We Bought This Cheap Airbrush So You Don't Have to

[@northprime_unlimited]

What’s up, I’ve been airbrushing for 30 years and I saw one of these and I had to pick one up. When I first tried it, it was sputtering and spitting until I found the secret. The needle and nozzle it comes with is too thin to spray with. So I got a 0.5 needle and nozzle, after that it works like butter. BIG difference. It will never replace my Iwatas or my compressor but it’s good to do quick sketches and to take on the go. Good video by the way.👍🏽

[@DeJesusCustomFootwear]

Oh nice man! That’s good to hear

[@chitowntexan]

Thanks for that tip. I didn't know what was going on with mine, but this may help 😊

[@Nobody-du8sw]

Where do you find the 0.5 at?

[@phillrob7445]

What mine did with primer & thought I needed bigger needle

[@MOBVC8420]

Thanks for your input. I will try it.

[@peterdickinson4599]

This is a cool video. I’m a miniature painter. So it is really interesting to see what other people use airbrushes for, and the tolerances they expect to be normal for airbrush usage. It would NEVER have occurred to me to try and use one of these portable brushes to paint a pair of sneakers. I mean, come on! It’s running at about 18PSI max. But for painting minis, at close to midnight, when you’re able to grab two hours of hobby time, while everyone else is asleep.... these devices are so quiet, so unobtrusive that family might believe that you’re actually doing something productive - like a bit of banking or investing. Honestly, this gear is far from perfect, but it has it’s place. It’s weak, but quiet, so you can be super sneaky and get stuff done and no-one is the wiser.

[@kareemabdul3773]

I used it for barbering

[@capcom6633]

Thanks for taking the time to do this video. It just goes to prove, cheaper is not always better. Thanks again!

[@aaliyahramos9125]

I actually bought one of these to use on my very first pair of customs I finished last week! I've never used an airbrush before yet I could tell the airflow and adjustment weren't right - but I was still able to get my gradient done decently! This video has just encouraged me to consider going for the real thing tho...

[@DeJesusCustomFootwear]

Haha if you were able to get it done with this, youre in for a treat with a real setup! Gunna love it

[@aaliyahramos9125]

@@DeJesusCustomFootwear awesome 🙏🏾 - maybe my stencil work would have been better with the real set-up!

[@griffinmusicinc]

It's probably a good thing that it's not as powerful, especially for beginners. The gentle mist forces you to take your time.

[@Jmiahonline]

@@DeJesusCustomFootwearjust bought it being cheap it’s ok shoes turned out ok but 30mins don’t like will be sending back

[@lauravosta8784]

I started with this cordless airbrush version. It was painful to work with it. The nozzle broke off (when I tried to switch it carfefully), after 5 weeks and the compressor died in week 7. It took ages to clean the airbrush. It took years to build up layers, no matter how thin the paint was. Imagine working with a clogged airbrush, because that is how it felt all the time. If you buy cheap, you will buy twice! My Harder & Steenbeck Evolution really showed me, what airbrushing should be like lol.

[@DeJesusCustomFootwear]

If you buy cheap, you will buy twice is the perfect summary for this airbrush lol

[@mungbean345]

I don't do anything with shoes, but I was gifted one of these and was trying to decide which projects to use this on. Thanks a MILLION for that comparison and showing how long it took on a shoe. I now know that I'm definitely NOT going to paint two dozen large ornaments with this thing, but it'll probably be fine for some miniature figures. I feel like you just saved me at least two days of time and headaches. Thanks! 🎉

[@derrickwagenknecht4909]

This airbrush isn't designed to cover massive areas. It is built to be an affordable option for those that airbrush fingernails, mini's, and small items. Additionally they don't have the same size needle. There is a huge difference between an airbrush with a .5 needle which the badger has, and a .3 needle. Of course there will be less volume of painted sprayed when the needle is smaller. In this case you would be getting about 1/3 the volume, which I think is reflected in your testing.

[@DeJesusCustomFootwear]

Agree on all fronts. I just think there will be a lot of temptation for shore artist starting out to get something this small

[@LiLiJughead]

I bought one of these cordless airbrushes and was underwhelmed by it. Im used to a regular badger airbrush so my first impression of the cordless one is a lack of airpower. I decided to see if it's just me or is it the product and your video convinced me it's the product. I'm going to return mine and stick with my badger.

[@DeJesusCustomFootwear]

Yup I’m there with ya, once you know what it should and can flow like it…. It’s hard to accept this big of a drop off

[@waco9208]

Thanx bro u saved alot of artists with this video may God bless you

[@rdalmasso7326]

Usual customers: "Let's try it out on paper sheets on any kind first" Dillon: " well Let's try directly on sneakers " No fear for the kind of customs ahah

[@DeJesusCustomFootwear]

lol!

[@Cutthecamerasdeadass1899]

😆😆 basically he's like "it is what it is 🤷🏻‍♂️"

[@HDStencils]

Woke up thinking on a portable compressor, I still think I like that little underpowered thing! I think it could work well connected to a micron. Great review man

[@optimafootworks9554]

something told me to go HAM on the the airbrush right from the start so i waited, saved, and apparently it paid off - my 1st airbrush was the "Iwata HP-C Plus" i love it ofc. i'll be snagging that 0.5 badger very soon tho so i can stop thinning paint.

[@lanehouston2974]

Wait you don’t have to thin paint with the badger airbrush?

[@optimafootworks9554]

@@lanehouston2974 it may depend on the paint, but with Angelus brand acrylics any 0.5 mm airbrushes won’t require thinning 🤙🏽

[@customcreationsbyjmart]

I think for new airbrush artists, it may deter them from airbrushing if thats the 1st one they use...im glad i jumped into the badger 105 right away like you suggested man. I think if i woulda got this one 1st, id probably stick to brushes tbh...as always, very helpful brother 🙏🙏

[@DeJesusCustomFootwear]

Couldnt have said it better myself and I hope thats the main message that comes across at the end of the day.

[@tyruskeeton7402]

Same here, I was a complete beginner and never touched an airbrush in my life, rarely used paint brushes. I just nose dived into customs and I have been doing great so far, Dillon's vids are super helpful!

[@indiahawkins8732]

​@@DeJesusCustomFootwearyour recommended air brush is out of stock. Is there another brand with same price point that is goos enough?

[@DeJesusCustomFootwear]

@@indiahawkins8732 here’s another website I found that has it spraygunner.com/badger-patriot-105-3in1-gravity-airbrush/?setCurrencyId=1&sku=105-3n1&gclid=CjwKCAjwzJmlBhBBEiwAEJyLu847d-Jc24ycqyp8BrjDoudx5fKhj7USky9fYtQ0dYlbe49NDKWkGhoCfDAQAvD_BwE

[@indiahawkins8732]

@@DeJesusCustomFootwear thank you 🙌🏾

[@carbonatedwatr1920]

Thank you for this bro. I was actually considering getting something like this I’m glad I went here first

[@jesuslizarraga1716]

Do you need an adapter for the badger patriot 105 to connect to the compressor?

[@DeJesusCustomFootwear]

Yes

[@ogekyumeo2396]

could i use something like this for restorations

[@DeJesusCustomFootwear]

Overall I can’t honestly recommend it

[@Mel-ky9zs]

Can you push the power button to make it go up in how fast the air comes out? My air pump has that option i pushed the power button 3 times before turning it off.

[@DeJesusCustomFootwear]

Not on this one unfortunately

[@voin3858]

Interesting video..thks. You can see the difference in the two guns spray pattern...maybe the cheap one has a number two needle .very small. where your pro one has a 3 0r 5 needle. something you didn't mention at all. can you even change the needle in the cheap gun ?

[@infamusflinch7596]

How did you fade the black into the darker blue? Did you get a darker blue paint or did you mix the two colors in some way? Sorry I’m new to this

[@infamusflinch7596]

Also what should I do to really get started? I bought a AF1 but I’m afraid to start it. Should I practice on paper or knock of AF1’s until I get a nice idea of the airbrush I’m using.

[@DeJesusCustomFootwear]

You can definitely get started practicing on paper, cardboard, anything like that just get a feel for your airbrush. What we use to make the smooth gradient is called the middle bar technique where you take an even mixture of both of your colors and spray that where they meet.. In a way its like creating a 3rd color and adding that in, but what you do after is take both of the original colors and blend those back on top of the new middle bar color you created. We give a breakdown in this video here (kzbin.info/www/bejne/iXzYk5ubfdd5a80)

[@coachtheh.n.i.c2227]

Im ab beginner with airbrushing and I have that exact same one I really don't have very many complaints except for the battery life. I personally feel that the battery doesn't last long enough when you're in the middle of a project you have to wait for it to fully charge in order to complete. Just off of doing one pair of Retro 13s it took me two days to finish both boat shoes

[@DeJesusCustomFootwear]

Haha yes that would definitely interfere over time especially if you're on a deadline. It also starts to become quite heavy after holding for an extended period, just the ergonomics of it.

[@coachtheh.n.i.c2227]

Your exactly right on that. But hey man, I want to thank you for the making and uploading these videos, I've spent hours watching you create these masterpieces day in and out. It's almost in comparents to sitting in front of the TV as a teenager watching every episode of Dragon Ball Z lol I don't miss a video. You do amazing work boss.

[@DeJesusCustomFootwear]

@@coachtheh.n.i.c2227 thank you man, really appreciate your kind words and you tuning in!

[@kidsmac43]

This really helped thanks! But can you use it while it is charging?

[@JnJShiffler]

Just got one off ebay for $17. Trying to spray thinned resolene. hard to tell how much is coming out with that sealant.

[@EnriqueGuerreroO]

Can i use it as a fine soda blaster?

[@chrisphilip]

Actually I'll try this portable air brush until I get electricity where I lives, that will work until I can step up my game, you understand, but I'll also try and get better soon as possible... You're the best 👍👍👍👍👍👍👍💯💯💯💯💯💯💯💯💯💯...

[@ashleyholloman5373]

Where to get new nozzles and caps.

[@DeJesusCustomFootwear]

Not sure on that one unfortunately

[@si12volt1]

wonder if you can use your own airbrushes with the correct adaptor to the aircan

[@DeJesusCustomFootwear]

Yes I belive so

[@sericono9077]

Great review, thanks for sharing it. I love my Iwata working at 22 PSI though!

[@patrickwillis13]

Hey dejesus I asked you about a week ago if you would consider using solarcolor dust. You said you just need to find the right project. What about color changing floral? That's a project I'm gonna try to do I'd love to see your take on that.

[@DeJesusCustomFootwear]

Yes thatd be doope!

[@mannyxv2665]

Hey I just got the badger 105 and I have a air compressor that like hold 125 psi it will work the same as long as I adjust the psi

[@DeJesusCustomFootwear]

Yes it will

[@mannyxv2665]

@@DeJesusCustomFootwear thanks your the best

[@rfabian10]

5:50 HUGE difference, definitely not getting a cordless airbrush lol - great review!

[@DeJesusCustomFootwear]

Thanks for watching! That comparison was a pretty late addition but I think its really helps show that difference.

[@chosen1mma784]

Is the Master Airbrush Cool Runner ll any good for painting shoes?

[@Muurphius]

I bought that airbrush to start. It worked for a few shoes but I had to retire it quickly

[@travis8573]

Hi. What paint should you use when making use of a airbrush?

[@DeJesusCustomFootwear]

Really depends what you’re painting. If you’re reffering to what I use on shoes, that would be Angelus paints!

[@juniorortiz3371]

Do you think the air brush that the harbor freight compresser kit comes with would be a good air brush to start off with?

[@DeJesusCustomFootwear]

Oh no it’s super cheaply made

[@juniorortiz3371]

@@DeJesusCustomFootwear damn man I was looking into the harbor freight compressor by its self but its not available to ship only the kit is and I don't think its worth paying almost a extra $50 for the air brush if its cheap

[@DeJesusCustomFootwear]

@@juniorortiz3371 here’s an Amazon comparable one TIMBERTECH Upgraded Airbrush Compressor with Motor Cool-Down Fan ABPST07, Powerful 1/6hp Portable Quiet Airbrush Compressor for Airbrush Paint, Nails, www.amazon.com/dp/B07VQ7MFVQ/ref=cm_sw_r_cp_apip_4CXKWhqH4HRFz

[@juniorortiz3371]

@@DeJesusCustomFootwear OK thank you, will look into it

[@sonderstudios6675]

Have you tried changing the nozzle sizes? Maybe some basic troubleshooting will help a bit

[@SPONGEY7244]

Would this be good to buy as a portable airbrush when you’re working in an outdoor space?

[@DeJesusCustomFootwear]

I just don’t think it’s powerful enough to actually have a good time using!

[@gulick2461]

How do you thin out the paint

[@DeJesusCustomFootwear]

Angelus makes a product called 2thin

[@lionelba7046]

would this be good for small projects on sneakers like minor colour panel changes?

[@DeJesusCustomFootwear]

I still just think it doesn’t have enough power overall especially considering it’s not a tenth of the price of a good setup

[@bipindubey8793]

How bought and price

[@exotictrash2234]

Got this as a gift recently from my girlfriend. First time using an airbrush and have gotten some Mr.hobby metallics to spray, but can't get anything else to spray no matter how much thinner I add. I am spraying using acrylics and have tried several paints from Mr.Hobby Aqueous, Tamiya metallics, and citadel base colors. The airbrush sprays thinner and water just fine, as well as airbrush cleaner. But I am wondering how I can get some colors to spray. If anyone has any tips please let me know.

[@friktionrc]

Just an idea, but if it sprays water and thinner fine, have you tried making the paint mix as equally thin …or as close to the viscosity as water/thinner? Then when spraying maybe heat up the surface with a blow dryer or something and then paint the layers on in thin mist layers?

[@bruceweir2810]

Hi DeJesus, I'm hoping to airbrush my Padel Tennis racket, which Portable Airbrush Spray USB Compressor do you recommend? Also, do you have a preferred paint? Thanks

[@DeJesusCustomFootwear]

I don’t recommend any of the portable airbrushes unfortuantely. If you watch this video when I compare it to the badger patriot 105, there’s not much comparison. I would use angelus paints

[@buildaempiretv8946]

Thank you for doing this. This is exactly what I was looking for

[@DeJesusCustomFootwear]

🤙🏽

[@BrokePhiBroke]

I bought one of these before and its on the shelf exactly like you said 😂

[@LKSWEETHEART]

Where can I get it

[@kennedysamarakody4925]

How you manage clogs in that?

[@DeJesusCustomFootwear]

Would not be fun figuring it out lol. I haven’t used it at all since the comparison

[@theosisza]

Good Video! How do you clean the Cordless Airbrush?

[@DeJesusCustomFootwear]

Thanks! I just cleaned it the same way I did a standard one. Ran cleaner through it, spray excess in a cleaning pot, leave cleaner between sessions

[@Gollammeister]

So they no good then basically? For say acrylic primer spraying

[@jairocuriele5864]

How about the WORX MakerX 20v airbrush?🤔🤔🤔

[@lrac_1]

Wow haven’t been here in a minute but I know I’m getting the best review for sneakers customizations

[@dagoat009]

Bro your vids and your replies has help me a lot 👌🏽 I appreciate every moment you upload a vid 🙏🏼 I have a question are posca pens good to use?

[@DeJesusCustomFootwear]

Thanks bud, I dont recommend them for anything truthfully. But if there ever was a time it would be for tiny small details like outlines or something similar

[@dagoat009]

@@DeJesusCustomFootwear thank you so much for the reply 🙏🏼

[@emsanchez85]

Crazy, I was just looking for a video like this yesterday lol

[@DeJesusCustomFootwear]

Haha great timing! Thanks for watching.

[@lorenzogovender2309]

Hi im new to customize and would like to know what are the different types of paint that can be used to customize shoes other than angelus

[@MarleyMarBih]

It’s crazy I’m going through an airbrush situation currently and your video popped up. I almost purchased this one lol I’m a beginner starting on a budget. Thank you for your videos! Also, where can I purchase bulks of Laces in variety colors

[@DeJesusCustomFootwear]

Check our @goglace and @lacelab!

[@MarleyMarBih]

@@DeJesusCustomFootwear you are awesome! I’m literally starting my shoe biz off your videos. Do you think FIT Sneaker Essentials online program is something that could help a starter like myself? If you ever offered something like that, that would be dope! Thanks for all you do, it’s appreciated and very helpful.

[@DeJesusCustomFootwear]

@@MarleyMarBih I’ve heard good things about it!

[@joseconstante1321]

Did u get a good airbrush I am also starting customs

[@donotcall1215]

could you use an oil based polyurethane with this product?

[@DeJesusCustomFootwear]

I think it lacks the power ..

[@rjmoney5430]

What’s that product called that you put inside the before the paint?

[@DeJesusCustomFootwear]

The 2thin?

[@ramonrenier708]

I like my Sil-air compresor and Harder & Steenbeck Evo❤

[@shawnbodendorfer1867]

I bought the worx and hooked to small compressor can't get everything dialed in

[@billmunroe889]

Was that cordless a Kibee?

[@MOBVC8420]

I can agree that it lacks airflow. It does work well for cake decorating and nails. It is a pain to clean.

[@mamamuminka12345]

Hey bro! I need your opinion. Does a compressor without an air canister have constant pressure and air flow? Supposedly, the container provides this. I'm going to buy my first compressor (I already have an FA-186AK airbrush), and I'm not sure if I need a canister for compressed air.

[@DeJesusCustomFootwear]

I gotta be honest I don’t know man. Go with the harbor freight airbrush compressor and you’ll never have any issues lol

[@williamward9755]

Do you know if you can connect the $50 model to a compressor?

[@DeJesusCustomFootwear]

Potentially if you were able to find the right attachments.. at that point though it’s absolutely worth to just upgrade to the badger though

[@domydestruction]

I just started customizing shoes and a bought an airbrush and after the first use when i pull the trigger just for air it comes paint out too what should i do to fix it?

[@DeJesusCustomFootwear]

Sounds like your needle isnt pushed all the way forward and locked in.

[@domydestruction]

@@DeJesusCustomFootwear thank you i will check it out

[@brucegibbins3792]

As an Airbrush newb, the self contained airbrush system you've being demonstrating has me now wondering if setting aside rattle cans that have served me well over the years in painting models in favour of this type of thing that requires a fair bit of learning to master has been such a crash hot idea. I'll see how it goes, but I've a feeling that if current practice is serving you well, why change for a journey into the unknown? The immediate advantage to me is that using an airbrush allows for almost endless colour variations. No bad thing as it happens but, necessary, or ideal, even, who knows? The attraction here of course was the self contained powering of the airbrush and so avoiding the purchasing of an air compressor. The airbrush and its can of electrical energy will arrive here sometime next week, I bought local rather than from overseas. This allows for less troubles if something goes wrong and the tool needs to be returned for repair or replacement. I'm not so sure that this self contained airbrush is actually not much more than a gimmick, but time will tell. Model building teaches patience, so this may need to be drawn upon before two moons have come and gone.

[@richsmith7200]

Old post, but what kind of models do you build? I do mostly military, but have had a hankering to build some cars and trucks, maybe vehicles I've actually owned, plus some fantasy vehicles (Ferrari, Lotus, etc). I've owned 4x4's, a '68 El Camino, SPL311, MG's, etc. I think I'll get one of these for interiors, cockpits, etc. The spray cans obviously don't allow good control of the paint application, especially thickness which can kill details, like panel lines, door jams, and such.

[@pumpkinspicelatte1731]

Ok well here's a question, I don't want to customize my nikes n jordans, but I'd like to be able to tape them off and repaint the white plastic mesh on the white tech 4s, everything's pristine white except some of the netting and I can't do that. So would this be sufficient for simple stuff as such. Get at me. Personally I was looking at the airbrush from, No Name brand. actually what it's called, seems to have decent reviews

[@aphilly2158]

Can you change the top part to a better one think that will improve it

[@dispersemedia]

Planning to get this for minor paint chip repairs on guitars. Would anyone recommend it?

[@6the_one791]

Can anyone help with a recommendation? I want to get a airbrush setup but no clue where to start..

[@DeJesusCustomFootwear]

I’d go with the badger patriot 105!

[@6the_one791]

@@DeJesusCustomFootwear thank you so much for taking the time to help me out your the goat....

[@jasonschlencker8108]

It is good for doing stencil art and temp tattoos too.

[@chickenkiller_dk8339]

Hey Dcf you should try and take that Compressor of and try to use a normal compressor just to see how that performance

[@DeJesusCustomFootwear]

That would make for a great comparison! It seems like I would need some type of unique adapter but I may look into that more

[@TRESORRUSSELL]

Thank you Jesus please bless and protect this man

[@peterdickinson4599]

Bit much. If you love him so much just marry him.

[@Djungelskog69420]

@@peterdickinson4599 chill bro 😅

[@jacklangley861]

I bought one of these and i love it!

[@Jgentry818]

Just ordered an airbrush last night cat wait to get started good review keep it up

[@DeJesusCustomFootwear]

Awesome! Thank you!

[@Jgentry818]

@@DeJesusCustomFootwear You’re welcome thanks for all the tips

[@lanehouston2974]

Dude I love these videos! I have been wanting to ask for a while now, do you order shoes as orders come in or do you order a bulk amount of shoes and push them out? Thanks so much for all the guidance!

[@DeJesusCustomFootwear]

I order as they come in, theres too many sizes to keep in stock usually.

[@firemyst9064]

Yeah these videos are the best! Testing multiple items is time consuming and not everyone wants to go through the hassle.

[@KickzzrusKustoms]

You should do cheapest vs expensive airbrush. I use a $15 airbrush and it’s kinda more maintenance to keep clean and unclogged but other then that it works really well for me

[@DeJesusCustomFootwear]

Yes I think that would make for a great comparison video. Which one are you using?

[@KickzzrusKustoms]

@@DeJesusCustomFootwear “Dual Action Gravity Feed 0.3mm Gun Spray Airbrush Nail Art Paint Tattoo Tool Set” I get them from eBay

[@DeJesusCustomFootwear]

@@KickzzrusKustoms what compressor do you use?

[@KickzzrusKustoms]

@@DeJesusCustomFootwear Airbrush Depot TC-20. I got it about 3-4 years ago

[@DeJesusCustomFootwear]

@@KickzzrusKustoms nice dude! I think a $15/20 airbrush vs maybe 200/300 would be a super cool video ! Thanks for the suggestion

[@bandit2896]

Any air brush recommendation for beginners?

[@DeJesusCustomFootwear]

Badger patriot 105, we show it off in the video!

[@bandit2896]

Oh man don't know how I missed that🤦‍♀️, thank you

[@manansharma1501]

great work dillon............

[@warcannibalmullens1388]

What does it say the PSI is on these guns? And can it be adjusted?

[@DeJesusCustomFootwear]

Theres a screw on the back that says will adjust the psi, but based off my test there was little no difference with the tightest and loosest settings

[@RiceEyes420]

What about painting very small things like Hotwheels?

[@DeJesusCustomFootwear]

I would say depends what type of paints you’re using, if they’re super thing maybe.. but overall there’s a still a lack of pressure issue

[@jamiedones3266]

Thank you for sharing this

[@Casey-os8fm]

That's for light makeup or cake decorating

[@randm7216]

i like the toothpick at the end

[@exgangster843]

Well... If its a shoe... Then u need more powerful spray..... That cordless spray migh suitable for Warhammer thingy....

[@HessandLawson]

Great video my man! 🔥

[@DeJesusCustomFootwear]

🙌🏽

[@tyruskeeton7402]

Hey DeJesus, I have been doing customs for a little over a week now and my customs are coming out great! one problem I have though, is that when I put my Satin Acrylic Finisher on it seems to make my paint that I am applying the finisher to start to come of and kind of leak off onto my white areas, and I don't apply the finisher with a brush, I use the air brush for everything. Tell me what I'm doing wrong! Please help!

[@DeJesusCustomFootwear]

Very odd, is the paint Forsure dry before applying the finisher? Otherwise it just sorta sounds like the paint might not be bonding properly so it could need some more prep work

[@joseconstante1321]

So I am customizing shoes and when I paint the bottom and put a sealer I don't remember what brand it comes can you tell me the steps to painting shoe and for the paint not to chip

[@davidmoran6115]

I'm wondering why that the one that I got that's something like that and why does it spray by itself

[@DeJesusCustomFootwear]

Maybe the needle isn’t locked all the way forward?

[@davidmoran6115]

Ok

[@E_y_a_l]

One of the reviews on Temu said it happens because the airflow control button was assembled in the wrong direction, I hope you understand what I mean, try to disassemble the airbrush itself and turn the trigger 180 degrees and see if it fixed your problem.

[@davidmoran6115]

@@E_y_a_l ok but I found out I had to push the needle almost all of the way in so now it doesn't spray by itself anymore

[@justusbuckingham1000]

great stuff man! I was about buying this, but glad i didn't

[@DeJesusCustomFootwear]

Glad I could help!

[@NalaNdu83]

Please tell me you saved this pair afterward.. 🤞😅

[@DeJesusCustomFootwear]

Haha I did!

[@doubletakecustom999]

Can someone enlighten me, if i want to get this "Iwata-Medea Eclipse HP CS Dual Action Airbrush Gun / Gravity Feed" from Amazon, does it come w a compressor? or is it separate. In that case its so expensive 😩

[@DeJesusCustomFootwear]

Send me the link, but I’m guessing that’s just an airbrush no compressor

[@doubletakecustom999]

@@DeJesusCustomFootwear Hi! Thank you so much for wanting to help😊 Yep i found out its juz the airbrush itself

[@jacobcruz2961]

the shirt he is wearing at the beginning of the video would make a clean custom also is it worth paying the 300$ on angelus

[@DeJesusCustomFootwear]

It would! Make sure you use our discount code to help you save a bit (dejesus321) but sounds like you bout to go crazy!

[@biglee2575]

Thank u for Dat information💯💪🏼

[@DeJesusCustomFootwear]

Thanks for watching !

[@Emtbtoday]

Because the rear screw is for liking the trigger to how far you want it to pull back to! Best to just keep it out our more expensive ones are push and release locks in the screw for modeller's this thing just no! It's hard enough using mine with a tiny secondary water trap attached direct to the airbrush! The single compressors you get are better for starting up with but it will stop working within a year to 2 years all 3 of mine did I ended up paying out for a big double tanked 620H sparmax compressor never had an issue and don't get a single bit of water through the airbrush like the single small compressors with the heat ut produces and condensation builds up in the piston as no airtank for it to escape to!

[@dominickalves7865]

Do you ask for a payment upfront before you even start painting the shoes ?

[@DeJesusCustomFootwear]

Yes I do!

[@giuliogia6804]

How is named?

[@DeJesusCustomFootwear]

Linked in description.

[@swivells6115]

keep the amazing content up

[@DeJesusCustomFootwear]

Thanks for watching!

[@artmanstudios7037]

This item does seem like it has potential but I guess the technology just isn't quite there yet I mean it is convenient to be able to have one of these on your travels instead of having these huge compressors to take everywhere you go but until they can rival the compressors then they need to get back on the drawing board and figure that part out otherwise I don't see any use for it at this point at least for this brand that you bought maybe the quality ones might have actually giving you the same or a rivals that of a compressor.

[@DeJesusCustomFootwear]

Agree! If it this worked as well as intended it would be great for travel!

[@pwebb1975]

I was going to cop one of these too

[@TobyDeGard]

Thanks for posting. Maybe someday they will build a good one.

[@awesomejmd1183]

you always got what I need to know👏

[@bigboycustoms9515]

i actually almost bought a cordless airbrush when i wanted to start airbrushing thank god i didn't!!

[@DeJesusCustomFootwear]

Yes I think youll have a better experience long term starting off with something better.

[@molenat9973]

I have this same one but a different “brand”. I’m a first time air brusher but the compressor in this kit already seems to not be running at full capacity. The first two times I used it, it was fine. Last night, I made sure it had a full charge and put some water to make sure it would function. It did. I put some primer in (for miniatures) and thinned it with some water. Seemed decent and it was more the first two times I used the brush. I did quick trigger pulls, about 1-2 seconds each. I don’t even get done with the first model, the paints not coming out very well and the compressor is not as loud or vibrating as hard in my hand. The kit only came with a .3 mm needle/cone/tip so I had to make do. I’m looking at getting a different slightly more expensive one with a compressor with wall socket cable. Hopefully the airbrush is somewhat decent. Does have multiple needles as well. I WOULD NOT recommend this airbrush kit

[@rdalmasso7326]

For my personal this seems interesting for 2 mains reasons above the price, first I do not have space for a proper airbrushing set up, living in a 40sqm with my gf, and second It seems to be very useful for covering mesh fabric especially, even if the air flow is not that big it would be good enough to get a better finish than using paint brush ?!

[@DeJesusCustomFootwear]

Yeah any airbrush application will beat paintbrush when it comes to fabrics so you can avoid those clumps and filling in the holes

[@rdalmasso7326]

@@DeJesusCustomFootwear a little question Dillon, I've seen some airbrushes with mini compressors, with 25psi for the compressor and a 0.5mm nozzle for the airbrush, the one you review has a 3mm nozzle which brings to maybe too diluted paint to avoid clogging, do you think it would change something 0.5mm nozzle? I've read that 0.5 is more recommended for acrylic paint