Preparing primer and painting your car. how to use wet bed and smart blend. diy paint auto body.

In this episode we cover the steps to preparing primer and painting your car. I also show how to be blend with a wet bed and how to do a smart blend! This episode is packed with a ton of information to help you do you own diy repair! If you find my content helpful like and share this video and subscribe. Thanks for watching!
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
600 grit sanding sponge
amzn.to/3n1tsrD
body line tool
amzn.to/2WTwNOg
mirka dustless sanding system
amzn.to/2XLLNOR
motor guard flexible blocks 3pack
amzn.to/3BLlW8a
flexible block motor guard
amzn.to/3n5fntk
hook and loop style 3inch wide adhesive tape
amzn.to/3BN7X1X
3m Performance paint gun
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
amzn.to/3scqGAf
Purchase the Sagola 3300 gto here! (affiliate link)
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
spraygunner.com/sagola-spray-...
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
SUPER THANKS BUTTON
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: [e-mail]
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
amzn.to/35ddyAf
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
how to save a bad paint job
• How to save a bad pain...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
How to save a bad paint job
• How to save a bad pain...
Song: Dipcrusher - Islands (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: • Dipcrusher - Islands (... ​ -----------------------------------------
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

[@michaelhensley8581]

Great explanation of what your doing and why your doing it. I'd say one of if not the top auto paint teachers on here and this is the first video of yours I've seen. Im attempting to fix some spots on my truck and this helped me a lot.

[@GarageNoise]

Awesome! Thanks so much I work hard to make simple easy to follow instructions. Appreciate your comment and support!

[@luckysakonta3724]

I truly liked the video. Much appreciated 👏

[@GarageNoise]

Awesome, thank you!

[@michaellynch4342]

Great job bro I love it blend well done

[@GarageNoise]

👊👍appreciate the support!

[@edr1234er]

Awesome job!! Thank u for sharing ur skill.

[@LakesideAutobody]

Great video GN - looks great

[@GarageNoise]

Thank's brother!

[@gregorybaldwin7039]

Great job

[@GarageNoise]

👊

[@mreightytwenty8709]

Love it.....Your the Man

[@johnochicago8457]

outstanding video!!!!!

[@Nissan300zxshowcar]

Great video!

[@garywright5939]

Great video the subtitles and arrows are very helpful Your very easy to follow along with Great teaching style 👍👍👍

[@GarageNoise]

Thank's happy to hear the video's are helpful . I'm working hard to bring the best content possible.

[@davidharrison8397]

Nice job 👍

[@mr.diyhowtopaintingwelding4479]

That pps performance gun is my go to

[@frankrodriguez1977]

Great video. Enjoyed the explanation of a wet bed because i wasn't sure but as always you did a fantastic job. Thanks

[@GarageNoise]

Thanks ! Happy to hear that you enjoyed it.

[@kennyhumphries100]

U don’t need to wet bed just makes it abit easier and a safety net really. Extra materials tho. think I have done a wetbed handful of times in 25 years of painting.. can achieve the same job with proper gun control/ tacking/ and flashing between coats.. great video and lovely job tho doesn’t really matter how u get there watever makes u feel most comfortable.

[@ashraz1709]

wow..seamless blend

[@GarageNoise]

Thank's!

[@stephanegarnier7002]

perfect job

[@drogba2k10]

So perfectly explained

[@GarageNoise]

Thank you

[@lucky55634]

Awesome :)

[@alivapereviews8057]

nice job i learned alot from this vids and yeah color match is perfect unlike napa the few times i got from them but sadly can't seem to find a O'reilly's that mixes paint

[@bobbydelamar606]

Dude this video is awesome! My 1989 CRX and my 1999 Prelude have those slight scratches from previous work. Guess they didn't use 320 grit. Also my hood got cracks and fish eyes after they painted. And it chipped easy.

[@GarageNoise]

Thank's brother, Yeah it pays not to get in a hurry and primer over deep scatches. Otherwise you get a poor repair.

[@abduljohn9895]

Thanks 😊

[@fotografiayretrato]

Me gusta esa pistola creó me la voy a regalar. Ese trabajo quedó nice

[@GarageNoise]

Thank you, I think you'll be happy with it

[@cmerighe2]

Superb

[@GarageNoise]

Appreciate it!

[@albaboss7995]

there is little shine on the new painted part. do you have a video where you show how to add shine to the painted part that looks like rest of the car?

[@frostytazz2909]

Do you recommend to wet bed an entire car respray of I am painting silver metallic or sealer will do?

[@SegaGenesis501]

So wet bed is just clear coat with reducer?

[@jonnyfowder]

Can you do a colour matching video !!!

[@kevin8435]

Great video! What brand flexible sanding block are you using? Thanks

[@GarageNoise]

Motor gaurd link is in description.

[@geoffreyrawlings9736]

Hi bought a new Sagola 3300 you featured on your channel seem to be getting lot of orange peel how can tell if clear is going on to thick orange peel doesnt seem appear until paint is dry.Great content Thanks

[@GarageNoise]

What air pressure are you spraying at? After you make you first pass take a look at the texture of the clear in the light. Dial you volume back a bit or up you air pressure up a bit. Not too much this should smooth it out.

[@cameronearnshaw2259]

How would this wet-bed method work with single stage acrylic enamel? I've got some minor tiger striping in one area I'd like to correct without repainting the whole panel.

[@GarageNoise]

It doesn't work like that with single stage . Single stage is made to spray wet like clear, a wet bed is mainly to eliminate mottling in a blend. Stiping in single stage can be caused by too much air pressure, inconsistent overlap on your passes or a gun that may have an inconsistent spray pattern maybe from a some dried paint in the cap or something. Sometimes on single stage if you spray a drop coat right after the last coat you can even out those metallics without effecting the finish but there's no real good way to get rid of tiger stipes after the paint job without re-painting. Sigle stage metallics can be Sometimes more difficult to spray that base metallics. Appreciate your comment hope this helps.

[@bobbydelamar606]

My Roadrunner needs alot of sanding. I'm using a DA with 80 grit but it takes awhile. Can a polisher be used, carefully of course?

[@GarageNoise]

Yes there are some other tools you can use, like a larger orbital sander with a coarse grit sand paper like 40 or 36. You want to be careful about heating the surface too much and warping the panel. A orbital sander is less likely to over heat metal like a rotary will. Thank's for watching!

[@husky1232]

Another great job my question is if you was using a 1k primer would you still finish standing with a 320 grit and then 600 grit and base coat thank you for the video stay safe

[@GarageNoise]

Yes, but 1k doesn't build up quite like 2k so you will sand thru the primer quickly. Thanks for the comment!

[@husky1232]

Thanks I went with a 400 grit and didn't cut through

[@johnniewashington7706]

Can you give me some advice on how to start sand and paint with no body work

[@GarageNoise]

I've got alot of video's on the topic check ou my playlist. Appreciate the support!

[@sergio7590]

i was taught to have a distance between the gun and whatever i’m spraying at around a hand distance what distance are you keeping at?

[@GarageNoise]

Typically around 4inches but it varies depending how fast I'm moving. A guideline is 4-6 , it's all about how the clear is laying down. Great questions thanks for watching!

[@arthuresclamada1805]

what is a wet bed? you have other video explaining it?

[@GarageNoise]

Yes I do check this out when I paint the truck I explain a wet bed kzbin.info/www/bejne/pJvIfZKkjql2h5I

[@madbazRC]

What’s the wet bed made of? Can’t seem to find what I need that’s similar here in the uk.

[@GarageNoise]

It's paint binder. Here's a similar product I've used before. From Amazon amzn.to/3pFnOPj

[@israel9294]

On the video you said binder is mixed two to one but on the can I saw it says one to one I’m confused

[@GarageNoise]

I watched the video not sure what your referring to? The reduction wether it's 2:1 or 1:1 depends on what brand binder your using. Folloe the technical data sheet. I am currently using speed coat color blender, I like to reduce that about 10%

[@bobbydelamar606]

So you sanded the clear that got blended? Then some new base coat got sprayed over that clear that was left? Then clear on top, is that right, and does that make it thick. Sorry just trying to understand.

[@GarageNoise]

I will be making another video soon that will be more detailed.

[@GarageNoise]

It need to be sanded with 1000 or 1500 about 4 inches past where you blend the clear.

[@bobbydelamar606]

@@GarageNoise Oh awesome, cant wait for that video. Its hard for me to understand sometimes.

[@gabstazx1000]

Can I use clear coat as a wet bed?

[@GarageNoise]

Absolutely not, base coat will react over clear coat

[@kseries20-24only]

@Garage Noise do you have a clear-base that you like when creating the wet bed? I'm not finding one at my local shop and hoping you could link one in Amazon or something 😁

[@GarageNoise]

I use nason binder, I'll try to fo d one and give you the link . What paint do you use?

[@kseries20-24only]

@@GarageNoise It's Martin Senour paint I'm able to get here from NAPA. Finish 1 is the clear/hardener/reducer

[@GarageNoise]

@@kseries20-24only Here is a blender link, resonable priced can be used as a wet bed. I've never used it but may give it a try. If you use it let me knowwhat you think. Much cheaper than the wet bed I use. amzn.to/3icdAPz

[@kseries20-24only]

@@GarageNoise Outstanding, I think I'll give it a try and let you know 😉 😀

[@kseries20-24only]

@Garage Noise the specifications say this blender is RTS (ready to spray). Would you anticipate I can buy this and throw in the gun to spray on sanded/prep'd areas without reducer?

[@adambrunell]

where do you purchase your base paint?

[@GarageNoise]

Oreillys it's nason xl .

[@adambrunell]

@@GarageNoise didn't know O'Reilly's sold automotive paint. I'll have to give them a call and see if they have the color I need. Ty

[@GarageNoise]

@@adambrunell Not all of them mix it but if they don't they can get it.

[@adambrunell]

@@GarageNoise thank you sir, I called this morning and got more info. I gotta head into one of the stores that does paint to get the mix.

[@mr.diyhowtopaintingwelding4479]

Why not powder guide coat

[@GarageNoise]

I've used it, just depends on what you prefer.

[@mr.diyhowtopaintingwelding4479]

@@GarageNoise i prefer no over spray on a car.no waiting on it to dry.just better in my opinion

[@KaiZen999XXX]

Serious question. Why not just mask up the bumper ?

[@GarageNoise]

Well I was concerned about the color match from fender to bumper. This is my wife's car (freebie) and I didn't have time to break it down and paint the complete bumper.

[@terryhall5811]

Would you like to donate any of your materials to me.

[@GarageNoise]

🤣I'm trying get get donations myself! Lol

[@wxretiretravel4823]

00 Okmulgee