How To Replace Laptop LCD Screen - General Tutorial

[@PC_Monkey]

Thanks for watching! Please consider subscribing to my new channel here: www.youtube.com/@jamminpcs. I'm trying to move the easier hardware stuff there so that I can focus on the more in depth troubleshooting and diagnostic videos here :)

[@chalmers1288]

3 years later, you’re still helping others. Thank you so much! I think my LCD was just slightly unplugged so thanks again for this!

[@PC_Monkey]

Glad your all set :) Always here if needed !!

[@breathetyb8467]

Thanks so much for this video! My LCD was not working but when I took my laptop apart based on the instruction in your video, and blew some air around and wiggled the cables it started working properly again. Because of the video I had the confidence needed to start the repair!

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@tatendarumvura2619]

me too i was facing the same issue thanks so much very helpfull

[@prof_mctusson]

It's my first time doing hardware repairs and it was perfect following you. 😊

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@josifz1046]

This was a lifesaver, thank you!

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@josifz1046]

@@PC_Monkey who would have though it would be that easy 😂

[@PC_Monkey]

@@josifz1046 Sometimes it can be :) Those times are great !!

[@djbillygunn7992]

​@@PC_Monkey hp laptop black screen after it was a bright white with streams of colors

[@bhimasolberg4767]

Very good video! As an experienced desktop tech, I was very much aware that you thought of everything where a tech could make a simple mistake. Your warnings and suggestions on how things could be different, and the pitfalls of assuming that just because we have years of experience, to assume nothing and do your homework, Thank you very much.

[@PC_Monkey]

Thanks for the compliments :)

[@markkayhaston]

I don’t make comments on KZbin. But thank you sir. I don’t know much money you have saved me but I know it’s a lot. And I have learnt a lot too . I just removed and inserted it in and boom! Back to life

[@PC_Monkey]

Glad your all set :) Always here if needed !!

[@j.a.ward13]

Great content. You are a Godsend 🤲🏾 🙏🏾 Thank you PS - I am aware this is an older video, so this is some "Back to the Future" stuff right here. Thanks again

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@gofroggy]

My cable was abraded from rubbing the hinge bolt and failed. You took a lot of the pain out of this repair, thank you!

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@RideAcrossTheRiver]

Does that cause the screen to go incoherent, like flashing multi-colours? Mine even goes nuts when black images or backgrounds are on the screen.

[@nkululeko7381]

@@PC_Monkey Hey bro, my pc fell but not so hard and right now it turns on and I can see the screen is working but brightness is too low to a point where by I have to use direct light to see the content

[@PC_Monkey]

@@nkululeko7381 1. If the compute fell, its possible the LCD or the LCD Cable were made loose. I would think about going inside and making sure the LCD Cable is secure by unplugging it at both ends and then plugging it back in. 2. For a computer that turns on but the display does not work, try this video first; kzbin.info/www/bejne/m2rMqmZmf5VjY80 Let me know how that goes :)

[@olumideidowu7374]

@PC monkey, you just saved me some couple of bucks. I realized my LCD screen was not working, so with your guide, I discovered the LCD cable has pulled out. So I just had to reconnect it. Thank you

[@PC_Monkey]

Glad your all set :) Always here if needed !!

[@unknownsowhat6310]

YOU SAVE MY LIFEEEE, IVE BEEN TRYIN TO FIND OUT. OMG THANK GOODNESS

[@PC_Monkey]

Glad your all set :) Always here if needed !!

[@unknownsowhat6310]

@@PC_Monkey i subscribe u tho 🙏🙌

[@PC_Monkey]

@@unknownsowhat6310 THX :):):)

[@TheCrimson44]

I was lost at what to do. Didn't realize you had to lift the black clip until you showed me lol. Thank you

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@afsal802]

This guy deserves more subs... Love you my man...

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@MrAir-kv3rj]

You got my sub

[@onesounder]

THANK YOU, VERY HELPFUL. I HOPE I CAN GET THIS CABLE SOON SO I CAN TRY DOING IT ON MY OWN, RIGHT NOW MY LAPTOP IS CONNECTED TO A TV SCREEN.

[@PC_Monkey]

Happy to help :) Good luck !!

[@onesounder]

@@PC_Monkey Thank you so much, I did not buy a new cable. I just removed it and re-inserted it back on, Turned my laptop on and boom, My screen came back to life again.

[@PC_Monkey]

@@onesounder Very often, re-seating, parts helps as they do come loose sometimes :) Well done !!

[@streetfighter4119]

@@onesounder ekse my brother what was wrong with ur PC from the get go¤¤¤cz mine switches on nhe and the monitor also switches on but it only displays a blue blackish screen 😭😭

[@onesounder]

@@streetfighter4119 it had a black screen but was working when I turned it on with nothing displaying on screen.

[@wabbitoncrack]

Hey man, just wanted to say you are a godsend. Seriously helped me out. Thank you.

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@AphexTwinII]

Thanks, I had a blank screen issue on my HP. Removed the LCD and reseated the connector like you showed and that fixed it.

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@TruckLKWDriver]

I have to remove cable from lcd.. its works. Thank you!!!

[@PC_Monkey]

Glad your all set :):) Always here if needed !!

[@AanuoluwaToki]

This was sooooo helpful thank youuuuu😭

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@cranq2549]

Thank you so much.. This just helped me, and I don't have to take my laptop for repair. And from your other video, I've realized that it's possible the technician stole one of my drives, but it's alright. You're great

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@Senny_V]

Thanks a lot for this - My laptop started glitching after it fell and there were blue and yellow artifacts all over. Didn't even have to undo any cable, just pushed them all again and it worked. Couldn't have done it without this guide though

[@PC_Monkey]

Glad your all set !! Always here to help :)

[@fozatv214]

Thanks man your life saver!! My laptop fell down i thought display is dead and i try this now it's working thanks so much!!

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@jacobmolefivanwyk307]

thanks this helped a lot with my wifes acer switf 3 loose cable connection its up and running again display fully function thanks

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@thomascirignano]

I found your video very helpful. Thanks for posting it. Here's ANOTHER FIX to ad to the mix. My wife's laptop screen was flickering and going on and off with the least amount of movement of the screen. I figured it had to be a loose cable connection or a bad wire in the cable. While unfastening the screen, I left the screen running so I could see what made a difference as I touched things. The 2 bottom screws that hold the screen in were tight. THE 2 TOP SCREWS WERE LOOSE as could be. Just for the heck of it, I tried snugging those 2 screws up, and Voila!! The screen came on bright and consistently stayed on while moving it up and down!! It turned out to be a poor ground related to the 2 top screws! My wife is thrilled to have her computer up and running again.

[@PC_Monkey]

Nice work and thanks for the comment :)

[@EliteGoalDigger]

Thank you. Helped a lot.

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@lindawhitton9150]

Such a good video. I have never done anything like this in my life. Feeling very empowered right now and ordering a new ram! Thanks! Linda x

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@TheBeltwayBandits]

Love what your doing!!!

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@ashrakattarek1543]

Thank u very much i fixed my laptop using your help ❤️❤️❤️

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@vajihehomrani1724]

I don't know how to thank you♥️♥️ that helped sooo much

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@josephsilvia9549]

Cable loose on motherboard. Thanks for the great videos. PC Monkey the best!

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@Gothmilker]

hay my laptop doesn't have such bezels how do I access the LCD cable? It is a "Acer aspire V3"

[@d-rokcruise6671]

GREAT INFO THANK YOU

[@PC_Monkey]

Thanks !! Glad this video was helpful :):)

[@techieonline1568]

Do you made same video on any lenovo laptops?? If yes ,can you please provide the link

[@PC_Monkey]

This video shows how to replace an LCD in a Lenovo computer; kzbin.info/www/bejne/b3vXoKZma7ucrpI However, all models will have differences. What model do you have?

[@techieonline1568]

Thanks a lot🤩🤩

[@PC_Monkey]

@@techieonline1568 Your welcome !! Happy to help :)

[@agudar]

Thanks man! Helped a lot.

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@gmbdrty13]

Super helpful thanks man

[@PC_Monkey]

Your welcome !! Happy to help :)

[@Thisispow]

Very helpful! Thank you for the tips, liked!

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@piotrrostow]

Hi, that’s very good. In my Toshiba satellite the screen goes black off and on when I am moving the flap. So I think it’s just a cable, either lose or disconnecting. The idea of replacing the whole cable seems like too much… is it easy to buy a new one

[@PC_Monkey]

Yes, if your screen goes black when you move it, my first guess would be a lose LCD Cable. I would first try unplugging it and then plugging it back in at both ends. Its easy to buy a cable :) If you tell me the model Toshiba you have, I can see if I can find one. I usually use Ebay, Amazon, etc for computer parts

[@laurad9858]

Very helpful! Curious, how to know which needs replacing, the LCD screen or cable? On my laptop, for example, having screen issues (getting stripes or pale colors) when I adjust the angle. What's the easiest way to diagnose which is the culprit? Thanks in advance!

[@PC_Monkey]

Try the external monitor test as described here in this video. Do the stripes show up there too when you adjust the angle of the laptop monitor? Its most likely a loose or bad LCD Cable or a bad LCD. No way really to know which without replacing them one at a time.

[@andreaaerdna6308]

you saved my screen, many thanks!

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@johnh7784]

I didn't make out the name of the prise tool, is it a rare item? I have stayed with Desktops thus far! I liked the business approach as well thanks.

[@PC_Monkey]

Its just a small metal pry tool. There are a bunch of different kinds. The one I use is similar to this one; www.amazon.com/Spudger-Opening-Samsung-opening-Stainless/dp/B07CHDGTVD/ref=sr_1_16?crid=3IZEJ13FMIWPN&dchild=1&keywords=computer+metal+pry+tool&qid=1634928404&qsid=134-4931834-0468625&sprefix=computer+metal+pry+tool%2Caps%2C90&sr=8-16&sres=B074YHS3GW%2CB015CMAJVK%2CB012P07V0E%2CB07ZR9BQCK%2CB01F52ZPBQ%2CB014LR8CTS%2CB07X1M9M55%2CB06XNPRL42%2CB0741PYY6D%2CB07PB3PW53%2CB01HT1BW0E%2CB07CHDGTVD%2CB081PTCKY1%2CB06XHG3G33%2CB071LDN61H%2CB01GNZY5OM

[@kennydieu2694]

Great tutorial video very helpful . Thank you

[@PC_Monkey]

Your welcome !! Happy to help :)

[@Zeesh79]

It did help me alot. Thanks

[@PC_Monkey]

Your welcome !! Happy to help :)

[@DryingWall]

really straight forward tutorial. but i have some questions 1-my laptop is an acer a315-42 r772, and i cant locate any screws or stickers to remove the bezel 2-my laptop suddenly got all green and pink with vertical and some horizontal lines. do you have any idea how to solve this? or do i need to do the external monitor test?

[@PC_Monkey]

Does this help access the LCD? kzbin.info/www/bejne/d6OcgHqdYp6XrK8 Yes, I would try the external monitor and see what the display is like there

[@marilynresnera482]

What if the battery is built in? Should we still take it out inside the laptop? Or just let it there then replace the laptop screen?

[@DigitalEcho12]

Very helpful..thanks mam

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@randyschroeder1505]

You have the best repair videos I've seen...my Toshiba Satellite circa. 2007...I'm ready to attempt a black screen fix...the screen blacked out progressively upon angle, working fine but got closer and closer to closing....then no screen at all...seemed like hinge and LCD cable where problem lay?...no mentions of progressively losing screen in relation to angle it was opened...Do u think it's a cable issue?order new one by opening????

[@ostertaglau]

May I ask for help for my laptop screen problem? My laptop screen suddenly turn green and have ghost image left on it. It used to happen a year ago and it was fixed by replacing with a new display-panel. Before buying a new display-panel again, I am doubt that is the connecting cable be the root cause? Can the symptom tell the problem is from display-panel or connecting cable? Anyway, thanks for your videos! I learn a lot from them!

[@PC_Monkey]

1. Can you try hooking up to an external monitor? Does the issue continue there? 2. You can try unplugging your LCD Cable at both ends. Then plug them back in, taking care to insure they are correctly plugged in and secure.

[@josemadrazo3131]

Bro really thanks you so much for your videos! I have an issue that my laptop turns on but stay black the screen I tried what you said in the other videos but the issue is still there, but it’s weird cuz some days works and others don’t, and the same with the webcam, do you think is the cable or the lcd screen?

[@PC_Monkey]

For a computer that turns on but the display does not work, try this video first; kzbin.info/www/bejne/q161doOCmdWNbZI Let me know how that goes :)

[@whatsgoodhoodu]

Thanks for the video! If the LCD cable connector that connects to my motherboard is 40 pin, does that mean the one on the back of the panel is a 40 pin as well?

[@PC_Monkey]

Yes :)

[@konbak1876]

Super instruction thanks

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@jaz1715]

Hey, great video...MY laptop screen works well but ,in intervals....it works perfectly fine for a week, then the next day I turn it on ...it doesn't work...I tried every method possible to fix the issue and I don't feel comfortable to replace it if my screen is working but It rarely works sometimes. Tried unplugging the tape but I feel like I might mess up ....the cable is pretty entact...pls let me know if you any software related or hardware related tips to this problem.thx.

[@PC_Monkey]

The times when it does not work, have you tried the RAM test or the external monitor test as seen here?

[@jaz1715]

I have tried re attaching the ram .and it does work on an external monitor .

[@jaz1715]

@@PC_Monkey is the issue software related cuz it works perfectly fine on an external monitor but the laptop screen itself seems to be a problem

[@jaz1715]

@@PC_Monkey also when I boot up the computer with an external monitor it boots up with beep sounds but works without any problem

[@PC_Monkey]

@@jaz1715 If the screen is black, what are the signs the computer is on? Lights? Sounds? Fan?

[@cassandragrahams3076]

Thanks fam

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@DoutzReiley]

Hey I'm about to perform this with our laptop, just needed some clarification if swapping out the cables will help solve this problem ? Thanks a bunch!

[@DoutzReiley]

I actually meant to switch the cable heads, hopefully that clears it

[@education_studies8868]

I have an Acer 17inch Laptop with a broken LCD screen that does no more start an external monitor., I'd like to exchange the internal monitor that is broken.

[@education_studies8868]

Sorry, the model name is Acer Aspire V3-571G

[@PC_Monkey]

You wish to find a new external monitor? Are you asking for a recommendation?

[@1851-i9w]

Thanks for the video. From an newer Insignia LCD digital television I removed the LCD, to test it plugged it in again and it worked. Because I’m making a no-backlight LCD, so the screen is more transparent as done on another KZbin video I peeled off the filter, held it up to the light and I don’t see any screen cracks. I was extremely careful to make sure the LCD cable wires were not damaged. The monitor power indicator goes on but the LCD doesn't show any image when I turn it on now. Do you know what I may have done? May I please know if my TV Insignia LCD is broken since I removed the monitor cable but the thin metal fastener clip housing on the outside of the cable outlet on the LCD bus strip fell off that the monitor cable plug pin-strip plugs into on the LCD bus strip cable outlet? Is it possible if the television electronic circuit board is screwed back in with other screws from the assembly that fit for some electronic reason something will not work quite right?

[@hatemkhrouf8955]

If only I watched this before trying to install a new display... I unfortunately pulled too hard and some wires came out of the connector. I think I should buy a new display cable right? Or do you reckon the connector can be repaired? And by any chance, would you happen to know of 3rd party sellers for a display cable for the HP Elitebook 830 G8? HP sells them for £110...

[@PC_Monkey]

Yes, if you pulled the wires out of the plug in the LCD cable, it most likely needs to be replaced. I usually get my parts on sites like Ebay, Amazon, etc. Would you like help locating one?

[@Garlet05]

Hey I love your video, I do have a question I hope you can help me. I'm trying to replace the display cable on my laptop. How would I go about getting anther wire, I already found the model number on the display (nv173fhm-n44 ), is it I need to find the right pin count or is there an exact wire based on the display? Thank you in advance

[@PC_Monkey]

I usually get my parts on sites like Ebay, Amazon, etc. You can usually just search for your brand, model number, and 'lcd cable'. Thats usually enough to get the correct part. Just make sure visually that its the same before purchasing it :)

[@carapompilla]

Wow, I can't believe it, it's my computer and I have this problem of conexion. I think I will try to fix it. The cable is not working properly because is to tight and the screen images trembles till I move a litle. Thanks a lot for the tutorial.

[@PC_Monkey]

Your welcome !! Happy to help :)

[@SuperPetiChat]

You made me fix my laptop. Thanks a lot

[@PC_Monkey]

Great to hear !! Always here to help :):)

[@Sher-sher89]

can i replace display cable without thermal tape ? what happens if i don’t use thermal tape? thank 🙏

[@PC_Monkey]

Does your current cable plug in with the assistance of thermal tape? If so, its best to use it. However, its not absolutely necessary. The computer will still work without it :)

[@lionelward1762]

Excellent video!! Will be using this to replace an LCD cable shortly. A bit scary, wish me luck ;)

[@PC_Monkey]

Good luck !!

[@parsaKh-un9vy]

hello ..thanks for the video; it was helpful i have problem with my laptop lcd and i dont know what can i do for it or how! there are some lines in the lcd and a gray background without any image; sometimes when i move the lcd, i have my desktop but it will disappear quickly! should i open my laptop or what can i do ?😞🥺 actually i want to know what is going on before i take it to a repairman ...

[@PC_Monkey]

Not sure if I understand your issue correctly. For a computer that turns on but the display does not work, try this video first; kzbin.info/www/bejne/q161doOCmdWNbZI Let me know how that goes :)

[@fataheyable]

Hi. Thanks for the clear instructions. However I just dropped my laptop and everything works fine except the screen is dark. I am writing this massage on an external monitor and everything is clear on the external monitor. So do you think it is a screen issue or cable. Mind you the screen has 2 small cracks due to the fall.

[@PC_Monkey]

Yes, if an external monitor works well, it means there is nothing wrong with the signal coming from the motherboard. Only an issue with either the LCD or the LCD Cable. Try unplugging the cable at both ends and plugging back in. Perhaps its just loose. If thats not it, one or both may be bad. Most likely the LCD if you just dropped it :(

[@dharmajyoti2792]

Hi, Thank You for the guidance. I have a lenovo IdeaPad Y700 It fell of little bit while taking it out of my cupboard. Not severely. It was working before this incident perfectly. Laptop works, it also works on another monitor. Screen looks perfect. So I think the problem is either with LCD cable connection in LCD or motherboard which probably became loose or something might have broken. Could you guide on checks ? And also give a general idea on expense ? 1. If it only disconnected 2. If there is something broken ( what could it be ? ) And how much it should cost? Is there any thing else that might be a reason eg some light bulb or anything? I may not do everything myself as I never opened a laptop before ( am nervous ) but I don't want to get cheated. So want to know a fair cost of repairs in either case. And exact steps so other portions remain untouched.

[@PC_Monkey]

If its working with an external monitor, then its most likely an LCD or LCD Cable issue. I would try reseating the cable from both ends first. If that does not help, replace them one at a time depending on the cost and ease of replacing each. What size is your computer screen?

[@lawalmuazu9160]

Thank you so much sir

[@PC_Monkey]

Your welcome !! Happy to help :)

[@romgeldiaz5096]

Thank u for sharing

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@MM-sz8hx]

Hello this is a late comment i hope you can reply. My laptop is the hp omen 17 inch so i am having problems with the screen. So the perfect way to explain it is now it's showing as a broken hdmi connected to the tv like the lines and all that. I don't know if it is a wire problem or the lcd screen itself please can you tell me how to differentiate or if I have to open it up. Thank you

[@PC_Monkey]

Without specialized equipment, its very difficult to tell if its an issue with the LCD Cable or the LCD itself. Most people would simply replace them one at a time to see which one it is. Many sellers on sites like Ebay, Amazon, etc offer free returns for any reason so you can always return the one that you dont need if you get both and only need one

[@merteker1248]

I have a Asus FX503vd. While the computer is running the left side of the screen turns pale almost white and when I touch it from the back it turns good again. I guess the problem is the cable that you mention here and it became somehow loose. But are these cables standard, or do any company has its own type of cable? Thanks for the video!

[@PC_Monkey]

Is this your cable? www.ebay.com/itm/254819224560?_trkparms=ispr%3D1&hash=item3b5468cbf0:g:xG0AAOSwoZFgGOXb&amdata=enc%3AAQAGAAACoPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsSg3Ye8yTWgOW7pmE1t838dlkO454JqL4P7a5YYZ5drGoGLoL4JiISWvWx%252BCjADfhU00vm%252BVISprBiDvzOT%252BTBPtRH5ygioDY3GtpBSXfoRz4X%252FrGccLLeZbqVlLJUcb7r%252FdYkCBMpAAtcV3eTcKuGSYX%252BUemqFxm2lt4CFKuVvlCuGcnISDbb4%252FI0Z8M6S1ll9ajNb0SjtJs9KbCAgviD9jUogv5wR655cM%252FMOdyB89GagbtJyC7dVqU3%252BAF0s7qwP9YgrsANUmi6n10%252FUeQNfj9E%252Fmjz0xWCnKRULxXcqq%252FKB9tngWCQp63J2Qa%252FlTFXX1hMlK%252BoyLGG%252Bsj0diu3THYziXzlHmzfYNTJKm4Ef4wiiPNUrLipb1BP3B3zzkW0W3Cx05fVODvrIl6y0qvT3uzv1KzpzqOPkq3ddkmRiAOlrKHK5vJeX8m9dyZk%252FJyZ8g6w5iDyHKAozx6Yaelr02U55oQ0tUMJWorNsftnS80D0CNmaV7khbvnXtdyCWVtLg1eKfm%252F7No5CQLRDZt7ptQfZj10mo6jxdvrVnHpHkXUGXdDK%252Bacy%252FeFJ82vjIQeNWKIxf%252BT56DcFqANjmfmLosTq3%252BoVHznzlHe2FAGBcAuEGvfvpmyNPyvLvFdnhTbY1Dw4gLhctqyJ19WsEb1Fe8ahvuRm1pavEPzzMuUgSdriAk9liFNcAeI0VrDrJUNMebn90h9GmyqSA3T6MKp1M7DikmTvoITB60sH8uvB6XGfZX%252F7BS7%252FMScJT9Hzt%252BQj1SUDizIfifIf413w8igp9RW%252FfE7AJVELy71XpJMhAzAHfkFlO4JxV0FRFOM2zqwIfWnLfnxY9YKfY%252FafNw3GA%253D%253D%7Cclp%3A2334524%7Ctkp%3ABFBMpLvd-Zdf

[@stressed.jennifer]

Hi! Thank you do much for this video, my laptop turns on, i Can see the letters on the screen but its just toooo daaark i can’t see much but They’re distinguishable so the lcd works? Also when I connect to a tv or monitor it works perfectly do you think it might be the lcd cable too? My computer is a es1512 acer 🥺 little oldie

[@PC_Monkey]

Yes, it could be the LCD or the LCD Cable. I would try unplugging the cable at both ends and then plugging it back in, making sure its not just loose. If that does not help, one of them may be bad. I would replace the LCD and the LCD Cable one at a time until I found the bad one.

[@sarforo5465]

Good video. When I turn on my computer, some times the screen comes right away, other times too it doesn't. Unless I try to touch where the LCD cable passes before it comes and even that it goes off and on. Is the lcd cable damaged or when could be the problem? Thank you

[@PC_Monkey]

For a computer that turns on but the display does not work, try this video first; kzbin.info/www/bejne/q161doOCmdWNbZI Let me know how that goes :)

[@juankruger2598]

1st, that was an informative video, very well presented. I have an Asus X543UA. My screen still has power, but no image at all. Mostly black, but there are white strips across the screen (mostly at the top). I'm assuming that the cable needs to be replaced or maybe even just secured back in place 🤞 Any model specific tips and/or advice is needed & would be a life-saver. Even if your advice is to tell me to take it in to a technician for repairs

[@PC_Monkey]

Hopefully this helps access the LCD and LCD Cable; kzbin.info/www/bejne/iKjbioBsn9eMq9k Are you able to hook up to an external monitor to see if the issue is there as well?

[@juankruger2598]

@@PC_Monkey External monitor works. I've been using that in the mean time

[@PC_Monkey]

@@juankruger2598 That would usually indicate that the issue is with your LCD Cable or the LCD itself. I would try to 'reseat' the cable at both ends. If that does not help, replace the LCD and the LCD Cable one-at-a-time until you find the one that is bad.

[@AW.creator]

How much should a simple LCD replacement/loose connection cost to repair from a shop?

[@PC_Monkey]

Depends where you live and what they have to do in order to fix it. Some shops will charge a diagnostic fee to find out what is wrong. At my shop on East coast America, I charge $45 for that. However, I wave that fee if they fix the computer with me. I would then charge $75 per repair plus parts.

[@Lenyxx3]

Will this help HP touchscreen laptops? The hinges broke, we replaced them and now we have the black screen but computers runs. Trying to connect with hdmi to another monitor to check too. Thank you for your videos.

[@PC_Monkey]

Did the screen work well before you replaced the hinges? If so, its possible something is lose or damaged. What was the result of the external monitor test?

[@Lenyxx3]

@@PC_Monkey the screen worked before the hinges were changed. I think we figured it out with your help. Bless you.

[@PC_Monkey]

@@Lenyxx3 Glad your all set :):) Always here if needed !!

[@brandinicole8134]

..long story short Hinge on my laptop broke and punctured this screen/lcd wire. 2 of the (TINIEST I've ever seen) wires are sliced. Would it be 'safe' to try splicing them? P.s. you explain things wonderfully. So glad to find you! ☆new subscriber•

[@PC_Monkey]

No. I wouldnt do that. For the cost of a new LCD cable, I would rather just replaced it

[@amey6724]

Thanks for the video, having lcd issue with my Asus TUF FX504GD, the display works on an external monitor and the laptop screen flickers (but no display, I can see backlight). So can you let me know if my lcd is damaged or the cable?

[@PC_Monkey]

If the computer displays fine to an external monitor but wont to its own LCD then yes, your most likely looking at a bad LCD and / or LCD Cable. I would first try to 'reseat' the cable at both ends. If that does not help, replace them one at a time till you find the one that has the issue

[@danielantonym2935]

Hi, thanks for your video. Can I know where can I buy screen online for my Dell Inspiron 15, 3000 series?

[@PC_Monkey]

I usually get most of my parts on sites like Ebay, Amazon, etc. If you need help locating one, let me know :)

[@RealForPeteSake]

So what if i broke my screen, (it fell, not sure height) bought a replacement, installed the replacement but im getting a black screen? I have the laptop hooked up to my TV and its displaying. Should i go back in and reconnect the cable to the screen? How do i know if the screen is working when i play around with the cable? I cant leave the laptop on. Have to start up and shut down each time? Or leave connected to TV and duplicate display?

[@Casinoslotguy]

Great video! I fix a lot of laptops with minor issues and or just need screens replaced. But i have an odd one that maybe you'd be able to shed some light on. I have a Toshia P55w-B5112, which the screen is black but the touchscreen still works when connected to an external monitor. I checked the RAM, and because this PC doesn't have a separate CMOS battery (it's built into the main battery) i disconnected the main battery and still no love. I checked the connection of the video cable to the motherboard which is good. I haven't checked the connection on the back of the monitor yet, because it looks like its going to be a bear, and before i move forward with that figured i would see what you thought. Any insight you can provide is greatly appreciated...Thanks

[@PC_Monkey]

The external monitor shows the display fine and the touch screen even worked on it?

[@Casinoslotguy]

@@PC_Monkey I know that sounded a bit confusing. The laptop monitor is black (nothing appears). I connected a external monitor to the laptop and i can see the image perfectly. If i touch the laptop screen the touchscreen works because whatever i select opens or closes on the external monitor. I just dont get anything on the actual laptop screen. Hope that makes sense.

[@PC_Monkey]

@@Casinoslotguy Sounds like the LCD on the laptop is dead and needs to be replaced. Sounds like motherboard and touch screen is fine. That would leave the LCD itself

[@Casinoslotguy]

@@PC_Monkey I think your right, thanks for the help

[@PC_Monkey]

@@Casinoslotguy np :) happy to help! Good luck !

[@ivarn81]

Very informative on every step. On the bottom of my screen there is some blurly blinking, how can i know if its the LDC or cable problem? Thanx in advance.

[@PC_Monkey]

Try plugging the computer in to an external monitor. The the problem persist there?

[@ivarn81]

@@PC_Monkey never tought about it, thanx bro!

[@jimmyakande2905]

@@PC_Monkey I have the same problem. The problem doesn't persist on an external monitor. Does this mean its the LCD cable or the LCD itself.

[@PC_Monkey]

@@jimmyakande2905 Ya, if the computer displays to an external monitor but not to its own LCD, your most likely looking at a bad LCD or LCD Cable. I would try 'reseating' the cable at both ends first. If that does not help, replace them one at a time until you find the issue :)

[@baberuthdabatos7421]

Fantastic

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@Duppi]

Hi. Great vid. I have a Fujitsu A544 and had an accident with the screen .I threw a pen at the screen which resulted in half the screen working and the other half not. Worked through the TV fine with HDMI. Reseated the LCD cable to the screen and when I turned it on went immediately white.. Now the screen is just blank but still works through the TV and still won't come on. Was this a power thing? Would you replace the screen?

[@PC_Monkey]

Yes, I would replace the screen at this point :)

[@Duppi]

Thanks.

[@PC_Monkey]

@@Duppi Good luck !! Let me know how it goes :)

[@Duppi]

Managed to get it up and running ...Thanx

[@PC_Monkey]

@@Duppi Glad your all set :):) Always here if needed !!

[@Wesdag]

Hi, great video. I have a Lenovo Ideapad 330. Every time I adjust the lid, the screen goes black but then comes back on after a lot of re-adjusting. Does this sound most likely to be the LCD cable whether loose or in need of replacing?

[@PC_Monkey]

Yes. I would assume the cable is loose. Try reseating it from both ends first. If that fails, try replacing it.

[@pchebbi]

Methodical instructions. Thank you! Please provide similar demo for Dell 5558 laptop. Want to check LCD cable connection on either end.

[@PC_Monkey]

I dont have one on that specific model but I found this video that may help; kzbin.info/www/bejne/rpSci5Vtf5lqd80

[@Tilly1001]

Very good video. Thank you for your help

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@zeldasharpe131]

I am currently rebuilding a Toshiba Satellite L350D. Can you show how to get to the LCD cable to put a new o ne in please? This surround looks pretty solid.

[@PC_Monkey]

I found this I hope helps: kzbin.info/www/bejne/ZqG4nmhueJaMq7s

[@zeldasharpe131]

@@PC_Monkey Hi, thank you for finding the video. It has helped with the rebuild.

[@ElseNoOone]

hi i don't know how i can fix my sister Samsung Notebook 7 spin NP740U5L hinge and new LCD cable!! you are really amazing thank you 🌹😘

[@PC_Monkey]

Happy to help :) Always here if needed !! Nice job !!

[@christjesus5824]

My screen has like green lines and when the screen if turned off you can see darker spots on the screen, does changing the lcd cable help with this or do I need to buy a new screen or both? PLS I NEED HELP

[@kyshkis13]

Major question..LCD screen with right position of connection is not available at all. Luckily change of position is possible due to long cable. Will it make a difference to use "longer" cable.

[@PC_Monkey]

Not sure if I understand your comment correctly. Does the current LCD cable not reach the port? If not then yes, you would need a longer one as you most likely do not have the correct cable. If the current cable is the correct one and reaches the port but the LCD is working, then no. Getting a longer cable would not work better than a shorter cable just because its longer.

[@marylynch8196]

Hello, thank you so much for your video. I was following you with my Acer CB311-11H Chromebook but you didn't show how to take the LCD Video cable all the way off once it's disconnected. I broke mine while changing my screen. Can you please tell me how to disconnect it and then reconnect the video cable. Thank you so much and have a great day.

[@PC_Monkey]

You wish to remove the LCD cable from the motherboard as well as from the LCD? If you are just replacing the LCD, there would be no need to unplug the cable from the motherboard.

[@DanielC19955478]

Hello, I have a HP 17e189nr with a broken screen, I'm going back to school so I need a laptop and can't afford a new one. The broken screen that came off is a V5. My question is, will a v3 replacement work on my laptop since my screen is V5? I'm not sure of the differences between V3 or V5. Also, when removing the LCD cable (first time in a laptop, I'm a desktop guy) I did not realize the tape was holding it on and was pulling pretty hard at the cable trying to get it to let go. Should I replace the cable as Well? The pins did not leave the harness I'm just afraid maybe I've shorted it out. Thanks for your time.

[@PC_Monkey]

For a computer that turns on but the display does not work, try this video first; kzbin.info/www/bejne/q161doOCmdWNbZI Let me know how that goes :)

[@DanielC19955478]

@@PC_Monkey My question was more of compatibility, if you happen to know the answer.

[@ameenahaq6822]

Hi My laptop model is Lenovo Ideapad 300. My laptop screen takes too long to turn on even if i restart it a couple of times from the power button. My laptop fell once a few months ago and now the left side panel where your charging socket is located has damaged. Sometimes the charging socket moves out of place so i have to press down the motherboard and plug my charger in. Also previously my laptop screen didn't used to turn on after i left it on sleep, i had to restart it to turn it on again. But now i have to wait a long while for the screen to start after i shut it down. Where do you think the problem might be?? Thanks a lot!!

[@PC_Monkey]

Try hooking the computer up to an external monitor. Does the external monitor take the same amount of time to engage or does it work faster than the computer's screen?

[@johnhensman4248]

Video #4 "replacing LCD/Cable - is there anyway to test cable - LCD turns on (sometimes) but goes back to gray if change angle hinges - believe it is a damaged cable? ASUS S300C. Have not tried external monitor, but believe it will show good. Is there some testing before opening and guessing?

[@PC_Monkey]

No real good way to test the cable. Its usually a pretty cheap part so if you have reason to think its been damaged, replace it :)

[@michaeleyler1746]

Thanks for the great video! I was wondering if you could elaborate on diagnosing whether a problem is with the LCD cable or the screen. So far I know it works with an external monitor and the touch interface works, but the screen is completely black.

[@PC_Monkey]

Then it could be either. There really is no way to tell which part it is as both part are after the motherboard. You just need to replace one. Usually the Cable as its the cheaper component.

[@michaeleyler1746]

@@PC_Monkey, thanks for the advice!

[@PC_Monkey]

@@michaeleyler1746 NP !! Good luck :)

[@mark4347]

This was great. Except for the highly anticipated Replace portion. I was just dying to view the missing minute where you show us how to reconnect the 40 pin back to the new screen. I am intimidated by not knowing which orientation to apply pressure from the ribbon cable connector onto the fitting on the laptop screen itself. If I come at it the wrong way will I crush the pins? Top down? Slide it in/on? Otherwise outstanding job on this video.

[@Intania123]

Thank you for the tutorial! I want to ask tho if my laptop has one green line when the screen is black and the line changed to pink when the screen is white, do I have to replace the LCD or just the cable?

[@PC_Monkey]

Have you tried hooking the computer up to an external monitor to see if the issue is with the LCD or cable?

[@Intania123]

@@PC_Monkey I just tried it with HDMI cable and it looks fine in external monitor. What does it mean?

[@PC_Monkey]

@@Intania123 That means its most likely an issue with your LCD or LCD Cable. Try reconnecting the LCD Cable at both ends to see if its just a lose connection. If that does not correct the issue, replace the Cable and the LCD one at a time until you find the one with the issue

[@yiannisserpico2646]

Thank you for your extremely helpful video. Please, every time I try remove this plastic bezels, some of the clips break. I do it so soft. I do not understand what I am doing wrong. Could you please give me some advice in order not to have any loss? Thank you!

[@PC_Monkey]

Its hard to know what exact shape the bezel clips are before you get into it so its hard to put pressure in just the correct spot to avoid breaking at least some clips. I find it helpful to insert the pry tool directly next to the clip when ones location is identified, and push in and up. However, even with a lot of experience and doing it right, some clips may always break.

[@yiannisserpico2646]

@@PC_Monkey Thank you for replying my question. Your information and advice is totally helpful !! Keep doing your extremely great videos that help us, inform us. Thank you for your time reading and answering my question !!

[@PC_Monkey]

@@yiannisserpico2646 Happy to help :) Always here if needed !!

[@angeldetoms1372]

Nice thanks

[@PC_Monkey]

Happy to help :) Always here if needed !!

[@lynmiddleton2883]

Followed all your suggestions in videos for black screen,can hear noises (3 clicks but no fan noise) but no display on laptop but will work on an external monitor via HDMI cable. Replaced LCD cable today. Still not working on laptop. Does this mean a new screen? Laptop is 7 yrs old Toshiba Satellite so wouldn't be surprised

[@PC_Monkey]

Yes. Most likely if your computer displays to an external monitor, then the issue is your LCD or LCD Cable. If replacing the LCD Cable does not help, the next step would be the screen

[@lynmiddleton2883]

@@PC_Monkey Thought that would be your answer so ordered new screen this morning. Thanks for confirming my assumption.

[@PC_Monkey]

@@lynmiddleton2883 Good luck !! Let me know how it goes :)

[@republicofliveGood]

Thankfully To heaven I had the same model: Toshiba Satellite c55-c, the same issue with my lcd cable etc. At last I can say that this model won’t be in my top 10 recommendations.

[@MichelePinchiarul]

Does the LCD burn out really often if the PC is on when pluggin/unplugging the flat cable 4:56 ? I have a pretty new laptop and have done that mistake trying to fix the flat cable connection

[@PC_Monkey]

Yes. Installing a new LCD with the computer plugged into its power adapter is not a good idea. Some of us even choose to remove the battery during install just to be extra safe

[@MichelePinchiarul]

@@PC_Monkey oh that's unlucky... Thank u so much for your quick response ;)

[@PC_Monkey]

@@MichelePinchiarul Happy to help :) Always here if needed !!

[@pinderthepimp7087]

Hey I have a 14'LG 2-1 Laptop Model: 14T990-U,AAS8U1. Key board stop working when it is 45-80 degrees 105 degree it starts working again. I have disconnected the camera cable and now works in laptop mode fine but no webcam< how to replace camera cable?