PERFECTING The Resin Printing Process! - Why You NEED To Use UV Tools!

Perfect your 3D prints with the help of #UVtools! It gives you the power to complete resin printing with ease.
UV tools scans and fixes your part, removing islands and adding holes where necessary, and then lets you manually add new pixels where needed. Watch our video for an explanation on why you shouldn’t underestimate this lifesaver!
If you have any questions after watching the video, then feel free to leave a comment below!
UV Tools' Github: github.com/sn4k3/UVtools
Cards:
Intro to Superslicer: • An Introduction to Sup...
Intro to Resin Supports: • Introduction to Resin ...
Auto Support Replacement: • STOP Wasting Resin on ...
3D Printing Tabletop's Phrozen Resin video: • Is more expensive resi...
0:00 Intro
3:27 Sponsor
5:09 Supporting the parts in Lychee Slicer
5:53 Getting the parts fixed in UV Tools
7:57 Removing the supports
9:17 Outro/Conclusion
🎁 Support us directly on Patreon! 🧡💯 / 3dmusketeers
🎁 KZbin Channel Memberships! 🧡💯 b.link/YTmembership
🛒 Shop Amazon with our Affiliate Code: amzn.to/3hrzVcL
🛒 Shop GreenGate3D with our Affiliate Code: b.link/GreenGate3D
🛒 Shop Prusa with our Affiliate Code: shop.prusa3d.com/#a_aid=3DM
Save 💰 💰 on Zyltech Filament use code 3DM at checkout for sweet savings off your entire order: Zyltech.com code: 3DM
____________________________________
Keep up to date by following us here!
Website: 3DMusketeers.com
Twitter: / 3d_musketeers
Facebook: / 3dmusketeers
Instagram: / 3dmusketeers
LinkedIn: / 3dmusketeers
Email: [e-mail]
#3DPrintingBasics #UVTools #UVTools3DPrinting
FTC Disclaimer: A percentage of sales is made through Affiliate links

[@schtoff8200]

Discovered this little over 2 months ago, apart from a LCD failure, zero fails since using it. Adds about 10-15mins per print, but saves so much more in the long run.

[@3DMusketeers]

Agreed, well worth the extra time!

[@WhamBamSystems]

very timely video! thank you

[@3DMusketeers]

You're welcome!

[@jimmyjohansson84]

This seem great, gonna try UV-tools tonight!

[@3DMusketeers]

Definitely do!

[@ChristopherLMunoz]

Thanks for the information. Struggeling with suction cups and hard to see where they are in Lychee but with this tool I could see straight where the issue was

[@3DMusketeers]

Oh gosh, yeah UV tools is a cheat code for resin

[@ParkerAnderson1]

Very cool to see this much knowledge on resin printing - it's hard to find info online about DLP printing for some reason. I have a question - I'm doing some prints in clear resin, and am getting a series of small bubbles trapped within solid sections of the model. What can I do about this? Would UV tools help spot these issues? Great video, I'm glad I found this channel!

[@3DMusketeers]

That's because there is air bubbles in the resin. You can hit it with a torch before you start to pop the bubbles. Also make sure you're not lifting too fast that can cause cavitation.

[@Victor-bx3js]

Great great video!

[@3DMusketeers]

Thanks!

[@Victor-bx3js]

@@3DMusketeers can we please please get a detailed tutorial on all the steps shown on the video? There is none on KZbin at the moment with the tools you used, neither with the automatic holes. Thanks so much for your great videos!

[@3DMusketeers]

@@Victor-bx3js It is on the docket!

[@Victor-bx3js]

@@3DMusketeers sounds great! Keep up the great work!

[@3DMusketeers]

Thanks!

[@Explore-Gobal]

A dose of honesty here. I spent 15 minutes watching this video and came away with - you should try UVtools. Now your headline did not state that you would give examples, which I was hoping to see, but if you're not going to give examples, this video could have been dome in less than 60 seconds. Don't get me wrong, I liked your presentation, though a bit long in the tooth, but next time, a bit more meat and less filling. I will check out your support video next cause you seem to do the supports like I do. Hope to get something out of that. Thanks for sharing.

[@3DMusketeers]

You will come to find out, for better or worse, brevity is NOT in my vocabulary :/

[@remcogroenheide2701]

When you dope you fast resin do you change your Cure time (1.5s)? And post Cure how long before you over Cure it?

[@3DMusketeers]

It varies on the doping. Always run some calibration tests.

[@johngover1455]

I noticed the laminar flow laser nozzle as soon as it popped up....any update on the performance or what you have learned?

[@3DMusketeers]

I never really got good performance out of it. Instead we did an FDM nozzle that just got the air closer. The issue was, likely, with all the channels needed and how thin they got along with my lcak of a perfectly aligned laser. caused issues. With FDM it just makes its own hole LOL

[@ashchan30]

How do I get rid of the layer lines? It really shows. Also, my prints keep sticking to FEP and not Build Plate. I sanded it, used PTFE 3in1 Oil in VAT, Changed Chitu settings, lift speed, exposure, etc. My prints collapses..i even tried a different orientation and extra supports. It may be too cold...will get a heater in but I'll try UV tools.

[@3DMusketeers]

Dutch chitu. It's crap. Use Lychee. The oil has been proven to only cause issues. Only real way to get rid of layers for sure is post sanding. Cones of calibration to dial in your exposure settings. Print at 25C or above if you can.

[@chucklamb3496]

I’m thinking of trying UVTools, I want to watch some videos first.

[@3DMusketeers]

We have a couple. Will be doing a deeper dive soon. But minimally the tools to find and repair resin print issues is amazing.

[@jeffreyschutt7451]

would love two see a post prosessing video i you can please

[@3DMusketeers]

Can add it to the queue! Won't have time to film it for these specifically but some in the future, sure.

[@mjyates119]

love your vid but how do you download this

[@3DMusketeers]

There is a link in the description.

[@TrasherBiner]

No man, the cheatcode is your slicer doing all these things (suction cups, islands...), which Lychee does even in the free version.

[@3DMusketeers]

To be fair, this was back when it didnt lol

[@gfodale]

Begin snark: If you ask if we want to see something in a future video, it's a pretty good bet we want to see it. Just add it to the schedule. If you need the chat activity, keep asking, but seriously. If it's something important like the other resin mentioned in this episode, just schedule it. stop singing, or get a singer to sing it. I haven't seen over caffeinated squirrel boy lately. Are you feeling ok? lol End snark: Well done, thanks much.

[@3DMusketeers]

You would be surprised about what I want to do and what actually gets views. Definitely trying to add it together! I do want to do more vlogs, but they do not perform well, so we may end up breaking it off into a separate channel. Who knows. I do love making content, but I also want to make sure our viewers want it too :) How I am feeling is nebulous ha ha.

[@pezpengy9308]

too bad uvtools wont work well with anycubic firmware... doesnt support sectioned printing. oh well.

[@3DMusketeers]

it doesnt? Have not heard that being an issue. What do you mean by sectioned printing?

[@pezpengy9308]

@@3DMusketeers uvtools sections off the print area to print multiple versions of the same print using different print parameters (exposure, lift, ot, etc) which is BRILLIANT because you can quite literally do a side-by-side comparison for each resin you use... but sadly not all printers can use it and the firmware in anycubic's machines doesnt support using different print parameters for different sections of the screen. i sure wish it did because its my go-to for resin diaing.

[@3DMusketeers]

oh, I have never tried that before, interesting!

[@pezpengy9308]

@@3DMusketeers its pretty nifty and is the real power behind uvtools. i load it every time i get a new resin. (unless i'm printing on my anycubics... ugh...)

[@3DMusketeers]

i need to learn UV Tools more.. It deserves a deep dive