Portable Airbrushing just got more Powerful from I-BEAUTEE

  Рет қаралды 79,805

Airbrush Asylum

Airbrush Asylum

Күн бұрын

Пікірлер: 148
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Airbrush Quick Connects should you buy one ? 🤔: kzbin.info/www/bejne/hKiwoZ6sbdV-mNk
@peterdeighton3304
@peterdeighton3304 3 жыл бұрын
So nice to have a some one who really knows what there talking about for change instead of not really having a clue
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Thank you so much glad you enjoyed the vid, just keep in mind that actual psi spray out is more like 18-20psi not the battery output of 32psi as listed I cleared this up in my artwork video, but just wanted to let you know …that said it’s still a great little unit 👍🏻
@Stainlessgamer
@Stainlessgamer 2 жыл бұрын
Just FYI, these things can be dangerous. Was using a Funnel kit, from Newtype, for the past 2 months, with a total of barely 5hr total run time. It had a catastrophic failure where the compressor got stuck on, and I couldn't turn it off. even detached the airbrush from the unit and it kept going. As I tried to get it to shut off, it heated up to the point it burned my hand. I had to grab gloves and my multitool to open up the unit and cut the power lines. The battery itself was so hot I was worried it was going to explode, and it probably would of had I not removed it from the unit.
@AceEquality
@AceEquality 2 жыл бұрын
Thanks... I won't be getting this, then 👍👍
@ballzy2011
@ballzy2011 Жыл бұрын
Unfortunately everything battery operated can suffer the same failure. You can't really knock a product over one failure.
@michaciemniewski9791
@michaciemniewski9791 Жыл бұрын
I have one and used it for several hours. Very good tool.
@LemurKrazy
@LemurKrazy 8 ай бұрын
Battery is easily removed from the one shown in the video.
@stefanblackadder5236
@stefanblackadder5236 3 жыл бұрын
I ordered one of these based on your video. Difficult to beat the price especially since all of my tool decisions and costs have to be approved by the Jedi counsel.
@mactivityproductions211
@mactivityproductions211 2 жыл бұрын
How do you like this airbrush?
@stefanblackadder5236
@stefanblackadder5236 2 жыл бұрын
@@mactivityproductions211 it actually works pretty well. I ended up upgrading to a better compressor but if you’re on a budget this is a good choice.
@mactivityproductions211
@mactivityproductions211 2 жыл бұрын
@@stefanblackadder5236 Ok thanks
@stefanblackadder5236
@stefanblackadder5236 2 жыл бұрын
@@mactivityproductions211 the airbrush is surprisingly good I’ve used it quite a bit. I only upgraded the compressor because it was on sale at harbor freight and I got permission from the Jedi counsel haha.
@designertjp-utube
@designertjp-utube 2 жыл бұрын
Nice! I feel frames 2:51 was the *money* *shot* for this spectacular product. Saw myself Airbrushing T-Shirts on the beach just wearing briefs & flip flops.
@jaydenedmand3514
@jaydenedmand3514 3 жыл бұрын
Very keen to see some art work with this unit and might be a great addition to my regular compressor aswell.will be definitely purchasing one of these I like the fact you can hook it up with a hose too and any airbrush thats a very handy feature
@rdfjfgjyfdhfghy67456
@rdfjfgjyfdhfghy67456 8 ай бұрын
Thank you for your detailed review! This was really informative!
@AirbrushAsylum
@AirbrushAsylum 3 ай бұрын
You are so welcome! 🤗
@patholloway2305
@patholloway2305 Жыл бұрын
I am new to doing airbrushing, there are so many out there, I don't have a clue to what would be best for a beginner. As I get better I can buy a better one, I am leave how to custom sneackers and an airbrushing would make it so much easier.
@hafizal3701
@hafizal3701 3 жыл бұрын
Please make a full review of it.. make 1 skull for example... super curious of it capability... please??🙏
@sean3278
@sean3278 3 жыл бұрын
would it be possible for you to make a detailed video on making paper templates?
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Yep ..can do, I will put it in my topic planner appreciate the request.
@jhebertutube
@jhebertutube 3 жыл бұрын
I bought one of these under another brand name, but same features, protective film sticker, and probably insides. About 30-40 minutes of on and off use in my first session it shut off and would not turn on anymore. Plus it was hot. I let it cool and recharged it, thinking it was just out of power. When I turned it back on, it would NOT shut off. With or without the hose, it would no longer shut off once switched on. This was my first foray into airbrushing. The product concept is awesome. But out the gate, it’s not ready for prime time. I’ll wait and see how much next year’s models have improved. BTW, there is no company information to contact for support or parts, so you may be on your own after purchasing. I didn’t care to be stuck with that situation, so it went back. If you can, I’d suggest a typical brush session until the unit reaches its shutoff point. Curious to know if this is a broader design flaw or maybe i got a bad unit in the batch.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Thank you for sharing and sorry to hear that you have had some issues. I have had the previous model for approx 1 year now (one without the hose) by the same manufacturer and it has performed well and so far no issues. I will be testing this one further when I do a video showing it create artwork which should really put it under heavy use and test the battery etc..
@lu3tz
@lu3tz 2 жыл бұрын
Basically the same thing just happened to me. Same model, just from a shop that slapped it's own logo and packaging on. Worked great for two sessions, then it is not working with the dual action on/off anymore and is constantly running. Additionally there's no air pressure anymore and it creates this "electric motor" stink when running. But for those two sessions it worked like a charm!
@chrisphilip
@chrisphilip 2 жыл бұрын
I love this product, I will love to purchase 1of the IBeautee Air Brush kit, I'm from Trinidad and Tobago West Indies, about next week, Friday, do you have any of these for sale in my country??? Trinidad and Tobago West Indies??? Let me know...
@DreamRex
@DreamRex 3 жыл бұрын
What kind of paint where you using and can I use createx to paint on a hard surface with this I'm new to airbrushing so trying figure what works and what doesn't
@tastenheber
@tastenheber 2 жыл бұрын
I got the same one. The battery part seems a bit lose... I wonder if it can be unplugged and replaced. It feels like there is some kind of clamp or solid connector inside, but I didn't wanted to damage it by pulling to much.
@lamarp6230
@lamarp6230 3 ай бұрын
Would this be a ok airbrush to customize shoes with
@MrKnoxville9
@MrKnoxville9 3 жыл бұрын
I bought 2 I-beautee units, one for my son and one for myself… after only two weeks of what I’d say was medium use the compressor kicks in every whether the trigger is depressed or not, making it a really noisy environment to try and concentrate in while painting… I wrapped all fittings with ptfe plumbers tape but nothing changed, and now my sons is doing exactly the same, I really like everything about it other than it being almost unbearable to use unless I wear headphones. Has anybody else had similar problems or have any ideas of how to fix the problem? Thanks.
@Francois997.2
@Francois997.2 Жыл бұрын
Clean the trigger ?, I don't have the same problem but I noticed that paint (dry paint) obstructed the trigger, after a deep clean all functioned as if it was new.
@DisVietVetUSA
@DisVietVetUSA 2 жыл бұрын
Great video, I have some cheap brushes, I will give this a try
@DoubleOTEN
@DoubleOTEN Жыл бұрын
Which was better with or without the hose on ?
@HaZeTJ
@HaZeTJ Жыл бұрын
could you show everyone what a well polished and set up cheap airbrush can do compared to your more expensive ones? I know I can get hair line performance from my cheap Chinese guns, so I'm more interested in knowing where it would be outperformed by the more expensive guns.
@AngelOrtiz1
@AngelOrtiz1 Жыл бұрын
I bougth two of them similars Neoeco and casubaris not enough preassure only 20 Psi working presure very poor so dissapointing hopping this shoots better?
@BC-ni3sk
@BC-ni3sk 3 жыл бұрын
As of Oct. 9, same day as this is posted the unit is no longer available and Amazon don't know if it will get it in stock again!!
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
As far as I am aware stock should be replenished in 3-4 weeks feel free to get in contact with them via www.sino-airbrush.com and you may be able to put your name down to secure a unit when it becomes available 👍 Get in contact with Clarence as he is my contact and is the one who arranged this sponsorship. I hope that helps.
@mallorikerr4092
@mallorikerr4092 2 жыл бұрын
I have an off brand version the only down side is that I wish it had a raised ring around the power button. I put mine in my make shift spray box and either my 12 year old messed with it and wore the battery down to full dead or it got turned on when I moved everything. I have a logo stencil to test for my husband's business, and darn it all the battery was dead. Otherwise it's awesome when I only have a couple of earrings to paint. I do have a regular airbush compressor coming.
@waynefox897
@waynefox897 2 жыл бұрын
Just bought one of these myself from Amazon. Thinking its faulty as the compressor doesn't run constantly during use, like yours. Mine is Stop, start, stop, start, stop, start while pressing down on the feed button
@myogetsu666
@myogetsu666 3 ай бұрын
is it still working after 2 years?
@tonytone0083
@tonytone0083 2 жыл бұрын
Is there any indicator when charging? How do you know if its full or not?
@DrifterST
@DrifterST 3 жыл бұрын
Which quick connect must one buy? I various types.
@larrystipe3170
@larrystipe3170 3 жыл бұрын
New subscriber and a true beginner Have not bought my first air brush yet so my question is what is the best needle size for a beginner for example in your rivet and rust video what is the best size needle to do such art work Thank you
@NaughtyGoatFarm
@NaughtyGoatFarm 2 жыл бұрын
Would this be suitable for painting 1/10 scale off road buggy shells?
@mikeszczutkowski3066
@mikeszczutkowski3066 3 жыл бұрын
Can you use the compressor while charging?
@josephgreco7317
@josephgreco7317 3 жыл бұрын
Yes
@Th0tSlayer348
@Th0tSlayer348 2 жыл бұрын
I just had an idea. Do you think I can use this for hours if I connect the battery to portable charger
@johncater7861
@johncater7861 Жыл бұрын
I have bought a TM-80S (basically the unit in the video) from a popular online marketplace. The "owner's guide" doesn't give any details on what the components are and doesn't provide any details on how the unit should be dismantled and cleaned. Perhaps there is a PDF somewhere? Also, these things might be advertised as 32psi but are actually nothing of the sort - more like 15psi.
@bdee1084
@bdee1084 6 ай бұрын
Is there anything that’s come out since this?
@cemdrahsan270
@cemdrahsan270 2 жыл бұрын
How about the battery life after 100-200 charged..?
@desmoresimpson5926
@desmoresimpson5926 Жыл бұрын
How do I get it to spray? I try with water and I can't get anything to come out. What am I doing wrong?
@AirbrushAsylum
@AirbrushAsylum Жыл бұрын
If it’s not spraying check out this video which should help ; kzbin.info/www/bejne/gIGbdXynYr6mmcU
@bobafett2243
@bobafett2243 2 жыл бұрын
Can you control the air pressure or is it just constant 32 psi operating pressure?
@Euthymia2020
@Euthymia2020 9 ай бұрын
How many minutes does it usually last for do you know? And charge time?
@LemurKrazy
@LemurKrazy 8 ай бұрын
20-30 minutes spray time. 5-10 minutes charge time with usb C fast charger. Does overheat so got a 2nd - when one is charging can continue with the other.
@teryenteryen1326
@teryenteryen1326 3 жыл бұрын
I tested the compressor. 6 liters per minute, but only 20 PSI :-(
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Thanks for the info I will do a test as well and report my findings in my next video 🤔👍🏻 it’s still definitely more powerful than its predecessor.
@teryenteryen1326
@teryenteryen1326 3 жыл бұрын
@@AirbrushAsylum What does the predecessor look like?
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
@@teryenteryen1326 it looks like this 👉🏻 kzbin.info/www/bejne/pofQdnmFiNqfgJo
@JohnColgan.
@JohnColgan. 3 жыл бұрын
I'm new to airbrushing, what is the Mac valve on the underside/front of the unit?
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Welcome to airbrushing and thanks for your comment, take a look at the following vid which should help you better understand the MAC valve and its uses ;) kzbin.info/www/bejne/aHKQZY1_iM2Ye5I
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
well said thank you 👍
@TheEpicSpire
@TheEpicSpire 2 жыл бұрын
How long does this unit last? i have seen reviews for this type of unit that say that they were only able to charge it once or twice before the device just quit holding a charge. can you give me an update review?
@badboymowersofnorman6011
@badboymowersofnorman6011 Жыл бұрын
What is the brand and where do i get it?
@danrussell3439
@danrussell3439 3 жыл бұрын
Excellent review
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Thank you so much 👍
@DannyCroughs
@DannyCroughs 3 жыл бұрын
Cool, i had also an ability to order one, but didn't do it, how long can you work with this one before you need to reload the battery, and how long it needs to reload? Thx
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
From the instructions it runs for 40-60 mins (you can use it while charging) and charge time is 90 mins, I will test this in the next video showcasing how this unit goes when creating artwork.
@riboairbrushmanufacturer3832
@riboairbrushmanufacturer3832 3 жыл бұрын
After fully charged, it can work for 40-60 minutes.
@DannyCroughs
@DannyCroughs 3 жыл бұрын
@@AirbrushAsylum super, thanks man 👍🏻👊🏻
@DannyCroughs
@DannyCroughs 3 жыл бұрын
@@riboairbrushmanufacturer3832 thank you 👍🏻
@dkae92
@dkae92 3 жыл бұрын
I bought one of the spray gunner cordless airbrushes and it’s ok but could use a bit more psi. You said this one is stronger? Do you recommend this more then you recommended the spray gunner one?
@dazzamac70
@dazzamac70 3 жыл бұрын
Any chance of seeing how it performs with a siphon style airbrush as they generally need more air volume to draw up the ink/paint (working against gravity)?
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Great suggestion, I actually don't think I have a siphon feed handy, however if I can dig one up then I will definitely do so.
@imrozgill9711
@imrozgill9711 9 ай бұрын
that great .. i saw another vedio in which the person could not use quick connect with the hose ..
@LemurKrazy
@LemurKrazy 8 ай бұрын
Can use this one with quick disconnect - works fine.
@vetteman892000
@vetteman892000 3 жыл бұрын
How long is the battery life on a unit? The Amazon site says 40-60 minutes. Do you think it will last that amount of time?
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Thats what the manufacturer determines, it also says in the manual that it can be used while charging and charging takes 90min, I will test all of this in the more detailed vid when I use it to create some artwork .
@riboairbrushmanufacturer3832
@riboairbrushmanufacturer3832 3 жыл бұрын
Yes, it can work 40-60 minutes. Thank you.
@vetteman892000
@vetteman892000 3 жыл бұрын
Do you think you can do a “how to” video on how you prep your canvases for airbrushing? All the best! Mike
@lappin6482
@lappin6482 2 жыл бұрын
wow awesome little unit
@davidsanchez-hq5ty
@davidsanchez-hq5ty 2 жыл бұрын
Would this work for touchup paint on cars?
@fpvrcstuff
@fpvrcstuff 3 жыл бұрын
Looks like a neat unit. I would just be concerned about the life span of the pump and seals. Did you hook up an air gauge to see if the unit was putting out the claimed 30psi and does it maintain that pressure during a session of painting and how long will the charge last? Good review.....
@riboairbrushmanufacturer3832
@riboairbrushmanufacturer3832 3 жыл бұрын
Pressure of the the compressor is 30-32PSI. But you know, it will be a bit low when connect with airbrush. But it's the highest pressure in all portable compressors.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Thanks mate, no I didn't hook up a pressure gauge but that is a great idea . It does maintain psi when brushing, it really feels like you are painting as per normal, that said I felt that out of all of the brushes tested the ones that ran at a lower psi definitely worked better, but thats me being 'picky' lol. The manual says charge time lasts 40-60 min, and it takes 90 min to charge. It also says that you can use it while connected to charge, I will focus on more of these points when I review it further in a video creating an artwork. 🤘
@emrelee
@emrelee 3 жыл бұрын
@@AirbrushAsylum I wonder among the ones you tested which “lower psi” unit are you reffering to? Thanks
@jokinmyass9446
@jokinmyass9446 2 жыл бұрын
@@riboairbrushmanufacturer3832 the pressure drop only happens if you are using the hose, if you use compressor by connecting the airbrush directly to compressor unit there is virtually 0 pressure drop 😁
@mallorikerr4092
@mallorikerr4092 2 жыл бұрын
@@AirbrushAsylum it does work while charging but I don't recommend it unless you have roughly half battery life and need to use it for more than 30 minutes. It claims to work for 45-60 minutes on a charge.
@ezeNdog
@ezeNdog 2 жыл бұрын
Wow .. I'm out of date... Came looking for parts for my old, 2 lb electric motor compressor for my airbrush and didn't know these little guys existed... Great video... Don't know if I would keep it in my pocket, would get much done. lol j/k
@jeffpeters6561
@jeffpeters6561 3 жыл бұрын
My question with off brand airbrushes are replacement parts
@clanpsi
@clanpsi 2 жыл бұрын
Is it actually 32 PSI? Most equivalent products are only 18 when actually tested.
@kpmathis71
@kpmathis71 3 жыл бұрын
Sold out already? Shows "Currently unavailable" for me from this link. I mostly shoot acrylics so I'd love a touch more on the psi (40-50, especially since it has a Mac valve) but I'm sure that tortures the batteries. 40 min is not terrible though.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Yes I know... at the time of writing this product is showing (no stock) 😞 the manufacturer is saying that stock will replenish in approx 3-4 weeks feel free to get in contact with them via www.sino-airbrush.com and you may be able to put your name down to secure a unit when it becomes available 👍 Get in contact with Clarence as he is my contact and is the one who arranged this sponsorship. I hope that helps. In regards to the battery it is saying 40 - 60 mins, I will further test this unit in another dedicated video where I will use it from a full charge to create an artwork and we will see how long it lasts. 🤔
@kpmathis71
@kpmathis71 3 жыл бұрын
@@AirbrushAsylum Thank you! Very interesting, informative channel. I'm a total newbie with an AB, just picked one up last year really. I mostly use it to prime & base coat miniatures (Reaper, Games workshop, etc. 28mm figures). I don't think I have the fluidity to do the larger scale art you Excell at. But like to watch it made.).
@netnoob77
@netnoob77 2 жыл бұрын
Thanks for reviewing this. I am on the verge of buying one but am concerned on its longevity. How has yours held up?
@garthcombrinck7906
@garthcombrinck7906 3 жыл бұрын
Thats crazy cool man
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
I know they are improving the tech, I really think the need for compressors in the future will be gone and we may see a 'dyson' airbrush 👍
@NERO-ez1mn
@NERO-ez1mn 2 жыл бұрын
what about the vapor? what happen?
@gregsmith1719
@gregsmith1719 2 жыл бұрын
HOW DO YOU CLEAN IT!!!
@AirbrushAsylum
@AirbrushAsylum 2 жыл бұрын
Like any other airbrush, this video may help 👉 kzbin.info/www/bejne/bpXUpGqbgNKWac0 hope that is useful and thanks again for your comment.
@kkeithhhancock2309
@kkeithhhancock2309 3 жыл бұрын
I think Ill get back into airbrushing!
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
I hope so, thanks for the comment 👍
@PetrikNZ
@PetrikNZ 3 жыл бұрын
One issue I found with this particular unit is that there is no indicator on it for either showing that it is charging, or for how much battery power is left.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Yes you are right, the previous model by this manufacturer had the indicator lights which are helpful, perhaps this is something that they could include in newer models 🤔
@mwebb-01
@mwebb-01 2 жыл бұрын
Others are like that too. like my No Name one..
@charlysteiger
@charlysteiger 2 жыл бұрын
how long can you use it before getting condensation/water as I see no filter there?
@mikesprague
@mikesprague 3 жыл бұрын
Unfortunately, Amazon says it's unavailable...
@riboairbrushmanufacturer3832
@riboairbrushmanufacturer3832 3 жыл бұрын
Hi, products are on the way to Amazon's warehouse, you can buy it in around 10 days.
@mikesprague
@mikesprague 3 жыл бұрын
@@riboairbrushmanufacturer3832 thanks. What is the price?
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Yes I know...I am aware that at the time of writing it is showing (no stock) 😞 the manufacturer is saying that stock will replenish in approx 3-4 weeks feel free to get in contact with them via www.sino-airbrush.com and you may be able to put your name down to secure a unit when it becomes available 👍 Get in contact with Clarence as he is my contact and is the one who arranged this sponsorship.
@haji727
@haji727 3 жыл бұрын
I just looked it up on Amazon and this model is currently unavailable.
@riboairbrushmanufacturer3832
@riboairbrushmanufacturer3832 3 жыл бұрын
Hi, the products are on the way to Amazon's warehouse, you can buy it in around 10 days.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Yes I know...I am aware that at the time of writing it is showing (no stock) 😞 the manufacturer is saying that stock will replenish in approx 3-4 weeks feel free to get in contact with them via www.sino-airbrush.com and you may be able to put your name down to secure a unit when it becomes available 👍 Get in contact with Clarence as he is my contact and is the one who arranged this sponsorship.
@mrguppy1016
@mrguppy1016 3 жыл бұрын
Where is the link
@JFlyer1973
@JFlyer1973 3 жыл бұрын
It’s in the description.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
It is in the description but at the time of writing it is showing (no stock) the manufacturer is saying that stock will replenish in approx 3-4 weeks feel free to get in contact with them via www.sino-airbrush.com and you may be able to put your name down to secure a unit when it becomes available 👍 Get in contact with Clarence as he is my contact and is the one who arranged this sponsorship.
@jovanvojnovic194
@jovanvojnovic194 3 жыл бұрын
@@AirbrushAsylum what was the price, actually?
@f62darkstar
@f62darkstar 3 жыл бұрын
everyone posting and complaining saying out of stock....the red color is out of stock....but blue and black are showing in stock right now.
@Tony-rl2fr
@Tony-rl2fr 3 жыл бұрын
Very cool. Talk about a rocket in your pocket! Better hide it from the misses 😉
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Yep its pretty awesome 👍
@tommullinerart
@tommullinerart 3 жыл бұрын
@2:57 hahaha lol putting it "in your pocket" - I bet makes it a GREAT pleasure to airbrush for many!! 🤣 A good incentive for lazy artists perhaps?
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
lol, glad you enjoyed that part, the portability is just so handy...I take the previous model (one attached to the unit) with me to shows just in case I wash out all my brushes and forget to add a few highlights etc...I can easily wip out this unit, without the need to unpack the compressor etc..
@michaeltorres1692
@michaeltorres1692 3 жыл бұрын
Everyone, these are a dime a dozen on Amazon. Just under different brand names and colors. The majority I’ve seen are black, and then red. This is the first blue one I’ve seen. But they’re all exactly the same. I actually own 2 of these under the brand Anesty, but right now, I just saw 3-4 different branding of the same product. 3 black and 1 red. The ones I own in particular is called the Anesty AHPPro and it comes with a trigger style airbrush. I’m not trying to throw anyone under the bus, but if they can’t keep stock, I think it’s fair to educate.
@randomnickify
@randomnickify 3 жыл бұрын
Yes, they are made in the same factory, but some brands do have proper quality control while other brands sell... units that was rejected by other brand quality control, that's why I generally prefer to buy a brand that people have tested even if the similar product are available easier or cheaper on the market. :)
@michaeltorres1692
@michaeltorres1692 3 жыл бұрын
@@randomnickify Of course. You’re absolutely right. I just noticed that quite a few people seemed really bummed that they were out of stock. All of the ones on Amazon run around $60-$70. The company Spraygunner ( I’m sure you’ve heard of them) also took this little compressor under their wing and added it to their exclusive “NO-NAME” brand, and they sell it for about the same price. Spraygunner is a very reputable, honest company, and they say that while the company boasts about its 32PSI rating, the working pressure is more around 10-20PSI and it works best with detail airbrushes (smaller needle & tip sizes). Their observation of the unit is spot on in my opinion.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Thanks for your comment and info and yes, you are right there are plenty of options out there. I was happy to deal with this manufacturer as they have had history with other brands that I know, which gave me more confidence.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
appreciate your comment and hopefully this supplier will have stock in 3-4 weeks
@4759690
@4759690 3 жыл бұрын
yeah that looks good to me
@bentebrunsvelt319
@bentebrunsvelt319 3 жыл бұрын
Super i like that more test Please 🤪🤪🇳🇱
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
thank you and yes, a video showcasing this product creating an artwork will be coming soon .
@beylerbeyitas4319
@beylerbeyitas4319 3 жыл бұрын
Cool 👍🏽👍🏽👍🏽
@marcins5584
@marcins5584 3 жыл бұрын
hard to say a compressor in that thing.... it's just a blower inside
@kkeithhhancock2309
@kkeithhhancock2309 3 жыл бұрын
I didn't see a price on Amazon. And their sold out!! Their making this hard to buy. Lol
@riboairbrushmanufacturer3832
@riboairbrushmanufacturer3832 3 жыл бұрын
Hi, the products are on the way to Amazon's warehouse. You can buy it soon.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Yes I am aware of this, however the manufacturer wanted to proceed with releasing the video as stock is expected in 3-4 weeks. Feel free to get in contact with them via www.sino-airbrush.com and you may be able to put your name down to secure a unit when it becomes available 👍 Get in contact with Clarence as he is my contact and is the one who arranged this sponsorship.
@martinoconnor4314
@martinoconnor4314 2 жыл бұрын
The airbrush in the vid is no longer available in the link, the vid has been out for three months so what does this tell you about the quality of the compressor? 🤣
@Dave-sg6om
@Dave-sg6om 3 жыл бұрын
Really shits me when you get impressed by a product that's NOT AVAILABLE !!!!!!!!
@riboairbrushmanufacturer3832
@riboairbrushmanufacturer3832 3 жыл бұрын
Hi, don't worry, the products are on the way to Amazon's warehouse. You can order it soon. Thank you.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Thanks for your comment and I understand your frustration, that said the manufacturer did wish to proceed with this video's launch even though at the time of writing it is showing (no stock) 😞 the manufacturer is saying that stock will replenish in approx 3-4 weeks feel free to get in contact with them via www.sino-airbrush.com and you may be able to put your name down to secure a unit when it becomes available 👍 Get in contact with Clarence as he is my contact and is the one who arranged this sponsorship.
@Dave-sg6om
@Dave-sg6om 3 жыл бұрын
@@AirbrushAsylum Thanks so much for the response.
@Dave-sg6om
@Dave-sg6om 3 жыл бұрын
@@AirbrushAsylum I tried to contact the manufacturer directly as you suggested via email, but it seems nobody can be bothered getting back to me. It's a shame really because I feel I could have really helped promote this product here in Australia.
@rafyelartesano9543
@rafyelartesano9543 3 жыл бұрын
It's real nice but don't buy it from Amazon Amazon is going to be missing parts
@tim62744
@tim62744 3 жыл бұрын
Don’t do a review when it’s not available
@riboairbrushmanufacturer3832
@riboairbrushmanufacturer3832 3 жыл бұрын
Hi, the products are on the way to Amazon's warehouse. You can buy it soon.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Thanks for your comment and I understand your frustration, that said the manufacturer did wish to proceed even though at the time of writing it is showing (no stock) 😞 the manufacturer is saying that stock will replenish in approx 3-4 weeks feel free to get in contact with them via www.sino-airbrush.com and you may be able to put your name down to secure a unit when it becomes available 👍 Get in contact with Clarence as he is my contact and is the one who arranged this sponsorship.
@timandrew4515
@timandrew4515 3 жыл бұрын
Not so much a "review" as paid advertisement, plus you get a bonus if we buy the unit through your link. You didn't test manufacturer claims about battery life, charge time or delivered air pressure. Can't be unbiased and also paid by the company. If you're getting paid, them your opinion is bought. That's a no from me.
@AirbrushAsylum
@AirbrushAsylum 3 жыл бұрын
Understand your comment and yes, this is a sponsorship arrangement, that said the manufacturer hasn't asked me to make sure that I praise the product, I am giving you my honest feedback so far, as I am excited as to where these portable airbrushes are heading. I will be doing another video further discussing this product and going into more detail by using it to create an artwork. Appreciate your comment nonetheless and hope you gained some value from this video.
@dekenba6482
@dekenba6482 Жыл бұрын
Not exactly unbiased review....
@manwarhossain4390
@manwarhossain4390 2 жыл бұрын
How.maney.price.this.product
Is THIS the FUTURE of Mini Painting?!
19:31
Ninjon
Рет қаралды 446 М.
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 36 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Do I need to buy an expensive Airbrush
9:06
Airbrush Asylum
Рет қаралды 140 М.
SIMPLE tech. Battery draws on metal
9:15
Kirill Runz
Рет қаралды 17 МЛН
Bull Skull Airbrushed using iBeautee Battery Airbrush
20:24
Airbrush Asylum
Рет қаралды 25 М.
"Not Crap" Airbrush Vs. $1,000 Professional Airbrush...
17:23
The Best Portable Airbrush From Amazon?
14:08
Roads And Rails Hobbies
Рет қаралды 25 М.
We Bought This Cheap Airbrush So You Don't Have to
7:46
DeJesus Custom Footwear
Рет қаралды 178 М.
Cheap Airbrush Blew My Mind - Must Have!
11:08
ETOE
Рет қаралды 67 М.
"Ovaga", The Best "Quiet Airbrush Kit" On Amazon Right Now!!!
29:52
Roads And Rails Hobbies
Рет қаралды 10 М.
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН