Presslug - Make your own slugs!

My review: airghandi.de/en/presslug-make...
You can find more reviews about our shared hobby on my website: airghandi.de/en
My weapon care products: airghandi.de/en/gun-care-prod...
Slugs have become an absolute hype among air rifle shooters in the last 1-2 years! If you watch air rifle KZbin videos in English, you’ll often see shooters using slugs to shoot at long distances, sometimes over 100 yards.
I am gratefull for your support:
tipeee.com/airghandi
paypal.me/AirGhandiSupporter
Thank you! :-)
You can find my content here:
airghandi.de/en
/ airghandiworld
/ airghandi_world
BE AWARE: Please comply with the legal requirements and restrictions of your country.

[@AirGhandiWorld]

My shop for rifle scopes, silencers and accessories: www.jabolo.de/en

[@rickdacosta1863]

I'm interested in purchasing pellet molds

[@lestergillis8171]

Any dies/jigs for .20 caliber/5mm pellets ? I have a BENJAMIN 5mm air rifle, and an older SHERIDAN 5mm air pistol. Just wondering if anything is available for them ?🤔

[@dhinriasmawan-ne6bv]

Really interested,how much fir the price

[@AmazingChinaToday]

After watching Matt Dauber's video on the design and evolution of the "Javelin" 2nd generation slugs, it's clear there's more to creating slugs than just squeezing them out. They ran ballistic and firing tests throughout the process and now have slugs that essentially fit into the same hole at 40 meters. Making them at home seems cool, but if your gun prefers a .05 mm difference in the slug dimensions, you're out of luck on the money sunk into the slug press. But it seems they do sell the slugs alone on the website, so you can try the slugs first in your gun, before investing in the press.

[@catherineharris4746]

Good luck finding this press😂👍

[@heathhalfhill6401]

Good luck affording this press. 1.6K and that is just the press. You will need another 1.9K for a decent setup....3.5K$ for slugs and or pellets at home...I'm good.

[@catherineharris4746]

@@heathhalfhill6401 100% FACTS👍 I was searching around to find this thing with no luck, then they said that I could order it for that outrageous price WITHOUT any dies at all and I would have to have someone make dies for me😵 I ended up ordering a nice press from Corbin and this thing is sweet!👏

[@johnfreed7733]

Certainly appreciate English being dubbed over your presentation. Thank You.

[@penfold357007]

Metric, love it so much! Thank you for your video.

[@phirozeirani8357]

Love your videos! Any chance you could do a grouping video using these slugs in various airguns? There’s not much about the accuracy results of slugs from this press anywhere..

[@ngamshim]

Thanks for sharing the video 👍😊

[@anthugny6712]

Love your videos That press is bad ass

[@DewaSenapanIndonesia]

amazing print slug with a very cool tool, greetings bertan from Indonesia🙏🙏🇮🇩🇮🇩

[@pascalzorenc1423]

Great video.

[@ikoknyphausen198]

Super. Very informative. Vielen Dank.

[@FDTSafety]

I always say, if you are going to market slug making equipment, provide slugs you produce, so we can see how they shoot. Otherwise, it is an EXPENSIVE gamble.

[@redleaderone8429]

2 g for a press

[@TheHerald45]

Looks nice but i believe it costs 2200 for a the complete set without the leadwire, for this price you can buy 50000 knock-outs. Looks to me that money is better spent on a Edgun

[@AirGhandiWorld]

Thanks for your visit and your comment :) Wish you a great week!

[@moaviahassankhan181]

Bro humy jhy machine 🇵🇰🇵🇰

[@dadtv9872]

Is that $2,200.00 US Cash????

[@jamesboyce9186]

@@dadtv9872 yeah E1,899 its nutty

[@TheHerald45]

​ no this would be 2200 euro

[@PauloCesar-nb9xk]

How Make your own slugs? Simple: buy machines and tools that make them!" You are a genius! How did I not think of this before?

[@AboLailaAlmohalhil]

Been testing it for more than a month. Tried every weight with pure lead and many different alloys. I got Zero accuracy. nothing shoots well. I contacted them several times, but I got no answer at all. DO NOT waste your money.

[@user-nq3gg3ib7d]

من فضلك.. كيف يمكنني صناعة سبيكة الرصاص المناسبه له

[@nsboost]

This really means nothing. I made a 32 grain .250 slug in my Corbin press and die. It was TERRIBLE in my rifle at 940 fps. But I turned the rifle up and experimented. At 975fps is sub moad at 100y. Air gun accuracy is a fickle b**ch. so much comes into play…. That just because you pressed some slugs out and they didn’t shoot, doesn’t mean the slugs are bad. FYI there are far cheaper options on the market.. and been on the market much longer

[@AboLailaAlmohalhil]

@@nsboost I have been casting and swaging for more than 7 years. And as I said above, I tried every weight with every tuning possible. You are talking about Corbin. Well, guess what, I have other dies that make outstanding slugs. Go ahead and buy one of these and prove me wrong.

[@nsboost]

@@AboLailaAlmohalhil I’m not spending $2000usd on a press that does the same thing as other companies $800-$1400 presses lol. This company is flat out of their mind.

[@AboLailaAlmohalhil]

@@nsboost I wish it does the same thing. But, actually it does not.

[@jimstewart5008]

So awesome, I guess I will be going further into the rabbit hole!

[@AirGhandiWorld]

Thanks a lot mate!

[@jimstewart5008]

@@AirGhandiWorld no problem glad you have made the effort to do these video's in English, I do appreciate it!

[@AirGhandiWorld]

@@jimstewart5008 Thanks a lot! :) There will come much more videos in the future... have lots of rifles and cool stuff here to film ;)

[@reignedelarama3316]

how to avail this machine

[@spunkeybojangle]

First one found in English dub. Thank for the info Bossman

[@GeKo1966]

I can´t say it enough times, but you produce great vids, just like @airbuks, for us airgun shooters here in Europe. Always very detailed and relaxed. Would really like to make my own slugs, but I have seen the price for the Presslug kit, and it is way to expensive for my budget. If I had I would buy, since it is also made in the EU (CZ) and not some China crap....I have guns from .177 up to 30, and on my Impact have from .177 to 25, so you can see it would be very costly to finance it. But should I get the budget for it, that is the kit I would buy, and would not compromise on the craftmanship and great quality of the product. If I cannot afford it, then I would not invest in lesser quality!

[@motorgearhead]

This appears to be a very high quality press. Swaged slugs tend to higher quality through uniform dimensions and weight, generally speaking. However, I cast my own 30 caliber air rifle slugs and through experience and good quality control (grouping by weight) I can get accuracy results that rival or maybe even exceed a swaged projectile. I cast then resize each slug by running it through a reloading press with a sizing die. The sizing die decreases over diameter projectiles to a uniform size. I then weight sort the slugs into groups. Each group will weigh .5 grains of each other (for slugs over 100 grain weight). Everything I generally shoot is well over 100 grns. Note: you must lube the slugs prior to sizing. I use a common diy case lube for center fire case resizing. It’s liquid lanolin and isopropyl alcohol. (4:1 isopropyl to lanolin). Anyway you end up with a fairly uniform cast projectile that can be very accurate at 100 yards. Here is a video of my cast 120 grain .308 slugs Vs Nielsen specialty ammo 120 grain hp slugs shooting at 100 yds. I am shooting a non-regulated but tethered .308 Air Force Texan air rifle. NSA makes great slugs! However, on this day I shot my own cast wheel weight slugs a little better. My 5 shot group was 1.08 MOA @ 100 yards. That’s a group smaller than a golfball in outside weather conditions at 100 yds. .30 Cal Air Gun Slugs - My Cast Vs NSA Slugs at 100 yds - Velocities, Power, Groups.... kzbin.info/www/bejne/habblWN7osSZapY

[@amunraa1]

Hi Andi, your video is great and very simple explanied, i have only a question i had a look at the prices and there are WOOOOOW for the cutter and the press € 2200. I shot 6000 to 8000 slugs a year and if calculated right i can shot 240 tins each to 200slugs that is 48000 slugs. what do think? is it a good investment? Best regards from Austria

[@melafricayt4212]

I like that, nice one how much thanks

[@SnipeLoisirsTestsCustoms]

Hi, were you able to test your homemade slugs? Thanks

[@redgum1340]

Looks quite nice. What is the cost of the set-up? Hope you answer my question.

[@motorgearhead]

Swagging slugs is a very precise method of manufacturing slugs. But it generally is expensive to get started. I cast slugs for 30 caliber air rifle and 22, 38, 9mm, 44 & 45 caliber slugs for firearms. Casting is much more economical than swaging. However it is more dangerous as you are handling molten lead and fumes produced are hazardous. Equipment associated with casting bullets will include a lead pot/furnace. I use a Lee lead pot with bottom pour design. Bottom pour means you place the mold under the pot and lift a valve handle to dispense the molten lead into the mold. A Lee lead pot will cost ~$100 (USA). I purchase my big bore mold from Lee for $30-100 depending the number of cavities and if handles are included or must be purchased separately. For small air gun calibers I use NOE bullet molds. Their molds generally run about $150-180 and will require handles ($30). NOE produce limited quantities of molds and popular air rifle caliber molds are often out of stock. There are other companies as well. All that said, casting is relatively easy to learn as there are many videos online that will show you how. You do need a space that is well ventilated. I do my casting outside under a gazebo and also use a fan to maintain safe air flow. You could also setup in a garage or storage building if you have the space available. Anyway, the point is you can make your own slugs by casting and get started for under $300. I also size and weight sort my slugs if being shot a distance beyond 50 yds. I use pure lead and also scrap wheel weight lead. Pure lead is best for hunting as even solid (non hollow point) slugs will mushroom at velocities above 750-800 fps. Wheel weight lead will also mushroom but not as much as it is a harder lead but still viable for use in air rifles. If you need to penetrate heavy bone, wheel weight lead might be a better option as it will deform less and punch through. Pure lead just barely out performs wheel weight lead when shooting at 100 yds (accuracy). I have several videos testing pure lead and wheel weight lead out to 200 yds shooting a .308 AirForce Texan. Feel free to check it out. I almost exclusively shoot my own cast bullets out of my Texan 308 air rifle. And I use cast wheel weight lead about 90% of the time. If unfamiliar with the Texan .308 if fires a .309 caliber slug at weights up to 180 grains. The most energy I’ve seen it produce and have on video is 291 FPE using a pure lead 173 grain projectile. I was comparing the rifle’s energy to a 4” barrel 38 spl revolver. Link below: 38 Special Vs 30 Cal AirRifle - can air compete? kzbin.info/www/bejne/qaPFmHdqpblmm5I

[@xMrjamjam]

Thank you so much! Ive been looking for a .22 pellet mold thats affordable for years now and these noe guys do both hunting and target pellet molds. You are a legend

[@motorgearhead]

@@xMrjamjam - thanks for the kind words. Glad NOE had what you were looking for. Hopefully your rifle will like the mold. Unfortunately, I’ve found my rifles don’t like about 50% of the molds I’ve bought. I guess I need to add that critique is based on performance at 100 yards. If shooting closer distances, you may have a higher success rate with mold choice.

[@chrispriestley882]

Sorry, a bit late to the party here but do these slugs fit exactly in the L2 magazine or will they drop out like all the rest?

[@johnbeavis1249]

we need to see how they shoot and group. will the press cope with tin./zinc?

[@michaelsadroz45883]

Ein sehr Interessantes Gerät und für die Herstellung von Vollgeschossen sehr gut geeignet. @AirGhandi - Kannst du die funktion der Matrize genauer zeigen? Insbesondere wo das überschüssige Blei heraus kommt.

[@atonlu5832]

Hi, amazing video!!! Can I have the size of the slug, like a CAD/blueprint? Thanks!!

[@omorbangla640]

If you could make target compression that will be best for us to compare the value

[@toktomikanikal]

The required volume is 5.5 mm

[@tunerrestorations]

Is there a version of this video with the original audio?

[@patriciaachkarian9742]

Hola soy de argentina y me interesa la presslug en calibre 5.5 donde se puedo comprar y a qué precio

[@sniperecek-ecek6801]

Best 👍👍

[@gioanbuzzo3472]

The presslug is made in an excellent way, what puzzles me is that I have never seen anyone use the slugs produced with this press, how are they on target????

[@derrickbrooks9396]

Thanks buddy

[@AirGhandiWorld]

Thanks for watching!!

[@derrickbrooks9396]

What is the price

[@AirGhandiWorld]

@@derrickbrooks9396 1799

[@filipkovacec5759]

Been looking at it for few days and saw your video today. I also have L2 450mm in 0.25 cal. and my gun prefers ZAN 35 grain above others. This tool "Presslug" looks amazing but it also costs a lot and before buying such a tool I would like to be able to buy test slugs (like few of each possible that this presslug makes) and to test them before committing to something that perhaps some of the shelf product beats. Love the video, love the tool but please pass the word and give us the possibility to test em!

[@AirGhandiWorld]

Thanks a lot Filip for your visit and your comment! Perhaps Presslug themselv could do that. I am just a reviewer, i don´t sell these Presslug or the Slugs itself.

[@filipkovacec5759]

@@AirGhandiWorld yes I know ofc it was just a suggestion to them as a producer it could help with sales. Like 10 pices of each slug that your press can make in the caliber you take. Like 100 or something slugs to test like H&N has. Thank you love your channel!

[@AirGhandiWorld]

@@filipkovacec5759 Thanks a lot! I am in conversation since a few days with the producer. I will ask him and give him your idea! Wish you all the best! Best regards! Andi

[@mfs5493]

Please learn the difference between comfortable (körperliches Wohlsein) and convenient (vorteilhaft in der Handhabung)

[@Johnija]

Any test of slugs on range??

[@dougkapounek9024]

Hi, where does one buy the press in Canada, I'm Czech but now live in Canada and own 2 9mm CZ and a 22 LR also CZ but looking to get into air PCP but really like the idea of making my own

[@toktomikanikal]

How can I buy and deliver to Egypt and what is the price?

[@carvalhoantonio2004]

Very nice, where I can buy this machine, I live in Brazil?

[@Tajikistan_Hunter.]

good evening dear, please tell me from where I can order this press

[@theyorkshirelad.]

have you tryed these slugs in fx impacts how do they group ect

[@pemudatersesatxgoblokers1240]

is there a link to buy the slug press, friends?

[@airgunschannel598]

Faz envio para o Brasil ? E qual valor ?

[@user-nq3gg3ib7d]

ماهي المواد التي تضاف الى الرصاص لصنع سبيكة مناسبه له؟

[@Sertao2013]

1,813.00 seems to be a lot of money just for a press and 402.00 for the die , that 2,215.00 . That is just not feasible for most people . Can you make something less expensive ? Maybe something in the 500.00 dollar range for both ?

[@turkish__power]

where can i buy this pattern (bu kalıbı nereden satın alabilirim)

[@hvymax]

Do they make those in.720" for American Slugs?

[@andersonvalerio9802]

Where can I buy this mold friend.

[@purwantopurwanto6613]

Ready for .177 ?

[@dr.lifecoach5116]

is it possible to make for air pistol.

[@chwmwijamatia3659]

Waoo that's so awesome, can I know the price please

[@patriotadventure]

is it cheaper to make your own?

[@josephraape7849]

How much is the tool cost?

[@ShayanQuanta]

what size lead wire we should use for 5.52mm slug ?

[@AirGhandiWorld]

You can use the 5,5mm Lead!

[@themulesheriff3009]

I’m looking to buy this setup. Website shows die size 8.92mm and 9.09mm which is .358 Will the .358 be to big for my .357 western rattler?

[@themulesheriff3009]

Also what size wire do I need for the .357?

[@user-zr8eo9gh7l]

I want to purchase a set product, what should I do?

[@angelopipaaraujo6069]

Where can I buy a machine like this?

[@user-qm2uh6gb7t]

Hi , who makes such a device ? Where can I buy ? I am from Russia and I really want to have such a device under 7.62 for manufacturing on leshiy 2

[@abbansel1956]

Where am I can I order it?

[@jamesbowskill362]

Its a lot of FAFFING about when you can sit & order slugs on-line at very competitive prices & free delivery. SO, what the point ?

[@jokitembak]

Mantap ini, Harga berapa ya untuk alat ini ?

[@jlyle51]

Turn volume up please.

[@hectorsaidmata6535]

I am interested in this press to make my own ojibas or Pellets, can you give me purchase information

[@copyandpaste6485]

How much it cost?

[@JoseSantos-jd3dn]

Hi. For now what I discover, with .25 fx liners don´t buy the .251 dye. It will left the barrel full with lead. I only use silicone spray to lube them. Dont know if is there a solution for that, with special lubricant or some thing. Now I´m trying .249.6 dye and I hope see groups. For now 54gr is to forget too, don´t group. I´m not a hunter, just wanna smack 230mm disc grinder at 450 meters with consistency. For now altaros in .25 and .22 hn 30gr is the only slugs that I approve for m3. If is there anyone with ideas, or experience swaging please share.

[@rickdacosta1863]

where could I purchase the slug molds

[@AirGhandiWorld]

Please contact Francisco at Wolfiek Group in Spain for it!

[@donnajeancapalad215]

how to order presslug? from philippines?

[@Ak-pl1fs]

How much cost of thise pellets mold of slug please reply me

[@jesusoftheapes]

can you make .45 caliber slugs with this system ?

[@AirGhandiWorld]

I don´t know a insert in that caliber for the Presslug. I am sorry :(

[@jesusoftheapes]

@@AirGhandiWorld Well is there a way to make 457 caliber slugs on the market that you know about or would we all be stuck with casting?

[@dadtv9872]

The videos were simplified and very well explained for me I totally understand everything but the only thing I can understand is can you convert that into US dollars and if I really send you this money to Russia the way things are right now all fucked off in the world am I going to get my product I pay for it almost seems like it's pretty expensive but I'd like to know what it would be in American dollars thanks man

[@nenipurwanti1673]

How much price ?

[@bubutpcpstore]

How can I buy it? can it be sent to Indonesia?

[@TeslaSpain]

Cool tool but super expensive

[@luizitotinoco9830]

Preciso adiqui uma prensa dessa como fasso?

[@subralhadid1743]

how to buy?

[@polingal8524]

How much the machine sir

[@abdullahjan3043]

Price????

[@migueljimenez5249]

Donde puedo comprar una de esas pero calibre 6.35 mm

[@suryantoanto2855]

Salam kenal dari Indonesia gimana saya bisa mendapatkan cetakan slugs cal.177 mohon bantuannya

[@danilomora6061]

Soy de República Dominicana cómo puedo comprar un molde 5.5 para calibre 22

[@rejiecasalmer9655]

How much your press SLUG

[@fouadhameddine1433]

bonjour; svp le prix de cette machine.

[@thelordsmarksman7377]

Are they going to be available in the U.S. ?

[@AirGhandiWorld]

Yes, you can order it at www.edgun.shop ! They will ship to US

[@thelordsmarksman7377]

@@AirGhandiWorld thank you sir

[@AirGhandiWorld]

@@thelordsmarksman7377 you are welcome!

[@jaianesamarasamara2662]

@@AirGhandiWorld envia para o brasil tambem ?

[@ShayanQuanta]

where to buy this Lead?

[@AirGhandiWorld]

Check out here: www.edgunleshiy.shop/

[@EmmanuelDiazOliva]

Quiero una donde y como la puedo conseguir 😊

[@MrPyroMaster]

Soooo expensive! 😄 No way!

[@mohammadaliali606]

How much salug machine

[@blackspider3404]

Cek harga dan link prmbelianya..???

[@dewadesuta7041]

Cara belinya bagaimana ?

[@jorgeluisflorianvillalobos6012]

Dónde puedo conseguir la máquina

[@ballisticrattv3817]

TO EXPENSIVE WITH WHAT IS AVAILABLE ON THE MARKET..RATHER BUY THE SLUGS TBH

[@alandmontye4745]

Envia para o Brasil ?

[@sjohn3969]

Sir can you send this press machine for sale sir

[@munshimilan3018]

can i got it Bangladesh?

[@__-pl3jg]

Can I use copper wire instead? I want to make copper slugs😀!

[@kwkstar]

I was a toolmaker for 35 years, I bet the answer would be no, copper is quite a bit harder than led!

[@sudihartoyo7874]

Apakah ini bisa dibeli?

[@amransportseniperbugis6792]

Cek harga cetakannya

[@redleaderone8429]

really pricey tools wow not cheap

[@letrerosokdiaz5301]

Hola madas a chile la presa