We Build a Demolition Derby Truck - Trucks! S10, E17

[@PowerNationTV]

We'll continue to post these episodes here on KZbin. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/trucks

[@shawnsnyder8876]

Little tip put the straight treads on back and diggers on front it will save you rear end

[@Joedennett69]

Each one of those trucks someone brought home new and was proud of it once.

[@joes_junkyard]

That’s the sad part

[@firstbutstilllast9437]

And now it’s scrap metal get over it

[@benjaminbooth6471]

@@joes_junkyard not really sad everything has to come to an end, and at least these trucks are giving people thrill and excitement

[@joes_junkyard]

Ya I guess but these trucks are getting harder to find people love the classics

[@flyguyphil7247]

Idk about that there was a ford in the mix

[@killamike6403]

that's my all time favorite chevy trucks, 73-87, breaks my heart seeing these destroyed instead of restored lol

[@Studio_Earth]

Gotta start looking for chevys near this place. In central Pennsylvania prices, this is like watching a Ferrari demo derby.

[@merc-ni7hy]

i'm in pa..not really any chevys like this around

[@Geeds69]

Up in canada those trucks would have been considered rust free and mint projects. Unreal that those got smashed. Like are those for real rust free cabs??? Do you know what you could sell those for up here? Lol

[@bobroberts2371]

I just bought a pre 1980 Chevy cab for $ 2,500 , not the entire truck, just a cab with doors.

[@npp3559]

Studio Earth I’m in western pa and thinking the same thing

[@RedEyedPatriot]

I've got 8 of these trucks rt now....kentucky

[@toddfletcher565]

That truck was in better shap then my project truck mine is an 1981 Chevy

[@likenem]

Its weird being from the mid west, I can't believe you are destroying those truck beds that don't have rust

[@ford1979truck]

Im from eastern canada . im jealous all these rust free parts

[@likenem]

@@ford1979truck I was in Windsor and noticed everyone on steal rims and then I realized those are for there winter tires. You guys are smart up north.

[@RichyN25]

That truck was worth a lot more than a derby lol

[@TDSG34]

This was painful. What are you thinking? I can't even find a truck as good as the one you are going to destroy.

[@RedEyedPatriot]

I've got 8 here in Kentucky...ill sell you one😂

[@ej2civicb736]

Will do anything for views people watch the show they get millions from advertising firms if they think they will make 500k on a few episodes they would smash up an al original 70 ls6 454 chevelle

[@Valdemar-Perez-III]

Whistlin diesel: "hold my beer "

[@Goodbye-od1le]

You now why trucks nowadays. They are not that strong. I like trucks from the late 80s

[@westogarage]

poor square bodies

[@rustedratchetgarage6788]

@@bigboreracing356 bullshit there all valuable let crash some 3valves or new rams no loss there

[@likenem]

Some dont even have rust

[@ianvader4697]

they're worth a fortune in Australia!

[@likenem]

@@ianvader4697 trade you for a ute

[@jonathonrossebo1783]

@@rustedratchetgarage6788 What are the odds of them being destroyed to extinction from all this are?🤔

[@Cozmcz]

Bro it's sad to see that old square body chevy are destroyed

[@danderson9881]

Best part of the day, smashing chevies

[@AndyFromm]

@@danderson9881 👍

[@unrealfmx888]

Dime a dozen where I live

[@joes_junkyard]

It’s sad to see the old trucks and cars get smashed

[@95roadie]

They built over 10 million of them. They’re still a dime a dozen.

[@tristanabell2117]

A lot of people are mad that they are smashing square bodys but you gotta think most of these trucks dont have titles and the bodys were already rough so they aren't worth parting out. Not all of them but I'd say quite a few of them.

[@jasonkodatt9515]

Cool Video but I would definitely wanna do my cage before welding the doors shut!

[@kunu98]

I’d drive that to work everyday. I wouldn’t care lol

[@i-like-turtles4900]

Hey look. An episode from when Trucks was a good show.

[@philvictor5537]

Makes me mad that people destroy good old project trucks for this. Ugh

[@CJColvin]

Same here brother.

[@CJColvin]

@@bigboreracing356 LOL!!!!!!!!!

[@CJColvin]

@Thystaff Thywill Yep.

[@AlexRivera-pr9cl]

Why not the junkyard would jus crush them so why not have some fun with it "It's just a truck dnt worry " they make them everyday

[@RonSales]

@@AlexRivera-pr9cl not old iron like that they don't

[@dadssmallenginerepair3237]

These trucks are in better shape then what you see on the road here in Ontario. I’d pay good money for one of those rust free trucks

[@seppopaananen8495]

I spent 3 months repairing my old bed and this seems hard to look....

[@choppedandscrewedcustoms]

Why destroy a squarebody

[@CJColvin]

Exactly mate.

[@HODMEChannel]

Half these trucks are not worth saving.

[@choppedandscrewedcustoms]

@@bigboreracing356 have you looked at the prices on original parts and even complete trucks the square body trucks are going way up in value

[@kevinjohnson9372]

Cause they suck that's y lol honestly I'd do the 88to98 style b4 a square body

[@gregc247]

Nooooo!! Not the square body's

[@AndyFromm]

No loss

[@patmcbride9853]

So, you couldn't do the interior work BEFORE you welded the doors shut?

[@OldGriz708]

It's better to do it after so everything can be made to fit exactly and with all the glass out it really doesn't make it any harder.

[@ej2civicb736]

They dont know shit stacy David actually does but when they go to commercial the real builders take over David fryburger and lucky Costa called these shows out on it

[@carlparker3571]

wow! here i thought they were always junk trucks, but they got more money in aftermarket parts than my house is worth, and those truck bodys are in better shape than mine.

[@OldGriz708]

Check out Gropp engineering and see how many thousands of dollars you can spend on a top of the line derby engine. It may be Gropp automotive or something like that.

[@ryandavis5144]

Ski inc, postal mopar, baldwin engines. Takes money to run big shows.

[@gregc247]

All those rust free beds are worth $1500 a pop in the midwest

[@chriswhite2151]

Omg theres even a 67-72 in there .... I never could stand watching demo derbies. Ever since dads 73 Torino wagon bit the dust.......

[@kenleppek]

Thanks for the derby video guys. I love derbys there is just as much ingenuity that goes into derby cars as race cars. Where I live if you don't have 10k invested into your figure 8 car you won't even begin to be competitive. Its big here.

[@christopherwright369]

Having driven a 76 dodge D200 in the local demo derby for 3 years. This is addictive. nothing like smashing and banging. Trucks Hit a hell of a lot harder than cars do.

[@TMSRAGNAROK]

Its awesome but it hurts to watch square bodys get smashed up if you love em as much as i do

[@iggyp7049]

I hate seeing a dent side ford in derby, love that body style.

[@carwashadamcooper1538]

This hurts. Why smash up a good rust free truck? You couldn't get one that's not so nice? Damn, that truck was worth way more than scrap.

[@johnnywrench9669]

I am pissed at you guys for ruining those squarebody trucks

[@jacoblenke6820]

poor baby lol

[@dededallas9574]

You guys are all ways building some wild things have you ever thought about putting two rotors engines back to back

[@bobroberts2371]

1:38 " We are all about safety ", ( gas tank is sliding around in the bed ) .

[@Facebreaker70]

I saw that too!

[@shawnsderbyden1032]

Would liked to of seen them finish the build I think they should revisit the subject with either another truck or a car or some sort because this is one of the few times a show has done something like this and not turned it into a joke

[@edvisme]

As a former derby builder and driver I scratched my head at why did you weld that truck up before doing the interior (seat, seat belts/harness, steering column, wiring, battery box, trans cooler etc) Makes no sense to weld the doors shut before doing those first. Now you all get to climb in and out of that cab to do those tasks. Even more so, good luck getting the stock bench seat back in (which is recommended to use over a single bucket seat.) The bench seat can be use like a "catchers mitt" when making a reverse hit. Just before impact lay down a bit so the seat takes the impact, not the body from sitting up. Also, do not cut away any of the steel from the truck. That hood, if it were cut in the right way, that steel could be wrapped back over the top of the hood and welded down (makes the hood stronger and who cares how it looks.) Outside of those, the build is looking good.

[@wicked650s]

I feel like I lost 12 teeth and 30 iq points watching this.....

[@MrTheHillfolk]

Gug gug jus don't start lovin on yer sister 🤪

[@TB-uz2wu]

kzbin.info/www/bejne/eHzJZJ1-iJ2sba8

[@jaxonruffuihjhgjgiyihbuhy6679]

@@MrTheHillfolk m,! T4

[@RonSales]

I'm sorry 79 for scrap , I should of found it first it wouldn't of went to the demo derby it would of been a frame up resto-mod.

[@OldGriz708]

You should come up to north Idaho, there's a few old square bodies and 60's dodge truck behind damn near every barn. We rent a house that's on a farm, landlord lives on the other side of the barns. Just here there's a '74 k20, a '72 c60, two late 40's/early 50's dodge flatbeds, and two or three 60's Dodge trucks.

[@RonSales]

@@OldGriz708 That's my problem having a trailer and driving that far with my vision without a co-pilot. night driving is out and I'm just off the IL/WI. I-94 interstate.

[@camaro1877]

@@OldGriz708 Hey, dont be telling people about our stockpiles.

[@Happyfacehotwheels]

I'm surprised I didn't see more Fords. Last time I was at the junkyard they had three Chevy pickups and about 20 Fords. There was a lot of dodges but nothing earlier than 1994.

[@OldGriz708]

.........they wanted to win.🏁

[@mrschwifty5564]

Sad some of them trucks looked decent.

[@CJColvin]

I know brother.

[@kevinjohnson9372]

Probably hack jock body work full of blonde to make em look decent for the derby

[@mikehileman9476]

TN does not salt the roads so rotters are not common.

[@صقورالصحاري-ح7و]

🥺🥺 why I love this truck

[@kylekallies3381]

Would put the cage in b4 you weld the doors shut

[@bryantaylor929]

Y’all need to come to Utah and watch our derbies they are way more enjoyable

[@justinraystyles3537]

Poor square bodies!!!😢💔😡

[@jackskonieczny2353]

In Michigan we have to run an ignition switch. No bare wires for ignitions.

[@knatt405]

Dang mid fuel tank seem like the engine should be there j/k. Looks fun but I bet they are sore afterwards but that's what the 🍻 is for.

[@OldGriz708]

It's not as bad as you would think. Like a football player doesn't get hurt badly because he has a helmet and pads and is expecting to be hit hard. In the derby cars you have a helmet and padding on the driver's door and know you're going to get hit by 5,000 pound vehicles. But with that said I have had whiplash over a dozen times, broken nose, both hips pulled out of their sockets, stitches by the mile, and wake up in pain every day but would do it all over again 👍🏁

[@johnnyjohnson5361]

What a waste of a solid square body. Where I live in the rust belt a solid truck like that brings good money. I guess one man's definition of junk is different from another man's.

[@nuttwg6521]

You guys at the shop should all build your own furby cars

[@derbyboy72x]

I like this build . Been around the sport around the sport for 19 years and my boss is a promoter

[@williamsager59]

I love a good demo derby but to see all those old squarebodys destroyed. 😥

[@obs.takuache9405]

This is torture

[@dam1041960]

It's supposed to be stock Ae: run what you bring and tow what you blow. * except for safety mods.

[@keithrindt7488]

Talk about buying a win

[@mikehileman9476]

You put new tires on a derby truck ....This does not compute , captain

[@undertaker666dead]

You say demolition derby truck. I say daily driver.

[@demonic477]

the derby trick back in the 70's was to run manure spreader tires on the cars to get all the grip you could they came in 15 and 16 iin sizes so they were a stock rim fit

[@chevyfan82]

You guys hit an all-time low destroying that square body! You could have done something constructive and rebuild it, but no like idiots you destroyed a good solid project truck, so thanks to you there's one Les project truck for a future build. I agree demos are fun but you got to be messed up in the head to destroy vehicles that aren't in that bad of shape. If you keep smashing up everything that's good what are you going to do when they're all gone? and what will be left for the future generations.

[@OldGriz708]

You do whatever you want with the ones you buy and don't worry about what other people do with the ones they buy.

[@chevyfan82]

@@OldGriz708 why don't you take your own advice and not comment. Truth Hurts huh by supporting them you are supporting destroying Classics of the future!

[@Happyfacehotwheels]

I park my piece of junk in the front yard!

[@dtotheponcharo]

As a body guy from salty ass Syracuse NY, this shit kinda hurts to see all of these straight and solid tailgates, beds, fenders go to such a waste this way

[@rustednbustedmopars6087]

Ah yes derbies before slider shafts, high dollar drivetrains, custom rims, engine and trans cradles. Back when it was fun and didn't take a year to build one car

[@95roadie]

Sliders have been around for 20 years. Doesn’t take a year either, unless it’s a blizzard bash car. Even then, if you already have the shit, it’s literally just swapping the shit over.

[@allinone8172]

How can they destroy this trucks?Even they cost 7000 -8000€ in Germany!

[@daviddonahue1862]

Is there a part two? Did you guys compete?

[@willlothridge3197]

Lmao those boys wouldn’t last no time running around here

[@mustangboss1246]

Good buy to some classics... why not use new toyota hiluxes instead?

[@speedy7892]

4:07 "It's amazing that these trucks even still move." *Really?* Note for this I live in Wisconsin smack dab in the middle of the rust belt I was at my local sawp meet in September and they had a truck derby. Saw a Chevy square body probably in less condition than any of those trucks and it lasted all the way to the rear wheels shredded down to the hub, rear axle dragging on the ground, and frame completely snapped in half. Only reason he got third was because his axle sat higher than the rims (what was left of them) and he couldn't move. Now that's a truck that is amazing it still moved let alone ran.

[@andydeclerck1884]

When are you guys going to do part 2 of this episode ?

[@adamspradling3801]

When I got done watching this I had grown a mullet, was missing 6 teeth, and a natty light was magically in my hand.

[@robertgildea2841]

People in Elmira NY build their demolition derby cars 6 months in advance of the Chemung county fair in Horseheadds NY. Some people build a Dodge stratus into a demolition derby car what is your take on it

[@dred55]

Hey, let's throw 10 grand into a derby truck. Great idea!

[@notsofast5495]

Why did you weld the doors closed before you did any interior work?

[@WesleySnyder]

i dont like this sport ...just think in 20 years there will not be any cars and trucks left to derby.

[@merc-ni7hy]

this sport need to use only crap cars like toyotas and hondas..or those thro away dollar store carts known as kia's and heyundias

[@WesleySnyder]

@@bigboreracing356 it's fine only if it just fords

[@merc-ni7hy]

@@bigboreracing356 what junk is that exactly....you have alot of junk

[@merc-ni7hy]

@@WesleySnyder well that cant happen....ppl running fords will have an unfair advantage

[@merc-ni7hy]

@@bigboreracing356 thats not nice

[@ericbell4697]

Tommy has done derbys all his life. Sux yall didn't get to derby the truck for the show

[@bryanc447]

Modern trucks could never handle this

[@jaaufiero]

These people are destroying American automotive history. There are working class people that could use them to help feed their families.

[@randymorobitto5453]

@Joe Aufiero - If you remember the "Cash For Clunkers" program, how many vehicles could have had new/rebuilt drivelines put in, so regular working people could have something they didn't have to lease (never own), or finance for 4-6 years on their working-class incomes? 😔 Driveline from a wrecked Tempo, for example, put into a failed-engine/trans one? It COULD have been a whole new industry for then-unemployed mechanics and body people... The working classes ALWAYS get screwed.

[@leeroy7817]

Nice build bud. Should went ford with Chevy drive train.. but looks like you know what y’all are doing !

[@williamsanders468]

Idk if it’s just me but why destroy a truck

[@mrcrazy6333]

Where is the rest of the build video??

[@synapsesuicide4372]

I grew up learning to drive on a Scottsdale I absolutely love those trucks. I would love to slam one on bags, looking like a hillbilly-rat-rod with "patina" I don't know why but I think these trucks just look great and they are built like a brick shithouse especially with a 350 small block

[@genebullard6492]

What a waste of perfectly good square bodies!!!!!! :-(

[@rancedanko]

Whats the purpose of welding the cab to the bed

[@HODMEChannel]

So the bed doesn't rip off the frame.

[@slickrick882006]

Funny seeing all these people whining about the truck being derbied. GM built millions of these things over what was it 19 years? And a few killed by derby guys isn't gonna make a dent.

[@lilorbielilorbie2496]

POWERNATION Have you guys been taken off of the air.?

[@brandonwoodward68]

Where did the shifter come from

[@meengreen52]

That dodge hood in the back at 6:30

[@brodyclark3224]

Square body’s bend like limp noodles

[@denniskight5167]

As a derby driver, this was painful to watch.

[@rayshaffer1577]

So where is the next video on the derby truck

[@iankelly87]

Who was the promoter? In ontario 🇨🇦 my fav promoter is thrill show production

[@kenantoschjr8250]

Too badly destroyed these trucks that are getting harder and harder to find and there are high demand in my area

[@daniellibich1376]

As cases of full sized cars are even harder to find to smash up when square bodied GM pickups are harder to find as well. As tips from the sanctioning bodies of demolition derbies to ensure safety when most transmission builders had fortified the transmission to survive a heat when it would still run when the clutches are worn down to the backing plates.

[@DerbyNathan08]

Anyone that’s ever run derbies knows you don’t make as much as you put in

[@bradleyhouse3180]

Those beautiful square bodies!!!! Nooooo....

[@theminecraftgamingchannel1532]

What ever happened to the low buck bronco

[@tmooner34]

Minimal investment 🤣🤣🤣

[@offroad4x4nhlife45]

i've running an building derby cars/trucks for 20 yrs. i could teach you a few things.

[@OldGriz708]

Rookie😅 I've been at it since '78.... Lol

[@offroad4x4nhlife45]

@@OldGriz708 😂🤟

[@Dreamspeed01]

Awesome

[@KylerKreates]

When you're welding you should put on a mask and wear proper protective equipment and those sunglasses are not OSHA approved

[@teamunderbuiltracing9340]

I've done derbies for a few years and for a bone stock truck heat that black and orange truck was cheated I can tell you that right now

[@jamezz3536]

"Whose the dumbest mf in the trailer park" challenge

[@Coalblack79k10]

What a waste I’d love to have had all them parts that tail gate looked great they should’ve just blown that ford up and let the crowd cheer over it and save the square body’s

[@atomicbogator6799]

Nah save them all

[@trussell70385]

What a waste of a good square body

[@arthurmorgan7667]

My hole life I’ve done derby’s

[@deeplyclosetedindividual]

i live my life one derby at a time

[@carguy1150]

That truck was to clean to be cut up. No one is putting a fully rebuilt trans that costs $$$$ to get destoryed in 15 mins in a derby truck. Ive seen alot to engine swaps at derbys but not many people dropping a few $$$$ on a rebuild bored over engine to have it blow a ring or melt down when the radiator blows because they always blow. Theres more money in that truck then most peoples daily drivers. Idk if they ever actually crashed it. But im thinking not and they pulled the engine and trans back out as soon as the camra was off because most derby cars cost between 500 to 1000 dollars

[@joeluglio6409]

The way they talk disturbs me but cool stuff