Playing new controllers on the 𝗢𝗥𝗜𝗚𝗜𝗡𝗔𝗟 Xbox! 🎮 𝐎𝐆𝐗𝟑𝟔𝟎 𝐑𝐞𝐯𝐢𝐞𝐰

The OGX360 is an amazing custom device that allows support for current generation controllers! If you were wondering how to play Xbox One S/X, Xbox 360, Bluetooth controller, PS4, PS3, Wii Mote, Wii U Pro wirelessly on the original Xbox? This video is for you!
𝐎𝐆𝐗𝟑𝟔𝟎 𝐎𝐯𝐞𝐫𝐯𝐢𝐞𝐰 & 𝐒𝐩𝐞𝐜𝐬!
github.com/Ryz...
𝟖𝐛𝐢𝐭𝐝𝐨 𝐀𝐝𝐚𝐩𝐭𝐞𝐫
www.amazon.com...
www.8bitdo.com/
how to use xbox one controller / how to use playstation 4 controller / on original xbox / connect new generation controllers / on the original xbox / xbox 360 / controller / controllers / how to connect / how to setup / custom usb / modded xbox / modding / how to / mod / original xbox / ryzee119 / backwards compatible / how to play / new gen / hack / modchip / plug & play / review / showcase / wireless support / Xbox one controller on original Xbox / ps4 controller on original xbox

[@transtremm]

This device and the 8Bitdo USB bluetooth receiver are a perfect match.

[@vkhelldog]

The only reason it didn't work with 1 plugged in is you plugged into the 4th one instead of the first one, but to support 4 you need all 4 plugged in.

[@tomfoolery2964]

They also make internal versions of this so you dont have to have all those wires sticking out.

[@Zencast5]

what are they called?

[@jakeplayzyt5220]

Guide?

[@tomfoolery2964]

@jakeplayzyt5220 this is outdated stuff, you can now just buy a brooks wingman xb2 and play wireless

[@tompaquette7138]

Should just need the first arduino closest to the usb a plugged in for the entire ogx360 to be powered.

[@BladeBlur]

4:38 seriously you need to do a room tour because your room looks fucking amazing

[@desimedia6521]

It is an open project if you have a litle bit experience of soldering and aruino you can make it by your self. No biggie

[@zombiemachinery4868]

Yeah, but the Wingman XB...

[@quann06]

I want one!!

[@_The_Worst_]

I so need one of these...👌🏼💯✔

[@magnus00125]

those wires are everywhere

[@VSDeluxe]

You can buy a Xbox to USB female adapter cable and this USB and it will work too I think.

[@thelegendcollector8538]

How can I get one ?

[@Jdjsksjdhdj]

i want to slim my og xbox put a laptop mobo and an Nvidia shield in the xbox. use the shield as my front end dashboard and the pc does the heavy lifting and you get a more modern modded original xbox experience. my uncle stole my halo original xbox and traded it for an rda for a vape. good thing i have 4 black one in my closet

[@donnalawrence4510]

It would have been nice if the OGX360 adapters were available to purchase when you did your review? They are not available for purchase at all!!!!!

[@MrVile]

you have to keep an eye out online and save ogx360 to your notifications on Ebay. There was actually was a few listed when I did this review and people continue to make them. I just looked on ebay and there is one available.

[@TEK_Nemesis]

I always have lots of ogx360s in stock and I ship worldwide. facebook.com/TheMODShopByTEK/

[@bradhogan2461]

Is there any way of someone making this run for the 360 console? I really want to use my 8bitdo SN30 on my 360, but I can't find 1 way of doing it. If this could work of anything else like it please let me know!

[@Richbroth]

What about a usb arcade stick?

[@MrVile]

8bitdo has a cool arcade stick that would be compatible. www.8bitdo.com/arcade-stick/ or you could use any compatible with the xbox 360 / xbox one / ps4 since the 8bitdo connector also supports them. Hope this helps :)

[@SKY11211213]

the sad thing with the 8bitdo is that the rumble at least for PS4 controllers is horrible. The translation is wrong which makes me not like that dongle. It is good of course but that is the weak point for people who want proper rumble comparisons between PS1-4, Xbox, 360 and more. PS talking about PC use

[@JP-dn2eb]

Brook XB

[@retro__glitch1572]

gee, its almost a year since you and mr skulls collaboration on halloween

[@MrVile]

ah yes i know... crazy. Mr skull does have a Halloween style review he is trying to put out

[@rar8532]

Where can I buy it? I'm currently looking and having no luck.

[@MrVile]

see one on ebay right now just look up ogx360 and if you don't see any you can set ebay to notify you when they become available by hitting save this search.

[@mikeandroid3512]

What if I want to use a Sega genesis six button controller or something similar on my original Xbox? How do I do this in the easiest way possible? I know that the original Xbox had some streetfighter 15th anniversary special edition game pads but I really didn’t like them.

[@OfficialGaminGuys]

I have just got the OGX360 and 8BitDo, I can also sync the 8BitDo to several controllers, however, where it says to press start to begin a game, I'm getting no buttons working to actually start the game. Any advice on why this might be?

[@djm9937]

Same here, it connects, but doesn't work. Same with the Kaico one and the Cronusmax

[@gamey1346]

Where did you buy your OGX adapter?

[@OfficialGaminGuys]

@@gamey1346 I got mine sorted

[@FroztiProductions]

Can I print it myself? Also the creator of the board only had one controller port used and it worked fine...

[@MrVile]

not sure about the printing.. but that is interesting.. ill have to double check mine again and see what's going on

[@tompaquette7138]

What controller adapter would you say is your recommendation for me? I have ps2, ps3, Wii and switch that I'd like to all use a 360 controller with, if possible. I have a couple of Brook adapters, first for the ps3/4 to ps2, second a xbox360/1 to ps3/4, and a cronus zen.

[@patrickbozym5508]

How were you able to get more than one 8bitdo linked controller working? I bought the same powered USB in ans 8bitdo recivers, but could only get one Xbox one controller working at a time.

[@MrVile]

that was the information I found on the OGX360 when i purchased it. I've yet to try it myself since I went with the 360 controller method for 2 players. It has to be possible.. but it never gave information on how to set it up unfortunately. I'll message the guy I purchased it from and see if he can give me more details on how it works. If you figure it out let me know

[@Keithjordan101]

Anyone try the Brook Wingman XB?

[@GarthBrookshire]

How do you connect the 360 wireless controllers? I assume you have to connect it through USB first? I have the wireless receiver but it doesn't pair.

[@MrVile]

do you have the ogx360? if all 4 mini usb ports are plugged in and connected to controller ports on the xbox and the wireless 360 receiver for PC by microsoft is connected to the front usb it should work.

[@GarthBrookshire]

Thinking it’s because I don’t have a genuine Bluetooth adapter. I’m going to try 8bitdo with it since I figure I can get two wireless 360 controllers with that.

[@keithjordan8728]

Anyone know of where I can get one of these? Or where I can get one installed internally to a modded Xbox?

[@10gaugesbelow]

I tryed my OGX360 on my Pcsx-reloaded PS1 emulator on the xbox and I did NOT work. But it worked fine on the xbox games. Does anyone know why?

[@fewerspeaser2004]

Could I...logically get a gamecube controller to work with this?

[@BigDom1002]

while I don't currently own an OGX360 it should definitely be possible, if you are lucky you can just use a GameCube USB adapter that uses Xinput on PC, but it should definitely work using the 8Bitdo wireless adapter and then connect that to the 8Bitdo Wireless GameCube to Switch adapter. Alternatively, it should theoretically be possible to use a PowerA GameCube Style Switch Pro controller connected to the 8Bitdo Wireless adapter!

[@480i2]

Is possible to remap the black and white buttons? Does the added shoulder buttons of other controllers work?

[@vkhelldog]

Black and white are automatically the shoulder buttons.

[@keard558]

What's the latency vs the old logitech provision wireless

[@TroJanVirusMusic]

Hard to believe but the ogx360 seems faster

[@keard558]

@@TroJanVirusMusic ?!? Thanks for telling me

[@TroJanVirusMusic]

@@keard558 something about same USB port being used but the newer tech having faster transfer speeds via Bluetooth than actual direct USB connection Same reason the Dual Shock 4 has less latency using Bluetooth instead of direct USB.

[@wiiu7640]

But can it steering wheel or flightstick?

[@wiiu7640]

Can I use my ps2 guitar hero guitar on my OG Xbox and gain the favor of all my friends from 20 years ago

[@shadowdancer5330]

Would my Tekken 6 arcade stick work for original Xbox?

[@MrVile]

I don’t think so but it would be worth trying..

[@AvoidingHumanSociety]

Do you get audio through the controller?

[@MrVile]

I don't think you do but just for the hell of it ill test it out and if it has audio ill let you know

[@askariboy4857]

Does he sell them already assembled?

[@MrVile]

at the time i got mine on ebay yes, if you have trouble locating one let me know i might be able to get in contact with him again

[@askariboy4857]

@@MrVile could you ask him if he still sells them on eBay? I don’t have a Facebook but if he only sells them on there then I might just have to make one. Thanks 🙏

[@tay2157]

@@tkscustomsupermodz Hi, I would like one! How much do you sell these for?

[@tay2157]

@@tkscustomsupermodz oh ok thanks, i think i already have you as a saved seller lol

[@tay2157]

@UCboJaGmTB0kKnpyYOwgeH-A Awesome thanks! I will check you out on Facebook!

[@Ernisx619]

Can we use ps3 controller ?

[@MrVile]

with the 8bitdo wireless adapter - yes you can

[@djm9937]

@@MrVile Not on mine

[@sammy61187]

Cool idea ruined by the need of four ports that's just extra unneeded cost

[@MrVile]

I may have been wrong, someone else commented only the last port is needed to power it so I need to verify that works. If that's the case it should only take up 1 port. I'm gonna test it out.

[@sammy61187]

@@MrVile Keep us posted

[@MrVile]

@@sammy61187 will do

[@Wally17.]

You don’t need to use four ports. Only the first one is needed to be plugged in. The first port closest to the 8bitdo is what provides power to the board.

[@MrVile]

@@Wally17. yeah now it all makes sense thanks for the info :)