The Oddly Broken Axle Was Well Repaired by The Mechanic and Perform Amazing Skill

The oddly broken axle was well repaired by the mechanic and perform amazing skill
#oddlybrokenAxlerepaired
#Mechanicrepairperform
#pkdiscoveringtechnology

[@buckburton7318]

I suspect that axle now has physical properties roughly comparable to a broom handle.

[@robastore9192]

😄😄😄😄😄😄

[@koguiadati224]

​@@robastore91927

[@juanjq71]

yea, dude clearly broke again

[@giovannifinievoli8825]

yes

[@istvanfazekas151]

Don't underestimate the qualities of a good broomstick, though!😀

[@user-lv9mt1ev7q]

Можно было просто хамутами стянуть сварка явно здесь лишняя😅

[@patalogoanatom]

Странно что не покрашено ещё, так-то слой эмали тоже придаёт упругость

[@user-zt5gz5hw2y]

Либо синий изолента вместе хомута 😅

[@patalogoanatom]

Тогда в два прохода с перекрытием 80%

[@Anton-cr3gt]

На термоклей посадить знатный лафак

[@user-xu7dh3bv5v]

я ваще не понял из чего сделан этот вал- из дерева чтоли?))) судя по излому. метал так не ломается)))) если это дерево и саморезов хватило бы а если серьезно, то как сварщик я скажу что данный вал это нагруженный элемент и сваркой тут не помочь, надо восстанавливать геометрию и тд. Лучше купить новый

[@craigescapeddetroit5198]

Axles break when you pretend your 8 ton truck can carry 30 tons every day.

[@mshort7087]

A perfectly executed repair. This axle shaft will last a lifetime as a mailbox post👍

[@mkelaras8428]

It is not a perfect repair, rather it seems like a temporary patch because it always ends up cracking and splitting in the same places that it broke before, and that is because it is a cold weld with different metallic materials joined together or similar, so sooner or later it will break. It starts again in the same place due to pressure and overload, which is why a complete joint depending on the metal is not the same as a hot or cold weld.

[@bastiarhamzah6465]

Untuk d pajang tidak untuk pengoprasian

[@soupvis2616]

It is a joke @@mkelaras8428

[@BigcountryReactions]

It works perfectly fine quit being a hater

[@seregatihones]

Это не работает, доедет до базара в лучшем случае. Только будет нагрузка и лопнет в тех же местах.

[@sayjindefender]

Now I understand how those vehicle tragedies where trucks and buses tumble down the sides of mountains happen. The crankshafts and axels in these videos are cast from random scrap metals at road-side forges/machine shops. These repairs belong on farm only vehicles with not more than 200 horsepower. I spend hours watching these videos as they are quite entertaining. If the sun EMPies the earth and civilization declines, I hope these ingenious guys are my good neighbors.

[@JonDingle]

That drive shaft isn't cast iron. It is a type of cast steel because cast iron woldn't make it out of the factory yard. If you look at the swarf when its drilled, you can clearly tell its cast steel and as such, it is weldable.Only the quality of the weld will determine how long it lasts subject to the load applied when the vehicle is being driven and in what conditions. Not that I am saying I would repair it, but needs must if the part is not readily available.

[@mountainman5025]

A shop is available at the bottom of every mountain.

[@alex-green]

Подарите им изолетну а то че они мучаются с этой сваркой, только электричество жгут😂

[@user-zt5gz5hw2y]

Синий изолента 👍🤣

[@wilhelmgert9388]

Pokrasit,smasat,wibrosit.

[@user-qe9eh6dn5h]

Они просто работают на ютуб! Знатоки как мы пол дня тратят на это 😂😂

[@user-uc7yr7ql3e]

Надо было на суперклей приклеить - надежней было бы 👍

[@user-uj5cu8wg5c]

На проволоку .а домой приедет - как следует на изоленту примотать

[@Lowboard_Fun_Research]

13:40 Столько мучений с заклёпками, а там в основании этой щепки уже трещина)) Лучшеб сверху трубу надели и сварили

[@manson5738]

я думал я один это увидел...

[@Romankv]

@@manson5738 показалось

[@stevegerhart929]

They repair (attempt) to repair everything because the cost of the replacement part. New part availability is surely a big factor. As for the strength of this shaft. Probably good If your hauling styrofoam. Labor to repair this is probably 5 dollars

[@user-jx4bn2iv7v]

Это все порвется при первом сбрасывании сцепления. Единственный вариант ремонта обточить концы, посредине втулку, концы обварить и на электрозаклепки для усиления. Я видел так привода удлиняют и ходит главное

[@sergey3485]

@@user-jx4bn2iv7v вы хоть знаете зачем обтачивают под втулку? - чтобы центровка не ушла в процессе сварки. Если вы обеспечите ее другим путем или это некритично (например отбалансировать можно, низкая частота вращения..), то делайте как сможете. Хоть трубой обхватите.. Хоть кузнечным методом за неимением более технологичного варианта. При первом сбрасывании не порвет, эти трудяги на диване языком не молят-делают и работают-скоро китай догонят.

[@user-gk3ru6nu5h]

При союзе у нас почти на каждом газоне или зиле была прикручена на раме запасная полуось, еще её удобно использовать как кувалду при бортиравке колес, вот это отремонтированая как раз вместо кувалды и годится, по моему

[@asadlev]

Откуда боядь вам всем знать вы свой АвтоВАЗ говно видели? Или тупите хором под дурачка? Да вы боядь имея заводы инженеров говно в буквальном смысле делайте и вот вы еще осуждайте людей у которых нет денег на новую деталь как могут так и живут. Вы представители автоговна не имейте морального права кого то осуждать у вас руки из жопу и и мозги там же

[@user-mh2ht1cd4o]

Это железный стержень автора этого ремонта😂

[@rjparry1]

Always wear safety sandals when you’re nailing a driveshaft back together

[@machwind3266]

Notice that no one wore safety glasses while turning the shaft. They have used their "safety squints".

[@maidenlord6663]

The bad part is they actually think they fixed it

[@vrrajasimhasimha4536]

Very short life...

[@user-zd4jx4tg9d]

I usually love these Pakistani/Indian automotive repair channels for the skill, and craftsmanship with limited tools. But this is not one of those videos. This is pure horrifying hackery.

[@ferrumignis]

They either perform amazingly good repairs given the tools and materials they have, or the entire thing is a complete waste of time and maybe even a disaster waiting to happen. Unfortunately this video falls into the latter category.

[@honkie247]

It seems that the later group of videos is just created as clickbait. With the price of a AK up, you have to raise more money.

[@MEDMYSIK]

Да можно было одними хамутами ограничиться! )))

[@davidmotoman4956]

How long did it last for after the repair. The Original metal had a fatigue fracture. Iam sure on the first overloaded Hill Climb it would have twisted right off again. Lot of patients and a good final job. BUT would not a new or even second hand axle been a better alternative.

[@nonsequitur807]

It prolly won't last long if you're doing sweet smoky burnouts

[@PedroGomesdaSilvapgs]

Fez 3 furos enfraquecendo ainda mais a peça.

[@Anton-cr3gt]

Если плавно будет трогается с места,возможно выдержит

[@darrininverarity4297]

Probably trying to sell the truck this axle belongs to with the 222 warranty.

[@jepper80]

They probably painted it and sold it as new.

[@user-qr8ns2tr2o]

Работа ради работы. "Прекрасно". 👏😆

[@user-zw4jd4wm8m]

Отчаянные мастера.молодцы

[@Rismanbejoselawase]

Kelihatan pulih tetapi kekuatan nya tidak akan pulih... Waktu dan usaha... Biaya ahirnya justru lebih besar.... Tapi cara mereka memanfaatkan sumber daya yang terbatas sungguh luar biasa

[@mhoellvheyanx]

In indonesia we choose buy a new one, because that cost is more cheaper than repaired.. But this video is excellent to watch, thank you for uploading a good video.. 🎉🎉🎉❤❤❤

[@user-ep3dt6rl8y]

Каждый раз что то новое. А ведь у них машины с такими перегрузами,- которые мне на заводских запчастях и не снились.

[@thinkformyself69]

A pointless effort.duck tape maybe?

[@benk7081]

I would suggest elastic instead of tape.

[@user-ku4xz1wv5u]

Обязательно синяя

[@andreas7136]

super glue perhaps?

[@Dema-777]

А черенком от лопаты не пробывали заменить? По прочности примерно одинаково будет!

[@user-mh2ht1cd4o]

Даже после расточки видно что структура металла разная😂

[@joaobatistapereira57]

Perfeito parabéns, vocês merecem, nota mil, pois são profissionais mesmo

[@heightsgolan8742]

machining it down weakened it. It is not 100 % welded either. They had enough room to slide a pipe over it and weld both ends for strength. But even then, where the welds are, it compromises the temper.

[@Autumnacresbooks]

i agree it will not last but they had to machine it down to get the bearings on

[@gassag1534]

250 Полуляхов😂

[@adaorobertofreitas6338]

Será que aguentará a pressão ? Na minha opinião foi tempo perdido

[@igorbrenkov7086]

Кривой электрод100% успеха😎

[@markgorky3952]

🤣 смысл этих заклёпок если уже вторая половина лопнула от клепания !)))

[@josiascarvalho9571]

uma verdadeira obra de arte parabéns

[@josefajardo8376]

Excelente trabajo

[@benk7081]

This is not called amazing skills. This piece cannot be repaired. And even if it was repairable, they did not follow welding best practices. There is no pre-heating, there is no cleaning the pieces that need to be welded. So basically they repaired something that is beyond repairable and they are putting many lives at risk. It will break very soon. It will not last. P.S. the pins are absolutely useless. They will not add any strength to the piece.

[@fernandorodriguezmaya3997]

BUENÍSIMO GRACIAS

[@osvaldorivero4242]

BRAVO !!!!

[@aquarium58]

Покрасят и продают этот хрень в соседней деревне😂

[@user-jh9cw6on2j]

😮я бы пластилином залепил

[@user-cc9hi3kt4u]

ВЫ В РАШКЕ ТАК И ДЕЛАЕТЕ

[@persaukko4928]

Its better than nothing, if this would be emergency repair in middle on desert its ok. but if they think this is ok to do this way its very dangerous thing😂

[@fatmiabdou7628]

Well done 👍

[@user-xi9xy9bj6x]

Теперь с этой полуоси можно сделать лом, землю рыть😂

[@llorencemagtoto9138]

Mad max style repair, nice

[@brunorault1199]

Très bon travail

[@ml.2770]

Wheelie great work. That axle lives on to shaft another.

[@franciscoventura3727]

Excelente

[@victormontecinos3755]

No hay garantia de que soporte un mismo golpe o uno menor el eje central no es el optimo quizas habia otra forma de darle consistensia a la reparacion dado que la soldadura es debil y los remaches soldados son facil de romperse.

[@user-cd9ud4xu1q]

Есть подозрение что у пакистанцев много свободного времени раз они вот этим занимаются .

[@user-xf8le1im2k]

Да но мало денЕк

[@ronnielacar313]

If they put that axle in a bus. I will not in that bus. The axle is a widow maker...

[@nunes1907]

05:56 at the right side, you can clearly see another crack asking to be break... 13:10 again right side, basically broke... that's crazy!

[@mick1gallagher]

Should have just put elastic from the wife's knickers on it and not bother with the welding

[@MultiRovich]

Пойду выпрыгну с балкона,может полегчает....

[@user-de7wv7dl9k]

😂

[@aarifihorticulture4237]

کلا کا کاری تُجھے سلام

[@Happy357mag]

Thank you so much, I needed a good laugh!🤣🤣🤣

[@sps1415]

Слишком сложно, можно было синей изолентой заматать. Надёжность та же! 😂😂😂

[@tombarlow6176]

Nice work but it won't last a day 😊😊

[@peterpumkineater6872]

Should use panel bond that car manufacturers use to glue panels together. 100% guarantee

[@patverum9051]

Just the circlips alone would have the same strenght..plenty if the engine is about 3 hp max.

[@pedrosmits]

19:52 don’t drop it too hard, it could break 🤣

[@mountainman5025]

You mean break?

[@pedrosmits]

@@mountainman5025 yes 😇

[@Afzaalkhan815]

Good job

[@Tatal.b]

Ótimo 👍👍

[@edwardparker760]

I think it is fair to have serious doubts about how long this would last, full marks for trying though.

[@andrzejporeda7281]

Bardzo super jest to zrobione i odrestaurowane pozdrawiam serdecznie 👍👍👍👍👍

[@krzysztofkudyba6923]

To jest gówno. Skoro urwała się półoś z rodzimego oryginalnego materiału to spawana nie wytrzyma nawet 70% obciążenia. Pozdrawiam. I nie pisz więcej głupot bo się ośmieszasz. I jeszcze dziad spawa na tokarce, nawet łoża z prowadnicami nie zasłonił. Porażka.

[@pb.manoelvicentesilva996]

Uma fratura complicada viu! Será que suportará a operação? Parabéns pelo trabalho perfeito.

[@otoriosaraujo1001]

Hard Work Man !! Congratulation for your job 👍🏽

[@piratplay8764]

Могли бы оставить и на хомутах

[@amiraldomiranda5437]

Amazing

[@user-rf3jr6lq3r]

Да и хомуты это тоже перебор, синей изолентой замотать и збс

[@larrygriffin7024]

I don’t see why this wouldn’t work I’m sure this is not something they haven’t tried before. You have to realize one thing in a western culture they throw away everything if it breaks, nobody tries to figure out if it could be repaired you have to give these people the credit they deserve for being a great innovator of technology so stop hating

[@benk7081]

This piece cannot be repaired. It has to be REPLACED. With this unbelievable repair, they are putting many lives at risk. This will not last long and when it breaks, it will be disastrous.

[@coopdeville377]

@larrygriffin7024 Please take a class on the tensile, torsion, and shear strength of metals and how heat treating the metal hardens it. Once you heat it back up with a weld, those properties are gone. Yes, the work "looks" nice but, it will get you down the road just so far. The metal was flawed to begin with. My father worked heat-treat for 41 years and taught me about metals for my airplane builds.

[@bustedford]

The axle was whole before and it broke now its got 3 holes in it and a 1/4 of weld around the break and thats it i dont think its gonna last past the first time the guy lets the clutch out with a load on it or the first corner when the spider gears put stress on it

[@larrygriffin7024]

@@coopdeville377 you are right with everything you said it’s facts but I was just looking at the fact that they had no choice but to fix it because ware they live and parts are very hard to come by

[@coopdeville377]

@@larrygriffin7024 I agree with you 100%. You gotta do what you gotta do to get by. The title of the recording is misleading. It's not an extraordinary fix...just a bandaid to get by. I'm sure the "junkyard" has zero parts of this nature.

[@juancarlosricarti7215]

Si la pieza original no soportó el esfuerzo al que fue sometida... qué queda para una reparada así... Estos trabajadores son muy hábiles pero aún con su destacada destreza no creo que igualen a la pieza original. Seguramente el dueño de la máquina en la que trabaja esta pieza hará uso de ella con mucho cariño hasta poder venderla... Un saludo grande para "templado" y "revenido" que no fueron invitados a esta fiesta...🙏🖐️

[@user-mz4ig2tz6x]

If different chains offer repairs that are always the same, it waste their time doing it or pay for it.

[@JonDingle]

All things considered, that isn't a bad repair. Preheat before welding, weld the rivets first then the crack, peen the welds as you go to stress relieve the the repaired area and then allow to cool slowly in sand. The machine the shaft to a finish. It would get someone back on the road but for how long? No idea!

[@guypatts494]

Will work just fine

[@roballan4944]

Some things shouldn't be fixed. This is neither safe, nor likely to last.

[@timgannon2993]

My screen has a crack so i am not able to see the image clearly but from the comments, i can assure you that the wedding was fantastic. The only thing we are wishing the couple is a fabulous honeymoon and a happy marriage life.

[@bryanduncan1640]

If a solid steel shaft cannot take the stress without fracturing, what chance do you think that two halves welded and riveted together have? More chance being struck by lightning!

[@user-ej2wo9im7n]

Интересно по какому они тех процессу это делают. Скорее всего там же и сломается. По мне лучше бы забужировали.

[@ttinnovations3310]

that axle has a hidden story, it was broken before in that same area, and broke again, that is one way to keep a shop in business, see you again in 5,000 miles?

[@pianotrainee9314]

Ребята победители по жизни - сначала с клиента взяли за чудо-ремонт, а потом еще с партнерки ютуба деньги получили, пока мы тут в комментах умничаем 😂

[@johndonahue1935]

Voids, slag inclusions, and hard spots make the repair perfect for static display.

[@freddyhernandez5741]

Genial 👌

[@fionaedwardes8801]

My dad welded our Cessna crankshaft back together when it broke in two. He could not afford a new one. The engine runs just fine!

[@CarlosDiaz-xb8jd]

On an airplane, stop lying

[@fionaedwardes8801]

It is true. I watched him!

[@JonDingle]

@@fionaedwardes8801 Video it next time.

[@fionaedwardes8801]

Ok, I will do that! @@JonDingle

[@user-kk4ng1ud5n]

гениально

[@joelklevnas3234]

As good as new!

[@nubery100]

DAT MY BOY RAJ, SKILLZZZZZZZ

[@buddyboy1953]

Perhaps it was good enough to get the truck to where it had to be.

[@acalifornian6588]

I have my doubts about the integrity of the axle. I don’t think it will last

[@cesarsuarez5179]

Mucho torque en esa zona,,apenas durará unos días,,

[@Kanaldopinto]

Uma obra de arte

[@doughouston4741]

Ripley wouldn't believe it if they didn't see it

[@markpatrick7884]

Now it will snap next to the repair 😂

[@antoliv2668]

A reparação com cola quente seria muito mais rápida para um resultado semelhante.

[@navasardoganesyan7521]

Сделано норм только работать она не будет потому что надо было разрезать до середины и нормально варить с одной и потом тоже самое с другой стороны

[@cowboy399]

I guess they haven’t heard of duct tape and JB Weld?

[@user-jj1yv2lc1k]

From all video repair that I watched and I think most of that are reasonable if we look at the price for the new one. But this is unreasonable

[@mariosamson2055]

Good

[@BitterTruth123]

After installation the propeller shaft worked for entire 36 seconds.

[@danielreyes-dj4nq]

If im not mistaken this repair is called the " spike and twist " when you go to the shop ask for a spike and twist

[@timhull8664]

Aha, ! The old diesel injector needle centre punch trick!

[@richardmiller5238]

💯💯👌👍🏻

[@SangBintangJakarta]

Kalo di Indonesia As yang crack di buang Tapi mekanik PK telah mampu membuat sesuatu yang melebihi dari yang kebanyakan orang

[@user-xe1pw1xq4n]

من ایرانم.پلوس را تعمیر نمیکنیم فقط تعویض میکنیم.ولی خوشم اومد .ماشالاه به این دست وپنجه.خدا کنه دوام بیاره ماسالا❤

[@sergey3485]

молодцы, работают а не советы дают.

[@echutien-go1ib]

Sửa xong để bán xe, tội nghiệp cho người mua sau

[@veniceandberlinsadventure5912]

As a welder myself there's not one from this repair is acceptable to our standard at least but it's their life it's their rules who am i to say that they shouldn't do that i guess thats their way of life over there.From the look of it this stuff is an everyday thing to them,but very unsafe practice though.