IKEA Office chair / MILLBERGET Swivel chair Assembly

[@veeras2020]

No rush. Each step clearly explained. No irritating music. Crystal clear voice that can end wars and let peace prevail. Thanks buddy

[@PPFlatPack]

Well said ;) Thank you for watching

[@stellapre2300]

A big thank you to you sir , I’m 18 years old and I did all this by myself . Although I lost my glasses I was able to manage with your video. Thank you God bless you

[@PPFlatPack]

Well done. Glad it worked for you. Thank you for watching

[@rah62]

Exactly in the same order as the installation manual! I read the step in the manual and then watched the corresponding step on the video. Seeing someone do it was a perfect accompaniment to the manual.

[@PPFlatPack]

Thank you for watching

[@Saratebarki]

You are so good at step by step instructions i was able to assemble it with no issues. My first attempt in doing anything like this and thanks to you i accomplished it.

[@PPFlatPack]

Thank you for watching

[@annabelspresence2443]

I got mine today, not knowing what to do almost frustrated me until I saw your video. THANK YOU. I assembled mine successfully

[@PPFlatPack]

Thank you for watching :)

[@kiannanerissa606]

Amazing! Your tutorial was easy to follow - I was able to do this - First attempt - less than 15minutes - THANK YOU!

[@PPFlatPack]

Thank you for watching

[@seanyzy9081]

Legend who knows what we need. Clear and easy

[@kdkarim2010]

your instruction is clear an easy to follow and has helped me with my build. Following your instructions has made my job effortless. I thank you.

[@PPFlatPack]

Thank you for watching

[@YahBoiiRoy]

I have this chair and its tilt back function has not worked for weeks. This video helped me fix that problem. thank you.

[@PPFlatPack]

Thank you for watching

[@pedalezurban]

Usually, when I see quality, I leave a comment. I don't know you, I didn't see any other videos, but man, this was one good tutorial for me, I will start to assemble the chair right after sending this comment. Thank you so much, cheers!

[@PPFlatPack]

Right time right place ;)

[@pencil6820]

As an 11 year-old, assembling this chair was surprisingly easy.

[@PPFlatPack]

That's great. Glad you make it.

[@cosmoz6038]

@Amongcraft SMP probably, time flies

[@spicerc1244]

If anybody is having trouble at 5:00-like I was. I had luck unscrewing completely the back screws of the armrest on both sides (these: 3:36) and then going back to the backrest. Here's the hard part. To get those armrest screws back in, you have to push down from the top of the chair, with quite a lot of force unfortunately, to line up the holes. Not a great experience.

[@ASLVLOG_]

Thank you bro, I have just finished my chair by watching your video👍

[@Kheyoflights]

Good tips and advises for the building especially for the back part. MILLBERGET is my next purchase! sure!

[@DavidThomas658]

Brilliant, Clear Instructions. Thank you.

[@PPFlatPack]

Thank you for watching

[@moseyaq898]

I slept while watching this video... your voice is a natural ASMR. No homo

[@mr.n476]

I feel you 😂👌

[@nicolasgeorges3776]

Thank you very much for your video ! it was really helpful comparing to ununderstandable notice !

[@rkobewt]

I could listen to your narration alllll day

[@Snapback1881]

How 2 tilt?

[@voyager4328]

Nice video man, I've been checking out this chair, it look's Comfortable and Stylish. Thank you.

[@PPFlatPack]

Thank you for watching

[@RyeBreadSucks]

It's terrible

[@445Matty]

@@RyeBreadSucks Is it your own experience or just trolling? Please elaborate.

[@RyeBreadSucks]

@@445Matty not trolling. I find it very uncomfortable

[@pinkypie9870]

@@RyeBreadSucks its not

[@benedikt3643]

Thank you for this Nice Video I just finished mine.

[@PPFlatPack]

Thank you for watching

[@e.muffin1802]

I assembled mine today. I watched this onky afterwards. 😂 Surprisingly easy. However, the chair is wobbly and I haven't figured out how to recline it.

[@kishorprakash5114]

Great video. Can also make one for DISASSEMBLE a chair like this. It's really difficult to do that when moving.

[@carltonseymour869]

Just made my daughter's chair after looking at this video. Thank You PP FlatPack.

[@PPFlatPack]

Thank you for watching :)

[@kerstboom20000]

nice work well done thanks

[@sonyasyeda]

I think you missed a very important part about how to use the tilting option on this chair.

[@imanrachman9044]

How to Lean Back. ? mine seems seems to have an issue with this function ... just bought it today

[@sarveshayre3281]

@2:00 - the 4 holes are not aligning with the plate. What do i do? Should i call their complains department?

[@LuisFernando-lj5tw]

If you push the leaver to put the chair angled back and then can you lock the leaver to lock the chair angles back?

[@marinabernard3912]

I have just put this chair together but the gas lift doesn't seem to be working, any ideas to resolve this?

[@StyIoire]

Is there a way to have it permanently tilted back?

[@awadelrahman]

Thx, it was perfect, I lost my instructions book, this video helped me

[@PPFlatPack]

Thank you for watching

[@ahmednasser7414]

is it comfortable for your back ?

[@awadelrahman]

@@ahmednasser7414 Well, actually it is 2 months I am using it now. I think it is ok compared to its price. I bought it for the lockdown period, I feel my chair in office is more comfortable though.

[@ahmednasser7414]

@@awadelrahman thanks for your review .

[@jeanquadraculbert]

Wednesday, October 16, 2019. Thanks for your tutorial on assembling this chair.

[@PPFlatPack]

Thank you for watching :)

[@jakubb2132]

Can you make it recline and make the chair stay reclined like that or is that not even possible on this chair??

[@qsimmons9263]

Rik Hynes I thought this would be easy until you said drill a hole in the base plate.

[@angelaguilera600]

@Rik Hughes can I know?? Please

[@Saif-in1iq]

What nails do u use for the base cuz I dont know where to get them from

[@Sir21Goals]

Man, it’s funny I bought the same products on your channel the Bekant desk and this chair wow. Thanks brother.

[@alfares_]

what do you think about the chair, because I'm thinking to buy one.

[@Sir21Goals]

Alfares I just assembled it today and so far so good. Plus it’s very easy to assemble from someone who hates assembling stuff.

[@alfares_]

@@Sir21Goals oh nice, thanks for replying.

[@ДобрыйСамаритянин-х8т]

is the chair durable? my weight is 90 kg, I like to throw my feet on the table when working)) what is your weight? and how has the chair shown itself over the entire period of operation?

[@aishaal-hussaini4098]

yes i have the same chair and im 130 kg and ikea tested this chair on a 110 kg but my weight and the chair works fine

[@ДобрыйСамаритянин-х8т]

@@aishaal-hussaini4098, thank you, I already bought this chair

[@mrboomboom4077]

i lost my screw driver do you know its size of the screw i want to unscrew it thanks

[@omartriana9424]

Amazing video , great help!!

[@fones13]

IM TRYING TO REMOVE THE ARMS OF THE CHAIR NO SCREWDRIVER WORKS HOW DO I TAKE THEM OUT

[@thehegt]

Only up and down adjustment No tilt adjustment?

[@abduraman]

Could you measure max seat height? I want to confirm what is written on the site: 58 cm

[@sumitbabel5415]

Very well explained

[@thirupathi43]

Thanks really helpful.

[@varunbajaj9387]

Anyone has any idea, how to loosen up back of the chair? Mine is stiff.

[@BurnLikeAFlame]

WARNING: The plastic arm rests WILL BREAK eventually, it's just a matter of time and usage. They simply aren't made to support a chair that you can lean back and even rock a bit in like this. And because they hold the back to the bottom of the chair, once they break, they're useless. And IKEA does NOT provide replacements, not even a way to purchase them, outside of the relatively short warranty life. It's cheap for a reason, even if it won't be obvious for a while.

[@paulsmith4335]

same happened to mine. both arms cracked clean through both arm rests between the 2nd and 3rd screw holes. a very common problem with this chair which IKEA just told me "sorry, but you'd have to buy another as we don't sell spares for this chair". also the thin material on the arms will wear through in no time and be very unsightly.

[@pluto2252]

Major kimi raikkonen vibes coming out of this video

[@xulse]

What is the total width of the chair (including the armrest)

[@ZakiSp]

I bought this chair few months ago, it's not comfortable for a tall person

[@schmootheonly]

How tall are you

[@ZakiSp]

@@schmootheonly 6 ft

[@schmootheonly]

Actually I've had it a month now, it needs neck support for when I'm gaming 5 hours at a time or I get achey and need to slouch. I'm 5'8"

[@felixthefox100]

Great, that means it's comfortable for me

[@hammoz8579]

Not even comfortable for me as a short person

[@jxjakub]

My chair has a second stick on the bottom dont know whats it for tho

[@samhossain9724]

Is there any special screw driver required?

[@zuharathewanderer3427]

Nope. Everything is in the package. I did mine manually. Just using whatever the box provided. No powertools for me.

[@KedaiNasi]

good chair but sadly after using it for 5 years the star steel bends and the middle steel (that goes through the hole through the star steel) completely touches the ground and scrapes it lol

[@matthewlewis7451]

Awesome cheers!!

[@redbean2705]

Please help!!! I recently learnt you can tilt this chair by pulling the lever out and adjusting the tilt tension knob. This worked, however, now it makes a sound whenever i lean back! I just got this. Anyone know how to fix it? It didnt make a sound before i pulled the lever out

[@aashutoshtaikar5087]

how did you do this I also wanted to adjust the tilt of the chair

[@redbean2705]

@@aashutoshtaikar5087 the gas lift lever that you use to adjust the height of the chair, if you pull it outwards, it grants you access to tye tilt mechanism. Next to that lever, there is a circular device where if you turn it, it adjusts the amount of tilt tension

[@mkelay43]

So good . Thanks a lot

[@ArtiSharma-ex5xo]

Super👏👏 Thank you

[@Shweta-bv3nc]

i do not own an electric screwdriver is it okay? or will i need to buy

[@PPFlatPack]

Not need for this one

[@adilmourjane1428]

hello! does anyone know how to keep it locked when I make it higher? every time I sit on it it keeps going down gradually. please help!

[@deliacastro469]

Adil Mourjane I have the same problem on mine.

[@RealHealthyGuidance]

you fat?

[@TheDragonballboy]

Thank you heaps :D

[@chriscignarella7535]

He do I g st the wheels to roll

[@NegativeNezzy]

my chair tilts forward, is this normal?

[@kidcopernicus]

You put the back on the wrong side, sounds like..

[@zuharathewanderer3427]

Mine is too.. i think maybe we lock the screw too tightly..

[@embarq12]

Looks like This is a well known issue with this chair. Wish I knew before I bought it

[@skrt1846]

So if you guys have problems with the tilt of this chair try to pull the lever to the right. if you want to lock it again push it to the Left

[@MuhammadMamoorKhan]

it doesn't work, the lock only locks it in one position, I want it locked while tilted, the mechanism doesn't allow that

[@johntony1670]

What do you mean?

[@skrt1846]

@@johntony1670 watch my video

[@aashutoshtaikar5087]

@@MuhammadMamoorKhan I agree the tilt of this chair is so weird that it is not at all comfortable to sit

[@Kezsora]

For anyone wondering, this chair is great. I've had one for 6 years now and apart from standard wear, it functions as good as the day I got it.

[@thatcheryoung3645]

How comfy is it for long term sitting?

[@ocoossss]

is it noisy

[@mrbadguy1946]

is this relax for 4-5 hours sitting on pc ?

[@linneah8211]

I mean depends on how you sit on it, I sit playing ps and Xbox for hours in it but I probably don't sit line you're actually supposed to xD

[@guava3070]

Linnea H its been a while but I see a lot of people having issues with this chair. How has it treated you?

[@Mr_consuela]

I'm 5'11 and my back is fine all day long I game for 6-8 hours straight but I have the older model called malkolm which is essentially the same chair just my tensioner is a hand crank not a twist but overall it's a good chair I had it since 2015 and still shows no sign of wear at all I'm 140lbs

[@universdeli]

hiç rahat değil uzak durun derim. 3 senedir kullanıyorum 1. sene sonunda gıcırdamaya başladı. Söküp wd-40 sıkacağım yarın. Ağırlıkla oturma yeri öne eğiliyor. Oturma minderi de aldım ama ağrı yapıyor uzun saatler oturmaya uygun değil. Arkaya yaslama mekanizması da düzgün çalışmıyor.

[@OmerFaruk-mq7vc]

@@universdeli Boy kaçtı?

[@maksimusengineering2050]

Народ, кто читает. У кресла есть 2 проблемы. Облазит кожзам... Лопаются подлокотники. Тут перетяжка и покупка усилителей для подлоктников из стали...

[@felixmeyer1972]

Sonntag 26.Dezember 2021

[@blackeagle2810]

thx you good man

[@medihabib2124]

Lontano kosta

[@TheDajoca]

Avoid the Millberget, as the newest versions of this chair are likely to have a forward tilt, making it less comfortable to sit on. Once you discover that yours has this issue, Ikea will not allow a replacement or a refund, as you've now assembled it..... TL:DR. They used to be great but the new versions are poor and Ikea's customer service is non existent.

[@ProjectSkrillexNL]

yeah like wtf im trying to lean back but I have to be like 250 pounds or something in order to do so. I'm 165 lbs and I cant lean back for shit, only when I try to push with my legs but that's just stupid. what a waste.

[@adriansrsa90]

ez

[@lws2199]

do not buy this chair, it is extremely uncomfortable, it doesnt have a good recline, makes your ass sweat for a long time sitting on it, and the arm rest hits the desk alot, it just wasnt for everyone

[@solace512]

How tall are you

[@MuhammadMamoorKhan]

I wish I read your comment before buying this useless thing

[@riddunyra4373]

very bad chair

[@ytscar]

squeaks like fucking shit!!!!!!!!!!!!!!!!!

[@maxfebr6128]

very bad chair