🔥 POWERHOUSE PLASMA CUT40 | TEST | SETUP | REVIEWS | Lets Do It!

Hi Guys... today we are going to review, set up, and test one of my favorite machines in my fabrication arsenal.
The Plasma Cut-40 from #Powerhouse, this machine is powerful that can cut as much as 12mm in thickness using only a compressor air supply.
We hope that these reviews and tutorials will give you an overview of this product on how to set up and use this machine before getting one for your fabrication arsenal.
POWERHOUSE TOOLS
Plasma Cut-40
bit.ly/3dscaPD
bit.ly/3pATqQs
Other Videos
POLARITY SETTING: • 🔥 HOW TO STICK WELD TH...
WELDING THIN SHEET METAL: • 🔥 HOW TO WELD THIN SHE...
#PlasmaCuttingMachine
#PowerhouseTools
#PlasmaCut40
#PlasmaCut60
#PlasmaCut100
#Fabricator
#Welders
#Jacobo
#SMAW
#NC1
#NC2
#NC3
#2G
#3G
FOR BUSINESS:
For Product Promotion, Unboxing, Test, and Reviews
Contact Us: 📩 [e-mail]
Be a PATRON: / fabandweld
SUBSCRIBE: / @fabandweld
LIKE AND FOLLOW US: / letsdoit2021
WAIT!!!! Before you leave... Please HIT LIKE, SHARE, SUBSCRIBE BUTTON AND THE NOTIFICATION BELL So you will be notified with all new upcoming videos.
Thank you and God Bless!

[@FabandWeld]

We come to our knowledge that this video has Become Unavailable to view, unfortunately, our channel has not the only one having the same issue but many due to some KZbin technical error, hoping to get this video back soon!

[@joelbuitizon6187]

Sir how much saan nabibili plassma cutter.

[@marioedwardmaamo5803]

Ok yung review sir malinaw, naintindihan sa mga viewers, salamat

[@aritomo12]

ayus! siguro ito na next item ko.. more videos and tutorials po :)

[@TitoJaksVlogs]

I always appreciate your videos, Sir! Keep it up!

[@FabandWeld]

Thank you so much😉

[@mansuetocajaban6803]

Salamat sa pag totoro

[@japatful]

thank u po sa info ...More Power!!

[@FabandWeld]

Maraming salamat kabakal... mabuhay po kayo!😉🔥

[@FRANCELL06]

Galing nyo mag demo boss. Kumpleto rekado 🙌

[@FabandWeld]

Salamat kabakal.... please consider to subscribe, like and share our videos para sa mga susunod pa nating tutorials at review...😉

[@reuelsoul7794]

very informative kabakal thanks, new subscriber here.

[@FabandWeld]

Awesome, thank you!

[@boymugnaadventure2967]

New sub po boss... Salamat sa kaalaman boss God Bless po...

[@jonathansalon7561]

Gusto ko magkaron nyan Bro.!

[@jenglinux4948]

Sir pwede po ba Yung air compressor na maliit lang like Yung Total na brand tapos 120psi ? Masyado po Kasi bulky Yung mga nakikita ko na gamit sa mga vulcanizing eh

[@rened.esdrelon5295]

Can you please recommend for the specifications of the compressor that is best suited for this kind of machine?

[@FabandWeld]

Yes sir.... For this machine, if you are not cutting lots of metal then you can use at least 40/60 liters tank capacity of compressor with 1or 1.5 HP Motor. But this capacity has very limited air pressure so when you cut a bit long materials the pressure drop in a short period of time then your cutting will be affected. My compressor has 90 liters capacity with 1.5 HP motor and its enough for the kind of cutting i used to make without droping of air pressure. Of course you need also to consider the price... the more capacity of liters the more expensive.

[@ernestomaonio1165]

Anong size ng compressor ang ka match nyan sir?

[@amigomoto7389]

Anu po mga kylangan kng bbili aq ng gnyn anu ung complete pra mgamit ung plasma?

[@weldon2848]

great and nice video , thank you

[@marvensumampong5488]

San Tayo makabibili Ng plasma na gasless? At pweding madala Kong saan2x

[@ryanrey5376]

pwd dn po eto pang hinang?

[@jamilbernardo417]

Sir @FabandWeld update po sa machine buo pa po ba?

[@FabandWeld]

Buong buo pa lods kumikitang kabuhayan na ginagampanan nya sa ibang kamay😉

[@NasVenture]

pede ba yan pam putol ng aluminum at stainless at copper

[@FabandWeld]

Yes sir Plasma Cutter can cut any kinds of metal basta may electrical conductivity kaya nya and this machine cut safely below 12mm thick and if you need to cut some thicker metal above 12mm probably 1" then you need higher Amps Capacity like the Cut 60A and Cut 100A.

[@roychedumaguin6069]

Kulang pressure ser Yung supply Ng hangen

[@i09089309017intal]

Mga sir.mga ilan litro compressor kelangan.sapat na po ba yun 8liters o 30liters

[@FabandWeld]

Mas mataas mas ok Po para Hindi mabitin Lalo na kapag makapal Ang I cut nyo. Kapag maliit capacity ng compressor may chance na hihina sa kalagitnaan mabibitin Ang torch.

[@rogeliomorenoamantejr3893]

Sir Pwedi po ba gamitin cutting sa stainless plate 12mm ang kapal?

[@FabandWeld]

Pwedeng pwede sir... Aluminum, Stainless, Steel Plate... kung makapal na like 12mm need mo i saksak yung machine sa 40A/60A breaker at malaking extension chord dahil mataas yugn current na kailangan nya sa 20A/30A at normal cable wire sa bahay mabilis mag trip yung breaker kapag nag init yung gamit mong extension sa power socket. dahil nga makapal yung bakal matagal ang babad ng plasma... taasan mo din yung supply ng hangin at least 70/80PSI

[@alexesfelmorecapadngan2832]

Sir 200amps power house pidi po ba stainless rod?

[@FabandWeld]

Yes po kayang kaya sir kasi yung Stainless rod naman maximum na yung 180A sa 5.0mm na laki ng elecrode yung 2.4mm 50/90A ang range nya yung 3.2mm 70/120A

[@alexesfelmorecapadngan2832]

Thank u idol dami ko na22nan video mo

[@deohertzodarap7070]

gaano sya katagal nakababa sa cutting?

[@isabeltaduran8443]

Maganda po sir pero kung ako sa grinder nalang cguro ako keysa jan..malapit nako magkaroon ng mma300plus salute sau sir

[@FabandWeld]

Pag sanay kana sa grinder ok sya versatile kasi ang function ni Grinder pwedeng Cutting, Grinding at Buffing lalo na kung may variable speed ang grinder mo or yung na aadjust ang speed nya. but kung hindi ka sanay sa grinder always keep safe protect yourself and wear face shield and eye protection. Si plasma cutter naman mas ok sya sa cutting lalo na sa area na makipot na hindi mo magagamit ang grinder at mas safe sya gamitin kesa kay grinder just for cutting purposes.

[@lestertapaya4263]

Sa oxy acetylene kinukumpara yan nd sa grinder...

[@ChristianRegalario21]

Nice mayron narin akong plasma cut 60 powerhouse din medyo Mali lng Ang recommend compressor ni powerhouse dapat mas malakas 2hpna oil less Ang nabili ko

[@dariusacevedo6369]

sir wala po ba yang brand na yan nung 4 in 1 na machine? kasama na plasma, tig, mig, saka stick? salamat.

[@FabandWeld]

Wala pa sa ngayon pure PLASMA Cutter lang talaga yung unit na yan na meron si Powerhouse

[@philipliongco923]

san kaya nakakabili ng tip nyan

[@leejoosixtyniners1293]

Boss idol,dapat ba continuous andar ng compressor habang ginagamit Ang plasma cutter? salamat boss idol

[@FabandWeld]

Continues yun boss nasa first floor kasi naka pwesto yung compressor kaya di marinig sa video yung andar nya, at malaki yung gamit nating tanke 90psi Air Compressor kaya medyo matagal bago sya mag restart kasi gamit lang natin is 60psi.

[@leejoosixtyniners1293]

@@FabandWeld maraming salamat sa sagot boss idol.

[@nemuelsawe9849]

Ang sarap mag karoon ng ganyan sir, magkano nyo po ba nabili yan sir?

[@junscraftsvlog6632]

Kabakal bagong subscriber nyo po ako.. may pawer house plasma cutting machine din ako na ganyan. Matagal ko na rinitong nabili, kaso ngyon nagkaprolblema na cya... ayaw nang gumana ang torch nya. Tanong ko lng po... ano ba ang madalas na sira nito at paano po ito gumana ulit.

[@FabandWeld]

Napalitan nyo na po ba ng Electrode yung nasa Nozzle ng Plasma Torch? Minsan po kasi kapag wala ng Dumadaloy ng Power or Spark yung dulo ng Contact TIP kadalasan na issue ay yung over use or busted na Electrode. Consumable po kasi yan kaya dapat lagi nyong tinitingnan bago nyo gamitin ulit ang plasma cutter nyo. Message nyo ako sa Facebook page para mapakita ko s ainyo yung kung paano nyo malamang na busted na yung Electrode sa torch nyo.

[@motoestilocustomsDwaynde]

Paps ilang hp needed na compressor? Kaya kaya mga 1hp ?

[@FabandWeld]

Pwede naman po basta yung capacity ng Tangke at least 60Psi pataas yung pressure at laman nya nasa 60 to 80 liters para hindi mayat maya ang andar ng motor para mag karga n hangin.

[@elpenot]

ilang horse power ang ginamit na compressor nito at ilang capacity ang tanke Sir? salamat

[@FabandWeld]

Kahit 1HP lang po and 60liters Pwede na yun pero mas mataas na Tank Capacity mas ok po para matagal ang pag baba ng pressure pag consistent kasi ang pressure mas malinis ang cut

[@wabyyyu]

Mas maganda ba gamitin compare sa grinder nalang?

[@FabandWeld]

Compare po sa grinder mas maganda yung plasma cut lalo na kung may design at hindi deretso yung cutting, mas mabilis at mas safe din sya compare sa Angle Grinder. may certain cut na kaya nila pareho ni Grinder pero may mga cuttting din na hindi nila kaya pareho depende po sa situation at kapal ng mateyales.

[@smoke_stackz3168]

Oxy acetylene eh 40 psi lng po masmababa pressure kesa plasma cutter pressurized silang dalawa boss

[@ronaldworks2933]

kaya po ba ang 25mm na kapal?

[@FabandWeld]

Itong Cut40 po max to 12mm lang yung Cut60 kaya nya 18mm with clean cut but not advisable to thicker like 25mm makaputol man pero atrasado or hirap at panget ang cut.

[@amigomoto7389]

Boss kylangan pb jn gas?

[@philipliongco923]

idol san nakakabili ng tip nyan pangit ng nabilhan ko walang after sale service

[@FabandWeld]

Lazada sir meron type nyo lang PT-31 CUT 40 CONSUMABLES marami po dyan makikilala nyo agad yan sa itsura palang.

[@allanlen7446]

Gusto Yan boss Saan makabili

[@GeneCaralde119workshop]

Kaya ba ng 30A na breaker yan?

[@FabandWeld]

Kaya pero hindi tataggal boss. mas mabuti 40A/60A/100A para iwas tripping ang breaker mo.

[@ranniemayhay2181]

Pwede kaya yan sa 8mm , 10mm at 12mm thick ng steel ?

[@FabandWeld]

Max 12mm kaya nya sir about 30/35A and 75/80 psi air pressure.

[@nelsonvinluan289]

Kaya bang e cut yun stainless plate na 5mm po?

[@FabandWeld]

Yes sir kaya po at pag maganda timpla mo ng amperahe at hangin malinis ang tabas nyan

[@jerryjeremy4038]

boss bakit hangang 60psi ang settings mo? hangang dun lang ba ang pwede? hindi ba pwede gawin 90psi para mas malakas ang hangin?

[@FabandWeld]

Pwede po till 80 PSi depende sa kapal ng bakal. Kung nasa Maximum 12mm k pweds po 70/80 Psi para mas mabilis at maliniz ang Cut. Yung settings ko mababa lang bago pa machine nung time nayan kung baga trial run muna bago natin isagad sa bakbakan.

[@jerryjeremy4038]

@@FabandWeld salamat po... Magnko po bili nyo? Nakita ko s shopee 15k.. mahal po mxdo yun?

[@jamesbryanvillaverde2252]

Sir paask lang anong compressor po? Air compressor?

[@FabandWeld]

Yes po AIR Compressor, Mas malaki Capacity mas maganda para hindi atrasado sa Cutting.

[@genome692002]

pilot arc na ba yan?

[@FabandWeld]

Dipa sir scratch arc plasma po ito.

[@ArnelVestuir-jt3nh]

sir wala nabang gas gagamitin?

[@FabandWeld]

Air Compressor lang po sir or Compress Air (Oxygen) pero mahal anhg oxygen kaya mas ok ang Compressor lang at least ang makina mo 1Hp 60liters Capacity

[@markpelagio690]

Ilang hp na compressor ang pasok jan sir?

[@FabandWeld]

60PSI to 100PSI po depende adjustment nya sa kapal ng Metal na puputulin nyo. mas makapal mas mataas na amps at hangin kailangan nya para malinis ang cut

[@successfulmindset3404]

hm sir

[@carusotimmy]

Good day.. Sir magkano po yan?

[@FabandWeld]

nasa Php. 15,190.00 sir sa Lazada Store mismo ni Powerhouse, check nyo po dito: bit.ly/3hCUUvj

[@frediemaco9021]

Hanggang anong kapal ang kaya nya?

[@FabandWeld]

12mm po 40A and 70/80 psi air pressure. Kailangan ang saksakan may 60/100A na fuse or cirquit breaker dahil malakas humatak ng kuryente ang plasma nag t-trip yan sa 30A and need nyo rin malaki ang wire ng extension di pwede ang maliit na cable para iwas trip or ON and OFF ang breaker.

[@angelosales888]

Boss tanong ko lang.. bumili ako ng hawig niyan pero mailtank yung brand. Ayaw mag arc. Ano kaya problema?

[@FabandWeld]

Check nyo yung Electrode sa Loob ng Torch baka Damage na, Then sa pag start scratch or konting kiskis mo lang sa bakal para mag sindi ang ARC then keep mo yung distance nya about 3-5 mm and Kailangan malinis ang bakal kasi hindi yan mag ARC kapag may kalawag or Pintura dahil kailangan nya laging mya kontak ang arc sa metal.

[@angelosales888]

@@FabandWeld salamat sa reply boss.

[@kevinpatrickagravante1962]

Madali ba mabili consumables nya boss?

[@FabandWeld]

Opo available po yan lalo sa lazada check nyo lang Plasma Cut40 Consumables then yung design nya para sakto mabili nyo.

[@smoke_stackz3168]

130 psi sakin masmagsnda boss lalo sa makapal kung 60 psi lng madali malusaw consumable mo

[@Kabakal23tv]

Gang ilang kapal kaya Nyan boss

[@FabandWeld]

Sa Cut40 Po up to 12mm clean cut na yun sa Cut60 up to 16mm.

[@Kabakal23tv]

@@FabandWeld how much price po sa cut 40

[@samplacido137]

san nyo po na order sir at magkano?

[@FabandWeld]

sir check nyo po sa caption details ng video may link po kaming nilagay sa website ng powerhouse at lazada...

[@paomor7779]

Inverter ba ito

[@FabandWeld]

Yes sir inverter po yan!

[@ronaldworks2933]

ano pong kaya nyang icut ng ganyan po?

[@FabandWeld]

10mm pong kapal ng bakal pababa... mas manipis mas mabilis ma cut... (Plate) Mild Steel, Carbon Steel, GI Galvanized Iron, Stainless. and Aluminum

[@ronaldworks2933]

@@FabandWeld salamat po balak ko po kc bumili

[@FabandWeld]

@@ronaldworks2933 kung mas makapal sir balak mo para hindi ka atrasado yung plasma cut 60 kunin mo mas ok sa makakapal yun up to hald inch cut. Pero ako kasi sa shop ko maninipis lang naman so ok na sakin ang cut 40. Basta may compressor ka 40/60psi pataas ok na yun.👍👍👍

[@nhey1181]

Compressor lang po ba wala gas?

[@FabandWeld]

Yes po compressor lang kailangan nyo para sa machine na ito.

[@nhey1181]

@@FabandWeld wow..nice talaga salamat po sa tugon

[@smoke_stackz3168]

Mali pag set nyo boss i trigger nyo muna saka mag set k.c babagsak pressure mo pag na trigger mo na

[@andrewgavile7994]

How much ana boss

[@FabandWeld]

Paki check nalang poi dito sir: tinyurl.com/bd5h33zw

[@jay-rgabijan4330]

Nkabili kami Ng bago,,walang spark

[@FabandWeld]

Scratch Starts po sya sir... yung contact tip nya slight nyo ikiskis sa bakal na para mag start yung arc nya or mag spark. Hindj po sya Pilot Arc. Na try nyo na po yung ganun?

[@alexhernane8801]

Boss mag kakano price nyan

[@FabandWeld]

Boss... paki check nalang po dito' bit.ly/3bP5yZR

[@benjaminvillafranca8623]

Magkano po bayan salamat

[@FabandWeld]

Nasa 14,488K sir. Paki check nalang po dito: s.lazada.com.ph/s.Wvgo3

[@salvadormacabodbod7985]

Mgkano yan ngaun sir?

[@FabandWeld]

Sorry sir late reply... nasa Php. 14, 488.00 pa sir, check nyo po dito: bit.ly/3pPgSLI

[@smoke_stackz3168]

Sa totoo lng nahihitapan sa 12mm yan kc ung cut 60 kaya 25mm pero ung kaya lng eh 3/8 thickness lng

[@nemuelsawe9849]

Sir sana ako mapili mo regalohan nyan maraming salamat po.

[@goyzkieuchiha2376]

Salita pa nakita namin,, magpapa subscribe ka na

[@danstangenovaii129]

Sir bakit di po ma view video niyo.. need po sana info for this product.. yung nakalagay lang is "This video is unavailable on this device" Tried viewing your video both on Desktop and Mobile still the same issue.

[@FabandWeld]

Thank you na noticed mo sir check po namin may technical error po ata sa Channel! Will be right back to you soon!

[@FabandWeld]

Sir @Danstan Ok na po ulit may issue lang sa KZbin Config! 😉

[@danstangenovaii129]

Thank you po .. ☺️ Pwede ko na po ma watch thankss☺️

[@FabandWeld]

Sige sir, pag may tanong po Comment nyo nalang po dito sagutin po namin sa abot ng aming makakaya at kaalaman.! 😉

[@arielgomez8858]

Sir pwd pakita sa next video nyo yung pag setup ng plasma torch.

[@rened.esdrelon5295]

Can you please recommend for the specifications of the compressor that is best suited for this kind of machine?