part2 DQ500 awd to kseries adapter kit installation

[@vilkersouza7180]

Hi ... Congratulations. I am Brazilian and here we only receive these models of VW Tiguan TSI without DGS. But I'm doing the transmission swap for DQ500 DSG, could you clear some doubts since in your country the DQ 500 DSG is from the factory?

[@SuperDrivetrainSolutions]

Hi, not all countries have DQ500 in these models. VW Tiguan Vw transporter fwd and awd Audi Q3 Audi Ttrs Audi Rs3 dq500 gearboxes available on ebay some times. Makes sure its awd.

[@alibabaei1953]

is there any other fwd auto trannys that could be fitted in k series. or we have to go only with vw gearboxes?

[@SuperDrivetrainSolutions]

@alibabaei1953 almost anything is possible. Name the gearbox and I'll make it happen.

[@frankdejong3703]

Where can I order the parts and wat dif do you used in de rear from wagon 91 ? (It's for my eg ) I need automatic because I'm in a wheelchair ♿️

[@SuperDrivetrainSolutions]

Hi. For awd setup, you need my awd adaption kit I have available. Then you need to fit a vw haldex Rear diff also. This is mandatory with dsg awd. Contact me for further info and purchases please. Whatsapp [phone] Email [e-mail]

[@user-mv5ej1se6k]

How much for the complete conversion and what’s included

[@luisdomingues2237]

Do you still sell the kit for k series engines? send to Brazil? I wanted a kit for the 2007 accord k20

[@SuperDrivetrainSolutions]

Yes I have stock. Please email [e-mail] or whatsapp [phone]

[@heavychevy4443]

also will you be making a kit for fwd dsg trans

[@SuperDrivetrainSolutions]

There is already a kit available for DQ250 fwd available.

[@MrSir2egk]

Will you make custom adapters? Looking to do same transmission (RS3 AWD) in Evo 8 with a 4G63

[@SuperDrivetrainSolutions]

Hi, I am busy with 4g63 to DQ500 adapter kit. Very little interest, so it's not top of the list. If you in a hurry, send me a whatsapp.[phone]

[@FirstLast-tx3yj]

@@SuperDrivetrainSolutions how do you control the gearbox?? Do you have a custom tcu?

[@SuperDrivetrainSolutions]

@@FirstLast-tx3yj for the dq500, there is limited controllers availbe. Maxecu, syvecs, HTG

[@heavychevy4443]

is there a link to purchase this kit?

[@SuperDrivetrainSolutions]

Contact me on whatsapp please [phone]

[@omarsantiago1010]

@@SuperDrivetrainSolutions I need this!!! I'll give you a call or text you.

[@vtecminileon]

How do I get in touch with you?

[@SuperDrivetrainSolutions]

WhatsApp [phone]

[@96awdek]

Will these dsg gear boxes support 700hp?

[@SuperDrivetrainSolutions]

Stock dq500 - 800nm Add Deka clutches - 1500nm

[@96awdek]

I’m looking to do this swap in my Honda would I need a controller to run the haldex rear diff clutches as well?

[@96awdek]

What’s the cost of the transmission controller

[@SuperDrivetrainSolutions]

@@96awdek we use VanDer Vee racing Haldex controller.

[@SuperDrivetrainSolutions]

@@96awdek dsg controller options... Maxxecu, Ecumaster, Syvecs It will do engine, dbw, dsg.

[@brandonbutler7297]

How much power can the dq 260/dq500 transmission hold...reliable

[@SuperDrivetrainSolutions]

Dq250 550 to 650nm Dq500 700 to 800nm All depend condition of gearbox, clutches, and oil. Also if you can manage the heat properly then it helps alot.

[@brandonbutler7297]

@@SuperDrivetrainSolutions ok....but can the transmission component be upgrade to hold up to 1000+hp.

[@SuperDrivetrainSolutions]

Lots of upgrades for DQ250 and DQ500 available. Dodsons clutches alone takes it up to 1000nm. Ant there are stronger gears and flywheels availble.

[@brandonbutler7297]

@@SuperDrivetrainSolutions can the honda axles work on the front or would it have to be vw or audi axles

[@SuperDrivetrainSolutions]

@@brandonbutler7297 for the fred kit some guys get away with using right front oem axle. Left front custom for sure. For awd need custom both fronts. Unless you change outer hubs to vw style, and try and match some vw axles.

[@hugogabrielmoll2477]

Qual ECU utiliza?

[@SuperDrivetrainSolutions]

I have know idea what you asking, but it sounds like ' what ecu we use? ' Maxxecu or syvecs or HTG. For dq500

[@hugogabrielmoll2477]

I have the dl501 and I don't use the original engine. which TCU I use to manage. I am from Brazil.

[@SuperDrivetrainSolutions]

@@hugogabrielmoll2477 for the Dq501, HTG only. But you can ask syvecs and maxxecu if they could support it.

[@hugogabrielmoll2477]

@@SuperDrivetrainSolutions Do you know how much it costs in euros? In the engine I use FUELTECH (programmable injection). Is it possible to use both modules?

[@SuperDrivetrainSolutions]

@@hugogabrielmoll2477 fueltech and HTG will work together. I think HTG is about 1000euros, plus harness and modify mechatronics. Checkout thier website and their facebokk community page.

[@user-mv5ej1se6k]

How much for the complete conversion and what’s included

[@SuperDrivetrainSolutions]

Please whatsapp for pricing and availability. [phone] The adaption kit brings the DQ500 and 4g63 together 100% The full swap kit consists of everything else to fit it all, including fitting the haldex diff.