Programming the PAC SWI-PS for Infiniti G35

[@seansadventures-flyingtrav7901]

Thank you!!!! Your video is the only one that made programming sense!! I got my car set up ...Thanks!!

[@Wrathernaut]

@25dkolta That's correct. It creates a "Y" with the bottom connecting to the PAC's white wire and the top going through the resistors to the red and green wires.

[@Wrathernaut]

Yes, both resistors get soldered to the white wire. The resistors get soldered to the red/green wires on the vehicle's harness.

[@Wrathernaut]

Yes, it'll work with the Z1, but the Z1 doesn't support the voice input, so the actual button and skip sequence will be slightly different.

[@25dkolta]

in the instructions it said connect the green wire off of the vehicle factory harness (pin 23) to 150 ohm resistor, and the red wire (pin 22) to a 47 ohm resistor then connect the ends of those resistors to the white wire off of the pac unit. This is what i understood does this sound right ?

[@Wrathernaut]

You didn't miss anything, it was just me moving the camera into a position I could hold while pushing the button.

[@Wrathernaut]

It's not hard to hook up, but you do have to solder in a couple of resistors to the signal wires. The metra wiring harness has nothing to do with the steering wheel adapter, as it's on a separate harness from the ones the metra plugs into.

[@xmdude626]

nice video. Just installed one on my GS300

[@Dewtweedy]

Where does the green wire coming out of the PAC go to on the car?

[@Cclam1]

trying to decide if this is worth buying how hard is it to hook up? i have ordered the metra wiring harness

[@TheJohandy01]

hey what wires do i need to solder ? do i only used the red black and white ?

[@TheJohandy01]

so the red with the fuse does not get a get a resister or the black only the white gets 2 and from there to the car factory harness green and the red ? that all i need to do just 2 resisters

[@Brianisonfire]

I have a 2006 Nissan 350z. I bought the PAC SWI-JACK STEERING WHEEL CONTROL FOR JVC KW-XR810. Is it basically the same thing? Do you need to take the steering wheel out?

[@Dewtweedy]

Can you wire this to a harness?

[@ElBeeDee03]

thank you!

[@DavidEnvy]

Why did i t cut out @ :52? This is where im having an issue.

[@the02chevyman]

hey great video. did you have to wire resistors to the adapter? from what I read you have to? please help thank you

[@Wrathernaut]

Yes, it needs resistors; one on each of the signal wires in this car, but since this adapter and the superior ASWC-1 are so similar in price, I don't recommend using it anymore. The ASWC-1 does not need the resistors.

[@dabillionaire90z]

I lost power to my navigation when I put after market screen in . how could I get that back ? or can u tell me what wire powers the navigation in the harness

[@Wrathernaut]

+dabillionaire90z The entire navigation system is on different harnesses. The only way you'd lose power after an aftermarket install is a blown fuse, a loose harness, or a broken wire. You will lose the voice from the factory navigation, since the aftermarket radio doesn't have a switched aux input that will work, but every other navigation function is completely independent of the factory radio.

[@dabillionaire90z]

ok, so it's completely independent, someone told me that a yellow wire powers the navigation and I would just have to put power to it , can you post a video of my problem

[@Wrathernaut]

+dabillionaire90z Yeah, it gets power on a yellow wire, but not the same wire that goes to the factory radio, there's a separate harness with a separate power wire going to the screen.

[@ThemanWhitTwoGuns]

how d you skip a program

[@kemesha1278]

would you be willing to explain this process, somehow....

[@brettr1224]

Kemesha Keller If you have sound on, it's explained.

[@kemesha1278]

would you be willing to explain this process, somehow....lol

[@dabillionaire90z]

plz post a video for me

[@dabillionaire90z]

ok , so that wire should still be in there

[@Wrathernaut]

You skip programming a function by pressing the button on the adapter.

[@Dewtweedy]

Where does the green wire coming out of the PAC go to on the car? It says pin 6 (blue) but I don't know what it is talking about. I have a 2006 Chevy Impala