Part1

Thanks to Der Glanz Auto Spa www.derglanz.com/
It took 30 years of experience and working alongside the top Ph.D. chemists in the world to make C6 Ceramics a possibility and create unparalleled Gloss or Hydrophobics for a duration deemed Permanent. That was our Goal, and C6 is our achievement. Utilizing state-of-the-art technologies, we have developed what I think is the best ceramic coating in today’s market.
#c6ceramics #hydrophobics #bestcoating #lifetime #ceramiccoating #diamondcoating
- Yvan Lacroix, Founder

[@BreezeMW]

Amazing stuff Yvan. Can’t wait to see it more in action

[@C6ceramics]

Thank you.

[@neilwalker5041]

I love APP and will always use this product. The application is quick and easy.

[@C6ceramics]

Thank you.

[@stevenv9224]

Ok Yvan mean business 💪🏼💪🏼👍🏼👍🏼

[@C6ceramics]

Always

[@BorderlandCorvette]

Therefore before using app we should do a one or two step paint correction then panel prep spray then use APP on short throw and remove with dry towel No Panel Prep Spray after that correct then coat the beauty 🎉

[@C6ceramics]

Almost, if you use The Gold Standard Polishing System no need for panel prep.

[@1stfrompuertorico568]

Part 1 released after part 2😜

[@C6ceramics]

Only you would catch the 20 seconds of difference

[@gorillanismo]

Im so excited fir this, but I have 3 main questions: 1. Does APP contains protection by itself? So, can I apply it as my LSP? If so, what is the average durability? 2. If minimum cut is desired, why not apply it with a rotary? I assume a rotary have less cut than a palm sander because it has no stroke vs 5-8mm on the sander. 3. Can it be used on ppf?

[@C6ceramics]

The app does, but it won’t be long lasting. The rotary over works the APP because of the long uninterrupted motion of the pad, so do long stroke polishers. Yes it can be used on ppfy

[@Detroit4Life1944]

Two questions. 1. Are you applying any pressure while polishing? 2. Is it safe to say if you have more than basic correction to do on the vehicle you do that with a compound of your choice then follow up with this then apply coating?

[@C6ceramics]

No pressure, and yes this is just to prep and gloss.

[@HeavenlyDetailz]

BOOYAH!

[@C6ceramics]

Thank you.

[@trd3786]

I see your using the Milwaukee and the harbor freight Bauer sanders. Which was easier to use on the side panels?

[@C6ceramics]

Corded

[@stephensapp7233]

I cannot wait for my phone call on tuesday.

[@C6ceramics]

Thank you.

[@rcfreak9]

A list of all the tips/tricks mentioned in this video would be greatly appreciated by all of us for this new product, to make sure we don't miss anything.

[@C6ceramics]

Our installers have access to tech support.

[@rcfreak9]

​@@C6ceramicsNice. Us DIYers would appreciate a list of tips/tricks for APP also.

[@C6ceramics]

That’s why we have these videos

[@johnfontaine1257]

Just ordered app from the website- can I use the APP polish with a 6.25” rotary jeweling pad with a G9 DA machine? Will that combo still give the results from a smaller pad?

[@C6ceramics]

Yes

[@johnfontaine1257]

Excellent very happy I can use my current machines and pad sizes with APP!

[@jessehernandez3384]

Is this an extension of DIYs ceramics? I love those. What is the difference?

[@C6ceramics]

Primarily the addition of Refined Detonated Nano Diamonds.

[@julianmartinez6658]

Can the APP be applied with a Griot's Garage GG6 (8 mm) polisher on speed one? I bought a Ryobi cordless sander with the 5" velcro backing plate, but that thing sounds and feels like a jet engine taking off. It has only one speed, I can't slow it down. But I remembered my first polisher, which I don't use anymore (GG6), had the 8 mm throw. I was just wondering if that would work with the APP?

[@C6ceramics]

3-8 mm is fine

[@bgzz5146]

With APP do we skip polishing with gold standard with red pad on a rotary?

[@C6ceramics]

Yes you don’t need the gold standard, the APP give to us a great gloss

[@bheypuor]

What speed did you set on the milwaukee orbital sander ? I believe it goes up to speed 6? and did you take the rubber brake part off the orbital sander? Thanks!!

[@C6ceramics]

Speed 6, yes brake is removed.

[@ethanblan435]

Is the abrasive in there strong enough to strip any protection before the coating, or would you recommend a heavier correction step with gold standard?

[@C6ceramics]

That’s the goal.

[@thesamsquatch5224]

Its showtime!! Like and subscribe!!

[@C6ceramics]

Thank you.

[@FurtherDetails-ju1ek]

How is that cordless Milwaukee sander and what speed do you run it at? It looked smoother than the Bauer machine. Are there any other mods required for it?

[@C6ceramics]

It works well, you will need to remove the pad brake

[@GoTMLGo1967]

So with an 8mm TORQ 10FX dual action polisher I’d assume the lowest speed possible with the red pad would work?

[@C6ceramics]

Yes that good, do a little section and try to wipe ( just for make sure everything is good for you )

[@GoTMLGo1967]

@@C6ceramics great, thank you!

[@coltonhunter4603]

What applicator are you using for hand application of APP? What is the stroke on those sanding machines?

[@C6ceramics]

for the app we use the diy detail red applicator, the stroke of the sanding machine 3 mm at 8 mm max

[@1stfrompuertorico568]

First!!!

[@ivanigk]

Well you are 1St from puertorico :)

[@C6ceramics]

Thank you.

[@ivanigk]

Exxactly Like andd subscribe!

[@C6ceramics]

Thank you.

[@CMoore-sb4mo]

who makes the little disco ball inspection light?

[@C6ceramics]

www.lawsonproducts.com/lawson/Vision-Pro-Constant-Current-Cyclops-Worklight/DY80001220.lp

[@CMoore-sb4mo]

@@C6ceramics neat gizmo. thank you!

[@vicjensik5985]

Thoughts about applying it with a rotary?

[@C6ceramics]

The rotary over works the APP , making it difficult to remove

[@krishanand81]

Where can i buy APP in Canada and C6 Hydro light?

[@C6ceramics]

TOC Supplies will have them soon

[@fjoco1]

How long should I wait before applying the coating?

[@C6ceramics]

Between 1 min and 48 hours

[@fjoco1]

@@C6ceramics Thanks.

[@C6ceramics]

Our pleasure

[@themeridianmarmot1413]

What happens if you apply it with a rotary?

[@C6ceramics]

It over works the APP making it difficult to remove.

[@cameronjohnson1898]

Why a small sander vs a polisher?

[@C6ceramics]

The longer stroke machines overwork the product.

[@FurtherDetails-ju1ek]

​@@C6ceramicshow about a 15mm machine at low speed and with faster arm movement? What would be the consequence of overworking the polish?

[@C6ceramics]

Over working makes it hard to remove.