Power Window Regulator & Motor - Jeep Grand Cherokee

[@seandeady]

This was the most helpful tutorial to fix something I have ever seen. I did this step for step thought it would take me 3 hours and I did it within 1. Thank you so much you are awesome!

[@ManleyMachines]

Ive been watching SMA for over 6 years, enjoying every one. Ive never really gone back to the earlier vids until today when I was searching for a video on exactly this replacement. How awesome is that, I get the tutorial and I get to enjoy some SMA classics.

[@JamoRox75]

In Australia here and just got an 07 Grand Cherokee. Just found Out the window clamp is broken. But thanks to this video was able to open up the door panel and find out if this was the case thank you very much for this video it was very helpful

[@captainjack8823]

Great job y'all. I used your video to keep my wife's driver side window up. I found that one of the two nylon rollers was absent and the other was worn down. So that's as far as I can take it for now.

[@sabergermd]

Great video! The other videos on this subject are for earlier model Jeeps than the one I have. I have a 2007 Grand Cherokee. This video was spot on. I just followed the steps in the video and other than having some old window clamps that needed some persuasion to let go, all went well. Thanks for posting!

[@SouthMainAuto]

+Scott Berger Glad it helped!

[@63256325N]

Good idea attaching something to the glass to keep it in the up position instead of fighting with it. Thanks for the video.

[@ronaldcach2779]

Thanks for taking a lot of guess work out of replacing the driver side motor window on my 2002 jeep liberty . THANKS FRIEND

[@davidchase537]

Loved the video I have 3 things I need to replace on the door panel so I think I will wait and replace all of them together.

[@tatargorkem]

thanks for your time making the video , you save me a lot of dough and time...

[@Rakatawhat]

I like that little Dewalt impact, that thing is fast. Don't like messing with door panels, always a pain in the butt.

[@SouthMainAuto]

Rakatawhat Yeah all of there 12v stuff seems to work well.

[@tag6452]

nice vid, it helped me out a lot on my 07 grand cherokee

[@mikechiodetti6737]

Nice job. Quick, but not sloppy! Good Video!

[@mmccarthy19631]

Going to attempt this. the assembly at Mopar was $230 and a dorman is $100 less so I think I'm going to have to go with the dorman

[@josephdeak2257]

Thank you excellent explanation

[@EppingForest304]

Nice video. I was hoping to see a close-up of the regulator mechanism to see which part had broken. If the old elec motor is working, can only the window mechanism be purchased & reattached to the old motor?

[@SouthMainAuto]

EppingForest304 MMmm not sure on this one. Sometimes on certain models you can get a regulator with out a motor.

[@captainjack8823]

Great question because I'm wondering the same thing. My Comment should be the first one in the "newest replies" category. What did you find out? Everything's good on mine save for the two nylon roller wheels as one's completely gone off it's stud and the other is worn too small to stay in it's track.

[@ronaldjohnson1474]

Asking your dealer/auto parts store will answer this question.

[@vstrom9586]

Great job, thanks a lot

[@whatfayesay6607]

Do you remove the batter cable before you replace a power window regulator?

[@mariocabrejo70]

Great video, thanks for sharing

[@skionn]

Thanks for detail video, I have problem with rear window, roll down but it wont roll up. I did not remove the regulator out of door panel yet and try different switch and same result then I detached the motor from regulator (only motor without mechanism behind it) and try it and works in one direction and not the other. Do you think the problem is motor?

[@klwthe3rd]

Is this same basic design the same for most domestic car/truck regulator removals?? I learned a lot from this video as regulator removals always have scared me because I was never sure how they would come out of the door at one solid piece. I really like those suction cup holders. Do you happen to remember where you bought them?

[@livefree30]

thanks very helpful

[@kixphantom1523]

You gotta be kidding me. I may be looking forward to this in a jeep commander. Your video doesn't inspire me, although it may save my life.

[@upurnose46]

Number 1 killer of window motors? Unlubricated window seals. Put some silicone on the window seals on the bottom of the window so the window motor doesnt have to work so hard

[@klwthe3rd]

My problem has always been finding the proper lubricate to use in those window regulator tracks. You need something that is highly resistant to water, like silicone, but that has a super high-temperature resistance and is synthetic to resist gumming up over time like most petroleum-based greases.

[@ajaypro2881]

I have a 2007 Grand Cherokee. Unfortunately my window due to frigid temps froze my window and I could not put it back up. Could I just replace the motor itself??

[@279spirit]

Mopar baby! Easy job!

[@langer24106]

What if the regulator is inside a riveted panel with no access?

[@navigatorx1013]

usually there is a dent in the sheet metal where to drill an access hole to get at the rivets. drill out the rivets too. support the glass every time.

[@kennywilliams8978]

Thank U

[@daveyt4802]

My passenger side window is stuck up. Using this for DIY at home. Thanks! $140 for parts @ local store. Too much!

[@geojor]

thanks...

[@gabe3922]

I know im commenting this 7 years later but has anyone had the problem where your window would get scratched when rolled all the way down after the install? It’s probably not noticeable to glass with no tint but i have 5% on the front windows of my Cherokee and every time i roll my passenger side down the scratch starts to get bigger going up on the bottom side of the window towards the side mirror. If anyone had this problem before would y’all please reply and tell me how you fixed it or what I could’ve did wrong. Thanks.

[@bigjohn1136]

Cool x

[@radiochat102chat2]

CLUSTER NEEDLES STILL FADE AND WINDOWS STOPPED

[@markmeadows8977]

Ok

[@radiochat102chat2]

mi grand cheroke is 2000

[@felm3283]

Great job master…