pop up camper roof restore part 3 reassemble insulate paint

[@maximosseas4377]

Man, y’all did a good job, probably waaaY BETTER THAN, the place where people takem to be fixed!!! Good work man!!! Take care y’all

[@Robinson-Homestead]

Thank you so much for the comment.

[@fzyo0001]

You need a part 4!

[@Robinson-Homestead]

Sorry.

[@theHOONeybadger]

Kevin, just wanted to say thanks for making these videos. I am about to rebuild my roof on my Coleman Evolution E3, and your videos are by far the most in depth and informative one's I was able to find!

[@Robinson-Homestead]

Thank you Justin lots of work but you can do it just take your time.

[@davidfogleman8532]

how did your project go? i just picked up an 06 starcraft 3608 for $100 and im just about to start reconstructing the roof

[@santoscristal87]

Hey Justin, I have a e2 evolution. How did it go for you?

[@xc7049]

I think this is how the Rustic Trails Teardrop and Runaway Camper families got started. Great job!

[@Robinson-Homestead]

Maybe one day.

[@dirtybee6454]

Man, you are a “can do” family! Great job all!!!

[@empiredoors]

Just an FYI for the future, to remove the styrofoam insulation you can put some acetone in a squirt bottle and spray it on. The foam will instantly dissolve and come right off.

[@chadi7173]

Good trick!

[@leaannbryan945]

I have been remodeling my popup camper. This has been really hard for me. I have most of my camper completed. Thanks so much for the video. You did an wonderful jov.

[@Robinson-Homestead]

Thank you glad to help

[@joeywarren3576]

Thanks for making these videos! We're getting ready to tear our pop up apart and it was really helpful.

[@Robinson-Homestead]

Glad it was helpful! thank you for the comment.

[@jerryschneider145]

To seal pin holes in the aluminum, use Gflex epoxy mixed with chopped fiberglass or fiberglass cloth. I use it to patch boats all the time.

[@Robinson-Homestead]

Great tip! Thank you.

[@Hatch61]

The family is going to be camping in style when you all are done. Thanks for inviting us over to watch the process. Be well my friend.

[@dannydunnagan3267]

Looks good Kevin the whole family did a great job we rebuilt one 26 years ago.

[@DesignBuildFixReview]

Maybe coat all wood in some kind of water proof sealer before nstalling to stop rot and mold and such.

[@MrROOKIE49]

I love how the whole family is helping

[@Robinson-Homestead]

Work as one makes it easy we will never forget this project.

[@lostintime8651]

if they don't they get beaten

[@KE4YAL]

Y’all are getting right along with this restoration it looks great 👍

[@Robinson-Homestead]

Thanks Jerry.

[@ronsites2694]

Hey Kevin, great job! Y'all are becoming professional camper repair people. A great family project.

[@Robinson-Homestead]

Love them projects.

[@williammcguire3rd]

Looking good Kevin. Got the whole family in on the repair. LoL

[@landerwyoming9720]

Awesome work - great job everyone, thanks for sharing!

[@Robinson-Homestead]

Thank you for the comment.

[@robw748]

Fantastic job everybody.

[@bosse641]

Looks very nice. Well done guys.

[@sheilabowers7532]

Y’all did a fantastic job on that Kevin enjoy the video keep them coming and I’ll keep watching your friend G. Man

[@Robinson-Homestead]

Thanks G-Man

[@PaulDGreen-bu4iz]

Nice progress Kevin! Thank you for sharing!

[@pointer8222]

Good job everyone

[@strongsadventures]

Great job y’all.

[@rocketritch]

what did you use to support the rounded corners where there was originally some type of insulation jammed in there? I'm currently working on a roof myself.

[@brentlane4877]

Awesome work! I need to get our Coleman popup top redone like that. Just wish I had away to do it

[@Robinson-Homestead]

It's hard work but you can do it Brent.

[@thomasarussellsr]

Looking pretty good, Kevin an crew.

[@Robinson-Homestead]

Thanks Thomas.

[@jaya.0069]

Nice job, lookin like new money there!!

[@Robinson-Homestead]

We will be getting the rubber roof soon it will be nice.

[@mickfalvey6045]

Very well done guys... also very motivating 🍺 Cheers

[@Robinson-Homestead]

Thank you Mick.

[@peterscott8598]

Great videos!! had to find start to finish ceiling replacement for these Fleetwood campers so thank you so much for doing this! I have one question on the 1/4 round pieces with the channel grove for the wiring. Where did you find those pieces? What size are they. Thanks so much!

[@Robinson-Homestead]

Not sure but I think those were the original pieces to the roof. I'm sorry I'm having a hard time remembering.

[@marcuswilloughby5529]

Repairing mine now,what is the best glue for the foam board? I'm doing mine with the roof attached

[@Robinson-Homestead]

I can't remember what I used sorry.

[@travisgray3331]

Thank you for the video...was wondering if there is a part 4 for how to put the canvas back on?

[@Robinson-Homestead]

This is the only I have after the build sorry Travis. kzbin.info/www/bejne/p2nIqIyGp5eDZ9k

[@thomasmcgee3025]

Did you guy's finish the camper?I just started tearing into our camper. Valuable information, thanks

[@Robinson-Homestead]

It was my son's project he did finish it.

[@Robinson-Homestead]

It was my son's project he did finish it.

[@Marksause]

Hey Kevin! Is the roof bowed at all or is it completely flat? When you glued the big prices and the styrofoam was it at a curve???

[@gregoutdoors7]

👀 good 👍🏻

[@braylens1822]

The weight on that is probably crazy heavy. Good luck with the lift system

[@Robinson-Homestead]

Still working great thanks for the comment.

[@tionsean]

Thank you for sharing your process. How did the weight of the roof change from before to after? It seems like you might have added more by replacing styrofoam with plywood on the sides. Did you ever put the rubber roof on? I'd love to see the next step of putting it back on. Really nice work! Thanks again!

[@Robinson-Homestead]

He the same stuff I used on my cargo trailer camper to seal the roof the weight not bad it worked out great not to heavy.

[@tamiczerwinski7138]

Is there a next step video? Would love to see a video 4 if there is a one of it all out back together and how ya did that. These videos were so in depth. We are doing research for the spring so we can restore our roof before we put our new canvas on.

[@callieharper]

What are the wooden strips called at 7:33? We need to replace ours in our popup camper as well, but I'm having a hard time searching for them. Thanks for the great videos!

[@Robinson-Homestead]

Do you mean for the wiring?

[@kingsoulsurfer41]

What happened to the rest where is part 4

[@Robinson-Homestead]

Sorry

[@RicardoHarris]

What rubber did you use for the roof ?

[@Robinson-Homestead]

Sorry that was many years ago and i can't remember.

[@kewshi]

I was really hoping to see how you I stalled the rubber

[@Robinson-Homestead]

Sorry kewshi I was on vacation when he did it.

[@kewshi]

@@Robinson-Homestead did you put the rubber on it?

[@mten8965]

👍😎

[@Robinson-Homestead]

Thanks M Ten.

[@johndi1962]

Looks good but you have to watch the weight you don't want to start breaking the cables that lift the roof.

[@zzz7zzz9]

I would imagine there's no worries. I have a bonair 1400 that has a tank of a rooftop. It actually has a bunkbed that is attached to the rooftop. It's steel-built, and scissors up into the roof when not being used. Super-heavy. And, my trailer has hard walls that fold down as the roof is dropped, and raising the roof, raises the walls with small cables attached to them. It's an '80s model, and is still going strong in 2024.

[@TheAztexan]

Nice job! Do you think it would be worthwhile to fabricate 3/4-inch aluminum frame for the roof?

[@Robinson-Homestead]

Not sure.

[@kennethgazella2633]

How many sheets of plywood and sheets of foam and sheets of lauan did it take. I'm restoring my 1986 jayco king 6. About how long did it take just work time, how much did the weight change?

[@Robinson-Homestead]

I will let brandon answer this he will let you know.

[@N4SFU]

Where did you get the wood strips to insert between the roof and wall?

[@Robinson-Homestead]

I stripped them on the table saw

[@randyhutch50]

Did you check into marine grade plywood?

[@Robinson-Homestead]

Might be Too heavy Randy.

[@krissbbyxo5914]

How much did it cost to fix the roof? I have a pop up and am in the process of remodeling her

[@Robinson-Homestead]

Not sure I would have to ask my son.

[@michaelmiller2483]

How long from start to finish? I have to do mine .

[@Robinson-Homestead]

My be a week not for sure.

[@fernandobullon430]

How was it with the weight, was it to heavy for the cables

[@Robinson-Homestead]

All good so far working great.

[@robertajburns]

How many hours do you think you put into the project?

[@Robinson-Homestead]

About 3 days thanks for the comment.

[@robertajburns]

Kevin Robinson I think I only have to do the roof overhangs as I didn’t fall through it cleaning the top. Thanks for the tips!

[@1552mjp]

I think you need more practice……I have a Fleetwood that has a rotten roof. Interested?

[@kennethbrown8013]

Where did u get new molding at?

[@Robinson-Homestead]

I'm not sure I will ask him for you.

[@kendeboer2686]

Thanks for the videos. We are also curious about this...

[@timrandall4659]

Where is part 4?

[@Robinson-Homestead]

Hope this helps Tim kzbin.info/www/bejne/p2nIqIyGp5eDZ9k thanks for watching.

[@tylersheehy3918]

Why put a TV on

[@Robinson-Homestead]

Thanks for the comment and watching