Passive Phone Speaker

This speaker amplifies the sound without using any electronics.

[@dfu1685]

Great job on the music selection too!!! Beautiful creation 👌🏼

[@samodea4875]

Was hanging out for the test at the end, and you drop what a wonderful name in.. absolutely stellar. Praise to our King

[@patrickfoster8252]

Same. Glory to our God!

[@adamgendreau6313]

Great build and an amazing song !

[@danalaniz7314]

Really cool. I'm just starting out so I envy you for all the great tools you have. Will still give it a try with my hand tools.

[@purplehelm8853]

The song at the end and the awesome vid convinced me to sub and like! Thanks!

[@Benjamin-gn5nc]

Cool box & an amazing song!

[@PastorTWoodworks]

Good job and excellent choice of music!! 👍🏾🙏🏽

[@michaelbedell6523]

WAY COOL, ABSOLUTELY #1 for a simple design requiring minimum tools.🙌🏻

[@andersstorruste6552]

Love the music you put on!!😍

[@natarakiak3899]

Good choice of music, elegant speaker

[@trevihehalatu]

The song at the ending of the video.. love it.

[@brianbaird8809]

Great work and song choice !

[@collinborsheim]

Been singing that song at the end every Sunday for 3 years!

[@JuandePedro-ui1fk]

WHAT A BEAUTIFUL NAME IT IS...AMEN TO GOD BE THE GLORY. NICE WORK BRETHREN!

[@robburnside6636]

I experiment with boxes occasionally. I love the simplicity of this.

[@humbertomonroy942]

Hey buddy, to me the best and simple design, with and great look. Good job!!! congratulations, thanks for sharing.

[@honeygirlsapiary]

Great song! Powerful! Amen!

[@RafaelGonzalez99]

Muy inspirador, excelente trabajo.

[@jsptraveler3001]

Hey! Very good ideas in making this phone speaker. thank u Bless you!!!

[@DF13939]

God bless you brother!

[@nealwright5630]

This is the same principle as an antique Victrola. I've wanted to build one of these. I imagine, if your top and bottom pieces were thinner, they might be able to convey more lower-end frequencies for a deeper sound. Also, a _riser_ 1/8" high by 1/2" wide in the middle of the spot where your phone sits might raise the phone enough to help the sound escape better than having it sitting down on the wood with the speakers pointed down.

[@dgoins6]

I came here for the same reason. My speaker is on the bottom right. Wouldn't this design block the sound?

[@Chefcooken]

Neal, interesting points. I’m learning about materials and forms for amplifying sound in a keyboard. How would thinner pieces create a deeper sound? What might I be looking up as examples to learn more about this.

[@donaldduck4867]

Cool! I'm guna try it! Thanks for the grateful video!

[@leesmith9467]

This is far and away the easiest looking way to build a smartphone speaker. I can definitely do it with the tools and wood I have on hand. However, are there any measurements to it, or is it just eyeball? What about for the shape of the sound channel. I can probably figure things out from the video, but that would be a PITA. Still, I like it...

[@MannyWoodworking]

Love the video and the song to.

[@somarz]

Great job!

[@johneygd]

Looks really cool, well nice crafted together, if there will be actual products like this on the market, that would be cool.

[@Tribal_Dad]

A powerful name it is, indeed!

[@jovinosoares1883]

Muito bom ! Gostei da música também! Deus abençoe

[@adrir7473]

Muy buen trabajo, hermosa alabanza bendiciones!!!

[@hadftrose5115]

This song,love

[@anesaizocana8091]

Thank you Lord!

[@randys5478]

Looks great and sounds good. Looks like a fun build. Some basic dimensions would have been helpful

[@jiromaru]

That was very helpful for me👍

[@marquesmelofilho9424]

Wonderful praise... Praise for our Lord Jesus Christ

[@julioabencoado4508]

Very good!

[@petrosbadalyan326]

It's amazing!❤

[@jorgegodoy2927]

Buena cansion para mostrar la amplificación 👍🏻

[@WoodArt-IvanildoGoncalves]

Very Good!!!

[@glennryzebol4472]

I dig the vid brother. And way to slip in some praise for our Lord Jesus as well. Thumbs up!

[@rafaellondono1882]

Kaizen... excelencia, es el camino de honestos....gracias por sus enseñanzas... abundancia, prosperidad, amor, salud, alegría, armonía...para ud y su familia...hare krishna

[@Robson45634]

Ficou muito bonito!Parabéns! Deus abençoe ricamente sua familia.

[@m_03084]

Excellent speaker and excellent design 👍 What are the dimensions of it?

[@letristassemfrescura]

PARABÉNS Robison, ficou melhor com esse louvor no final.

[@mikemattingly5825]

Good song choice.

[@leandrofuica6265]

lo mejor, la canción !!!

[@PERRYS_PROPS]

Very nice, thanks

[@carlosalbertodelvallerufas9761]

excelente Graciassss mil

[@detudoumpouco5220]

Fico muito bom Abraços aqui do Brasil

[@ClovisdeAlmeidaGodoy]

Muito bom! Very Good!

[@carlnielsen8570]

Appropriate to play the song about history’s most famous carpenter!

[@paulasbansode8799]

Nice work and Nice Jesus Christ song,👍

[@texasmadefella]

Is that the Porter Cable bandsaw if so is it good for resawing?

Trabalho espetacular parabéns 👏💯🤝👍

[@GeorgeIreton]

I think I noticed you set a board under the top when you used the scroll saw to cut the opening. Was that to achieve an angle so the phone would not set flat on the bottom? How thick was that board or what angle were you shooting for?

[@nemenciosantos9950]

Lots of powertools needed.however,very good workmanship.

[@dr.tracyy.summers4504]

i see you like hillsong worship

[@jsptraveler3001]

Why do you not make more videos?

[@owenevers389]

Do you have the full dimensions of all the parts anywhere?

[@codeykwizera7945]

Hi Im doing a school project for design what type of wood did use for the speaker pls answer thank you.

[@adrianchrostowski3613]

That sound channel looked terrible. Did you do any measurements or just guessed how it should look like?

[@dkayiralte752]

Gud job.. I've just make one..

[@jorgereyna7622]

Nice Jon Joe much?

[@joaobastistafereira45]

show amigo

[@slyabing]

Размеры рассчитывал или « от балды»?

[@richardrodgers1883]

My Samsung phone has the speaker on the top, how do I make this work for it without putting my phone in upside-down?

[@margotgupta5435]

Very nice and simple to Duplikate Design indeed. Well done. What about Dimensions (L vs. W)? I presume it is the golden ratio between the length and the width ( L x W) of the Box, with length (L) being approximately 12 Inches. Right?

[@alejandrocaceres702]

Buen trabajo, pero para algunos y mayoría que somos principiantes, nadie creo que tenga la maquinaria de avanzada que usted muestra, deberían mostrar y enseñar con herramientas más simples y básicas...

[@_Epictetus_]

What are you're dimensions?

[@LemarinelNet]

Woodworking is just about high-pitch noise :)

[@moreniurnice1848]

Como artesanía esta buenísima, pero prefiero conectarle una bocina portátil.

[@bobbby303]

Nice looking amp. Fast speed videos are a bit much for my old eyes to follow. Explaining the key steps and giving measurements at normal speed would have been better I think. I got dizzy watching this thing. Too bad because it's a nice looking project!

[@tslnox]

You can tap on the three dots (or the gear on PC, I think) and adjust the playback speed to lower.

[@rod1148]

Speaker looks great but I gave up the idea of building one when I saw your planer, jointer, and band saw as I have none of those. But thanks for posting anyway.

[@paulshrove9901]

There's a much easier design. I've used 1x lumber and 1/2 inch square stock. A handsaw to cut. A drill to cut the hole for the phone. Glue and clamps. I've made 2 and about to start a third.

[@alfredoantoniotolaba5340]

Podrían pasar medidas todo muy lindo pero tengo que adivinar las medidas

[@joaopaulobrito7931]

Legal

[@boza5306]

d-e-b-i-l-n-í

[@josecarlosrodriguezbanda7155]

Hello, Im from México, I am also a Christian

[@lourdesmartins3060]

Show

[@cheryljameson3088]

Narration would have helped, as well as a list of materials and measurements.

[@armandoquiquesanchez3691]

12 x 6

[@savedfaves]

If the hole was a bit less wide you've get maybe 30% more volume.

[@alham__aa]

Can't we make one of these using cardboard or something similar?

[@paulshrove9901]

After seeing some of these built, I used cardboard and duck tape to build a prototype, just to see how it works. Worked well enough, I made one out of 1/8 paneling and 1/2 square stock. That worked out,so I've moved on to what's called one by lumber. It's actually more like 5/8 thick. Using thicker wood seemed to have a better sound. So my next one will be with some hardwood.

[@alham__aa]

@@paulshrove9901 will give a try

[@propagandatelashow]

SHOW

[@nestormackno2897]

Salut...! Tout ce travail pour écouter de la Soupe Industrielle...!? 😳

[@leogitelson5561]

I just love watching someone cutting timber over and over and over .......ad Infinium. How about some commentary and shortening the repetitive sequences?

[@carlosrgamarraarellano5415]

No se escucha nada bien..,..tanto trabajo para eso!!??

[@putsomesugaronme]

zero details ?????????

[@bofeloevansgoetswang9471]

I really lie it WOW!!!!!!

[@0flu31of8]

Boşuna uğraşmış ses aynı

[@mypersonalmusic482]

Like for Jesus

[@crazyjacobins305]

I so completely HATE the time lapse crap!