Tutorial: Blender MODELLING For Absolute Beginners - Simple Human

[@souperchicken9395]

I accidentally figured something out, holding ctrl snaps stuff into place and its incredibly useful for precise stuff. Just a nice tip I'll leave here for beginners

[@joshcaladia]

ctrl+shift gets even more precise

[@kurayami1]

top middle you can also select what you’d like to snap it to: increment, vertex, etc

[@joshcaladia]

@@kurayami1 and if it's being a little weird, you can always right click and manually snap the selected vertices

[@souperchicken9395]

Hope I've helped some people out :) Also thank you to those who have left more tips here

[@ballsofsalsa01]

Alt+F4 also smoothes the sharp corners, very useful

[@EngineerMan]

Perhaps the biggest piece of advice I got from this video was to use orthographic views more. My model still turned out like a potato, lol, but it was less of a potato than the last. Progress. Good video, thanks.

[@properpooper157]

You went from a potato, to Mr.Potato.

[@Aadstar16]

Engiere men lmao

[@Aadstar16]

Not roasting*

[@TJBlack3.5]

Basic Potato -----> Advanced Potato!!! (Achievement Unlocked)

[@MaxElterman]

POTATO!!

[@jalensworld7241]

After 6 1/2 hours of working on the model, and having to replay it back and forth because I'm slow at learning, I have finally completed my first human model. Thanks for the tutorial Pixxo. Also you taught us how to make PS1 models, so extra points for you.

[@AmShibes]

Huge W, congrats!

[@guywithtoyplaneDP]

I took a break at 22:54 my head was hurting soo far i did decent even though it looks like a water downed version of this

[@chillmusicvibeoutoftheworl1061]

well you could watch the tutorial on your phone and do it on the comp ryt...tip for next time

[@polyaplus]

I am 34 years old, i never thought i can sit in a room and understand, with 98% precision, how to do this. Thank you Pix, you are a Genius!!!

[@_codeFrost]

Thanks to this dude I finally learned how to use blender. My eyes have been open to new horizon.

[@zurielbaxcajay2559]

First tutorial I actually followed through. My model didn't come out as good, but a great learning experience overall

[@CarcharosPaleoAustin]

Me, too! Mine looks like a weird human alien something. But who cares!! If it’s good in your eyes, it’s good.

[@ballsofsalsa01]

Have you had the problem where every action creates new surfaces ? Like rotation creating an extrusion? I try to rotate the upper surface but it ends up creating a new surface instead of moving the original block itself

[@Yo4thesha]

It's ok man, mine came out looking like it just escaped the SCP foundation

[@robertpertuit9530]

@@ballsofsalsa01 Ctrl Z will undo your last action as far back as you want, so you can tr again.

[@OneHandMedia]

@@CarcharosPaleoAustin 🤣🤣👌

[@daveybalmer]

One of the crispest, most concise and worthwhile videos on Blender. An awful lot has been packed into just 35 minutes to provide a foundational experience in Blender. Just hope that PIXXO 3D keeps coming with more of the same for lighting, camera and animation [if not already there]. Great job - thanks.

[@teineone]

Or rigging. Rigging's good.

[@dudeman1305]

@Andrew Sullivan SHUT UP

[@iwishiwasachimp]

@@teineone If you can recommend any good tutorial videos/channels for Blender rigging, I'd appreciate it! I'm more interested in rigging/animation than modeling.

[@teineone]

@@iwishiwasachimp I got nothing, that's why I was saying rigging. I was having trouble at the time with this kind of problem, but the application resolved itself by disappearing so....

[@cindell7081]

As a beginner, I was actually able to follow this tutorial, and my first model was ok. Thanks for sharing!

[@StonedAKhana]

hows the progress?

[@wespicedmemes]

@@StonedAKhana fr

[@stealth2338]

@@StonedAKhana whats up bro hows it going for you??

[@ravynwoods5902]

Who is following but can’t keep up without pausing and rewinding 🤚

[@LaynaStambaugh]

This happened to me a LOT when I started using tools like Unity and Godot. Just keep working on it and pretty soon it'll feel like the TEACHER is trying to keep up with YOU! ❤

[@stuicide]

slowing down the video works for me

[@modekaithegoose]

😂😂me

[@AbigaleWalker-h7s]

Same. It’s not a bad thing, but going slower would be helpful for people who have never opened up Blender before

[@rxdmxsk]

I couldn't keep up while pausing and rewinding 😭

[@maltion9097]

This is the only tutorial that managed to teach me how to use blender. Majority don't explain things that they think that are simple but for beginners we have no idea.

[@terrencemcgee2836]

10:08 modifiers 12:10 wireframe 17:04 cuts 19:08 Hand extrude

[@Griddy543]

Really useful.. Thank you

[@kama28593]

excuse me while your comments left here 2 year ago, if you or someone watch this video and understand what i said let help me solve this problem in Hand Extrude, i do like Pixxo teach and it work normally to step Scale extrude hand, like he do when he scale Face mode it affect only extrude extend he drag but when I did it scale all cube not like he do, what exactly wrong of me and how to solved it? Thanks

[@MBHeritageFarms]

thanks for this

[@li_tsz_fung]

I've been thinking about 3d modeling for nearly my whole life. But never get pass the primitive meshes. But your tutorial is so beginner friendly and we end up with an model that looked not bad. A character, not a chair. That's amazing.

[@yutupedia7351]

same here 😂

[@FundipDev]

relatable with the character not a chair part. lol, this really helped

[@ahmadbaihaqi1839]

This tutorial was simply amazing! I've honestly been watching multiple 'beginners' tutorial before even trying blender. But yours is the least daunting and scary, never would've thought that my first ever creation would turn out to be this great! This was such a great start to learn blender, thank you for the tutorial!

[@chaydensplatberg8889]

Yeaah, this was a good one. I’d also suggest the beginner donut tutorial by Blender Guru, as that one was my very first and has helped me a lot. It’s been really fun, too :-)

[@imir_]

I like how you absolutly care about us and how you make everything so we understand.

[@scrunky8683]

🥰

[@leefaegaming1285]

I love how this tutorial is simple and complete enough for everyone to understand ans yet doesn't makes us feel like someone explaining things to a child

[@unknownuser8454]

ok lmao

[@dinoboy_yt2209]

ummmm i dont understand shi-

[@YarMythic]

I've been messing around with different modeling techniques from different tutorials, this is by far the best and my first attempt came out so well that I've been able to generate base female and male models for my game that I can use for the various player and NPC actor models. I'm a game designer that wants a specific look I can't find out there, people seem to really struggle with faces in particular, which is understandably difficult. They're either too cartoonish or super-realistic but with malformed features. I'm coming over to the dark side and learning to do all my own models and textures so I can get that blend between cartoon and realism. This was a huge help. I was an anatomy student some time in my past, so it's all just a matter of learning on this new medium. Thank you!

[@nabnab9]

Can we see a trailer or an alpha footage maybe? 🤣

[@juice_mangaming7217]

What type of game

[@Savi-digital]

What dude said, how about a trailer of this game?

[@Savi-digital]

Do you do teachings? I want to create a human male character for my game, i don’t have discord though or a PC yet but i will, I need help with ideas.

[@RicardoMetring]

> "blend between cartoon and realism" This is exactly what I'm looking to acomplish as well.

[@12kenbutsuri]

Best tutorial for someone who never touched blender so far.

[@amandacrisp14]

Strongly agree on this

[@Ara-ot2yq]

This actually helped me so much! I feel like i could get blender to be a good friend of mine. I really want to do some simple animations and i am very much willing to put a lot of time and effort into it. Thank you for being the first step of my journey. ^^

[@elcreyo]

It's been 5 months. Are you still messing around with Blender?

[@AnonyMous-ql9nj]

@@elcreyo from the silence ima assume she dead

[@pedokillla]

May I ask how it’s going?:)

[@samuelljayy6705]

Give us the tea sis

[@stealth2338]

hey were you able to do the simple animation? id like to see it, hope it went well for you

[@XiphoidVR]

I've been trying to learn blender for ages and this is the only tutorial that has gone been interesting enough to watch more than 5 minutes. Thanks

[@rubencouto4865]

Man, you are a teacher. I see many tutorials there just for vanity "how cool i can handle with this with my special bought plug ins". But you show all the steps!!!! Thank you!!

[@Muhammad-Jacobs699]

I recently learned all about 2D Character design with the intent to finalize my art in 3D sculpting using Blender. This was the first tutorial that I actually tried to apply everything I've learned on characters. And WOW I went a bit wild here on creativity but the result is absolutely amazing thanks to how simple and straightforward this tutorial was. Great success!

[@ButWhyMe...]

I'm only here to take a shortcut in learning 2d. I'll model my character, rig and pose them, then simply trace.

[@Salad006]

I've wanted to learn 3d modeling for ages, and this video had made figuring out blender incredibly easy. Huge thanks man, you've done the world a great service

[@wrennybih]

this actually really helped me with something i've been working on. I didn't really follow the whole tutorial but i used what i had learned to make a pretty good looking table for a vr chat world i've been making. thanks so much :)

[@wonkiebruh3690]

At 16:10 after selecting the face of the object click on the 'Move' button on the left side of the screen OR press G which is easier, and that is how to drag the legs, you're welcome to anyone who needed to know

[@ionawoods1410]

This didn't work for me, just added another block on the end of the legs, whereas I just want to extend those same leg pieces down

[@tonybones7858]

This is the best Blender beginners tutorial I've found, and I've been looking. It was explained well for someone who's never done more than make a very ugly ball of bumpy digital clay. I only watched it this time around but I learned so much terminology and so many basic hotkeys for this stuff. First thing tomorrow morning, I'm throwing this on again and following along. Fantastic video! Thank you!

[@JustGeorgiaxD]

Low-key hypnotic to watch, this has helped me so much already, I can’t wait to put what I’ve learned into practice! Thankyou for the video!

[@rennicles]

You got brainwashed into learning how to model

[@adog3129]

For anyone else getting confused when the mirrored object doesn't show up: make sure you're in edit mode before you move it!

[@Shinirkrog]

My ADHD having ass couldn't for the love of god figure out that detail, thanks!

[@adog3129]

@@Shinirkrog no problem :3

[@haphazardv4lles961]

thx

[@dave2171]

i spend 2 days to find that out

[@Yuannayah]

bro i was about to release a wrath of my anger until i saw this comment thank you 😭😭😭

Thank you man, I created my first alien monster by your help. It's exciting.

[@AnimalQuestGaming]

i didnt watch the whole tutorial but i learned the half of the blender with just a simple tutorial thank you for that :)

[@HadiAriakia]

Just started learning Blender for fun. but I am not totally newbie, I used to use 3dsMAX when I was young. Found this video actually very nice, does not talk too much or trying to be funny like many others. Just going through the main points. Good job mate.

[@dianecollins6674]

I knew nothing about Blender and needed to create a figure. Thank you so much for this great introduction.

[@thelonecabbage7834]

22:49 That feeling when a low poly model has better dance moves than you.

[@bludoggo]

I love how as the guide goes, the you explain, the fact that i still understand is the best part, meaning the guide is helping.

[@creepermods4641]

I have no idea what i have done...

[@leongeorge9626]

One of the best Blender tutorial I've watched. Mostly nicely done. The exception is the ad rectangle blocking the view of what occurs in the bottom right corner of the creation plane.

[@flarethorn7833]

ya, what is up with that? Its annoying and in the way.

[@solo8734]

Solid tutorial, kind of hard to follow more advanced ones from other creators when they don't have the time to tell us how they do every little thing. (selecting faces, increasing/decreasing scale, etc)

[@ApollosDagger]

Thank you so much! I’ve been using Rhino for a year at university so I know a little bit about 3D modelling, but since I can’t afford Rhino , I’ve been looking into stuff like Blender. This helped so much in getting started!

[@nabnab9]

What the hell is rhino??? 🦏

[@kidssnyder9680]

@@nabnab9 a 3d software

[@3LegendaryIdiots]

I am very exited to say that this worked perfectly and it only took me 1-2 hours to complete! I am happy to see you teach the person watching while they build said dummy along the way!

[@SageofSteel]

That right there was a quality video. I went from 1 hour to make a simple pyramid to less than 30 minutes. Good stuff.

[@projectotaku3764]

It's really helped me a lot. Thank you for this wonderful tutorial

[@andresantos3487]

16:11 How do you drag the legs like that? i couldnt understand that part

[@andrewmcinnis5942]

Im having the same issue

[@Snekfor1]

Same thing here

[@sweetpantsproductionsjazzy]

This is very late but for future viewers, he pressed G

[@wonkiebruh3690]

i dont know if you figured out or what but im going to post an answer for anyone to see, after selecting the face of the object click on the 'Move' button on the left side of the screen and that is how to drag the legs

[@ionawoods1410]

I'm having the same issue, the move button doesn't do it the way he's done it 🤔

[@mr_whyy]

This is one of the best tutorials I've seen, all domains included not only 3D, thank you !

[@mattshroom33]

If you get stuck when trying to rotate remember: mesh - clean up - merge by distance. This is caused by hitting escape after extruding without hitting ctrl+Z to undo. Escape makes extra vertices for whatever reason.

[@xx1219]

Was stuck on this, thank you!

[@Drewmunee]

This comment saved my life! Thank you!

[@Derekstefan]

I was scratching my head as to what caused the extra vertices while following this tutorial. Now I know why. Thank you.

[@damiengates7581]

That doesn't help though... it rotates the face without the other faces attached...

[@sigmathanos5030]

And the legend strikes again!

[@aswanidivi4385]

Its 3.04 am. Just finished watching. Your efforts are quite appreciable. Subscribed. And waiting for one more model to learn. Tq

[@gibsonsimpson]

Thank you for this tutorial. I wanted to learn how to use Blender for a long time. I have made my first proto-human in Blender thanks to you!

[@marik996]

This is literally the best tutorial for beginners on blender i have seen tysm

[@Starr__Dropp]

I was super scared to get into modeling because of Blender, but once I started watching this, Blender became much easier to figure out and use!! Recommending this to all of my friends!

[@jackflex2919]

First time ever using blender, very well done guide for getting through a first time users project.

[@ppunz]

8:58 is pretty much where the tut starts btw

[@maybedizzy]

tysm

[@Atte_Rios]

Woah! My first model and it's so incredible, with this tutorial you can do almost everything you want

[@sorenspunkt5374]

Very good video! I'm a programmer trying to get into modelling and that's exactly the level I needed. Despite knowing the most used tools, mentioning the shortcuts is great. Thank you ❤

[@ellencaroline8143]

At the very first time I was able to modelling a proper human figure following your tips. Thanks a million.

[@ogcrains]

at 22 minutes after spending 2 hours and my character isnt as good but ive learned alot going to re watch and re create till my characters are decent looking and not so fat lol! thank you bro very good tutorial 10/10

[@starsintrash9218]

This is my first creation other than a table!! Lol thank you!!

[@_Prismatica]

This was awesome! The only big issue I ran into was when I was trying to extrude the thumbs. The geometry kept morphing inside itself at odd angles and came out extremely flat, almost 2D. No matter what transformations I tried it just kept twisting itself in strange ways. I tried going into x-ray mode to see if I had accidentally created duplicate edges/vertices (something I learned from another tutorial), but had no luck fixing it. I imagine this is something I'll figure out with enough time in the program. All in all you made this process a lot less daunting than I thought it would be. I'm excited to practice creating characters and to broaden my artistic abilities!

[@j3ffn4v4rr0]

it sounds like what I was experiencing when I was trying to scale a couple things...if I'd move the cursor too far, it would invert on itself and look really weird. I think it's because I was too zoomed out, so tiny mouse movements go farther than you intend...it helped me to zoom in closer to the item I was trying to affect.

[@geschnitztekiste4111]

Try holding shift to have more precision

[@wanderingjadah]

Me too! I just figured out that if I press E then press Z it let me extrude but then it was flat so I then selected the faces on the top of the thumb and G to move them and now my thumb isn't flat anymore. That's probably not a real fix but it worked.

[@bobl703]

I have the same problem.

[@Agent505]

This is very useful for someone who thinks they know 2D design in something like Photoshop but is overwhelmed in 3D space. Appreciate the use of hotkeys and manipulation too.

[@Vinxster]

Thank you for this tutorial! It was basic, and as a beginner to blender myself, this was really helpful and understandable unlike most tutorial, who use multiple different fields, modifiers, (etc) without even telling us what they do!

[@mathewporter09]

Far more useful than making a donut.

[@Kriza_]

HAHA I KNOW YGAT VIDEO

[@NOTAHEK]

Blender guru

[@princekyle4132]

23:10 I keep getting tripped up here. When I hit the face and shrink it, it ends up creating a middle face, not a face that takes up the middle and left portions. When I try to proceed with the extra faces there, it just leads to a malformed mess.

[@JayVariety]

Great tutorial! My first time at blender at and I managed to follow it and make a decent model

[@teethofdiamond]

When i got my current laptop, i told myself that one of the first thing i was going to do with it is learn 3d modeling. It's been over a year and i'm just getting started. It's crazy how i procrastinated for so long on something so easy.

[@rockhertodeath]

I made it 12 minutes in before I gave up. I love these speed build tutorials!

[@Gamewithstyle]

I have done plenty of hard surface modeling for props and 3D printing in Blender but never any character stuff. This is such a great tutorial, and it's awesome to jog the memory if you haven't been doing anything in blender for a few months. Good stuff.

[@GameN3rd]

This tutorial is so, so good! A one shot to help people realize that blender isn't all that hard, it just takes practice and understanding the tools at your disposal. Just off of this I've gained so much more confidence and a better sense of direction within the software and I'm excited to learn and progress. Thank you for helping so many people!

[@dylanemusic]

Does he even realize how great this tutorial is? I had no idea what to do and after 30 minutes I can finally do my own projects.. Huge thanks to this guy

[@momentiummonroe1475]

This really helped me understand the tools in blender way better. First recommendation video for getting started

[@irfaana.b.6707]

wow, I learnt a TON! Thank you. I think this would be a perfect tutorial for beginners as it touches a lot of the basics tools... With this and a little initiative to experiment, you can basically propel yourself forward into other potential project ideas. Lovely!

[@JosephDiazClimbs]

This was such an incredible tutorial. Such an accessibly way to get into modeling, the low poly format had me encouraged to continue modeling additional details afterwards. You explained it all so well and concisely!

[@jakobanzengruber8688]

Thanks for this very well explained tutorial, it was definitely worth watching it! Thumbs up!

[@CosmoJaeger]

This is by far the most useful introduction to Blender i've found so far. Nice pacing, great that you repeat and speak out loud what shortcuts you use. So many others just roll on out there at 200 kilometers an hour, expecting people who have never used Blender, to catch on to the fact that you used a 40 key combo to do some crazy stuff.

[@AyoTed]

we all have our preferences

[@harcikeszeg]

I used that video with 3.X and still perfectly works! Thank you so much for this help! 🙂

[@artchara633]

For some reason, this is easier than the donut

[@Hi-qr5vn]

I hope no one did the same stupid thing as me and end up setting the subdivisional surface to level 100. My laptop was not able to restore the model.

[@drpaperbag6405]

This is a fantastic tutorial thank you so much for making this, this has taught me so much!

[@Hydranyx289K]

This actually helped me A LOT surprisingly, considering the many tutorials I've skimmed through, this one takes the cake in my book

[@stubbywubbyz]

Thank you One minute in I’ve sculpted a head shape Which I mainly have done by looking things up and exploring the app But I’ve sculpted a head shape and I am proud

[@vexan7435]

*sees there isn’t enough r34 of a character* “Fine I’ll do it myself”

[@jimsyfool4335]

absolute champion

[@sexypanda1349]

he knew why i came before i knew i was coming. How did you achieve such power?

[@chaosmastermind]

Bless you my child. -The Minister of Perversion

[@midgardrichard]

Very clear and concise tutorial! I was able to follow along with every step, get a decent looking result and an understanding of what I actually did to get to that point, thank you!

[@BallisticWolfey]

im so lost, every time I try to do the thing at 13:42 it makes a new thing instead of staying attached.

[@kubacakagoomba]

Same here.

[@kubacakagoomba]

Nvm, I just removed the cube altogether and created a new one, started all over and then it worked lol I must have pressed something by accident, dunno what though.

[@Cassthetic_Art_Official]

Thank you so much!!! this video really helped me make a character model for the first time and now i feel ready to start making character models

[@HitBlank69]

underrated tutorial, honestly created the exact thing he showed by following the steps and I feel confident that what I learned will stick into my brain, thanks for going slow and explaining what everything does

[@annabxth]

words can’t describe how thankful i am for this!! you’re such a life saver!!

[@sungyle]

Thank you for an excellent video. I am almost 80 years old and bland new to this. When trying it out on my just downloaded Blender, I made a lot of mistakes. So, the questions is, when that happens, how do I return the cube to it's start up form and position so I can start over again without having to quit Blender and start over? I noticed that in your video, you can rotate the cube many times all over, or move the cube way out, then, suddenly, you are back to it's normal position and continue with your lecture. How did you do that? How can I do the same? Sorry to trouble you.

[@NM-wd7kx]

To undo an action try 'ctrl' & 'z' at the same time, this should work across most of windows. There are lists of hot keys out there, but my advice is to go through the donut tutorial (it's also on youtube), it's much longer, but he teaches you more of the hot keys & quick tips at the same time. Good luck

[@GroupOfLumber]

video starts at 10:15 make sure you have edit mode active btw

[@GroupOfLumber]

and if ur on laptop click view, viewpoint and just do the action he said

[@TristanMC11]

how do you just extend the legs like that!?!?!?!?!? at 16:05

[@wonkiebruh3690]

i dont know if you figured out or what but im going to post an answer for anyone to see, after selecting the face of the object click on the 'Move' button on the left side of the screen and that is how to drag the legs

[@panthera1529]

@@wonkiebruh3690 that's not what he did tho

[@josephmerrick58]

I learnt more about how to use Blender from this video than from all the other tutorials I've seen combined. Great work.

[@LayzLizard]

8:58 is when it starts

[@apersonathome]

thank you vry much

[@TarickTheDemonSlayer]

I dont think you should underrate this tutotial. This is one of the key tasks to start with as an indi, and even with prior experience in 3DS max, this was just what I needed to get on track with blender and build a prototype model but more importantly get familiar with hotkeys etc in Blender. The only thing I really wanted that you didnt cover is how to cut a new line in accross a poly, as in just 1 cut. Im sure Ill find out soon enough, but to take your model to the next level, you need at least this just to cut in custom geometry. I suppose this might confuse new modelers however, as then you need to think about topology. Anywho, thanks so much I really appreciate it. Where do I send my donation HAHA

[@TarickTheDemonSlayer]

oh we could use any updated version in Blender 4.2, not sure if anything has changed but man would really appreciate that.

[@Ethorbit]

Thanks, you did a pretty good job of explaining this. The previous tutorial I watched wanted me to make each body part an individual mesh and half-way through I didn't really feel comfortable with that, but this video showed how to use a single mesh using mirroring and extruding, which seems to be a lot more effective; this makes modelling less intimidating.

[@Yazoon_S]

hello . thank you so much for this amazing tutorial , I was overwhelmed by this program, and couldn't open it for a long time, but now I finally decided to do and follow your tutorial and I managed to create something, thank you very much the only problem I faceed is that sometimes (only sometimes) , after scaling an edge or extruding, I see that additional vertices are being created which messes those parts, I might be adding them by mistake , but do you know a way to avoid that?

[@toddg5966]

I ran into this problem kinda often myself and I think I have narrowed it down to what causes it for me and a solution to avoid it. So, for me, if I try to select a face the way that he does by just clicking it I am able to. However, when I try to extrude, move, rotate, or scale that face it creates additional vertices and edges that are unexpected. The cause for this from what I have noticed is because when I click to select the face it selects just that, the face only. What it does not select is the edges and vertices so that they extrude, move, rotate, or scale with the face. It caused me a bit of headache until I figured it out but for me the best solution is selecting with the selector tool in the form of clicking and dragging. Later when I get into more detailed work and such this may become a problem but I will find a solution then as well.

[@Yazoon_S]

@@toddg5966 thanks a lot for the info ^^

[@toddg5966]

@@Yazoon_S I actually ran into further problems and found the true cause. When you go to extrude but change your mind it still creates an extrusion although it is invisible. What it actually does is it moves the extrusion point, which is the face, away from the edges. If you are in Wireframe mode with face select on you will notice black dots on the edges and centers of faces. This is not normal. The black dots should only appear in the center of the face so to fix this you can select everything (hotkey "A") and either hit hotkey ("M") for merge or go to the Mesh at the top of edit mode and hit Merge and Merge By Distance. Another alternative to fixing this is going to the Mesh menu and clicking Clean Up then Degenerate Dissolve. What these methods do is eliminate zero area faces and bring them to the proper edges. I ran into one edge that would not Merge By Distance so I had to Degenerate Dissolve it. Also if you notice 2 or more dots in the center of a face you have a duplicate face and this too can cause issues. You can click the dots and delete unwanted faces.

[@Yazoon_S]

@@toddg5966 oh!, extruding does happen even if we cancel it? , interesting! I see, thanks A BUNCH for your help, I screenshot your solution and can't wait to try it soon ^^

[@toddg5966]

@@Yazoon_S Its confusing that extruding happens even though it is cancelled but I am sure it has its uses. You are welcome though. Hopefully everything works out well for you.

[@pl3ys_pandra906]

Why my human is so strange xD. It's so difficult to have good proportions when you start blender. My guy seems to have a shark fin in the back his definetely not a human ! Anyway thanks for your tutorial.

[@fattmeows8868]

hehehehehhe

[@chesterdesmond666]

Great tutorial! Very clear and concise. Thanks! If anyone has issue with being able to select rear vertices with lasso, click double box in upper right to enter x-ray mode.

[@milestaylor2148]

Best tutorial on youtube ever! Still perfect in 2024 as well, instantly subscribed and will be watching more :D

[@TheHalfwayHero]

When trying to hold Shift+Alt and select the knee as shown @22:40 it seems to create a new set of vertices that won't merge back with the original, so when I try to position them, it is more like it is extruding. Not sure what I'm doing wrong.

[@moe1965]

same issue

[@akku1313]

As an absolute beginner, thanks for this tutorial, it was great and easy to follow along

[@tab7302]

Спасибо, наконец-то гайд который действительно объясняет нужные вещи

[@fortinder3870]

This guy is the best teacher I have seen on KZbin

[@amongsus4278]

Best tutorial ever I'm a beginner and all the other tutorials are very short and low-detailed

[@hatcactusofficial]

This is not for beginers very complicated

[@morganmorrismedia]

He actually made it a lot simpler and easier