Part 1 - MGB banjo axle / diff overhaul / So oldt

Measurement of the play between pinion and crown wheel.
Removing Left and right bearings to measure the thickness of the shims

[@johnkamphuis9359]

Thanks for the video, it will help me to get rid of the play in the differential which causes a "clunk" One remark though; you mention the sum has to stay the same, 0,7 mm, but should this not be 1,2 mmm, including the play on pinion/crownwheel ??

[@jimmurphy4703]

Why would you not replace the bearings ? Cheep insurance! Do you not have a brass hammer ?

[@hankpb1]

hi any videos on banjo axle rear oil seals?

[@hankpb1]

is it easy to remove backlash

[@keesstam909]

DO NOT USE A CHISEL!!!

[@sooldt6591]

Hey Kees Stam. Thank you for watching my video. "Never use a chisel". That is what i also would say (think) when watching dismounting bearings. But there is realy no other way to dismount the bearings of the diff housing when you want to reuse the bearings. When dismounting you must pull on the outer ring. So i did the chissel way. Maybe you can share an other method . Using a knife puller is not possible because there is no place . Have a nice day Stam. Pleace subscribe to my chanel.