PID loss in SOLAR Panels | Explained

[@danakinscheuer]

This panel can put out close to 100 watts kzbin.infoUgkxOqI2yqX0XVrhR2BMJciTWrHJpG8FhJyg when positioned in the appropriate southernly direction, tilted to the optimal angle for your latitude/date, and connected to a higher capacity device than a 500. The built in kickstand angle is a fixed at 50 degrees. Up to 20% more power can be output by selecting the actual date and latitude optimal angle.The 500 will only input 3.5A maximum at 18 volts for 63 watts. Some of the excess power from the panel can be fed into a USB battery bank, charged directly from the panel while also charging a 500. This will allow you to harvest as much as 63 + 15 = 78 watts.If this panel is used to charge a larger device, such as the power station, then its full output potential can be realized.

[@drzeelpurohit3169]

Very nice explanation! It caused by environmental conditions (high temp - high humidity) + negative grounding + sodium ions migration from glass. It can be mitigated via float grounding connections as well as by using good EVA and back-sheet to reduce leakage current also by using low sodium glass.

[@SustainableEveryDay]

Thanks for the support

[@RamKumar-ox9xq]

Good morning

[@SustainableEveryDay]

Good morning

[@trivedihetav2117]

Hipot me pakad payenga pid?

[@Gopinath-panda]

Right

[@maqboolakmal2083]

ماشاءاللہ بہت خوب مقبول اللہ تعالیٰ آپ کو کامیاب کرے آمین ثم آمین

[@rashidahmad3287]

یہ کوئی بھارتی ہے اردو نہیں پڑھ سکتا ۔

[@needzmart]

Very new and rare information you have provided in this video. Keep ot up.

[@pankajverma2182]

Good Info. But the Plant some of the modules are in shadow. Juts behind you at the end of the video.

[@SustainableEveryDay]

Yes nice observation

[@syedali-mr3ok]

Very important knowledge I am gaining from your channel and dear I am very thanks for this information and just I am under the training of solar system and your all videos are very awesome

[@solarenergy1359]

Bahut accha video he or age ese hi lage rehna great job and best of luck you are no.one.

[@SustainableEveryDay]

Thanks for the support

[@RajeshKumar-pe9xu]

thank you brother i am working Abu Dubai 1177 MV has an technician very nice explanation good luck my friend

[@ajaytripathi4809]

You are doing fabulous job bro ...u are simply awesome ..ur effort guides professional as well as fresher..God bless u

[@SustainableEveryDay]

Thanks for the support

[@rooparam7398]

Sir Aap ke watsapp no kya ha

[@prakashjogur1244]

Thanku. Good Information.. I'm too O&M Engineer at Solar Power Plant

[@mdismail7637]

Where you working?

[@kevalsaini8273]

Hello kaha pr

[@sardarayoubsardarayoub1391]

Very cool knowledge full video.thanks Himanshu bro for information.

[@letsgochachu1667]

Very nice sir always learn something new from your videos.

[@SustainableEveryDay]

Thanks for the support

[@MuhammadIbrahim-oi8im]

Very Informative video Thanks Sir

[@Samiullah-gh7cz]

Sir very informative video, your explanation is unique.

[@YOGESHYOGI-oi6ee]

Sir what is pid sir

[@SustainableEveryDay]

Thanks for the support

[@chakra531]

can you please explain netmeetering and solar wheeling rules in UAE?

[@ashrafmuhammad412]

Information is well explained. So Thanks.

[@SustainableEveryDay]

Thanks for the support

[@Neerajkumar-zs5qh]

Nice bro keep sharing the knowledge👍🙏

[@SustainableEveryDay]

Thanks for the support

[@Solarismypassion]

clear perfect explanation - PID clear

[@salmanjaved4393]

Bundle of thanks for delivered us quality knowledge.

[@SustainableEveryDay]

Thanks for the support

[@er.williamsrohit2624]

Potential induced Degradation PID induced there is induced current and effectiveness of solar cell and module and high humidity and performance loss with less generated output power When induced voltage are present in the solar cell impact on solar performer efficiency with generated power . Prevention 1- more amount of leakage current then there is burning of solar module/ pannel due to high voltage are present in solar module .......stay safe with safe future 🙏

[@nirajranjit191]

Hi, I'm face this PID issue in my plant and complain to the Module Manufacturer ( 57 modules this issue ). Manufacturer Quality team identify the issue but little bit confuse what type of issue this. ( they provide 7 Modules on warranty ). That time I'm face very difficult situation. Now I'm share this video to them. Thanks Bro for this video.

[@SustainableEveryDay]

Thanks for the support

[@gurpalsingh7993]

Hum tumari vedio dekhte v hai orr share v karte hai ..hum v 50 MW Plant me JE hai...

[@SustainableEveryDay]

Thanks for the support

[@showbudgies1517]

Impressed finally some one explaining

[@Sonu-ng8ww]

Good information but back side Tedler hota hai white colour wala. EVA is transparent material which is used encapsulation and save from moisture. Thanks bro

[@a2zconcept416]

Hlo Himanshu bro AK vedio yr total fult py bnana or kasay unko ok kre

[@SustainableEveryDay]

Hm hmmm good idea , soon

[@10_dharnebhisaji90]

Very nice explanation Sir 👍

[@harilalyadav5057]

Bahut achchhi jankari dhanyavad.

[@shubhamparab6028]

Best way to subcribe your channel 😂😀 nic way to understand sir ..

[@SustainableEveryDay]

Thanks for the support

[@waqqarahad8762]

Nicely explained

[@sureshkumarjena2350]

Very good explanation sir ,Thanks a lot.

[@SustainableEveryDay]

Thanks for the support

[@joshrrr3819]

Plzzz do more solar videos plzz ur videos good

[@bikramparida8303]

Awesome explanation

[@SustainableEveryDay]

Thanks for the support

[@roger1857]

Excellent knowledge. How to resolve PID issues?

[@solarverse8728]

Today I saw it video,it's amazing.....great job sir ,I am subscribe if channel

[@SustainableEveryDay]

Thanks for the support

[@munawarjawaid9674]

Nicely explained regarding PID loss. Thanks

[@SustainableEveryDay]

Thanks for the support

[@htoozawlwin968]

Hey, great content. it would be really fantastic if you can make explanations more in English. You'll definitely get more followers.

[@hanial-shadadi9122]

You are right.. At least give subtitles

[@MushtaqKhan-mp1bb]

❤❤ very good for teaching.❤❤

[@mukeshbhardwaj1756]

Good afford dear Please make video regarding sloar modules effect like snail trails, hot spot etc

[@SustainableEveryDay]

kzbin.info/www/bejne/hqjGgpWufqxpibs

[@amitabhbagchi1]

Very Informative vdo...

[@farhatalam8992]

well bro...zabardast......

[@Electrical_Soumen]

Bro tell why does charge does it flow in frame instead of In busbar

[@SustainableEveryDay]

Due to poor lamination , potential difference is developed

[@niteshsood3000]

Thanks Himanshu..👍👍

[@SustainableEveryDay]

Thanks for the support

[@umeshchauhan955]

Sir floating voltage km nhi ho rha kya kre cable sb thik h inv. Me pm isolation fault aata h

[@adilakbar3053]

Nicely explained Sir

[@vikrant45]

small line on cell are ribbon, ribbon takes current to bus bar and then main bus bar

[@UKG9533]

Thanks sir i am too Safety officer Tata power solar system good information

[@rameshwarmishra6002]

Thanks ❤❤ sir good information

[@SustainableEveryDay]

Thanks for the support

[@NurulHuda-l2i]

Thank U brother for ur explain,but how to protect it?

[@smilewithdp2779]

Very important topic.. thankyou sir 🙏

[@SustainableEveryDay]

Thanks for the support

[@rajendrapagare4948]

Very nice ..sir

[@SustainableEveryDay]

Thanks for the support

[@samisamiullah7567]

Hahaha maza aa gya Sir bht pyara bolty hain ap

[@SustainableEveryDay]

Bhai thanks

[@somchandrasinghrawat3792]

Bahut sahi sir

[@SustainableEveryDay]

Thanks for the support

[@neelambora7555]

Very informative video...can you plz explain how reversing the connection can reduce PID effect...it's urgent..plz

[@rj9371]

Kar diya bhai subscribe 😂😂 trick acha tha subscribe karane ka.

[@saibhakt1465]

Great... Thanks.... 👌👍

[@khalidawan8072]

Very informative video

[@ramvilash1512]

Ji sir ak video optimizer ke working ke bare me banao.. Plz What is the optimizar and optiimizar working.. Full details

[@SustainableEveryDay]

Sure very soon

[@KBelectricals]

Sir us string ko charge rakhna chahiye ya off kar dena chahiye

[@zulfiqaralirawjani8351]

Xcelent informetion

[@SandeepSingh-rz4ix]

I like it video viva and practical and interview questions answered video

[@SustainableEveryDay]

Thanks for the support

[@ramvilash1512]

Sir plz Optiimizar ke bare me baato ki optimizar se foult kase chak hota h

[@galcharviral1404]

Ya it is greate explanation but please avar Propper PPE like Full body harness with double lane yard (for life line ) , Safety helmate and safety jecket when you are working at Work at hight

[@sumitmulik8005]

Very useful information 👍 thank you

[@SustainableEveryDay]

Thanks for the support

[@faizahamad4283]

Sir modolos ka aliments ke bare me bataye

[@SustainableEveryDay]

Sure soon

[@satishsaxena2650]

So informative sir...

[@SustainableEveryDay]

Thanks for the support

[@gandhidas8109]

Nice information..Could you please tell me in case of lightning⚡ solar system stop working then what fault would be

[@SustainableEveryDay]

Damage equipment

[@vikramvirk8421]

Thanks for good information

[@rcnvlogs8443]

Very nice 👍👍👍

[@nareshdadi1441]

Super bro.. Very informative ..

[@SustainableEveryDay]

Thanks for the support

[@subbaraoj]

This info not aware of many users

[@arnavjoshi11215]

Please make comparison video for Modules...

[@ganisakat7782]

Really good information no one can explain in detail like u about solar panels keep doing more and more videos

[@SustainableEveryDay]

Thanks for the support

[@surendrakverma555]

Good. Thanks 🙏🙏🙏🙏🙏

[@KBelectricals]

Sir jin module ka glass toot jata hai un module ko maine jab separate string me laga kar jab uski efficiency chack ki tab doosri string ki tulna main uski efficiency 15% to 20% aa rahi thi

[@SustainableEveryDay]

15 to 20 efficiency drop hui correct ?

[@srk_21]

Thanks sir 🙌🙌

[@SustainableEveryDay]

Thanks for the support

[@Techatul]

Great job bro...

[@dantesplay7498]

Why negative grounding is adopted in solar power plant?

[@sangappaguddad1999]

Thankful to you sir

[@yatendrasingh4759]

New panel 13 rupe watt mil rha hai mono perk half cut bina warranty le loo kya please bataye

[@shambhusharanbeni129]

50kw ka inverter hw.comm1 hai kaise dhik hoga

[@vipinpahujani]

Brother, thanks for taking so much effort. Is it true that n type cells, don't suffer PID losses ? Give some brand options for double glass module available in india for home rooftop use.

[@SustainableEveryDay]

Jinko

[@sunilteli6268]

sir ye wale losses thin film solar cell main bi hote he kya..?

[@SustainableEveryDay]

No

[@sunilteli6268]

@@SustainableEveryDay thanks sir

[@lokanathbehera8455]

Great sir,

[@SustainableEveryDay]

Thanks for the support

[@RishabhPandey-c8d]

please explain LeITD and TId also

[@armack5099]

Thank you so much for given a good information 😊😊

[@vsksolutions340]

Perfect information 👍👍

[@SustainableEveryDay]

Thanks for the support

[@jinishcrajan]

good explanation

[@manpreetsingh-hv3sl]

Gud information... Thanx

[@CATips]

Nice bro... Im also solar tech

[@muhammadfarhananjum5423]

Zabardast sir

[@premvrihana4040]

Bhai panel kyon junction/heat kis vajah se hota hai

[@SustainableEveryDay]

Improper soldering

[@SajidAli-th4rx]

Jis series k module m ye problem huwa us series ki puri voltage ko ground kr dega is tarah se ye plz reply

[@SustainableEveryDay]

Not complete voltage the amount will be very very small there will be drop in dc current density over period of time

[@SajidAli-th4rx]

@@SustainableEveryDay thanks

[@dkmanna]

Good information 👌👌 can you please clear how to know or check my modules have PID??

[@SustainableEveryDay]

Check genration efficiency from SCDA

[@dkmanna]

@@SustainableEveryDay Thank you.

[@cricketanalysisguru003]

Good information

[@filledbynature6176]

Thank you

[@pradippremlalchhanikar739]

Thanks for the information..

[@artelugugaming6809]

Hi sir The module has soil and shadow on it. How to separate the loss of both

[@gurunanaksolar5993]

Thanks for the information 👍

[@SustainableEveryDay]

Thanks for the support

[@ersumit002]

Very informative 👌If possible to you please make video on Inverters ( Types of Inverters , Inverter start parameter,Inverter stop parameter)

[@SustainableEveryDay]

Sure soon

[@kanakapudiajaybabu8321]

Potential induced degradation