Making of valve seat cutting machine - The Spindle

[@user-gn5tb9zx4k]

Бразер просто супер. Ты сейчас спас жизнь как минимум всем гаражным мотористам!))

[@user-gn5tb9zx4k]

Просто огромный респект за без ценный инструмент!

[@conservative-proud]

Your work and your skills are nothing short of amazing ! I love your level of perfection !!

[@johngoode6787]

I'm absolutely gobsmacked. I thought you bought this not made it. Your a genius Paul !!

[@edt21]

Awesome job, well thought and ridiculously well built, just beautiful !

[@ellieprice3396]

I usually don't watch videos without narration but this one hooked me. Still don't understand much about it but the detail and precision of construction is fascinating to watch.

[@PaulXchannel]

Thanks for watching

[@warneymotos]

Olá !! Onde posso comprar está ferramenta completa ?

[@nickkiofetzis5667]

i love your work paul, that's the most impressive machine i have ever seen made

[@igorengineer]

Доброго времени суток. Спасибо вам за ваше видео. Вы помогли мне в проектировании моего станочка. Я изготовил по другому проекту, но вы мне помогли, дали правильное направление в разработке моего проекта. Огромное вам спасибо.

[@nicolademacor8476]

Complimenti! Hai costruito una macchina che non ha niente da invidiare a quelle professionali dei marchi migliori BRAVISSIMO!

[@ashtechltd]

My god I thought it was a Mira VGX21 or serdi micro magnet you adapted.... but to make this from scratch, that’s some achievement. Respect to you 👌🏼

[@atcmadness4351]

You're amazing, I can do allot but I dream to be ble to do all that you can. Takes so long, so much time, space, money, machinery, practice, I get better all the time but you sir are a MASTER of the craft!! Much lovbe from the USA...

[@h-j.k.8971]

Ten years ago I would have been your first customer, back then I bought a manual Hunger maschine. Greate stuff.

[@СергейЯ-з9м]

Респект и уважуха. Особенно порадовали подшипники - 3ГПЗ. Саратовские.

[@dsadzaglishvili]

УГУ

[@zaran101]

Лучше поменять на скф как минимум, 90% отечественных подшипников - Китай перемаркироваваный. Нормальные только с военной приемкой

[@Antoha_Sol]

Отличный станок получился. Только я не понял, как устроена пневматическая фиксация шпинделя. Чем зажимаются полу кольца подшипника?

[@Cys62]

Gosh, you are really good with your hands. I used to learn how to operate the lathe machines from my granddad, but i know, i m maybe only 1/20th of your skill maybe a lot less. I know my belated granddad would be extremely envy of all the tools you have... he would definitely be extremely excited to just look at all these machines.. I used to work the crankshaft polishing machine for him too.

[@PaulXchannel]

Thank you very much.

[@juniormotosba]

Paulo show de conhecimento essa ferramenta é útil pra minha área, vc gastou quanto pra fazer aí? Mostre mais detalhes e explicação do material que vc usou por favor Deus abençoe sua vida sempre

[@charlesdefrancisco5056]

So that’s quite a tease..I had race engine shop in the muscle car era and in fact held several speed records in drag racing with oval track dirt and asphalt moving on to unlimited off shore....but everyone gets their fifteen minutes of fame....I probably did three angle valve seats than avg person takes breaths and was very successful with a rigid procedure and accurate keel way equipment.....your machine is so very nice and only one better that is for sale would be in my opinion a Newell one point system...it’s very cool and accurate..but it’s about $49-50 thousand which is a lot of valve jobs.. But again you are quite the craftsman .

[@PaulXchannel]

Ok

[@TUNDRA54BIYS]

👍 Похож на ротлер. Только там на пневме, башня двигается. А в целом похожая констукцыя использовалась в сороковых годах.

[@HOOK-cl3mf]

PAUL очень красивая работа. А можно узнать стоимость станка для резки седла клапана и можно у вас купить?????? Сколько будет стоить. Если нет то можно чертежи купить, сколько будут стоить??????????

[@gerjan676]

hello paul, love the design of the machine as well as how you created it, do you maybe have a source for the air brake spindle? couldnt really find a detailed expalantion in the comments, thank you!

[@maxwellleckie960]

It used air to compress two halves of a spherical bearing. When compressed, the halves press on the bearing, clamping it in place. It is built with rubber rings placed between the caps and halves. These rings act as the "pistons". There is about a second of footage of installation. The hissing comes from the bypass, as it releases air so the brakes are released.

[@MsKonstantin65]

Интересно и познавательно. Хочу повторить. Только теперь возникли вопросы к автору. К машинке подходит два шланга. В одном давление в другом вакуум или как??? Не понятно что подкладывалось под крышку шарнирного соединения 3гпз ( ш/с получается ссср или россия) . Подскажите его марку. Черного цвета это просто уплотнительная резинка или какая-то специальная камера? С другой стороны такая же или нет? Как происходит ослабление зажима шара и как он зажимается?

[@АлексейБакланов-д6у]

Как зажать я написал выше, а как он добился лёгкого плавания я тоже не понял.

[@ПавелГаврилов-р4ы]

Здравствуйте крутой станок в итоге а можно чертёж? такой же хочу сделать!!!🤩🤩🤩🤩

[@mrwolsy3696]

Superb, a toolmaking background is self evident.

[@pemsalvan2464]

You made a machine to fix machines... god level skills 👊😎

[@jeffnabors833]

Beautiful as well as functional. You are a true artist.

[@DenTuning]

а откуда ты? Где вял Российский подшипник??))

[@serjaly]

Он из Словакии.

[@claytonreed7489]

I love that you created this machine, how could one get this machine or the information to build one, I very much need a seat cutter like this and it would work for the cylinder head work I would do.

[@СергейКобылин-щ7ф]

3гпз это саратовский подшипниковый завод, Пол где вы его взяли?

[@rigato97]

Did you make the robocop hands? 🤔... Ha,ha,ha..what a master piece.., very inspiring, 👍everything is so detailed and smooth... Thanks bro.

[@denishent8744]

Hi, awesome job, really, huge respect. I have build a couple CNC machines, so i believe i would manage to build it by myself, but i have no time to create a drawing. Would you maybe sell the cad drawing and list all parts needed for the build? Best regards!

[@СергейЗагоруйко-н1я]

Очень круто! 👍

[@warneymotos]

Preciso dessa fresa, você tem para vender onde ?

[@IvanA-k7i]

Отличная работа👍

[@kotborka]

Чего? 3-й ГПЗ))!Где ты их достал вообще?

[@НиколайБочевар]

Oh, I get that.How does the mechanism itself work,how does the air pass, the direction?You have two air outlets.One on top and one on the bottom.On top of the faceplate with a groove,on the bottom without.Rubber rings at the top and bottom.What is the direction of the air? Does the tool lock when there is no air? Due to the elasticity of the rubber rings?If it's all a secret, I won't be offended.I like your attitude to work and the cleanliness of the workplace.And your refusal will not change my attitude towards the Master.Thank you very much!

[@PaulXchannel]

the diverter valve in the cabinet directs the air

[@johnjohannemann1220]

I love what you do and was very surprised you would utilize a pair of old channel locks on a double net instead of utilizing the proper spanner wrench. If you did not have one you could make one very easily. Your creativity at times can be mine blowing. I am not nitpicking here. Just offering my own opinion.

[@PaulXchannel]

We each have different software ;)

[@BeauA.]

Awesome build. Do you have a source for the Spherical Plain Bearing?

[@stefantd9296]

Congratulations, it looks very good ..! I see a potential problem! I don't see the steel parts hardening. Some time ago I also made such a machine, after a few months of work the thread of the feed nut wears out and it started to tremble during cutting. And congratulations again, it looks great, like for a photo!

[@PaulXchannel]

Thanks for watching.

[@JMB676]

Wow ur a true craftsman at a true top of the food chain very impressive to watch ty for content

[@PaulXchannel]

Thanks for watching.

[@evGEN1]

@@PaulXchannel Hello. Excellent result of the work, I admire you. Can you share the drawings for your invention? Thank you. [e-mail]

[@evGEN1]

[e-mail]

[@PaulXchannel]

Thanks for watching. Just this video.

[@anhhuynh5219]

Hey Paul, it's quite a home-made precise machine that you have made, a very genius & doable state-of-art gadget, like it !

[@mohammadsohaib5748]

hi dear you use seals for air brake

[@mattjonesturbo1]

I love the attention to detail from a machinist standpoint.

[@PaulXchannel]

Thanks

[@กิตติชัยศรีแก้ว]

เครื่องมือชิ้นนี้คุนผลิตขายไหม

[@whizzo94]

Are the bearing that you used in the spindle angular contact?

[@turdledive927]

So I'm watching this, I'm so confused on how the air brake works. Does the air separate springs? Or does it force the bearing closed?

[@gerry343]

A very impressive machine- it looks like a commercial product.

[@PaulXchannel]

Thanks

[@НиколайБочевар]

Paul, good evening.Please tell me, do you have metal spacers (rings) between the rubber rings and the hinge bearing?And the air you have is supplied from both sides at once from above and from below? And the tool is fixed by turning off the air and clamping the rubber rings? Thank you for taking the time to communicate with us.

[@IanOberhotlzer]

wow you are very clever and talented, I love this machine

[@ЗаконопослушныйГражданин-э5ы]

Какой диаметр у магнита?

[@carloscanaybatalla4438]

hola una muy buena maquina se podria saber las medidas muchas gracias

[@bb21again.67]

Yes !!!!!! a machine that can cut 4 valve/cylinder seats unlike the very expensive Serdi, however the rubbing noise indicates tool "chatter".

[@hamzabouaziz1583]

Man!!! 19minutes passed like 5 Impressive

[@НиколайБочевар]

I have a similar homemade device.But I fix the tool with a nut.I really want to do it like you do.In any case, thank you for the videos and attention to subscribers.

[@antonioseclen.t7562]

Buen Trabajo ..Tiene costo la maquina y si se puede enviar a Perú..Gracias.👍

[@ВадимРуденко-щ7д]

Здравствуйте. Подскажите пожалуйста как сделан пневмо подпор и зажим шпинделя 9:39

[@WrenchHead]

Where can the cutter head be obtained?

[@izakoliver]

Wow you are an incredible craftsman! Well done! Love your videos and keep up the good work! Cant wait for new videos 👌🏻

[@benhur3251]

Solid work good quality you are the champion paul,,

[@Melamotor]

iya adalah seorang insinyur👍👍👍

[@juniormotosba]

Paulo vc poderia fabricar e vender essa ferramenta eu queria uma dessa na minha oficina, pra vc fica fácil construí é só copiar e vender veja essa possibilidade abraço do Brasil

[@حسينهادي-ز1ص]

This deity is within my scope of work. Please tell me how much it costs

[@clevo351]

Paul how much runout on the seat?????

[@petealejandria5092]

Sir Paul X thanks to your video of your cutting machine designed just one question if you dont mind what size is the plastic tube and how much air pressure passing through...thanks again from Philippines.

[@pavelpekny92]

Super pomocnik chtel jsem se zeptat jak mate resene vymenezi axialni vulena tom vzduchovem "zamku"? Diky za odpoved :-)

[@serjaly]

Paul, please tell, how work air brake🙏🏻 The air supply to the top washer through the annular piston presses on half of the outer ring of the bearing, right?

[@PaulXchannel]

Yes

[@serjaly]

@@PaulXchannel Please answer one more question. How is such easy sliding of the spindle and lower ring along the body of the lower cover achieved? Air supply and air cushion, or some other solution?

[@PaulXchannel]

air supply and air cushion

[@serjaly]

@@PaulXchannel thanks a lot🤝🏻😉

[@pascalsimons8528]

And why didn't you put a ball thrust bearing on top if I may ask.

[@mundodanivea9380]

excellent job, i would like to know how i do it and if i would be able to acquire this project

[@oldschool1993]

Got your spanner nuts on backwards. the bevel goes against the the part to be sure of good contact and no burrs interfering .

[@johnryan2193]

Love to see this kind of genius metalworking !

[@PaulXchannel]

Thanks for watching.

[@countryboysteve]

This is super cool that you made it but why make a near identical copy of a commercial available machine.

[@vilasengineering43]

Only spherical bearing video create. I don't clear how lock the spindle air

[@F16spec]

Do you mean air bearing? It's just using a cushion of air. It's used in aviation and helps in a turbine that the shaft turns over 10k plus rpm for environmental system (cooling and heating).

[@markphilipsantamaria8790]

Always amaze or your work paul..no.1🙌🙌

[@هشامالعلي-خ8م]

Good job how can I get one it's great

[@redmountains6516]

Супер золотые руки!

[@motoretificawaguinho]

bom dia qual valor desta maquina por favor?

[@jirawad]

Thanks for the Smooth VID. Pleasure to watch trough.👌

[@igorengineer]

Cool. I repair engines and make tools myself. I made myself a machine for grooving valve seats, it didn't work out as nicely as yours, but it works. But you are a real designer. Like definitely.

[@PaulXchannel]

Thanks

[@igorengineer]

@@PaulXchannel Hello, I made myself a tool for boring valve seats. I have a video of this machine on KZbin. Can you advise on how to improve it? This is my project. Here is the link to this video

[@igorengineer]

@@PaulXchannel kzbin.info/www/bejne/poK1dXeOZrp8mqs

[@igorengineer]

Good day. Your video was very helpful in making my new machine. I understand how your air cushion and air brake work. I am thinking of redesigning my machine. Thank. You helped me with the design.

[@juniormotosba]

@@igorengineer e teria como vc explicar ou mostrar a sua como funciona ou o que vc usou na sua máquina?

[@darkovasiljevic7670]

Are u intrested to sell all plans for that mashin???

[@shirothehero0609]

You do the anodising in shop or did you send the parts out? Frickin awesome build!

[@PaulXchannel]

Thanks. Anodized in a specialized company.

[@ГаражСтраныСоветов]

3ГПЗ!)) Уважаю!))))

[@Villa7]

Where you from sir,,,,you very² geniuse and creative,,,,you work tools very nice and awosome

[@PaulXchannel]

Thanks for watching.

[@kk-xn5pp]

genius and recklessness ... this you are🔝🔝🔝🔝

[@jimiandrix]

Impressive, im mindblown. How does the air break works on the spherical bearing ? I cant seem to understand..

[@tansangphan5849]

Cái Phot đó hiệu gì cho em biết được không anh

[@sega702]

Any chance these machines are for sale in the US ? @Paul X

[@arcesiofalla5460]

Cómo se adquiere Pará que la envíen a Colombia Sur América y cuánto cuesta más información porfavor gracias

[@AbR1e0]

Hello. Is it possible to get detailed drawings with dimensions for the manufacture of such a device?

[@PaulXchannel]

Hi. Only this video.

[@manuelkneuttinger1795]

Was ich noch nicht verstanden habe: Wie funktioniert die Zustellung beim Schneiden? Grüße

[@PaulXchannel]

Zeit 15:18

[@murzul]

3гпз это Саратов?

[@romicateodosie7539]

Is it possible to order the manufacture of such a device with the workbench from you. anticipated thanks for the answer.

[@PaulXchannel]

Thank you for your interest. I don't sell.

[@craigjarvis9677]

Awesome engineering. Well done sir 👍

[@chrisstephens6673]

Ill second that!👍

[@Nobody-ld7mk]

Nice but hard to compete cost wise with the Neway Cutter System.

[@IanOberhotlzer]

Can you make a video going over all the tools functions and features in a complete video?

[@PaulXchannel]

Yes - Here kzbin.info/www/bejne/j5C1eYF4pq51r9k

[@warlockwolf999777]

Привет!Все понятно,кроме подвода воздуха к сфере и её фиксации,я так понимаю сферу поднимает воздух,но как он подведен к ней,не показано!Что за черные шайбы,на которые уложены опоры сферы?Можно ссылку на подробный вид этого узла,или может подобие с чего делали Вы?Спасибо!

[@warlockwolf999777]

Может быть нижнее кольцо дает подъем сферы,а верхнее кольцо подает воздух для фиксации сферы?

[@АлексейБакланов-д6у]

Очевидно это уплотнения применяемые в гидроцилиндрах. в крышках сделаны канавки в них и вставлены эти манжеты .

[@chronokoks]

Na nasinca (google toto slovo neprelozi) celkom pekne videa a hlavne dost dobra pracicka. Len tak dalej! Pan ma trpezlivost a skills!

[@bullvine2062]

True expert. Great videos.

[@PaulXchannel]

Thanks

[@tp4791]

Looks very good. Air brake idea cleverly thinked. Me too will made valve seat cutting machine, so you give many ideas, thanks. Which machine spindel you use?

[@PaulXchannel]

Thanks Star sst-16

[@ganjaradam7722]

Nice..did u sell that product?

[@dbriggs1689]

Expert level. Great job.

[@Dragon-cs2xz]

Where are you buy insert and tool?

[@rogerioalmeidadasilva6953]

friend how do you get this machine here in Brazil ?? what value ?? it's on sale ??