PORTED PRO MACS , UP AGAINST STOCK 10 10

[@erichusqvansonswanson7955]

Was cruising down the road today listening to you and your mums song "mercy river". My definite fave of all your family's tunes. Which says a lot cause they all are great. Hope all is well to the north and welcome new folks. You are witnessing history unfold before your eyes. Love-kindness-full circle

[@BuckinBillyRaySmith]

THANKS FRIEND

[@Hcracing242]

a good video buckin,sound real good this saws,love'em.thx to ron for letting the buckin army come out here.i have the same deal over here,clear the trees and get the firewood.good deal,nice to trade like this i think.big welcome to all new subs,big hello to all of buckin army.stay safe,be kind,love to all

[@chrisiverach1091]

It's my pleasure every time I can watch, so thank you. From going from scared of chainsaws to not getting enough practice, this channel draws me in. I can't wait to get a bigger saw. :)

[@kingkrabz8805]

nothing like the sounds of a good ol 10 10

[@stevefrentzen5762]

Fantastic Buckin' and just look at the chips flying in the perfect blue sky! Love seeing Mac Mac Macs buzzing and running thru the wood. Cutting for the love of it. Like the best of engines its great fun to test em and hear em go. Keep it live and spread the kindness and let it grow. It makes a difference. I do it for someone else, anyone sometimes so fun to pass kindness to one like a feeling of sitting in the sun. Love it. Peace to all

[@BuckinBillyRaySmith]

GREAT STUFF BROTHER

[@mrbill9454]

I've gotta find a 10-10! I love playin around with old saws like that...2 stroke engines in general...there's just something special about old MAC's.

[@shanebarnett3094]

Hi Buckin’ love those ported macs!. I must get to one of mine and experiment one day. Have a great week all.

[@petersteiner872]

Sometimes I wonder that so much new knowledge still fits into my brain. Thanks to you Buckin!

[@loadeddog8015]

❤️from. 🇦🇺........to ......🇩🇪.......😎👍🇦🇺

[@BuckinBillyRaySmith]

PETER OL BOY ..LOVE YA

[@petersteiner872]

Buckin' Billy Ray Smith: Not to talk about giving some different views on life. 🙏

[@benjaminrobb5949]

I’ve got a 10-10 auto and a pro Mac 10-10 and I love them both . They are both quite loud

[@tbas1972]

That small gasket is like a restrictor plate doesn't allow it to flow like it should it's probably for home owner use is my take on it, now the big gasket is for the pros so it can run at full beans, just my thought.

[@BuckinBillyRaySmith]

YES SIR

[@woodchuckman2753]

Ported saws put a smile on my face to

[@staceymelville3062]

800 has my vote also .Buckin and hotsaws 101 collaboration would be quite progressive learning .the feeling of running those old saws really nurtures your spirit I can see that %100 thanks .

[@michaelwhiteoldtimer7648]

dr. bellhopper the mad mac man, thanks for helping with these saws, Buckin is on top of the world

[@tatechittim7322]

I use pro macs only to fell. I ported and polished and they are crazy!

[@Neighborhoodgo2guy]

Yes another beautiful day with some big power saw cutting!

[@BuckinBillyRaySmith]

BROTHE R

[@gregkahle9046]

Great video/info/test! Nice job JB aka The Bell Hopper! Thumbs up!!!

[@alantippett7602]

Amazing how those 10 10s run with that size engine, keep on "Rattling up that old logging road!" Hope everyone is going to have a great week! 👍

[@barryreynolds3801]

The bellhopper is the Man!! Ported Macs!!!!

[@BuckinBillyRaySmith]

IN MY MIND HE IS A TREASURE ,, NOT ALOT OF FELLAS WILL BREAK THESE DOWN HE IS MY FRIEND HE HE

[@barryreynolds3801]

@@BuckinBillyRaySmith I talked to bellhopper to. Him and my friend Andrew are good buddies . Buckin Army is growing everyday!! I talk to Nick the dumpster as well well!!

[@Woodman_Custom_Sawing]

@@barryreynolds3801 does he have a channel or is he on any chainsaw forums online? Is the Andrew you are talking about AJ's Chainsaws?

[@TheJonsberg]

Once you have run a ported saw it's hard to go back running a factory one for sure 😀 Great video brother ❤️

[@Andyshine77]

Couldn't agree more my friend.✌

[@BuckinBillyRaySmith]

BIN SPOILED FOR MANY YEARS... LOVE YOU JONSBERG

[@TheJonsberg]

@@BuckinBillyRaySmith Love you too

[@tjlqk3]

TheJønsberg totally agree. I have a ported Stihl 028 super. That things sings.

[@577buttfan]

All my saws get the exhaust port and retune job,first thing in the trash is the spark arrestor..

[@HomesteadJay]

Buckin, another great video! Ive been watching for a years now. I have a McCulloch Eagar Beaver 2.1 top handle. She cuts for a little beaver for sure! She cuts EH? isnt that the way the saying goes! Also you cant search McCulloch on youtube without finding good old fashion Buckin Billy Ray! Ever since then ive been a subscriber and a watcher! God bless, stay safe, and keep em coming!

[@BuckinBillyRaySmith]

DONE

[@stevetheriault4164]

You should have a vintage saw class show at buckin stock all old pioneers and homelites and mcculugh

[@pm270100]

ya old hot rods luv it

[@wheelchairhillbilly]

would love that

[@bykrmom]

You are proof that Canadian heath care is amazing. I sustained a minor back injury compared to yours, and the V.A. health care hasn't figured out how to fix me in 20 years. Yesterday I ran my Poulan 5020 for 20 minutes bent over a bit and I was completely done. And I'm paying for it today. I have to figure out how to put a 28" bar on my Poulan. It will never be a Mac, but she cuts, eh? hehehe

[@dansherrell6803]

Angie K you’re a beast!

[@bykrmom]

@@dansherrell6803 I should have dragged those logs up onto something instead of bending over, but there was so little I thought I'd be OK. Lesson learned lol

[@jolkraeremeark6949]

Have you tried the exercise ball routine, Angie K, that Buckin' uses?

[@bykrmom]

@@jolkraeremeark6949 I do those exercises on the floor, but I can't balance on the ball. I did try :)

[@BuckinBillyRaySmith]

BRING IT TO BUCKINSTOCK

[@jeffreyrubish347]

I'm thinking it could be differences in the piston top and/or port size.

[@loadeddog8015]

Ported , not ported, any of em would be a welcomed addition to my arsenal..... have a fantastic week y’all. Welcome to the new subscribers... love❤️ n hugs 🐨for our cynth and mama buckin....😎👍🇦🇺

[@kevinduff3797]

Good Morning Loaded dog!! 😎👍🌳🌳🌲🌲

[@loadeddog8015]

Mornin’ Duffy.... hope ya had a terrific weekend mate.... have an equally good week 😎👍🇦🇺

[@markrgc5377]

Excellent video and excellent saws love it thank u buckin

[@geekay4703]

can't stay. work calling. Wanted to pop in and say hi and give a thumbs up.

[@jonnymoore5342]

Nice job buckin 👍 and thanks to Ron ✊ great watching 👌

[@jamesdale1126]

keeping it kind Buckin', you guys are doing a great job..

[@BuckinBillyRaySmith]

THX JAMES

[@The_Yukon_Cornelius]

I'd like to see you race the dolmar 7300 you got against that walkerized 372 with the square ground chains

[@erichusqvansonswanson7955]

I second this!!!

[@BuckinBillyRaySmith]

LETS DO IT

[@ElectricPhantasmagoria]

Hey Buckn, loving the channel! Merry Christmas! So around 2:00 a few of the reasons why the pro mac would cut better than the others you pointed out would be the metal air cover box. The stock air cover case has less air vents. They have 2 on either side of the central rear support. The pro mac has 4 on either side. Also I bet they stock ones all had that restricted intake gasket. I’ll even bet the intake and exhaust ports could be slightly undersized on the stock cylinders. I wish you a nice one to you, all your family and friends!

[@t.texasty]

10-10's are sure nifty little saws, impressive that they can pull a 28'' like that. Big douglas fir is not easy to cut, especially if it's dry. Lumber cut from doug fir can get so hard you have to pre-drill it to drive a nail though it, pretty similar to the hemlock we have up here. Hard on saw chains and sawmill blades.

[@BuckinBillyRaySmith]

YOU SPEAK TRUTH

[@Keenedgesurvival]

I heard they run cheetah blood through the pro macs before they leave the factory lol

[@BuckinBillyRaySmith]

YES,, TRUE DAT , AND IN THE MID 70s THEY ADDED A SPRIG OF CROCODILE BLOOD

[@nathanbrodeur]

Buckin I watched a video from CotonTop3 of the new Husqvarna saws that were released and Husqvarna said exactly what you found out on the McCullough saws that one spacer plate model of saw same cc is for landscapers and arborists with a bit lower of rpm and the other spacer plate is for Logging production falling with a higher rpm I hope this helps you understand a bit better

[@BuckinBillyRaySmith]

YOU BET CHEERS

[@bennystihl574]

Most of the 10-10 i find here in Vermont USA. have 16" bar and chains. and they CUT! Keep up the work!

[@ryanssawmill8224]

Love it 😍 Buckin she cuts like a banshee the Macs are heavy but ya know I might buy one I had one when I was 12 years old as a kid boy they were heavy lol

[@BuckinBillyRaySmith]

THEY ARE LOVELY

[@WoolysWorld]

So you run a 28 in bar on all your saws?? Even your huskys? My new saw , it's s 71cc , the 365 it should run a 28 then?

[@dansherrell6803]

Wooly's World I have an 044 Stihl and it’s a 72cc machine, I believe the longest bar recommended by the manufacturer is a 32”. Your Husqy should be fine.

[@dansherrell6803]

I just checked and actually I was wrong, 36” is the max recommended length but that is probably really pushing it.

[@WoolysWorld]

@@dansherrell6803 thanks for the info

[@WoolysWorld]

@@AndyL940 thanks , I normally run a 20 inch barrel on them , but I have few big boys coming up.

[@boooshes]

You have to try to know. I run a 36 on an ms362 and I can mill with the nose buried. But the way the chain is set up makes a huge difference. Raker height, sharpness, etc. I can cross cut all day with that big bar, but if I go back to a 24 or 20, I can run a hungrier chain and cut faster. Do you want a lighter weight set up or to bend over less, or cut 30" logs from one side only? Lots of choices.

[@boomer_bob6493]

I think once I get a few bills sorted I might start putting away the money I used to spend on smokes so I can make the trip from Australia to Buckin Stock one year.

[@BuckinBillyRaySmith]

WELCOME WITH OPEN ARMS

[@rogercoder1469]

If you think you went a little to far on on that saw, sometimes you can get a little back with the hole size in the gasket. Love over powered though!

[@andrewjames165]

Love that vid of the tree falling 4 feet from the house. HEY BUCKIN

[@waynetharp]

What's the big hurry? I really enjoy my time in the woods cutting. Modified saw will just get me back to house sooner...😥

[@JCrook1028]

Think Corvette vs honda accord..... one is more fun. :)

[@mikeyyoyo6464]

Well there's two ways of looking at that haha! Chin up guys 💪❤️👍

[@waynetharp]

@@mikeyyoyo6464 It is all good! To each their own.😀 Take care and be safe!

[@bogg54]

Hey Buckin', I've noticed that too. Three of my 10 10 right hand pull had the same "big air intake spacer". Thanks Buckin'!

[@chriscummins4282]

Good wrap up there Buckin' . I love that post-fall laugh btw , sort of stumbling around swinging the saw type laugh ( holla)...saw it on your multi- fall using ladders vid.......A scientist and an artist and a cutter you certainly are : )

[@kevinc.8869]

I own a couple pro macs. My friends laugh at my ugly square saws but then they smile when they try them out and see how great they are. I am now hooked on Macs. Getting parts for them has been a bit of a challenge though.

[@karlelliott9254]

I love the old red metal 2 1/2 gallon gas can. I bought one in 1972 with my new 16 inch Skill Saw gas chain saw. It was a close out for $150 brand new. All metal saw as I remember and metal rear low tank and used to cut firewood for four or five households for 23 years. Then it got to where you could not get ignition points and I wish I still had it.

[@keithrayeski3147]

my Dad ran a Mac 800 for years and years...an out of the box stock saw that he maintained himself..only buying chains and a trust a bar or two over the years. He has a few others but his Mac was his go to saw. I wish I knew where that beautiful yellow girl got off too...maybe she's up cuttin cords in heaven with Dad....miss them both....but I may grab up a couple ole Macs for fun and nostalgia....take one any day over a Husky or Stihl...hack, I'll take a Poulan Pro over those other two!! ;>) Lovin cuttin with ya Billy!! Keep havin fun and we'll keep watchin!!

[@pm270100]

BELL good work well done you can hear the diff an see it

[@elizabethtaylor9321]

Your right there Buckin about old saws, been cutting up big old dry ash with my old Stihl 048 , love that old saw. Saws are going the same way as vehicles nowadays , to much electronics , better with old style mechanics . Take care be safe be kind. Charlie.

[@amd65ak47]

I really could use a side clutch cover from the Mac 1010 I have one that runs awesome. it was my mom's dad's saw. Run like a roadrunner.. he ported it along time ago and when he passed away 13 years ago. Ma 64 now.. but that a side.. the side is missing clutch cover is gone.. I would like to put it back in use but I cannot find a side cover for it cuz there are non-existent everybody grabs them up. Before I get a chance to get one .. got a spare one.

[@HomesteadJay]

Buckin, another quick thing...I worked a pile similar to this last spring that was cut and stacked with a fella buncher and I cut for firewood and what i did with my chevy was back right up to the pile with the tailgate literally touching and I worked top down and when I cut they just rolled right into the bed. We all could use a little break from picking up large rounds...Am I right? Just give it a shot next time. You cant do it for the whole pile but hey less stuff you gotta man handle the better! Just trying to help ya out!

[@BuckinBillyRaySmith]

GOOD STUFF BROTHER THX

[@spencermcginty9812]

You’re not going to know what to do when that pile of fir is all bucked up😂 those are some fine running saws my friend. Love to you and the family❤️

[@BuckinBillyRaySmith]

HE HE

[@Alpha1545]

Buckin I know you know what your doing. But I still love the 880. Be safe and thank you for what you do.

[@BuckinBillyRaySmith]

nO, NO! YOU MUST NOT LIKE YOUR 880 ANY MORE THEY ARE GARBAGE YOU MUST ONLY LIKE McCULLOCH ..LO HAHAHAHAHA LOVE YA BUDDY , THX FOR HANGIN AROUND BROTHER

[@terryw.milburn8565]

Tuned Tickled & Dust Flyi'n Everywhere . Great Show Love To All From Down East ! ATB T God Bless

[@stevetheriault4164]

It would allow more air so you can richen your fuel needle more fuel more power low end torque looks like a beutiful day in your neck of the woods

[@essinem4130]

I have an older Pro Mac 650 that I've been working on getting running right. Have a model that came with a 28.something inch bar for the factory. Currently has oiling issues and needs a new recoil starter assembly but the motor is in great condition and seems to run strong. Wondering if you have any experience with that particular saw. Is it worth getting the Mac 650 ported? I have a 372xp thats my go-to, but theres something about the Mac, I just like it and if it ran reliably I think I'd favor it over the 372. Its a torquey SOB and seems to pull better when I'm ripping large diameter logs than the 372.

[@BuckinBillyRaySmith]

FUN TO RUN NO DOUBT

[@munched55]

Maybe the diff is down to the carb used. The 10-10 used Tillotson HS and the Pro Mac 10-10 uses Walbro SDC.

[@Gordon_L]

On some of the old 1970's / 80's Johnson - Evinrude outboards the only difference between the 9.9hp and the 15hp was a different carby .

[@munched55]

@@Gordon_L We have had a Johnson Seahorse 10hp in the family for over 50 years now. Still runs like a top. :)

[@han050]

Whay not take of the cylinder on both of them and look on the inside ? To see if there is a obvius different between them.

[@BuckinBillyRaySmith]

WERE ON IT

[@mbmcclure3579]

Great video! Gotta get my pro Mac 10-10 on the list for this!

[@mikedionne8187]

By far my favorite Buckin' vid! I'm a bit of a motorhead and wanna figure out how to get the most from my Macs too. Strange thing is I have an old black top 10-10 auto and it'll actually outrun a pro Mac 10-10 that I had. Dunno what's up with it but it's such a strong runner. Of course I have a 57cc 10-10s that outruns all of my 10-10 saws. I bought the 10-10 auto off an old duff that bought it new. Only thing he told me was he did seize it and had it rebuilt at some point and he thought the shop modded it in some way, but he couldn't remember what they did.

[@BuckinBillyRaySmith]

HOLD ON TIGHT

[@mikedionne8187]

@@BuckinBillyRaySmith Haha, sure do, and with a 18" Oregon bar it really flies. My go to saw for playing in the wood pile.

[@barrybri]

A compression gauge and a tachometer would be useful tools for comparing and tuning the saws. Enjoyed :) Be good Billy!

[@williamdeberry3232]

One is home owners pro Mac or commercial use or professional use.

[@BuckinBillyRaySmith]

THIS MUCH WE NO , JUST TRYING TO TRACK DOWN WHAT INTERNAL MAKE THE DIFFERENCE AS THEY ARE BOTH 54 CC

[@williamdeberry3232]

@@BuckinBillyRaySmith yes the Mac's and the pro Mac are the same CC's. The pro mac or belt to be ran every like login. Pro Mac are just a heavier duty saw. The Mac was for the guy to cut a cord of firewood here and there. I have seen it in all saws.

[@erichusqvansonswanson7955]

And your intake was not a mistake. They had different flow set ups for where they were to be sent. Leave it to our goof ball emissions folks here in the states to think choking down a motor will help thing. Lordy Lordy. Rant over! Much love!

[@WoolysWorld]

That's what I was thinking watching you cut the discs, what a waste of good firewood lol

[@richardwoodward527]

Hey Buckin thanks for this video Ive been waiting for this one thanks. where do you order all your stuff for the mac 1010. Also I have a 20 inch bar on right now and every time I start cutting into wood the chain tightens up so much it wont run is there a cure for this thanks

[@jolkraeremeark6949]

Richard, check your sprocket, the sprocket on the clutch drum. Don't know if that is your problem, but it was mine. The sprocket can get worn to point of the drive teeth of the chain get on top of the gear teeth and tighten the chain.

[@BuckinBillyRaySmith]

@@jolkraeremeark6949 GOOD CALL

[@BuckinBillyRaySmith]

LOOSEN CHAIN ABIT AND KEEP THE OIL GOIN' TO HER ,, ALL SO MAKE SURE YOUR ADJUSTER IS ALL GOOD LET US NO

[@kurtgolden7488]

thats when walker ported them you think

[@garycrawford2622]

hi to all the buckin army keep up all the good work love the vids buckin

[@BuckinBillyRaySmith]

THX GARY . LOVE TO YOU AND YER CLOSIN'S

[@TorLangvand]

Buckin' do you mind sharing with us what brand / type oil you use to run your saws, both Macs and Husky's?

[@BuckinBillyRaySmith]

2 STROKE STIHL ,,MADE BY CASTROL

[@TorLangvand]

Thanks Buckin’. You’re up early as usual, I see 👍

[@georgewallacejr5644]

Iove the old saw👍🏻👍🏻👍🏻🙏🏼

[@TreeTechLLC]

Dose full house make a difference in? Locally only full house I can get is a Stihl green chain.... The low kick back.... Is it worth it? Or stick with skip?

[@tonyjones770]

Hey buckin this should be a good test ✊✊✊

[@lawnmanmartinfan7909]

@Jeremy Bell are you taking orders to port and polish ? I have a McCulloch pro Mac 10-10 electronic ignition that I would love to have worked up. Great video I love watching that pro 10-10 chew wood baby

[@jdyer4066]

Restrictor plate chokes the saw down

[@johnbrown8627]

hi buckin from scotland .do you like homelite chainsaws

[@BuckinBillyRaySmith]

LOVE THEM

[@2-MuleTeam]

John, I have an early (blue) 150 Automatic, which was my dad's, and which appears to have very good compression right now but no spark. I want to get it running. Do you have any good web sources for working on the points and ignition system in general? Cheers . . . 2-Mule

[@ducklive1518]

I just wonder why you pull the start-rope up before shutting the saw down!

[@JCrook1028]

I forget the exact mechanics but, you know how sometimes the pull cord "fights back" and jerks when you try to start it? That's what this prevents.

[@hopper336]

When you hit the kill switch, you'll feel the cord pull back as the saw shuts off. Shutting it down with the cord out just helps save out the starter mechanism. You're basically providing a little cushion for the cord to jump back.

[@ducklive1518]

@@JCrook1028 I have experienced that on my 30 years old saw yes! Thank you

[@ducklive1518]

@@hopper336 I see, thaks bro!

[@customcutter100]

Did you ever find out why the Pro Mac ran stronger than the 10-10? Compression comparison, squish, timing on intake, exhaust, or transfers? Just bought my first Mac today and it was a Pro 10-10, so maybe I got lucky. Thanks for your video's.

[@waltermejia779]

Great testing mr BUCKIN!! Learned something new thank you, be KIND everyone

[@BuckinBillyRaySmith]

WELCOME

[@waltermejia779]

Buckin' Billy Ray Smith Mannnnn I miss the Sunday live chat, I had no WiFi but I got to watch it later in the afternoon, all my coworkers love watching the chat, we love when you play the harmonica 😁😁😁😁😁❤️

[@cherokeebilly69_jeepnwv11]

New to your channel, and really enjoy your videos. I’m a Diesel mechanic for Pepsi in Nitro WV. By day and a weekend Warrior firewood bucker on the weekends... LoL. I have a Stihl ms391 stock, that I’ve been thinking about porting. After watching this I’m definitely going to have it done. Thanks Again Buckin. Stay safe and keep up the great videos.

[@mattfleming86]

Greetings from a little south of Wayne!

[@hopper336]

Does Jereme strictly work on Mac's?

[@spanky5476]

Hey Buckin That intake gasket looks very Restrive versus the other larger ported one. More air flow = more power throughout the powerband . Porting will also make a fair difference as well. Not sure why they would have restricted the airflow on that air intake gasket . Maybe somebody messed up on Assembly of the unit . Not sure if they are all like that , or it just being an odd ball build ?

[@rcsnow22]

Love my McCulloch's to . Totally with you on that . I have 10 or right at it . 7ea. 610 Pro Mac's that I just love and two in the 80cc class . A 82cc Double Eagle 80 and a older 80cc 300 . And 2 510 Pro Mac's that i wont talk about right now .

[@michaelbradley5247]

Buckin This video made me get my dad's old pro Mac 55 out and let her scream for awhile thank you

[@marcoantonio078]

Has the exhaust port been opened up also? It's a fine balance, what you lost in bottom end you may find you have gained in top end. Sure is interesting. I picked up an old 5-10 for 40 shackles over here in Scotland. You don't see many over here!!

[@jimnorthern9587]

The Pro Mac has a wider throat at the intake. that allows the fuel better distribution/break down within the cylinder and better combustion in the chamber. same deal when you put a wide-open, or what is called a 360-degree plenum on an auto engine your building up. open that throat up on the other intake and you will see what i am talking about. or just swap the two base plates between the two saw's. the power and Torq difference will now change from the one to the other. that would be my guestimation from years of building engines for my trucks. Jim in Dah UP

[@kevinpeterson3096]

Piston type and or compression? Shave the head down a few on the stock 10-10 automatic and see what flys

[@mikedionne8187]

It's a clamshell type motor, head isn't a separate piece so can't shave it for more compression. Only way to increase compression is to add material to top of piston and then machine it down for proper squish.

[@duncanmacdonald3164]

Thanks @Mike Dionne. I have heard the expression “clam shell” before but never understood what it meant until now.

[@mike99ify]

Holy crap Buckin did I hear that Buckin stock is coming to my home state of Michigan? Where at in Michigan? I’ll definitely attend would be a fun vloggyvlog kinda video for my channel. Lol.

[@AuctionIndiana]

Head to the website for BuckinStock info in Union, Mi *"She Cuts eh!"* *Soldiers of Kindness* *Share&Show* *your* *support* *With* *Buckinbillyray* *Attire!* *Hats,T-Shirts,Sweatshirts,Patches&Stickers!* *www.buckinbillyray.com* Like the music?....original music by Buckin buckinbillyray.bandcamp.com/releases Mum's (Sherry)original music bandfromglad.bandcamp.com/releases Hogan's band theoddneighbourhood.bandcamp.com

[@duncanmacdonald3164]

Right-y-o @Brent_Auctions_Indiana. The venue link on the Buckinstock page is working now... Go to www.buckinbillyray.com/buckinstock and click on the Summit logo.

[@jamesnelson1953]

Has bobby walker finally quit messing with saws or is he just busy

[@Woodman_Custom_Sawing]

I believe his son still runs a shop.

[@BuckinBillyRaySmith]

CRAZY BUSY

[@duncanmacdonald3164]

Marshy yes, Donny still runs Walker Saw Shop in Nanaimo, BC. walkerssawshop.com/ They recently moved so if your Google search shows you something that says ‘permanently closed’, that is the old address.

[@MrPlayer258]

Where can I listen to your wood song?

[@AuctionIndiana]

*www.buckinbillyray.com* Like the music?....original music by Buckin buckinbillyray.bandcamp.com/releases Mum's (Sherry)original music bandfromglad.bandcamp.com/releases Hogan's band theoddneighbourhood.bandcamp.com

[@kurtgolden7488]

the professional spouse be bigger cc i looked it up on google its like 6o 64 cc

[@spanky5476]

My dad and i used to run these old saws back in the day when he was still alive.

[@joshuamartin6141]

Just picked up a Pro Mac 10-10 yesterday, and a DHS 5-10....and an Eager Beaver

[@marcoantonio078]

As heavy goods mechanic I can almost guarantee that that gasket/spacer will slow down air flow. Also porting/polishing is a very interesting subject. Check out David Vizard videos on porting the BMC A series engine with Weber twin choke or standard SU 1"3/4 carb. Very interesting and may help you out some or just for info it blew me away. A Dyno would be ace!

[@Pennsylvaniagoldandgems]

Love this video buck, freaking awesome enjoyed it as much as your axe building. My question is the carb on the mac 800 larger than what on the 10-10 And are they compatible? Maybe the 800 carb on the 10-10 would RIP and be a upgrade with the larger jets.

[@BuckinBillyRaySmith]

WE ARE EXPERIMENTING YOU BET

[@winterswijk1970]

I LOVE THEES VIDEOS,,LOVELOVE ,, OVER AND OUT.

[@BuckinBillyRaySmith]

RITE ON

[@jerryfuqua3781]

Why do you pull the starter rope out before you hit the kill switch?

[@mikeyyoyo6464]

Jerry Fuqua hi Jerry it's something to do with the starter Pawls on the older saws, the small wings/dogs that flip out to catch the flywheel. I've heard Buckin say it saves em out but I still don't understand why lol, hopefully this helps buddy, chin up 💪❤️👍

[@ryanssawmill8224]

Man wish my sawmill was on that pile beautiful timber

[@taylorbrian89utube]

Me to friend! Those are some nice straight logs.

[@timothyschumacher660]

What part of Michigan are you coming to

[@mikeyyoyo6464]

Tim Schumacher heard him say Union Michigan Tim 👍

[@duncanmacdonald3164]

The link to the venue seems to be working on the Buckinstock page now: www.buckinbillyray.com/buckinstock

[@damonhart1268]

how does a pro mac 650 compare to the pro mac 10 10, when cuttin decent sized wood?? i have recently bought a 650 ; and have had a Pro Mac 10 10 as well as the 10 10 Automatic for a while now....just dont get to do much cutting ( back injury ).

[@jarnth]

Be well soon Friend. You will be running them ;)

[@georgewallacejr5644]

Hey buddy love watching them chainsaw run💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🙏🏼

[@hopper336]

Hey Brother.... Those Bell hopped saws sure get it done! Hi to the Buckin' Army!! Had a comment up here earlier this morning, but it seems it got deleted for some reason??

[@briansheldon1279]

according to chainsaw collectors corner the 10-10 is 54cc ,and the 10-10s 57cc.

[@BuckinBillyRaySmith]

CORRECT NO s IN THIS MOVIE

[@brianhorn1511]

Thanks for all your awesome videos!! Im hooked now, just bought my first Pro Mac 10-10 off of Kijiji today, runs beautiful, paid $275 LOL ! maybe too much but .....oh well :)

[@keithrayeski3147]

would Bell Hopper share his recipe for what magic he worked on the 800?