PICHLER M9R Injector Removal Tools for seized diesel injecotrs

For removing frozen common rail injectors from the cylinder head using 20 tons hollow piston cylinder. In case the injector breaks off during pulling on the lower screw connection can the additional pull spindles be used to pull out the rest of the injector.
It is recommended that after successful removing the injector to recondition the injector shaft with our Cleaning Set 9038100.
M9R (2.0):
Nissan: Primastar, Qashqai , X-Trail
Opel: Vivaro
Renault: Espace IV, Grand Scenic II, Grand Scenic III, Koleos, Laguna II, Laguna III, Latitude, Megane CC, Megane II, Megane III, Scenic II, Scenic III, Trafic II, Vel Satis
M9T (2.3):
Nissan: NV400, Opel: Movano,
Renault: Master III
R9M (1.6):
Mercedes C-class: C 180d / C 200d
Nissan: Qashqai, X-Trail
Opel: Vivaro
Renault: Espace V, Fluence, Grand Scenic III, Kadjar, Megane CC, Megane III, Mégane IV, Scénic III, Talisman II, Trafic, Trafic III
For piezo and solenoid valve controlled Bosch injectors
Because of the patented construction, where force is distributed on six places on the cylinder head, is pulling with 20 tons pulling force made possible
Additionally are the injectors clamped multiple times. Through this multiple clamping is a safe pulling with 20 tons pulling force assured
-Including illustrated operating instructions.
Pulling force 20 tons
www.pichler-tools.com/
shop.pichler-tools.com/injekt...
Please call our UK office on 01335 360759 for further information and orders
Item No: 60382095

[@deanoflip7459]

Brilliant tool this is, the trouble people experienced trying to remove these Renault/Vauxall Injectors in the past, before this removal kit come about, makes life so much easier....

[@AndriiSidliarov]

These injectors usually have to be drilled out. Good advertising.😉

[@scwarzewaffe85]

What a fantastic piece of kit! What’s the RRP in GBP ? Looks like something my place could do with.

[@samanamini6596]

What is the price of this tool?

[@draganion8908]

what is the price in March interested me one

[@youssef201016]

Mamma mia che motore di merda,anche si un motore affidabile che fa tanti klm,però quando inizia a darti problemi!!!!hmmmm,ha un difetto che l'acqua entra dentro il cofano e si accumula dove si trovano le iniettore dopo di che si creano piano...... Il zinco e ruggine,quando il meccanico di fiducia vuole intervenire per farti risparmiare non vengono fuori tranne con la sua attrezzatura fatta apposta e costa un sacco di soldi e lo fanno apposta a costringerti di andare a loro officina autorizzata,anche i bulloni si spezzano, Renault a fatto un sporco lavorò,bravo Renault.

[@darren4364]

What about the other type of injector with the grey top? there are two injector types in m9r engines I would be interested if your tool can remove both types.

[@boosthit811]

You are talking about the bosch side feed injectors......the ones in this video are piezo. These ones didn't seem that stuck compared to the bad ones I've seen!

[@josepeixoto3384]

did you turn the radio off yet lol

[@tomsurrey2252]

I know, annoying, isn't it!!!