Tubliss + Mousse + Plews Tough One Extreme Tyre = Moobliss (Ultimate Hard Enduro Setup)

Рет қаралды 6,591

Күн бұрын

Пікірлер: 38

@antonyherring8446 5 ай бұрын

Been running this set up for about 12 months and it's hands down the best of all options. Bloody good tutorial on how to install with some very important info that everyone should know... couple of steps apply to any bike related installs.

@abpob6052 5 ай бұрын

That makes sense using the tubliss as a rim lock. Lube the tubliss system often and change the tubliss tube at least once per year to eliminate tubliss failures

@PrimalEnduro 5 ай бұрын

I've been using the same high pressure tube for years! Use the grease that's linked in the description, take care with rim and tape prep and they last forever! They are cheap enough to replace though...

@jmothers 5 ай бұрын

Awesome tutorial, can I substitute whiskey for beer?

@PrimalEnduro 5 ай бұрын

We don't judge!

@nseric1233 5 ай бұрын

The top extreme enduro guys like billy bolt are running 6-8 rim locks with a drilled small soft mousse. I bet it works similar to this but is a nightmare to install.

@PrimalEnduro 5 ай бұрын

Plus this will hold air if you desire!

@PrimalEnduro 5 ай бұрын

Goes great with everything!

@louisdoucet1498 5 ай бұрын

Nice to see you back

@PrimalEnduro 5 ай бұрын

Good to hear from you my friend! Have you been riding?

@louisdoucet1498 5 ай бұрын

@@PrimalEnduro Haven't stopped sold 200 bought 300 and a 200 factory trials all betas

@PrimalEnduro 5 ай бұрын

@@louisdoucet1498 My entire group now has trials bikes, we ride them every Wednesday, and Enduro bikes on Sunday! You should join us.

@louisdoucet1498 5 ай бұрын

maybe we can hookup

@federicobattistin8253 5 ай бұрын

Hey nice idea! I thought the same for my rally motorbike, do you think the high temperatures will create some problems to the mousse for the fact that is not lubed completely like always? Grate video 👍

@PrimalEnduro 5 ай бұрын

No reason you couldn't lube it completely. In fact I do put lube in via the low pressure valve after install. It spreads itself and is easy to add more later!

@NorthWestEnduro 5 ай бұрын

The other benefit of this set up is that the tubliss liner will stop water getting inside the tyre and washing out the lube.

@PrimalEnduro 5 ай бұрын

Never thought of that, but you are correct!

@VikVik-je8go 5 ай бұрын

Good for weekend, but not for race, 2 rim locks is OK for hardenduro

@PrimalEnduro 5 ай бұрын

it's good for a race if you prep the Tubliss correctly. Usually tubliss failure is from friction on the high pressure tube.

@Jrod_FPV 5 ай бұрын

What are your quick thoughts on the ProTec? I'm too impatient to wait for the video 🤣

@PrimalEnduro 5 ай бұрын

Don’t have it yet! Looking forward to trying it

@Jrod_FPV 5 ай бұрын

@@PrimalEnduro mine arrived yesterday. Planning to install in the next couple weeks.

@PrimalEnduro 5 ай бұрын

@@Jrod_FPV Looking forward to your assessment!

@adamh3272 5 ай бұрын

Heineken......always a good choice!🍻

@mateuszhojenski6154 4 күн бұрын

Hi, what about rabiconda video?😃

@andrewgraham8561 5 ай бұрын

You forgot the link for the dielectric silicone grease.

@PrimalEnduro 5 ай бұрын

www.amazon.com/Jet-Lube-73550-Dielectric-Cartridge-Translucent/dp/B007IBAC9S/ref=sr_1_2?crid=23X7OODANP4C2&dib=eyJ2IjoiMSJ9.g65Cg3pY5FDDpmiV66jlIBBv8E97O1ZVT3I4mwSd5NxrunPWvJ9dds1DS42h5NcqQuDlhAuxW1wXUvB1OZH5FNBwoVeqUTt7QU4zvWKQIh4l4SCqhw3wsH8AhmJA_ViWKCSBlW-EPcxA_I_OfxMAPjtnFiuRDjcXlvF-V3XPRD620K-E48Si3MiO7EoLSM3yPbIt8XZkqrRKoA94OsnMGkQHZc-xfhq17trm4ejLduU.pDehnQqeL2TqVuNNTgNCbSUNaFpSu3HxZLLApQlLzSI&dib_tag=se&keywords=jet+lube+silicone+compound+dm&qid=1717896283&sprefix=jet+lube%2Caps%2C73&sr=8-2