PLUMBING FIRST!!....Never seen this KITCHEN TAP set up before..

[@MJTiffPlumbing]

Not seen a boiling tap set up like this before, everyday is a school day though....No one knows everything Dont forget to hit that Subscribe button to not miss out on any videos that i put out

[@grantfearon7089]

Mark you can get iso valves with flat face on the outlet side my merchants do them, use them all the time

[@MJTiffPlumbing]

Yep you can 👍🏼👍🏼

[@peterzmuda]

Hi mate I usually file the end of the service valve to flatten the end to connect the tape

[@MJTiffPlumbing]

A few people do that….👍🏼👍🏼….. I’ve never needed to, just don’t over tighten them is my way

[@keithcampbell7214]

Another good video with useful knowledge being shown, yes would love to see what goes on behind the scenes making these videos.

[@MJTiffPlumbing]

Thanks as always Keith…. Seems like a few people would like to see just what goes on👍🏼

[@chrisholt2474]

Hi Mark, I have never seen that kind of boiling tap before, so it’s another school day for me also, I am always happy to learn. I’m not a fan of any of the boiling taps, they appear to have too many bits to go wrong, maybe I’m just too old fashioned now and set in my ways? Thank you for another educational film, seeing you editing a film would be interesting for me to see the process etc. Take care, regards Chris. 👍👍👍

[@MJTiffPlumbing]

Thanks Chris…. Yep a few people want to se just what goes into it

[@getbry7452]

Thanks for sharing, Mark. I'll know to look out for one and what to do. Good man! 👏🏻

[@MJTiffPlumbing]

Your welcome mate👍🏼

[@mickobyobrien2650]

Great video mark, good info on that under unit heater,no come across one of those yet,I normally file the thread flat on a service valve to remove the sharp edge then fit Flexi hose onto it,but as you've shown the washer can split if you overtighten the connection.👍

[@MJTiffPlumbing]

Thanks mate, yep new one on me

[@terrysmith4608]

Yes Mark, a behind the scene insight would be nice, just so people can see how much work is involved, and still having to do the bread and butter work 👍🏾

[@MJTiffPlumbing]

Thanks Terry….. yer I think people will be surprised

[@phil18751]

I always attach flexys to ballafix where possible. Never had i problems either. I give the a quick file to flatern any sharp edges.

[@MJTiffPlumbing]

Yep I’ve never had an issue

[@Matt-pc5nb]

Eye balled you in town today, how long have you had that great number plate.😮

[@MJTiffPlumbing]

Where was I??… Had that plate about 6 years now

[@nickcollins7568]

I have fitted one of those Franke taps before. Heater tank was just like that and fitted in bottom of cupboard. Never occurred to me to put it under the plinth. Did have an issue the safety valve constantly dripping water though. Had to fit a pressure reducing valve which solved that problem

[@MJTiffPlumbing]

Yep they had exactly the same issue👍🏼

[@tonymurff5234]

That was definitely an interesting one Mark, taps are now over engineered 😂 😎👍🤜

[@MJTiffPlumbing]

Ain’t they just 🤣🤣

[@craigs66]

Nice one Mark.

[@MJTiffPlumbing]

Thanks mate

[@craigs66]

@@MJTiffPlumbing very clear - thanks a lot for sharing mate.

[@mattundercoat]

Thanks for that, Mark. I’m not saying the local water’s hard but it just came out the tap and nutted me for looking at it funny.

[@MJTiffPlumbing]

Hahahaah brilliant 🤣🤣

[@thomascoyne157]

Liken the panel very Tidy👍👍👍👍👍

[@MJTiffPlumbing]

Nice touch isn’t it

[@ian.M440]

Nice job

[@MJTiffPlumbing]

Thanks Ian

[@waynehardiman5443]

Just watched your cleaning advert lol FairPlay mate get some discount codes to us for the wipes 😜

[@MJTiffPlumbing]

What cleaning ad???….

[@tkthebear984]

Interesting video Mark. I’ve never seen the point of a boiling tap as they’re quite expensive to run. Working under a kitchen sink is a pain as there’s always a lot of going on underneath. It would be great if you did a video on what goes on when you edit your stuff to get the final product 👍🙂

[@MJTiffPlumbing]

Thanks mate…. I think I will as a few people have asked about it👍🏼👍🏼

[@mikeedwards7173]

Good idea Mark. Show us how you make your videos for YT. Yes I'm subscribed, not an issue.

[@MJTiffPlumbing]

Thanks Mike…. A few people want to see what goes into to👍🏼

[@davidmelton7574]

I like the tap kit

[@MJTiffPlumbing]

Thanks buddy

[@robertpeters8531]

Excellent video, yes I’ve done it loads of times emptied the trap down the sink lol that’s where the foldable bucket comes into its own. Also that tap wrench kit makes life a heck of a lot easier. Just wondering the press kit you have does that mean you don’t do any soldering now Mark or had it just cut down the amount of soldering you do and also do you think it’s a good job the press kit. Cheers brill video always learning from your channel. Keep up the good work.

[@MJTiffPlumbing]

Still do soldering mate….. and plastic… this is just another tool for certain jobs. I find it a lot quicker and tidier

[@gmhandymanpropertyservices]

Love to see how you edit videos mate, please can you do a video on it

[@MJTiffPlumbing]

Thanks mate…. Seems like I will as a lot of people are saying yes

[@gmhandymanpropertyservices]

@@MJTiffPlumbing probably give me a few tips on what I’m doing wrong 😑

[@MJTiffPlumbing]

It’s a learning curve mate

[@barryckemp907]

Mark great work and problem solving. True to say that we learn constantly. What press gun is that please? Cheers

[@MJTiffPlumbing]

Thanks mate……. It’s the Novapress gun👍🏼

[@Ragnar8504]

Kitchen fitters are mostly joiners by trade so for tasks that are outside their main field of expertise they use what they consider the easiest to install.

[@MJTiffPlumbing]

Correct

[@cynt1111]

when the kettle taps came out the first couple i fitted were the behind the plinth type. just buy a kettle , you can get one for £30😁

[@MJTiffPlumbing]

That’s just what they are doing now👍🏼

[@corkion]

yes give us a behind the scenes vid

[@MJTiffPlumbing]

Thanks mate….. will do

[@johndevlin980]

Thankfully I live in gods little acre, Cheshire, soft water all the way here 😅😅

[@MJTiffPlumbing]

You are blessed mate

[@dilligaf2386]

😂 looks like spaghetti junction under there. Good video

[@MJTiffPlumbing]

It did when that back board came off

[@grahamfoster9404]

Did my eyes deceive me or did you have to turn the cold valve around. Good video mate never seen one of those, serviced and installed Quooker units that one would have made me scratch me ed . I like that compression kit.

[@flashheart7675]

I have one for under kitchen kick boards Does it count if you went to a fault washing machine and find a rat bitten into the cable turning itself into a intermittent conductor but also managed to get itself clamped to the cable with a rat trap which came first the trap or 240v we will never know

[@MJTiffPlumbing]

No way😮😮😮😮

[@riptiz]

Hi Tiff, what suppliers do you recommend for kitchens and bathrooms? Just refurbing my house and would like some decent gear. Thanks.

[@MJTiffPlumbing]

Take a look at QX line of stuff, never had an issue. Just depends how much you want to spend tbh

[@riptiz]

Thanks a lot buddy. Won’t be cheap with my wife. lol.

[@paulbentley7815]

Why use 2 shut off valves on the cold feed.? I’m not a plumber but in my experience the smaller valves leak after time especially as you said the water is hard. There are fittings that go from 15mm to tap tail

[@MJTiffPlumbing]

The cheap ones leak….. these are fine👍🏼

[@DR23184]

Already Subscribed, but great video.

[@MJTiffPlumbing]

Thanks mate👍🏼👍🏼

[@xmasterwrightx9580]

Are the quooker taps CE approved yet ?

[@MJTiffPlumbing]

Dunno mate, don’t fit them…. Whats the issue with them??

[@mdocko2285]

Noticed a few of them speedfit fittings werent locked? Should be ok but run the risk of them pooping off. Kitchen fitters for ya 😂

[@MJTiffPlumbing]

Yep you know what they are like….. tbh I didn’t notice. If I go back I will lock them off

[@TheTW11]

I didn't realise that about subscribed viewer numbers. Sometimes I'm not logged in to KZbin cos it doesn't seem to take much for me to be logged out. But I'll still watch some of my channels. I'll get myself logged-in in the future.

[@alansmith9412]

Some flexis come with plastic washers that leak on ballofix’s

[@MJTiffPlumbing]

I’ve never had one leak…. Just don’t tighten them to much

[@nauticalmandems]

I swear i've taken out more boiling taps than put in, same with the trend of sink waste disposals. New builds love putting them in but after a year or so they end up being more trouble than they're worth in hard water areas

[@MJTiffPlumbing]

Yep I’ve removed a few recently

[@PppZzz-zj8bp]

I have qettle one . 4 years now and will never go back to standard tap. I replace filter every 6 months and never had any issue .

[@AndyHillier-r2n]

More Mark therapy 😊

[@MJTiffPlumbing]

Hahah 👍🏼👍🏼👌🏼

[@lizardfuel9]

Should've put a water softner in lol

[@MJTiffPlumbing]

Will be at some point lol….

[@simmo321]

I'd like to see a video of how KZbin works 👍

[@MJTiffPlumbing]

Thanks mate… will put one together

[@3george136]

Those electrical outlets are not very accessible in a hurry if needed.........

[@MJTiffPlumbing]

I agree…… kitchen fitters for you

[@michaelanderson2689]

You doing the bathroom at this house? Wondered why they got toothbrushe and toothpaste on the window sill 😂

[@MJTiffPlumbing]

Didn’t even notice that 🤣🤣

[@glyndavies591]

Did you have half the contents of your van in the kitchen to replace the tap ha ha

[@MJTiffPlumbing]

Hahahah…. That video is coming soon, 🤣🤣

[@davidgrainger-tm1ko]

yet again havnt seen this before i dont fit many but never come across this and spend half my life under kitchen sinks

[@MJTiffPlumbing]

Yep was a new one on me aswell buddy 👍🏼👍🏼

[@56ty78ui]

Speedfit City! Would be great for new uploaders to see how much work goes in Mark, behind the scenes. I cannot fathom how peeps watch and not subscribe. It's FREE people. It can only be they are scared of thinking otherwise?

[@MJTiffPlumbing]

Thanks mate……. Yep when I looked I was surprised, so thought I would ask🤣👍🏼

[@chriswatkinson93]

Are you even a plumber if you haven’t emptied the trap back down the sink?

[@MJTiffPlumbing]

Exactly that 🤣🤣👍🏼

[@Meath123]

I enjoy the content part of the videos but the double intros (one in kitchen, one in van) to pad out the videos is killing the watchability. Would love to see a full days jobbing video.

[@MJTiffPlumbing]

Videos now have chapters so you can skip the van bit if you don’t like it buddy👍🏼👍🏼……. That’s the beauty of KZbin. I’m hardly “padding it out” buddy People like the van chat that’s why it’s back👌🏼

[@SuperWayneyb]

🤘😎🤘🫖☕️🍪🎥👍👍

[@MJTiffPlumbing]

Evening mate

[@SuperWayneyb]

@@MJTiffPlumbing Evening Bud 👍😎👍

[@danfrancis1984]

Had u stumped? Really? Lol

[@MJTiffPlumbing]

Hahahah…. Honestly🤣

[@Purebeltersteve]

Why does noone say subscribing pushes content out so i can make more money. Dont understand why people wouldnt say that. When i make a plumbing channel il be saying exactly why i want people subscribing. 😂😂

[@Tom_Plumb_PHS]

Yepbwe benefit from free content, Mark makes money, everyone wins😊

[@MJTiffPlumbing]

When you make a plumbing channel you will see….. it’s not just about making money buddy….. You will see when you have a go😉

[@Purebeltersteve]

@@MJTiffPlumbing i know, think of the sponsorship deals you can get, make a good little amount off that alone lol

[@tigercoatings7092]

Purebeltersteve, before you post on this channel, you need to get out of bed. The keyword to this chanel is entertainment. You've been watching too much Eastenders.

[@tigercoatings7092]

Top video mark 🎉