert inspiring !

[@hamishwatson2864]

Fantastic work, you are highly talented. Thank you for sharing!

[@natebean151]

One better table saw ideas i seen on KZbin

[@johnfulton8023]

Donated €30 Euro to the foodbank on your behalf. Do not need the plans but appreciate the effort and thought that went into them. honest jon

[@Ironlotus516]

You might aswell buy a sliding table saw if you go this route

[@theoahmwa]

Thank you for the very clear instruction and a precision work.

[@ShopNation]

Fantastic idea sir!

[@Paoson_Woodworking]

thanks mate! Nice to see you here

[@themplar]

This bench is absolutely genius. This makes so much sense to me. Specially like the fence and versatility.

[@nguyenhuuvinh8083]

You have a wonderful multi-function carpentry table

[@where_is_bob]

when I saw the sliding drawer for supporting the sliding table, I gog goose bumps, truly genius idea

[@jasonsodyssey]

Best set up for a portable table saw I have ever seen

[@chillyspoon]

The drawer is such a good workaround - ingenious yet simple!

[@youtukang]

👏👏👏

[@DenatBalla]

WOW just wow! Absolutely love this table saw bench design!

[@Paoson_Woodworking]

thanks!

[@oc_geek337]

Brilliant and exceptionally well executed!

[@pauloalbertovamosfalardequ6976]

Thanks my friend. Congratulations from Brazil

[@thegoodfight365]

Of course the sliding table is awesome. I was just as impressed with how well you explained the process of each step. Many awesome products on YT but rarely do the makers explain steps sufficiently without going overboard with entertainment. In my humble opinion, that is. Thanks for sharing your work. God bless you

[@johngaskey218]

The dual direction slide for larger stock is genius. This is a solid build for smaller shops like mine.

[@AbrahamFarrell]

I believe that some persons are borne to do certain thing and is so good to see that you found out what you were borne to do.

[@giulianopigozzi2062]

really... You come from another galaxy. I have never seen such an amazing project. Honestly and unfortunately out of my ability even if I could live 20 times ..

[@sergeystrizheus3368]

I wish I could buy this one in usa nobody's make anything like that here. You are the most smart man I seen on tube.

[@conkick1192]

Good job, congratulations.

[@pedroramos6408]

That's a great idea. I love it. Greetings from El Salvador Centro America.

[@stephan1906]

Very very very very very excellent idea!

[@johnfrazier9327]

Great work again Suso! I love the drawer brace support for the slider. The flip up tabs to open drawer as you pull are pure genius. One thought occurred to me was instead of using your leg to push drawer back in, Pocket a stack of a couple magnets in the wood to interface with those tabs. You may have to play with making the steel tabs a little bigger to get enough magnetic purchase but it sure would make it an automatic motion.

[@ianandrews1511]

Love this series. Dhane i get so much condensation in my garage to build nice things like this.

[@joeabad5908]

Very nice project..you have a neat workshop.. Every hand made tool is furniture finish. Fantastic.. Keep safe & Gogbless

[@rostamr4096]

Amazing design..love it

[@bonfiliotrejoangeles3886]

Extraordinaria visión, gracias por compartir su sabiduría. Saludos desde México

[@boostyler9818]

Great Design Mr Paoson

[@GrantOakes]

Chess masters try to think ahead 3, maybe 4 moves, but you have thought all the way to 10! Your forethought with the support built into the drawer for the carriage being able to cut much wider cross cuts!

[@ZoltanGyulai1965]

The drawer support is wow a great idea and the whole build is superb, thanks foe sharing

[@Paoson_Woodworking]

thanks!

[@philippangst]

Absolutely amazing! Wow! Thank you!

[@jy4508]

This is brilliant, thank you for sharing.

[@pepperman9]

Here's a tip. Place a magnet in such a way the drawer extender grabs the sled when used but not so strong it hold onto the drawer when letting pass.

[@silvergrizzly316]

Tim Byrnes, that's exactly what I thought when I seen how the metal tabs grab the drawer. Small magnet. Lol.

[@markielinhart]

Wow, you just made a versatile shop tool ULTRA versatile! 👏🌹🇦🇺✌️

[@youtukang]

👏👏👏🤝🇮🇩

[@wintersnot]

The drawer support addition is especially clever.

[@projectkayuakayuang2164]

many new innovations that I found here

[@anglobricks9086]

He is a very well organized individual 👍🏻

[@trdavis55]

Very clever and functional!

[@TheWolfster001]

Love the sliders for the table saw, I know the sled was as close as it could be, yet if the edge was much closer to the sawblade, it would be easier to cut angles & miters.. My table saw is also a slider, it is a Grizzly 14" 10HP.. Yes I know very expensive and takes up a lot of floor space.. I love your concept for the basically an all-in-one work station.. Sorry if I sounded critical, I actually love you design.. perfect for someone with limited space.. Thank you very much for sharing...

[@jbourgeois5092]

someone give this guy a gold medal!

[@Paoson_Woodworking]

haha! thanks

[@andreamarletta6414]

Just brilliant. Congrats

[@lennycruz4558]

Thats not a workshop...its paradise

[@marcodsv]

You are brilliant, a genius...insane work there. Thanks for sharing!

[@isidrorodriguez9494]

No se si algún día le sacaré partido pero hacérmela me la hago, nada más que ver el vídeo me entran unas ganas locas de construirlo, me encantan sus vídeos, enhorabuena.

[@michaeljoerg3776]

Fantastic Work

[@jjamontan]

Wow amazing talent

[@borgpunx]

Incredibly ingenious design!

[@daahodaar]

Oh man, this saw table is just awesome! I need to build one!

[@Paoson_Woodworking]

thanks!

[@ronwoolacott8880]

Just came across your video and absolutely love this build. The best one I have found.

[@sazikanebaldimor2386]

wow, I neeeeeeed that table for myself. Sooooo much. Thanks for posting your art :D

[@Golgafrinchamdent]

Applause for you choice of track saw. Bosch and Mafell are the only two worth having.

[@Rogerino87]

Complimenti. Sei un’artista! 🤙🏼👌🏼

[@ChrisHornberger]

Absolutely awesome. Nothing else to say.

[@kaushiksharma8390]

I have been doing diy wood working for about 18 months now and see countless hours of you tube videos… this is by far the most impressive video I have seen. That is an absolutely sensational design. Pure genius!!! 👍👌

[@Paoson_Woodworking]

thanks!

[@josephroberts7490]

Great job! Your professionalism is admirable.

[@AlbertNoffsinger]

EXCELLENT! I had an idea like this in my head when building a new workbench but could not put all the parts together to see it working out well. Thank you for sharing your idea and putting it action. This will be one of my winter shop improvement projects for sure. :)

[@nicolafabris1041]

I saw many precision and attention for genial solution !!! I think that you should send your CV to Bosch or Dewalt.....Many congratulations and many thanks for your kind sharing ! Ciao Nicola from IT

[@eagledaan-maakt]

I think that drawer for large plates is a good idea I think I will try that too

[@samuelyogo1864]

I loved it great job.

[@СергейБалюк-в6г]

Очень интересные идеи!! Безьупречное исполнение! Супер!👍👍👍✊🤝!!!!

[@gianluigileobruni9960]

Great job I do you my compliments you found fantastic solutions for your table saw I will take in account for my table saw regards from Italy

[@MrDefenderofsteel82]

Perfect, this is what i search for.

[@rhenokatshiociro2604]

The best table saw of KZbin very good work!

[@arnolddupreez5462]

Excellent and explanations. I'm going to attempt this project as it's the best I've seen and I've been looking for something like this for awhile. Will keep you updated. Thanks for your knowledge sharing. I'm retired now so hope to have more free time.

[@stingk5295]

This is just Great, I will build one!

[@primomapelli8013]

Nice work with smart solutions.

[@Paoson_Woodworking]

thanks!

[@irishfanrock3494]

Amazing project and even better video. This may be the best wood working video I have ever watched. Amazing job on the voice over explaining what and why. Great system you have come up with .

[@scottcardais3560]

Pretty impressive workmanship. Thanks for sharing.

[@Paoson_Woodworking]

thanks Scott!

[@charlier7711]

Very nice!! An elegant solution. Thanks for sharing.

[@louisdawson1797]

All the wood arrived yesterday will be start work tomorrow - very exciting

[@Paoson_Woodworking]

I hope to see photos of your progress!

[@andredionne7769]

NICE TABLE SAW GOOD JOB LIKE

[@TukangKayuofficial]

Alat yang mengagumkan 👍

[@Dublinjackel]

Wat an amazing talent, I would love to have the skill to work like that, well done bro

[@J4Julz]

Wow! This is a really great design- you have thought of every possible option :)

[@ktalanguyen]

You are an unique wood working engineer. Awesome table saw work station designed Mr.

[@Paoson_Woodworking]

thanks!

[@derekbisbing1138]

So many great ideas! Well done

[@MrJo89600]

your design is just amazing .... i have been following you for a while and you are just awesome !!!! good job...

[@Paoson_Woodworking]

thanks!

[@stevesiefken6432]

Nicely done! ✅👍🏻

[@juniorpachieri4968]

eres un genio , con cosas sencillas has hecho algo muy bueno !!!

[@adrianthomas4163]

This is very impressive!

[@joeabad5908]

The drawer doubles as a sliding support is, Simply Genius..

[@kanedNunable]

very clever. nice work!

[@PlywoodCraft]

woow.... pretty good idea, thanks for sharing the video. it's very useful for my workshop.

[@Paoson_Woodworking]

thanks!

[@michaeldaaboul3275]

beautiful! thanks a lot

[@angiotad]

Gran bel lavoro! sei molto bravo. Ma non avevo dubbi, ti seguo da anni.

[@jimchallender4616]

Impressive well throughout design!

[@pecosimplu7070]

Wonderful . I'm realy impressed. Manny thanks for making and posting this video 👍👏👏👏 Respect maximum

[@jorgeconcheyro]

Te quedó fantástico, felicitaciones.

[@olli1771]

WoW! god work. Thanks!

[@nandarinterior5367]

Fantastic idea sir!!!!👍👍👍👍👍👍