How To - Pioneer DEH-S1200UB - Audio Settings

[@MrMacario76]

Hi. And thanks for that information. I hope you still around. My stereo (which is the same as te one on the video) is not working from the RCA connections. Does that has to do with the Sub Woofer settings?

[@pioneerelectronics]

Please be more specific with your question. What's not working? Is your external amplifier operating correctly? You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@Jenny10696]

Can I change folders / select a specific folder on my USB drive?

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? If you are using the Pioneer DEH-S1200UB or a similar receiver, when on the USB source, you can change folders on a USB drive by pressing radio station preset buttons 1 and 2. You can learn more about using the USB source for music in this How To video from Pioneer: kzbin.info/www/bejne/e2avgXlrbpdrZ68 You can find a full playlist of How To videos from Pioneer about DEH-S1200UB here: kzbin.info/www/bejne/lYHTomimpL5sjtU and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@hasindurashintha6954]

Thanks you

[@pioneerelectronics]

You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@Srivishnutejas]

Thank you 😁

[@pioneerelectronics]

You can find a full playlist of How To videos from Pioneer about DEH-S1200UB here: kzbin.info/www/bejne/lYHTomimpL5sjtU You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@sergiotheking-r9z]

can i control the speaker level for each individual speaker?

[@pioneerelectronics]

As of 2022 June, the Pioneer DEH-S1200UB is Pioneer's entry level CD receiver. You have a fader and a balance control, and a subwoofer output level control. There is no individual speaker output control on the DEH-S1200UB. You can download the owner's manual for this product directly from Pioneer here: www.pioneerelectronics.com/StaticFiles/Manuals/Car/DEH-S1200UB_OperationManual102620.pdf If you are looking for more advanced features like individual speaker level controls and, independent crossover and slope controls please consider a more advanced Pioneer receiver like the DEH-S6200BS seen here: kzbin.info/www/bejne/ZobKoH5vq8R-ma8 or the Pioneer DMH-WT7600NEX seen here: kzbin.info/www/bejne/hWrciZ2cqr-Dqq8 You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@florentino786]

When I put rear / sub my subwoofer dosent work how to fix that

[@gopyyanusdev3486]

What do you use to turn on the car audio at home

[@pioneerelectronics]

Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? What is your question? You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@Koi_MINI4WD]

Please review pioneer deh-s1250ub

[@deckerdotto6035]

The operation for Pioneer DEH-S1250UB is nearly identical to the operation of Pioneer DEH-S1200UB. You can find a full playlist of How To videos from Pioneer about DEH-S1200UB and nearly identical to DEH-S1250UB here: kzbin.info/www/bejne/jKeXapmjjNSYhsU and you can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@eduardobenitez6619]

How do you turn off the bass from the door speakers but leave the bass from the subwoofer? I got the same stereo from the video

[@eduardobenitez6619]

Or to lower the bass on door speakers

[@pioneerelectronics]

I'll need more information to give you a complete answer. Do you have front and rear door speakers? Are the front and rear door speakers hooked up directly to the in-dash receiver front and rear speaker outputs? Is the subwoofer connected to the receiver's RCA outputs? If you have the Pioneer DEH-S1200UB with the front and rear speakers connected directly to the receiver and a subwoofer running from the RCA outputs, you'll need to adjust the receiver's Initial Setup SP/PO Mode set to REAR/SUB.W You can learn more about it in this How To video from Pioneer: kzbin.info/www/bejne/mGfZiqGdebOogZY Next, if you have the Pioneer DEH-S1200UB, and you have the door speakers connected to the Front Speaker Outputs of the in-dash receiver, you'll need to switch on the HPF or High Pass Filter. You can see it in this Pioneer How To video: kzbin.info/www/bejne/o5aoeJ-PlNdgf6c As a place to start, set the HPF to 80Hz and -12 dB per octave slope. If you find you need to remove even more bass from the door speakers, change the HPF setting to 100Hz. An HPF or High Pass Filter only lets frequencies above the selected number to go to the door speakers. You can find a full playlist of How To videos from Pioneer about DEH-S1200UB here: kzbin.info/www/bejne/e2avgXlrbpdrZ68 and you can find videos about Pioneer Speakers here: kzbin.info/www/bejne/mKjVe2eCmN57o7c You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@adamszym5113]

I do not see the fader option and the rear speakers are not playing. right after installing the radio, this option was visible. Help please

[@pioneerelectronics]

This is normal operation if you have the system setup with subwoofer output on the rear channel. It sounds like you have the receivers Initial Menu Speaker/Pre-out set to subwoofer. Please take a look at this video for information on how to change this output: kzbin.info/www/bejne/mGfZiqGdebOogZY If you want a fader option be sure to choose REAR/SUB W. in the initial menu. You can learn more about setting up the subwoofer output here; kzbin.info/www/bejne/g6myoGWejbRrrbM You can find a full playlist of How To videos from Pioneer about DEH-S1200UB here: kzbin.info/www/bejne/eGevd6xtesqtjJY and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@nathanielniles8461]

When press my bass button to off, would the bass be completely off?

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? If you have the Pioneer DEH-S1200UB, the Bass button is for the Bass Boost. You can learn how it works in this Pioneer How To video: kzbin.info/www/bejne/o5aoeJ-PlNdgf6c You can find a full playlist of How To videos from Pioneer about DEH-S1200UB here: kzbin.info/www/bejne/jKeXapmjjNSYhsU and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@nathanielniles8461]

@@pioneerelectronics I have this same model. Thanks

[@TheyKaulMeDanny]

Is it totally impossible to sync an iPhone to this even via USB?

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver?

[@TheyKaulMeDanny]

@@pioneerelectronics the one in the video. DEH-S1200UB

[@pioneerelectronics]

@@TheyKaulMeDanny The Pioneer DEH-S1200UB is not designed to work with iPhone.

[@chriswilson3010]

Hi I cannot get a sound when direct SW connection even though ive turned on SW to rear in the settings , Pioneer DEH-X8700BH

[@pioneerelectronics]

It is possible to operate a small subwoofer on the rear speaker output directly from a Pioneer in-dash receiver. Please note: This is a connection to the rear speaker outputs and not the RCA outputs. I recognize model numbers DEH-X8700BS and DEH-X8700BH. Please be sure to check the model number of your Pioneer in-dash receiver. The instructions below are for the two models shown above. You should be connecting the receiver's Purple, and Purple/Black speaker output wires directly to a small subwoofer. The Green and Green/Black should be properly terminated so they don't come in contact with any other wires or metal in the vehicle. Owner's manual page 21. You can learn more about wiring your receiver in this Pioneer How To video: kzbin.info/www/bejne/oYOVfoJooNx5q8k In the receiver's Initial Setup S/W Control settings choose SP:SW. This will mean the front speaker outputs are full range and the rear speaker output is subwoofer. When using this setting, No Fader Control will be available. This is normal operation. This is because you choose to change the system from Front/Rear output to the new setting of Front and Subwoofer output. The subwoofer output has an independent level control. In the Audio Settings Menu, be sure to switch the Subwoofer 1 setting to Normal or Reverse. Owner's manual page 19. And in Subwoofer 2 choose an LPF crossover setting. I recommend to start with 80Hz and an output level of 0. You can find the owner's manual for the Pioneer DEH-X8700BS / DEH-X8700BH here: www.pioneerelectronics.com/StaticFiles/Manuals/Car/DEH-X8700BS_OwnersManual090914.pdf You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@cannabine413]

My Balance is not in audio I had two speakers hooked up for awhile but before I switched from 2 back to four speakers my Balance is no longer there how do I find it again

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? Balance is from Right to Left. Fader is from Front to Back. You can see it here: kzbin.info/www/bejne/npqngHambJqId6s Please watch the video with the sound on. You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@mannyb.5925]

So no setting for the treble ?

[@pioneerelectronics]

Modern Pioneer receivers don't have a bass and treble setting. There is a much more powerful sound shaping tool called a graphic equalizer. Don't be afraid of it. It's easy to use. On the Pioneer DEH-S1200UB, all 5 settings in the Equalizer are frequency adjustments. You can use them to make any given frequency a little louder or a little quieter as compared to other frequencies and without changing the volume of the other frequencies. The frequency adjustments are arranged like a piano keyboard with the low frequencies to the left and the high frequencies to the right. If you want more bass, I recommend the "SuperBass" preset. It will add a lot more bass into the music. If you want more treble, I recommend the "Natural" preset. It will roll off the bass, and add in more treble. If you are listening to a ball game or people talking, or an audio book, I recommend the "Vocal" Preset. You can see the presets in this How To video from Pioneer: kzbin.info/www/bejne/kInKZ2CqgdqInrM You can make your own adjustments too. Simply start with any EQ preset that sounds pretty good to you, and make your own adjustments from there. The 50, 80 and 125, frequency bands are typically the bass frequencies. 3.15k, 5k, 8k, and 12.5kHz are typically the treble frequencies. You can find more videos on Pioneer's You Tube Channel here: kzbin.info

[@Mainseba]

How i can connect bluethoot in iphone

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? If you have the Pioneer DEH-S1200UB, the receiver does not have built-in Bluetooth. If you have a different receiver that has built-in Bluetooth please take a look at this Pioneer How To video for a demonstration: kzbin.info/www/bejne/amOofZKAfL2WgNU You can find more videos on Pioneer's KZbin Channel here: www.youtube.com/@pioneerelectronics

[@hasindurashintha6954]

Proneer 11.50 settings please

[@pioneerelectronics]

Please be more specific with your question. You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@blackphoenix2837]

In my pioneer 1250 when we hear music with a pendrive we can't hear a song upto 1minute after every 1 second the music changes what can I do it's not the problem of pendrive 😭😭😭

[@pioneerelectronics]

It sounds like you have MIXRAX switched on. I recommend to turn it off. You can learn more about MIXTRAX here: kzbin.info/www/bejne/i53JmIuQp9xkgKM You can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@blackphoenix2837]

@@pioneerelectronics thanks

[@winan1688]

My radio is in russian, I tried to follow the manual, but it is still in russian

[@deckerdotto6035]

What is the model number of your Pioneer in-dash receiver? If you have a Pioneer DEH-S1200UB or similar model, I recommend to remove power from the receiver. For example, remove the negative battery terminal from the receiver for a minute or so, and then reconnect the negative battery terminal. When the receiver restarts, choose the language you want. Or , again if you have a Pioneer DEH-S1200UB or similar model you could do a system reset as seen here: kzbin.info/www/bejne/mGfZiqGdebOogZY When the system restarts, choose the language you want. You can find a full playlist of How To videos from Pioneer about DEH-S1200UB here: kzbin.info/www/bejne/jKeXapmjjNSYhsU and you can find more videos on Pioneer's KZbin Channel here: kzbin.info

[@Kappa072]

How the hell do I connected with mij phone

[@pioneerelectronics]

What is the model number of your Pioneer in-dash receiver? What is mij phone? If you have Pioneer DEH-S1200UB I recommend to use the AUX input. You can learn about the AUX input here: kzbin.info/www/bejne/eGevd6xtesqtjJY You can find more videos on Pioneer's KZbin Channel here: www.youtube.com/@pioneerelectronics

[@tlouphutisecondary1658]

Hi, mine I switched it off and i can't switch it on. It's been a month now with a silent car 🙄. deh-s1150ub

[@pioneerelectronics]

Press the SRC button to select a music source. I recommend to take the face off the receiver and put it back in place. You can see it here: kzbin.info/www/bejne/kGa2kHyribmKjLM If that does not correct this issue, you may have a loose installation wire. Focus on the Red, Yellow and Black wires. You can learn more about wiring you Pioneer receiver here: kzbin.info/www/bejne/oYOVfoJooNx5q8k or possibly a failed fuse in the vehicle or a fuse in the back of the in-dash receiver. You can find more videos on Pioneer's KZbin Channel here: www.youtube.com/@pioneerelectronics