Tutorial: Blender Cloth Sewing - Basic Shirt

[@goreogre]

Been doing this today, so to anyone that's having trouble an their clothes becomes a garbled mess: make you character larger, like 5x times larger, that fixed any problems for me. As a guide, my character now measures at 2.5 meters on the Z axis. good luck!

[@rafone3026]

taking big an tall to a new level

[@spindriftstudio2727]

This helped me too, also turned Max Sewing Force up to 20.

[@danielgoncalves3980]

Thank youu

[@vincentavila8807]

This is the best video on sewing “vanilla” in blender yet!!!!! Great job bro!!! You rock !!!

[@williamrachello3699]

What other type of sewing is there in blender besides "vanilla"?

[@vincentavila8807]

@@williamrachello3699 i meant, with no add on’s!!! 😂 there are other videos that require a add on’s. This video have me quick results and was easy to follow

[@williamrachello3699]

@@vincentavila8807 ah ok makes sense. What are some helpful add-ons that you've seen for sewing?

[@vincentavila8807]

@@williamrachello3699 marvelous designer, simply cloth, seam to sewing, etc…

[@williamrachello3699]

@@vincentavila8807 awesome thanks!

[@FoxxyFantasy77]

I tried to recreate this watching your video….. let’s just say that I need LOTS of practice……

[@mastart4971]

and so do I.... it is bad

[@AndrewMacLaine]

Yeah, he moves REALLY fast and uses a lot of hotkeys/shortcuts. It's not a bad tutorial, but you can tell he's more well versed in this program than the viewer who would be watching it. We newbies will get there, though.

[@vegasboy5931]

So what is it that’s hard to follow? He literally mentions every key he uses

[@saif0316]

@Part-Time Gamer what is this? Commenters on a tutorial not just blindly praising the video? blasphemy!

[@saif0316]

@Part-Time Gamer I just wanna reassure you as someone whose been practicing seriously for the last couple of months .. it will get easier!

[@lynalurex283]

AWESOME TUTORIAL, very well explained and straight to the point

[@ThatElfNerdVODS]

Every time I attempt this, the cloth mesh becomes a garbled mess that jitters and falls apart...

[@SMGJohn]

Then you are doing something wrong, its simple as that.

[@greenlightstudio5302]

@@SMGJohn well obviously his doing something wrong, clearly his seeking help on rectifying the problem

[@internetbeing2086]

I had the same problem, have you tried turning off gravity?

[@internetbeing2086]

recalculate outside

[@midaro00]

worked for me

[@mikebert]

if the shirt doesnt fall correctly, just increase the vertex mass in physical properties of the shirts cloth modifier

[@mon0ghost]

TYSMM

[@Pos44Dami]

you need to add a collision onto the model too don't forget that

[@suerinaa]

I increased the vertex mass the shirt is shriving up and falling away from the model.

[@suerinaa]

nor is it sewing together

[@pbzz_22]

@@suerinaa bending model --- linear

[@Maleduclasse]

you have been extremely clear and linear explaining this, THANKS

[@magutanko]

Hey, thank you for this video! Just the thing I needed, well spoken, explained and to the point. I appreciate it!

[@priyanshurathaur]

where i get this 3d character of human?

[@Buliwyf71]

Nice video, I still haven't tried it. I was wondering, is it possible to make more realistic sleeves? Sewn only underneath, as it is normally done.

[@lyrebird712]

Fairly certain you would do this with something like a cylinder and sew an open portion of it back together. I haven't tried it in blender, but that is how I've done it in Marvelous Designer.

[@elgarnanx]

First, I would like to say thank you for this awesome tutorial. Second, I'm slightly new to blender at the beginner and intermediate level. I want to note few things: at the bottom left screen, it is slightly diffcult to take notes of any key that you have pressed on the video. This tutorial seems to be slightly fast, and it is difficult to follow. You speak fast for a few people to follow. Especially, for people whose English is their second language. I wish you mentioned more about any more obstacles that a user would face during the editing and simulation process. Any common mistake that a user would make during the building, editing, etc. I want to thank you again for this video.

[@xylvnking]

worked perfectly zero issues 10/10

[@AF-ei5yi]

Why cover up the bottom right corner with that banner? Makes no sense.

[@Bordie3D]

Thank you for the awesome tutorial! Also I laughed at the end when you showed us a shirt you made previously and I laughed because it was literally what you showed us how to make lol

[@ninam7749]

Wonderful tuto thank you!!! It helps a lot 🙏🏽👍🏽

[@imanmachukwu6849]

Hello. Thank you for the tutorial. Followed along. Do you know why it doesn't quite "sew" tithe vertices? Mine bring them close but when you go close enough, you discover they aren't touching. Though the cloth sim is working.

[@christinamayerhofer2321]

Hi I followed this tutorial step by step and am pretty happy with the outcome. I have one problem though: the sleeves wont completely fall down onto the arm, the ends of the sleeves where the shirt is sewn together always stays up like a tent. I have already played around with all the options in the cloth pane. anyone got an idea what this could be?

[@alexmaxi1163]

Bro trust me this guy hes not gonna help you he just wasting our time

[@dreamingacacia]

cool tutorial, subbed. Gotta watch again once I got a proper sleep.

[@patrickhaworth7122]

I have followed this and so many other tutorials. I still cannot find how to make my seams as nice. It confounds and befuddles.

[@aa72on]

“Scale him up to a more realistic scale” *proceeds to create 18 foot tall man* that part made me laugh

[@cinderbonz]

Works like a charm. Great tutorial

[@javierlupai23]

It helped me a lot, Greetings from Chile

[@superitgel1]

Hmm. This feels so silky smooth... I don't think medieval people had such luxurious cloth.

[@roachjpg9134]

this was incredibly helpful n straightforward ty!!!

[@fares8124]

Whenever I sew it together some of the stitches are still there, and it doesn't pull together entirely, is there any way to fix this?

[@naramamedowa9564]

the same

[@tarwiswilfred133]

Just extend the mesh outward where the stitches are not completely pulled and inward where the cloth is bulged out. Basically adjust the mesh until it fits the model perfectly, or maybe you want a loose fit, so extend or extrude and where you still see the stitches, it just need more mesh unti you get a proper seam.

[@3kelvinhong]

I found that enlarge both model can make the stitches smaller, under Physics -> Cloth -> Self-collision -> set Distance to 0.001m. Then enlarge your model to 5m tall or 10m tall should solve the problem.

[@manooni]

@@3kelvinhong A combination of both (extending the mesh and setting the self-collision to .001) worked for me. Thanks!

[@blacktalon3893]

I have a question that has me going insane - Why is the cloth sim not smooth, it's super jittery and I can't find anyway of making it right. Does anyway know of a way to make it flow instead of jitter around?

[@yayaskyrim493]

Roughness of the collision objects that your cloth collides with. Try adjusting that, it sounds like it needs to be less rough. Worth a try

[@blacktalon3893]

@@yayaskyrim493 Thanks, I'll give that a shot!

[@roachjpg9134]

i know this comment is old as hell but just in case anyone else was having the same problem (i was too lol) all i had to do was increase the vortex mass! under physics properties > cloth > physical properties. honestly just messing w all those settings can usually get you somewhere if you're stuck lol

[@yhwach1]

can you make a tutorial on how i would recreate outfits from fanarts?

[@bipgtm768]

That was really helpful. Thanks

[@zhmmod_games758]

How to do it the extra part...it keeps not attace to the body and fall apart

[@RustyPeng]

Mine looks awful and I done the same as him, I fixed the issues with gabled mess, but my seams look horrible and it doesn't look anywhere near as natural.

[@vitorborges9117]

man this is life savior

[@tunnis7us]

for some unknown reason my t shirt keeps on moving like wind is blowing it hard it doesn't attach like that at all :(

[@mfrazeehvacc5012]

Great tutorial, Thanks!

[@escherita]

love this. I run linux which prevents me from using CLO 3D, but now I'm thinking "who cares?" What can CLO do that Blender can't?

[@janfehr9122]

I had the problem that when I hit spacebar/started the simulation, absolutely nothing would work. It was becuase my character modell was way way too big, absolutely gargantuan, a realy big boi. So I scaled it down and it worked. Maybe this helps someone

[@losersbrand]

Was looking for this comment , did you scale the model only?

[@ArtSurvivesArtist]

This is one of those times if I had someone to talk me through it I would do much better. I was stumped as soon as the video started when I noticed that your version of blender is different from mine. Mine being 3.6. Right from the start I couldn't get my gridlines or the plane to be the same size as yours. 2:22 after mirroring the plane, it won't split into 2 when I hit G and then mouse to the right.

[@loganfairbairn4605]

Starts at 1:32

[@SilverMouse810]

I’m attempting to edit a vroid model that I accidentally made too revealing in the clothes 😢and almost got banned from twitch because of it!! So I want to learn as much as I can to make clothes for my avatar!

[@ForeverToronto]

you did go a tad bit fast, I pressed space and it went haywire

[@TheSimsAlina]

can you fix the mause and keyboard clicks on the screen. By the way, I would like to see more of your video content. health to your labor.

[@TheDedictvi]

homeboy could slow down a lil so I dont have to dissect the video frame by frame and even then be confused what kind of shortcuts you have used

[@jacksonlamme]

im sure its much easier 1 year later

[@TheDedictvi]

@@jacksonlamme my adhd ass lasted two days until I gave up on blender. One year with this might as well be impossible 😂

[@jacksonlamme]

im suffering through the beginner phase of blender (for the last month)

[@BinaryEmyaneh]

Thank you

[@Prostudios_]

Nice tut ❤

[@spyrozz_6999]

Thank you ❤

[@loewi9223]

8:14 if I hit the space bar there, my plane does not collide/collapse down, and it does not form itself into cloth either. what step did I miss??

[@3kelvinhong]

Did you set 'cloth' modifier for the t-shirt? You also need to set 'collision' modifier for the mannequin.

[@loewi9223]

@@3kelvinhong yes, I did all those steps.. problem might be an interference with the arms. Will figure that out after retopologizing!

[@denniz8423]

@@loewi9223 same problem.. any solution yet?

[@BadNessie]

@@loewi9223 I just found out it seems to make a difference HOW you apply the modifier. I couldn't make it work neither. It only worked when I clicked on the cloth button directly in the physics section. When I used "add modifier" and selected the same there it wouldn't make it work for reasons unknown to me. Hope this makes it work for you, too!

[@BadNessie]

@@denniz8423 I just sent a reply in this comment thread, *maybe* it's helpful.

[@bek8796]

it doesn't work for me when I enable sewing. In general, when I add a cloth sim to the shirt it doesn't fall or move at all, just stays in place I checked if I was still in edit mode and made sure everything was correct, but it just doesn't work or snap together

[@samuelusifo8046]

Same

[@suzanneslattery219]

It worked for me when I played the simulation.

[@Luka1180]

Couldn’t we do the same using actual drawn sewing patterns made in vector graphics (.SVG files)?

[@IVThesimple3436]

The plane isn't extruding backwards for me is there something I'm missing here? it only goes up and down and side to side it won't go forward or backwards.

[@PatriciaGonzalez-ey6hs]

Love your videos!! Thank you!!!

[@keepinmahprivacy9754]

can't get past 3 minutes into the tutorial, because after i extrude the face, when i try to rotate it, the entire mesh wants to rotate as well and there seems to be no info on the web about how to stop that without adding hooks or something that you are obviously not doing

[@mizuki_thegamer3905]

This video is so nice but I haven't try it yet so I will try it out later. Btw I have a question regarding the cloth, will it became the separate one or the sewing one after the model being export?

[@MrReactric]

how to fix connection line problem. (hard edges)

[@lordofthelair6716]

When i added the mirror modifier the object didn't duplicate.

[@DeadAngel74]

make sure your curser on blender is in the very middle and you have to be in edit mode so you move the mesh not the object, also to make it touch when it goes back in you have to hit the little box that says clipper after you have moved the boxes apart.

[@videorowtv5198]

It doesn|t work, it goes straight throught the character :(

[@AnabolicStudios]

did you add a collision to the character? that might help

[@videorowtv5198]

@@AnabolicStudios Yeah, I did

[@totila42]

It does not work, results are fuzzy. I miss information details. Result depons on what ? Polygon count, sewings number, position ? I get stretching issues every time

[@AndyKnudsen]

I can't get this to work. The cloth wont fall, no matter what I do. Do I have some switch turned off or something?

[@NL11224]

What about if my model wasn't in T pose?

[@favkisnexerade]

im trying to make clothes once a year but no matter what bledner version I use its always wrong for me. Close that looks like plastic, its stiff, lots of bugs at sew areas, etc etc marvelous designer works 1 to 1 as in tutorials IDK whats wrong with blender

[@josephjoestar6098]

When I put in the cloth modifier it stays still and doesn’t fall. Then the sewing doesn’t do anything. What did I do wrong?

[@nattvandrarn1]

How would one go about making an open jacket? if it's mirrored i cannot edit the back without the front closing :I

[@Crgb777]

Apply the mirror once satisfied with the cloth sim appearance. Then in edit mode split (Rip) the center edge down the middle.

[@zefsam]

Awesome video!! Quick question how can I make the cloth follow my character. My collision is ag the very end and still stays still

[@lemon1720]

Parent it?

[@commandoslayer]

How can I render the cloth soft texture from frame 1?

[@Stillcrown239]

I made pants, too! Are you proud?

[@justinlawler420]

Hey quick question! Do you know if this will transition into Unity for VR avatars or for characters in games? Awesome videos! thank you

[@thenotorious8382]

you can apply the cloth from the modifier screen after ur happy with the end result

[@foughtwolf]

How the hell do you even get the model into Blender? Im trying to pull an FBX from a Unity package via export and import and it just turns into a horrific spaghetti monster.

[@naghm8180]

The only helpful video

[@gothex8305]

for me the shirt is not falling someone now how to fix? edit: when i set Bendig model to linear then it kinda work

[@stoicservant4017]

thx for info. it worked for me too

[@november2500]

thx! 😄

[@almuayidulislam]

Why does the shirt sag even after applying stitch modifier?

[@jine7123]

The long dress im trying to make, the straps over the shoulders keep falling through the shoulders when I simulate.. Pls help

[@bruhmoment1835]

Turn on collision for the character mesh?

[@danielbrugovsky6018]

"Get it to realistic scale." Proceeds to make a 7 meter giant.

[@Geremia08]

You should show your keystrokes for those new to Blender.

[@PIXXO3D]

Bottom left of the screen.

[@Geremia08]

@@PIXXO3D Oh thanks. The text blendered in. 😄

[@TPXStranger]

Hi! Thanks a lot for the tutorial. But does anyone can explain why it's so necessary to have t-shirt mesh consist of almost even squares?

[@BadNessie]

Hi, I'm *far* from being an expert but from what I understand it becomes relevant when applying textures or color patterns, especially when painting on the surface. I can't quite explain it but at that stage it becomes important so it makes sense to take it into consideration very early on. The further you get into the project the harder it becomes to readjust it without messing with a lot of other factors you've already put work into.

[@TPXStranger]

@@BadNessie sounds quite reasonable! Thanks

[@CritelliArt]

The simulation is based on the topology. So if the squares are wonky your cloth simulation will be as well.

[@samuelarya1625]

how did you do that at 2:42?

[@SevannM]

Press E to start extruding the vertices, then drag the mouse up, and left click when you're happy with the positioning.

[@Disembodied]

does anyone know how to elongate fabric? I have a hoodie in blender but i need to make the sleeves longer, sos

[@attachaiarrayayarn8219]

wow so awesome😍😍😍

[@SpensPens]

any tips to reduce clipping between the cloth and body?

[@Zro3e]

mirror modifier doesn't work like it it does in the video

[@hevinnelson2741]

Can I download a cloth from online and just slap on a cloth modifier

[@spencermckay8222]

I hit spacebar and mine crumbled into a ball and then fell to the floor. Don't need that.

[@TheRandomDude1011]

yeah when i press the spacebar it refuses to turn it into cloth so

[@lamarfelton8465]

Hello, still beginner in Blender, where do you have the 3d human model ?

[@johnnyzzzz]

Mine doesn't work it just crumples into a ball and falls

[@guggiman7197]

I followed every step and the shirt just crumples up into a ball

[@kingdoom1906]

I’ve question where i can get that basic character shape?

[@mo7sin711]

the shirt keeps falling instead of sewing 🙄

[@skilat193]

I follow every step but I can't understand why it's not doing the same...

[@barackyunus901]

me too

[@skilat193]

@@barackyunus901 I finally succeeded simply by changing the collision parameters in the garment's "clothe" modifier and in the mannequin's "collision". I decreased the distance to 0.02 and slightly increased the "skinwrap".

[@OoonoTv]

It just never seems to sow properly for me.

[@motaz-cx6ei]

at 8:30 i did the sewing option and it did shrink but it didnt stop at the character figure it kept shrinking and falling i hope you tell me why

[@nvanityxv5756]

this no longer works something has changed can u make an updated one?

[@LambVisionStudios]

cant seem to get it working right on higher poly models

[@arayaentertainment2024]

Bro, how do I leave the shape of the clothes without having to put the animation? I want to leave it with the shape

[@a_leafdanial1181]

apply the cloth at the modifier tab

[@TerickLamontVisuals]

Do you have a video on all the hotkeys you are using? Im going to look for it.

[@ByTheGrace0fGod]

If you follow Blender Guru's doughnut tutorial, you'll learn the main ones easily. If I recall correctly, for Blender 2.8, he even made a PDF with all the hotkeys.

[@JustinThorLPs]

how would i use this if i was intending to make a model for 3D printing?

[@LostKitty64x]

this doesn't work the cloth never collides with my mesh

[@kitsunekid2417]

hey i was wondering how you'd add like pngs on to it, because of the mirror modifier whenever i try to put something on it doubles on the front and on the back. Im using Diffuse BSDF and image texture for the colour, when in textures

[@shabasnft6878]

I just had the same issue. If you apply the mirror, you can add the image and it wont be duplicated on both sides. i just save a template for the mirrored shirt and then when im ready to make a sure with a design, i duplicate said template, apply the mirror, and then add the custom textures

[@dacarly1330]

why use so many shortcuts?

[@VOZAlberto]

I added the mirror modifier but it doesn't make a another one, I moved with G but there's only one.

[@ByTheGrace0fGod]

The mirror modifier works along the local axis of your mesh. Be sure to have the good one enabled. Also, check your origin point.

[@poosay8211]

Which blender version it is?

[@jaectrgames]

hey i have a question, can we export this as a package file?

[@Mina_0098]

I wish I could do this to make lots of clothes and other things in Zepeto and earn money in real life.