Successfull Experiment || The Most Unexpected Process Of Broken Top Gear Input-Shaf Repaired…..

Рет қаралды 324,789

5 ай бұрын

Successfull Experiment || The Most Unexpected Process Of Broken Top Gear Input-Shaf Repaired…..
#succesfullexperiment
#MostUnexpectedprocess
#TopGearinputshaftrepaired
#pkprocess

Пікірлер: 95

@robertoruiz7069 4 ай бұрын

This is SKILL ,plain and simple.I've used a lathe on hardened steel and i've repaired cars during my lifetime.And as a well rounded all around FIXER,this guy is way up there in the job he does.He may not have learned the BOOK way on heat treating and steel PROPERTIES,and it looks like they only use E6013 rod,but i have to hand-it to this channel they show what can be REPAIRED to get a truck back on the road.great video guys

@PersMachinist 4 ай бұрын

Wonderful work and beautiful workmanship to all the way thank you.

@nikolaos9906 4 ай бұрын

BRAVO PERFECT WORK Congratulation

@582ChevelleSS 4 ай бұрын

Nice work absolutely perfect

@tismeagen684 Ай бұрын

These guys don't throw much away, they're experts at making incredible repairs.

@sheriffroylambifs894 4 ай бұрын

PERFECT ~ INGENIOUS !!!

@icegaleas 4 ай бұрын

Meus parabéns você é um grande profissional.

@felixhernandez211 5 ай бұрын

La verdad me gusta mucho la tornaría ,saludos desde oaxaca México gracias por compartir,

@bobbynash282 5 ай бұрын

Thats the CLEANEST damn machine show lve ever seen. Must have great pride in his work.

@albertolopezaguilar3799 15 күн бұрын

El vídeo de un buen trabajo, mis respetos maestro tornero, saludos y bendiciones.

@Manufacturingsite1 5 ай бұрын

Amazing ❤

@ivanhorban340 2 ай бұрын

Beautifully creative solution to fixing an transmission input shaft.

@user-ib4dd4yj4x 4 ай бұрын

На посадочном месте подшипника сварки насрал, ещё и палец гнёт, владелец коробки тебе его и вставит скоро, перед ремонтом всей коробки

@cameraamnhac 5 ай бұрын

Your video is Amazing😊😊😊😊😊

@alshaa1699 22 күн бұрын

Nice Job 👏👏👏👏 Excellent. God Bless You All Moslem Brothers

@MechanicAvenue Ай бұрын

Nice Job 👍 Your startup always Different 😂❤

@bobbynash282 5 ай бұрын

Ive seen a time or two could've used this type work done. The edges of the gears sure can wear after much use. Great work, saved the day once again.

@MrEyesof9 4 ай бұрын

It’s nice watching folks do so much, with what we have been taught is, “so little”

@toykrathongnoi8756 5 ай бұрын

นี้คือว่ามีพรสวรรค์ คือมีมันสมองในการพลิกแพลงในงานว่าจะทำอย่างไรให้คงทนเหมือนเดิม 👍👍👍 🤍🤍🤍🤍🤍🤍🤍🤍🤍🤍🤍🤍🤍🤍 ( เยี่ยม )

@user-gy7xn3tz7w 4 ай бұрын

One heavy gear change and the weld shears of unscrews the gear and eats the gearbox!

@reinaldosilva5936 3 ай бұрын

Muy buen trabajo,lo felicito,solo digo que el tipo de soldadura no es la adecuada para el tipo de material,uso 6013 es soldadura para herreria, hubiera usado acero inoxidable o 7018.no crítico es ina observación.

@philliplopez8745 3 ай бұрын

BRAVO !!!

@cristovaorondeiro8801 Ай бұрын

Muito bom !

@thongnguyen2447 3 ай бұрын

Một người thợ tiện giỏi, đa năng

@maswid4987 3 ай бұрын

Wooow perfect

@Monoasmar 4 ай бұрын

عمل جيد ومتقن واللجوء لهذه الطريقة عندما لا تتوفر قطع بديلة وبالتأكيد هي متينة . ما نوع أسياخ اللحام المستخدمة؟

@KhanAli-vm7xj 4 ай бұрын

Amazing process

@mustansarabbas2571 5 ай бұрын

Nice 👍❤❤

@fayyazsiddiqui1668 17 күн бұрын

Very nice

@MrFadicuz 3 ай бұрын

nice job

@MarcosGomessantosGomes-vw6so 18 күн бұрын

😮. Novo mandril

@user-bb5hy7vz1s 4 ай бұрын

عمل ممتاز جدا جدا وعاشت اليدي

@cameraamnhac 5 ай бұрын

1st🎉🎉🎉🎉🎉

@kenhoward3100 13 күн бұрын

great work

@user-yw1qs7yw5e 15 күн бұрын

Молодцы, индусы!

@2010bigfathen 4 ай бұрын

That should last until the water gets hot….

@Diglo1 4 ай бұрын

I wouldn't have welded it because it can ruin hardening. Instead use two or three pins to lock the threads and just hammer press them so the ends won't let them get out. Hardening is saved and otherwise the work would be the same. Though I must say, they didn't directly weld the teeth so maybe it isn't that much of a concern, but still...

@user-rq8zw2tv2u 3 ай бұрын

What is the machine that u use .?? Spining machine name,,, pulling or gradering machine,,,, name of machine which company????

@craigjones2015 4 ай бұрын

Put some oil on it cutting it dry

@mustansarabbas2571 5 ай бұрын

Nice 👍

@rls684 19 күн бұрын

Never mind how long this might last, why would you ever weld next to gear teeth and a bearing surface without protecting them from welding splatter.

@ernestcotton9324 16 күн бұрын

True, but some people only use what they know

@mughalumair7932 15 күн бұрын

استاد محترم کون سی ٹپ استعمال کرتے ہیں گراری پر ٹول لگانے کے لیے

@iliaivanov5055 2 ай бұрын

импортоИзвращение

@michaelfragrances 5 ай бұрын

You can also weld in water to avoid overheating.

@Look_What_You_Did 4 ай бұрын

Right... and intentionally introduce hydrogen embattlement. Got a real winner here.

@cameraamnhac 5 ай бұрын

Hello you🎉🎉🎉🎉

@GAGANDEEPSingh-hx2un 3 ай бұрын

❤❤❤❤❤

@pavlegazibaric6493 4 ай бұрын

👍💪❤️👋

@HayNillesen-no3ig 3 ай бұрын

Threading is not a tight fit,all force goes via welds who will break

@shahnawaznizami1084 4 ай бұрын

Bhai aap k workshop ke location or contact kia hai..??

@treadmillrepair754 4 ай бұрын

Excellent

@OldSkoolF 4 ай бұрын

Dude... Ever hear of cutting oil? The screeching is rough...

@Look_What_You_Did 4 ай бұрын

Loser... ever hear of cutting hardened material? Of course not... your an ameritard that has never stepped foot into a machine shop.

@zadkmb 5 ай бұрын

引っ張り方向に力は掛からないんだから、ネジ切っても何の意味もない…何の周り止めにもなってない。むしろ普通に圧入した方が良い。あの程度の溶接じゃ、すぐクラック入って空回りするだろうし、空回りしたら、ネジでギアが横ズレして、他のギアにまで破壊が及ぶだろう。

@jonirido1239 5 ай бұрын

mantap cara sambungnya

@luizFernando-dw9vq 5 ай бұрын

Se quebrar essa solda vai acontecer oque? Destruir a transmissão inteira?

@luciofarias5336 4 ай бұрын

Otimista vc hein?

@user-mc9qs6xr3c 4 ай бұрын

Плохая мастерская, мастер без тапочек

@user-bl1mi4tr7o 4 ай бұрын

И снова нам показали как ремонтируют, но не показали как работает эта деталь. И главное, сколько проработает до поломки. Отсутствие СОЖ перегревает металл, что уже меняет физико-математические свойства, термообработка не проводилась. "Грустишка от Данон" одним словом.

@sergeyguryn3876 4 ай бұрын

в ихних условиях порой это единственный способ заставить передвигаться грузовик, да первичный вал не сможет проработать также как заводской вал но если особо не рвать и не перегружать грузовик то пару тройку лет возможно и выдержит...

@sergeyguryn3876 4 ай бұрын

единственное что я бы на ихнем месте попробовал бы сделать так это посадку с натягом а не на резьбе как делают они, разогретую шестерню напресовал бы на вал так на некоторых кпп делают...

@Igor-dg4nz 4 ай бұрын

@@sergeyguryn3876 без перегруза? Серьезно? Вы их рессоры вдели?

@user-jp8yx9ue8w 4 ай бұрын

Смотрел и думал, когда будут остужать деталь, но так и не дождался. Печально.

@user-jp8yx9ue8w 4 ай бұрын

@@sergeyguryn3876 Обычно так и делают. Но для спокойствия с каждой стороны по 3-5 точек сваркой и все ходит не хуже заводской детали.

@johnbrando8248 Ай бұрын

wearing long sleeves is very dangerous I saw many accident already

@olegribak8325 12 күн бұрын

лучше б просто запресовал

@gabrielcatani9317 4 ай бұрын

No entiendo el por qué de la rosca.

@trilethanh8637 5 ай бұрын

HINO JAPAN

@stanisawkolibski3332 4 ай бұрын

😅

@balwantyadav7901 4 ай бұрын

Itne me to ham Naya hi le lete hai india me

@VladimirPereslavtsev 4 ай бұрын

За все время ни капли СОЖ

@user-ir4yf8ci8e 5 ай бұрын

Токарь - ураган👍!

@user-uk7wl8hp7e 5 ай бұрын

Не, шайтан !😀

@transformer889 4 ай бұрын

chipmunks are back

@oldschool1993 4 ай бұрын

Maybe he's a one man shop, but leaving the key in the chuck and walking away will get you fired in a shop. Threads are not accurate enough to maintain concentricity, he should have machined a mating shoulder to join the parts. The shoulder should be on the shaft side, as this is the 1st motion gear and the force would tend to unthread the gear toward the shaft side.

@nereo4442 4 ай бұрын

😂😂😂😂 🤫👉🎥🎬🫵🧐

@scheusselmensch5713 4 ай бұрын

Yeah, I would have just made it a pressed up assembly, with locking pins

@andresouza2314 4 ай бұрын

I would just get a new one. But since this thing has been welded, it should be fine. Good enough.

@RutherfordRyan1 4 ай бұрын

Eye protection and coolant….!

@Look_What_You_Did 4 ай бұрын

Says the unemployed loser that has never stepped foot in a machine shop.

@teknik53 18 күн бұрын

bunu yaptırmak için TR de tornacıya vereceğin parayla aynısını alırsın zaten :)

@user-gy7xn3tz7w 4 ай бұрын

You gotta be shitting me! Note to self, never holiday in India 😮

@outstanding1448 4 ай бұрын

This is Pakistan, just see the up-loader's nickname.

@Look_What_You_Did 4 ай бұрын

@@outstanding1448 The ameritards never leave their borders...

@outstanding1448 4 ай бұрын

@@Look_What_You_Did 😁

@AndyL940 4 ай бұрын

That will last about 10 minutes unless it’s in some old tractor idling around a paddock at 1000 rpm . If that’s a truck input shaft it will vibrate to bits

@sergeyguryn3876 4 ай бұрын

небудет вибрировать, он центрируется резьбой....

@creativehands1094 9 күн бұрын

Clearly u never seen these guys work