Phantom 3 Gimbal Motor Overload Fix

[@Dellima100]

Vou tentar fazer no meu! Muito obrigado por ter compartilhado sua experiencia conosco. Meu Drone caiu na mata e ficou la por duas semanas tomando chuva e sol. Achei ele e desmontei tudo, lavei e remontei mas ao religa- lo meu guimbal ficou assim. Muito loco! Mais uma vez obrigado pelo vídeo!

[@XB223]

Awesome! I haven't flown my P3P in over a year and had the same erratic behavior. I followed your instructional video and... problem resolved! It's odd how this happened while sitting in its DJI carry case that something like this could happen. Great post! Thank you! Liked and subbed. oh, my last flight was the day you posted this video

[@JustJuice42]

XB Glad you’re back up in the skies now, you made need to use a small touch of glue it the problem keeps returning

[@XB223]

JB No doubt, I absolutely will. Thanx again for the post! Have a great short week!

[@timwurz1580]

Hi my drone has the exact same problem. The gimbal moves around like crazy, but it checked the box behind the motor, everything is lined up like its supposed to be. Idk, what else could be wrong here?

[@PONCE103]

I have a Phamton 3. The camera don’t move sideways and up and down with the control what will be the problem thank you for your time

[@kevinhale4921]

Thanks Mate! Great video

[@tonymcclendon-hobbytime7727]

Thanks, informative video

[@mateoescorcia4272]

Muchas gracias por la información, 100% funcional!

[@JustJuice42]

De nada!

[@bugragul8320]

Your a lifesaver thank you!

[@Magiclenses]

I have an issue after an accident the Flexible Gimbal Flat Ribbon Flex Cable broke and I ordered a new one and installed it once I install it camera because craze as it in your Video . I tried to do as you did no luck same issue I ordered a new Gimbal Roll Arm & Motor . I installed them but same issue camera is very crazy please let me know if you can help Thanks

[@JustJuice42]

Sayed Saleh If you have changed those parts and there is still an issue, even after calibration then I am not sure what it could be. I would recommend you search the issue on some DJI Phantom forums on Facebook and Reddit, they can be very helpful, good luck

[@spencernalder7333]

had to repair my gimbal than put it all back together and it wouldn't work... tell i watched this video so thank you!!!! :)

[@frostedmantis6414]

I have the same problem, but mine goes in a different pattern. The camera goes in a crazy lazy-8 pattern

[@fabriciofo7os766]

you save me! thank you very much!

[@diegorobles6247]

How you twisted it?

[@patrickvalencia5535]

I have the same problem. I follow all the procedure but still the gimbal go crazy still.

[@brianmorrison8126]

did you ever figure yours out?? Mine is doing the same thing

[@roansmith4876]

Thanks fixed my drone great video

[@davidg5971]

I have the same drone but the metal rod on mine can not be moved independently of the camera.

[@JustJuice42]

Do you have the same "gimbal motor overloaded" issue?

[@BirdWhisperer46]

Did you have any warning it was going to do this? Or it just happened one day?

[@JustJuice42]

it just happened one day, maybe it was knocked in the past?

[@XB223]

Mitch - mine just happened after sitting in the DJI carry case. As you asked, it just happened one day

[@aljunior1281]

sorry i dont understand good, do you changed the card?

[@JustJuice42]

Alvaro Alvarez no do not change the card, only turn the piece of metal

[@aerodroneaguaslindas]

Meu gimbal está assim

[@raulbaun]

Mine not fixed, what could be another solution

[@OmarAngelGarcia]

raul baun Keep trying. It took me a few times.

[@reginaldaragones6486]

Possible cause?

[@JustJuice42]

Reginald Aragones Due to a loose axis, if the gimbal is left to hang freely or if it gets knocked even slightly it will become misaligned again