PEUGEOT CITROEN DS3 1.6 HDI ENGINE FAIL CAN WE SAVE IT???

We take a gamble on a non runner DS3 and it is a bit rough!!! .#salvagerebuildsuk and we are always on the lookout for new #projects
USE CODE :- SR10 for 10% discount on your Car Vertical Check. Get 10% off car vertical with this link bit.ly/SalvageRebuilds
Instagram if you have a vehicle :- salvagerebu...
Instagram for Chris and his holidays, museum visits and classic cars:- / salvagerebuildschris
SRUK Cleaning kit www.jennychem.com/discount/SA...
For all sponsorship, Business /media enquiries please email :- [e-mail]
Please note Rob and Chris cannot be contacted on the above email as we do not have access. If you would like to get in touch please use private message on Instagram and always include your contact number.
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating , Body work , Mig Welding , Sheet metal Spot Welding , Fabrication Chassis Repairs , Engine and Mechanical repairs , #Restoration and Structural repairs on the Celette Jig .
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds , Quick flips , First wash , #Repairs , Salvage , #Restorations , Will it run , Will it Start , #Fail , #Accident damaged , Cat S , Cat N , Cat X Copart auction bargains , Non Runner , NON Running , Banger ,Flood damage , insurance write off , #fire damage , electrical fault , #stolen recovered , Unfinished #project and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, RS Turbo , Lambo , Land Rover , MG , MGF , Caterham 7 , Ford , Cosworth , Vauxhall , Fiat , Peugeot , Mercedes , Range Rover ,Bentley , Morris , Renault , Citroen , Honda , Toyota , VW , Series 3 , Evoque , GLA , Golf , 500 , Fiesta , Astra , Polo , Motorhome , Auto sleeper Camper , GTI , LSE , Lamborghini , Gallardo , LP 570-4 , Sierra , Midget , 360 , Transit , Crafter , Transporter , T5 , Combo, Berlingo , Partner , Mini , Beetle , Vivaro , Hilux , Sport and many more!
If you have a vehicle for sale that you think will be of interest to us please message Rob via Instagram and please include a contact phone number. We buy all sorts of vehicles , Boats and classic cars including Austin , Morris , Healey , Mg , Sunbeam , Talbot , Opel , XR2 , XR3 , XR4 , Bentley , Jaguar XJ6 XJ12 XJS , E Type , XKR , BMW E36 , 205 GTI , VW GTI , Viva , Astra GTE 2.0XE , Red Top , Triumph TR , VW Golf Beetle , Rover , MGB , 2CV , Midget , Nova , Chevette , Capri , P100 , lancia , Cortina MK1 Mk2 MK3 MK4 MK5 , GT6 , Jensen , Lotus , Bedford , J type , Minor , Datsun , Toyota , Sunseeker , Princess , Fairline , Windy , Hardy , RIB , Shetland , Fletcher , Bayliner , Searay , Pilot , Shakespere and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point , Makita , Sealey , Clark , Esab and Sykes-Pickavant .
If you are interested in a specific tool, please put your question in the comments section of the relevant video
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating, Body work, Mig Welding, Sheet metal Spot Welding, Fabrication, Chassis Repairs, Sand Blasting, Engine and Mechanical repairs, DPF cleaning, Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds, Quick flips, First wash, Repairs, Salvage, Restorations, Will it run, Accident damaged, Cat S, Cat N, Cat X Copart auction bargains, Non Runner, Flood damage, insurance write off, fire damage, smoke damage, electrical fault, stolen recovered, and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, Land Rover, MG, Caterham, Ford, Cosworth, Vauxhall, Fiat, Peugeot, Mercedes, Range Rover, Morris, Renault, Citroen, Honda, Toyota, VW, Series 3, Evoque, GLA, Golf, 500, Fiesta, Astra, Polo, Motorhome, Auto sleeper Camper, GTI, LSE, Sierra, Midget, 360, Transit, Crafter, Transporter, T5, Combo, Berlingo, Partner, Mini, Beetle, Vivaro, Hilux, Sport and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point, Makita, Sealey, Clark, Esab

[@itsmephil2255]

Let's all remember that at 1 point Chris didn't want to be on camera....now he is presenting the videos GO CHRIS!!!!! Great stuff guys 👌

[@jlewis1688]

Well done Chris your the best !!!!

[@markdowling5162]

Chris , the real star of the show.

[@pjr7661]

@@markdowling5162 They both are, it wouldn't work without either of their skillsets

[@gerrym4377]

Agree completely, Chris skills are awesome and it’s great to see his confidence infront of the camera now 👍

[@organiccold]

Since he showed himself in the toilet a new world opened hahah

[@christopherhulse8385]

With TV today so dull and boring, these videos will go from strength to strength.

[@matthewc.419]

Totally agree .......t.v still playing movies from the 80s !!!!

[@yhshah21]

Even KZbins getting boring only look forward to these videos and a few other build channels.

[@matthewc.419]

@@yhshah21 yep I know wot u mean 2022 year u tube died.......it got rid of us truthers , that's y !!!!!! U tube more adds that itv sky n channel 4 put together 🤮🤮🤢🤮🤮🤮🤬🤬🤬🤬🤬

[@organiccold]

Indeed, is a question of time until BBC gets Rob and Chris haha

[@matthewc.419]

@@organiccold the BBC cud never afford ........Chris n Rob

[@-abacchus]

The info Chris shared about the engine that sucked up water-leading to the cracked cylinder liner was both interesting and an eye-opener. Great stuff..!

[@WhosPhotoTube]

Those who drive through 'Rufford Mill Ford' should take heed ;-)

[@bingbong7316]

A mate did that with a Renault Espace through a ford years ago, low or bumper sited air intakes or something. The mechanic said "they all do that, sir".

[@richardhine6682]

@@WhosPhotoTube I was just thinking the same thing, Rufford Ford videos are a guilty pleasure....

[@fredscratchet1355]

@@richardhine6682 Yes Rufford Ford eats Beemers for breakfast😂

[@mistermikeanson]

@@WhosPhotoTube I don't think some of the clowns driving through there have any heed to take!!

[@hugocofely7305]

Chris takes the time to invent something. This is how you recognize a real professional, and then also take the time to explain it properly. It is a pleasure to watch a craftsman at work. Such a video can easily take an hour because it won't get boring.

[@nicholasdavies6264]

Chris = master mechanic! He knows his stuff! Thank you for another educational vid guys ! 👍

[@Jasonhughes258]

i would say more of a engineer than a mechanic

[@andrewhaden7822]

Loved this one

[@tomtodhunter1776]

Chris's home made tools are brilliant. Especially as they save time and a lot more disassembly. The schrader valve/glow plug tool is pure genius. That oil had been oil far too long, but I'm glad everything cleaned up. I can't wait to see if it runs, and I can't wait to see the new customs purchase. Top work. 👍

[@goldcrestcomputing]

Brilliant ingenuity! It’s what made British engineers the envy of the world. Your ability to overcome these complex engineering headaches with the minimum of fuss is a credit to you both. These videos should be played in schools to help boost the ever dwindling enthusiasm for STEM careers at technician level. Keep it up chaps.

[@trainmanbob]

It is such a joy to watch a video like this where camera shy Chris decides he is no longer camera shy and brings us all great knowledge and skill. It is marvellous. Well done Chris. (and of course Rob).

[@chriswilkes4350]

Chris's little discourse on the valve was extraordinary! Who needs Descartes, Derrida and Wittgenstein. Everybody needs a Chris in their life because he can fix anything! Absolutely amazing.

[@leonardclarke394]

chris &alan millyard combined could end up being the ultimate engineering experts what a tool to make keep up the top notch videos

[@tonyfurneaux3399]

Nice shout out to Alan, perfect, another genius in his field.

[@ragnarironspear1791]

Necessity is the mother of invention , nice one Chris with the valve tool

[@v88krb]

Wow, these videos just get better each time. I’m no mechanic but I understand what is needed and Chris clearly has a talent for explaining it, very well done, thanks.

[@Jmacphee1]

I genuinely look forward to Monday/Wednesday and Friday evenings just to watch the next one, In the trade myself and love all the videos you guys put out, best channel on KZbin 💪😎

[@daveperry8769]

I don't think it's fair to underestimate the contribution Rob makes, they both contribute content in their own way and that's why it works. Keep up the good work guys.

[@stomlinson32ify]

Really interesting seeing the results of a hydro locked engine. I’ve watched loads of videos of cars attempting to cross the ford at Rutherford and failing. Now I know the catastrophic engine failure that’s happening for my entertainment 😂 Thanks Chris 👍

[@toolrestoration]

Of course you can save it , you are like car mending super heros !!!

[@davep4589]

That’s what you get with someone who knows what they’re doing, explained brilliantly and made the tools as you go along, a lot of know how saves a fortune, if not in money in time alone, let’s hear this Swiss watch purr again 👏👏👏

[@duttontube]

Always love it when Chris fabricates custom tooling, the use of the schrader valve was genius!

[@craigb4719]

Where would the channel be without Chris the magician between bodywork and mechanical side and then you have Rob that always Manages to source a part from somewhere what a team 👏🏻

[@paultaylor9652]

Just so impressive to watch, old fashioned mechanics none of this it's broken let's get a new one. Great video Chris and Rob for getting the new parts.

[@KevinJones-ye3vw]

great to see what Chris can actually make from a piece of scrap bar and some bolts etc .another very interesting video guys . loved it ......

[@raykillick]

If the customer put that car into a garage they would want to take the head off and charge a fortune for it. There’s not many Chris’s left now. Well done for another great video.

[@wookiewookster1214]

Blooming excellent 👍 I love watching and listening to Chris’s mechanical knowledge, just brilliant 👍👍

[@graemew7001]

Thanks Chris, I now fully understand what hydralock means and exactly what it is. another school day 👍. As you say, I'm one of the ones who enjoys these engine videos as much as the bodywork ones.

[@davidbewick9208]

Top job again from Chris. Good to see someone actually engineering solutions.

[@casanova2232]

Engineering genius this is why Britain is great ,great logic Christopher 😉👍🇬🇧

[@davidwilkins4327]

Great work, great video - how does Chris manage to be such a massive expert on everything? Amazing!

[@michaelhynds8035]

Really great stuff gentlemen, fantastic detail and workmanship as always. Thank you so much.

[@richweston6202]

Absolutely loved the information from Chris! Genius! That hydro locked engine was interesting to see! Many thanks Chris and Rob

[@Paulscnccreations]

Woop woop Well done Chris. Not only have you saved the day, you saved the engine from being scrapped. 🎉 well done another great video.

[@jamesgay3207]

Love Chris's ingenuity to solve problems. Great stuff well done

[@paulanderson4894]

Chris is an old school engineer if he ain't got the right tool make it. Love what you guys do.

[@donegaljohn1]

Another great video Lads, Nothing beats a new bit of cardboard for laying on your back😂

[@davebolger3204]

Chris for Blue Peter…😂😂😂 Watching the Timelapse of the collet rebuilding was like watching surgery . Thanks to you both lads, great content.

[@darrenmoore7131]

Brilliant watching Chris at work, 12.40 it's like watching a surgeon. Well done on getting another customs vehicle, can't wait 😃

[@paulfrere7902]

Very enjoyable, both with the improvised tooling and with the hunt for the debris in the sump. It was CSI Salvage Rebuilds today 😁. Now I‘m looking forward to the next part of the BMW quarter panel replacement (plus this new customs seizure). Cheers and thanks to you both for another educational video.👍

[@ged3680]

Hello Rob and Chris, excellent work by Chris, people who are driving through Rutherford Falls should watch this video to see the damage they are causing to their engine by driving through 3ft of water. Excellent video. Thank you for taking the time to upload another video. Ged

[@paulcrockford9845]

Proper old fashioned engineering from Chris and excellent explanation of hydraulic lock,making the tools is proper mechanicing

[@tunnel7]

That tool to compress the spring is proper thinking outside the box just like I did all my working life well done m8 brilliant engineering thanks

[@duplicitousdemocracy2246]

Well done Chris, great explanation and ingenuity to solve problems. Excellent video.

[@raptor90wm]

Chris really is an artist of his trade, amazing how he does all these tricks and tips. It was actually very interesting, and informative to see what happens and engine that takes in water. Thanks guys ❤

[@christopherkingston9601]

How wonderful to see such a great bit of repair. Imagine how many things in this world are thrown away when they could have been fixed.

[@brianallen858]

Always look forward on a Monday afternoon to the first video of the week, thanks again Chris and Rob 🙏👍🦾⚡☘️🍍🌻🇮🇪🇮🇪🇮🇪

[@michaelwilson3844]

You guys are top notch honestly a Monday ,Wednesday & Friday never goes by without me tuning in to watch you guys in action you work great as a team , Chris I just love the way you go out of your way to explain what you thinks happened and how you go in to great detail what your doing ,love all these great gadgets you make up to get jobs done, well done lads

[@hvh377]

Well done Chris! Very clear and very informative. And I love both your accents. I'm not a Brit, but to me your accents sound really pleasant and relaxed.

[@stuartellis9518]

Really enjoyed this tutorial. Can't wait for the next part. I'm a bit of a mechanical dufus, but I find Chris's explanations really easy to understand.

[@williamlloyd3769]

Always wondered what an engine looked like internally after encountering Rufford Ford in England! No wonder some of those vehicles were DOA after going through water in those KZbin videos.

[@ryanperkins6699]

Chris should be called engine doctor Chris - the amount of knowledge and skill this guy has is outstanding 👍🏻 proper old school Lovely to see ☑️

[@picklesrule69]

I barely watch TV now, I find you guys way more interesting and I learn at the same time!

[@neilcook8941]

go on chris throw it out the door we love it

[@paulbeecham8313]

Proper old skool engineering there Chris, cracking result getting the collet back in, boy it needed an oil change, definitely poor maintenance issue here 😜

[@resto_roller]

Really love a bit of old school engineering from Chris. Beats buying a tool when you can make one.

[@SJR313]

Fascinating engineering with Chris providing a really interesting step by step guide with his skill shining through, ingenious 👍👍

[@ralphhowes]

Great job showing the details of the analysis and fix, fascinating stuff. Great audio too, adds heaps to the experience. Yes!

[@allandavies9488]

Another good video. It is so satisfying to make up your own ''special tools''. I have done so many times and still keep them in case I need them again. Rob and Chris go well together.

[@STANLIZ4]

Love the mechanicals and the electronic diagnosis/resolutions,great vids, love em!

[@brianlumsdon]

so impressive how you explain what happened and us people who are new to the channel love the work you guys do

[@XXXLAVERICKXXX]

Don’t tell Chris but he’s a feckin Genius.

[@haydenuk02]

Amazing work Chris & Rob and can’t wait to see if she’ll run on the next one. Thanks for sharing this with us take care

[@rogerfenton5210]

I've used a diesel compression tester connection to do this with similar results, love the show and attention to detail

[@dadsway3611]

I’m not a mechanic but I have been watching your channel for over a year now. This video was very interesting and how Chris made that tool and got all of the bits out of the engine, to me is amazing. Thank you guys. 😊

[@dandann8237]

different video but interesting, chris & his blue peter moment worth waiting for.

[@stephenricketts7764]

Back when I was young I would have removed the head. I might not have thought of doing that. Well done to Chris for making a tool and it worked very well. Essential that all the bits be recovered and now we have a nice clean sump pan ready for reassembly. Love the video Rob and Chris take care both of you. 👍👍

[@andru9102]

All that time in the past when Chris stayed silent on thesevideos we were missing some of the best mechanical explanations available on KZbin! Thank you for today’s explanation Chris, all really interesting and very ingenious

[@davidhatton6858]

You have to admit that Chris is a genius, i love these videos guys, keep them coming. Absolutely brilliant.

[@chr15b]

Chris blows us away with his skills yet again, love it!

[@martin4365]

Great film ! Fascinating to see how you go about making the repair. Very informative and whoever gets the car can be confident the necessary works been carried out to a high standard

[@iankane2847]

When Chris explains how to do things he makes it so simple for divvys like me to understand

[@stevenjones19-m8i]

Nice work Rob and Chris,all the bits and needle rollers at the bottom of the sump, Chris did a great job with the hand made valve tool.

[@chrisc9406]

A thoroughly enjoyable watch. The level of detail filmed on the repair is outstanding.

[@ianbrender9524]

Chris is one clever man. It's a pleasure to watch him work and explain his method in a clear and concise way. With what you both bring to the partnership it's a winner.

[@trumpetrider565]

Unbelievable engineering. Top stuff. My old man was like that. Rest in peace Dad.

[@chrisring6690]

Always look forward to the videos helps to break the week up and get you through work

[@johnchincotta1qwdb15]

Outstanding video. Chris and his engineering inventions speak volumes.Welll done guys good going

[@carolotsful]

so much more entertaining than anything on television - absolutely love watching these guys . Sat in a Lay by to watch. this tonight ,,,Thanks Chris and Rob

[@tomclare1333]

Really brilliant explanation of not only the dangers of lax maintenance but also hydro locking, loved it. Well done guys.

[@mikeharvey9844]

Great video again! I have used string in the past, stuffed down a plug hole till cylinder has plenty in, then turn crank so valves pushe into the seats. Then pull string out when done.

[@alextripp1230]

Hi Rob and Chris, brilliant idea and well made tool. Will run like a Swiss watch once reassembled guy's. Excellent video. Alex.

[@josephmccullough3031]

Great Video Chris... to be honest didn't understand bits of it but great to watch a Car Surgeon save an engine. Such a knowledgeable guy, and improvising to make a tool to do the job. 👍👍

[@justinkerr3033]

"Necessity is the mother of invention" - you're a genius Chris!

[@richardmounfield7822]

Nice work guys . Great to hear Chris talking his way through the fix. So pleased he called them by their original name , valve collets!! instead of keepers as some people refer to them as these days

[@pharoahegypt]

Great video guys. Just when I think I've seen Chris at his best, he pulls another skill/rabbit out his bag of tricks. Brilliant!

[@markallen7443]

This has to be the most informative,indepth channel on KZbin.love it👏👏👏

[@leefrancis4846]

Awesome work by Chris. The sound is also much better now. Can't wait for the next video now

[@gibgrth]

Great work guys yet again another great video! Thanks Rob & Chris👍

[@jarrodhayne560]

Fav vid, learnt so much. Chris is a ledge!

[@paulorchard7335]

Wow what a great idea Chris this is one of my favourite videos to date. Chris just wanted to say that you should be proud of yourself for how far you have come in front of the camera pal well done

[@markb7346]

Absolutely fantastic so see and listen to you both explaining and pointing out all the detail in that Citroën DS engine. Chris's engineering skills with the valve spring compressor and air feed adapter outstanding as always. New microphones are working well now. Much easier to follow the detailed explanations. Thank you both so much for taking the time to produce these fascinating videos. Looking forward to the next one and to find out what this customs seizure vehicle might be. Take care.

[@andicog]

Did similar on a 214 Rover years ago, used a tube spanner with the side cut out, a loop of rope under the inlet manifold and a long bar that sat on the tube spanner with one end through the rope loop and then leant on the other end to compress the valve spring, held the valves up using a compression tester with its schrader valve removed, screwed into the plug hole and connected to my compressor, did all 16 valve stem seals. Where there's a will, there's a way! 👍

[@hilux4996]

Hi Chris and Rob, just done a similar job on a Corsa 16v petrol (1.4 I think) which had a broken valve spring. We made some brackets to lock the cam pulleys and chain in place, removed one cam, did very similar to you but instead of compressed air, we started by feeding a long cord, bit thicker than a shoelace through the spark plug hole, then turned the engine to trap the valve shut. I had heard about this from 'old school' mechanics, and thought it was a bit of a long shot, but it worked perfect. Thank you for the channel and all the best.

[@islandhopperstuart]

Well done Chris: great bit of improvisation to save the day! Seeing this I'm reminded of how poorly designed the 1.6HDi oil pans are. The sump plug thread is recessed into the sump pressing and, despite the presence of a small drain hole through the thread (which blocks with carbon sludge) it effectively forms a 'bund' to retain oil and crud when the sump plug is removed. In those I've worked on I've drawn them out to remove the bund effect: it reduces ground clearance for the sump but means that crud in the sump stands some chance of draining fully when the sump plug is removed.

[@clutchdroptv4345]

Another job well done Back in the days I had a similar job on a cavalier 2.0 Sri 8v that had a snapped belt it broke some followers and also had a collett that jumped out I tried the compressed air but the other collett was so stuck the valve kept opening when I pushed on it so I got a ball of string and threaded it down the bore then brought the piston up till it was locked that was enough to hold the valve in place so I could compress the spring U can't beat the old school tricks

[@essex__rider]

Top work there guys, loved Chris’ detailed description ❤

[@stuhukin5237]

Thanks again Rob and Chris. There are many super interesting things on your channel but nothing more interesting than watching Chris making a tool to solve his problem! I really enjoyed this one. And a teaser for another customs seizure. That’s another great one on the way for sure.

[@passion8059]

Chris you are a genius with the tools you create to help yourself. Another cracking video. Thanks!

[@Britoverseas]

I agree that Chris did an awesome job explaining and showing what he was doing. Even I understood! Way to go guys. Great job and really enjoyed it. Thanks

[@rickydub6950]

My mate had similar piston damage when a couple of swirl flaps fell in on his bmw 🤦‍♂️ excellent engineering work chris, love seeing tools and set ups being built from scratch 👌

[@nickmitton7350]

Loving theses little installments on the timing failure car/vans. Every day is a learning day. Carry on the good work boys!!

[@daystatesniper01]

This was a cracking video ,the amount of bits in the sump was amazing ,and the blown pot in the scrap engine was amazing also ,thanks guys .

[@diides2009]

Chris skills never stop amazing me! Excellent mind able to solve almost anything! Nothing has stopped him yet.