Project Twin VNT - Twin Turbo TD42 Patrol - Episode 14

[@MrSany24]

Been waiting almost a year for episode 15 fingers crossed will be soon

[@cammy470]

its not looking good.

[@mohsennazari4691]

12 months in

[@rapavingandlandscaping7623]

Still waiting

[@PsychoTB48]

2 years now haha

[@MrSany24]

@@PsychoTB48 yeah some how I think he is done with the hole KZbin thing unfortunately 😕

[@ag6671]

It's ok to blink my man

[@hannahsimpson391]

6:05 he kinda blinked

[@itttssssRilesss]

"I may have the most underutilised 12mm out there" That cracked me up!

[@the_mystery9803]

Okay, I'm now concerned, It's been over like 2 years, where are you dude. Still waiting.

[@rapavingandlandscaping7623]

The_Mystery 980 yeah I sorta wanna know how the turned out, keep checking the page just to be disappointed

[@thomasphilyaw8593]

Where have you been??? Thought you fell of the face of the earth. Love to see your work... looks like you can fabricate anything you need with a tig no less. Good job on the truck. Can't wait for a full pull to see what she can make

[@bigdawg8351]

Jesus,i love this guy and his videos. He deserve at least 1M subs!

[@NuggetMuncherGammer]

Holy shit its Garry Ablett.

[@_____7704]

haha

[@pwellz]

I was about to write “it’s an angry Gary Ablett jnr” until I read yours!!!

[@intothevortex7825]

The beauty of fast forward. At least I know there's no end now. Cheers

[@Zukini28]

Your channel is the most underutilised! Sad to see the build come to the end, excellent entertainment and a bunch of tricks learnt along the way. Thanks

[@Turbo_Tractors]

Best thing to wake up to ever. Can't wait to see this thing drive and if it's more responsive than my single turbo setup.

[@roxjeruben]

Dude, I am waiting for years for the next video release!

[@funkypotamus]

Great series. Thanks mate. I would love to see another video telling us how things have gone!!

[@keithjurena9319]

Fantastic series. I am doing a twin vnt turbo on a GM 6.2 diesel V8. Using TPS and RPM in 0-5 volt output to a summing op amp to map the boost. This sum will be converted to PWM signal to drive a vacuum solenoid. A boost max pressure relief valve will back feed the vent line to this solenoid for a degree of closed loop control. VNTs almost require closed loop control.

[@nathanaelcain9557]

Hey man how's the project going? Would love to see some more!

[@AlexOzyBoy]

After 14 episode's I still haven't seen you blink mate haha. Loved the series

[@dkeracing9325]

The shirt joke - fantastic.

[@anthonyforgey3518]

I've thoroughly enjoyed this series, having also added a turbo and intercooler to my TD42.

[@kellywynn8285]

Great work mate loved the series glad to see the truck running again and taking some advice from us viewers best of luck with your adventures

[@fitlargo9084]

You haven’t blinked in year an a half

[@hannahsimpson391]

6:05 he kinda blinked

[@s.ol.5511]

Not sure how I stumbled across your channel, but I've been following your build since I did. Great content, not only do you seem very knowledgeable, but you do the work yourself! Best of luck and looking forward to whatever project comes next.

[@amos5543]

Awesime series will be sad to see it end but cant wait to see a full throttle run u r a top bloke with some awesome skills

[@GdaySport]

Glad to see you didn't give up after your blow up. I like watching your videos - there is nothing like watching something take shape from scratch.

[@danahern395]

Simply awesome!!!

[@burgatron69]

Always love your videos mate, well done! Shame to see the series end, good luck with the truck and looking forward to ep16 if you “unpermanent” the boost control solution.

[@dinksontour2179]

Hi Dogged glad to see you back,and have found some answers for your big bang fingers crossed it all works well ,looking forward to the action shots rgds Peter

[@KrissWKristoff]

Make sure you do another series. This was great.

[@mysticgoat3246]

Love your videos man and the dogs are a nice touch, watched all the vids and given me a few ideas. Apart from the killer mechanical content I also love your dogs! Really love it, keep up the good work!

[@nmsmitto]

👌 good outcome, heaps in reserve if you need. No need to blink, that’s all sleeping is really.

[@ridiculousthings4x4]

Hi VNT guy. Your channel is pretty much the reason I made a KZbin channel. It's a shame you stopped, you magnificent bastard.

[@connorstyles6664]

Waiting for the next episode! Keen to see how the Patrol is coming along

[@connorpalmer356]

love your work man you have some real cool ideas and alot of talent putting them to use, inspirational!!

[@connorstyles6664]

We are still hanging out for more content from you man! Hopefully you return soon

[@chaoticmuscles]

Top series mate hope theres more to come in the future and have you considered patreon?

[@UncannySense]

Been almost a year without a new upload, really miss the content hope you're alright.

[@benisaac5359]

Awesome series mate. I am looking forward to the action shots.

[@jeremyakester199]

Everyone wondering if he’s going to do the next episode, it’s not going to happen unfortunately because he doesn’t own the car now (I own it now)

[@jeffreythomas815]

How's it running? 👍

[@FastaFuture]

where did you go mate ?

[@greatsouthernoverland]

Fella you know your stuff, love ya work!!!!

[@draleonpastoralco]

Best patrol series on KZbin. When do we get some more episodes?

[@angusmcguckian7314]

nice work ...looking forward to more! Always entertaining

[@fraserallom9545]

Awesome Work, Honestly.

[@Crawer101]

Thanks for another great vid. I've loved this series!

[@nooki1102]

awesome stuff bud nice work. good come back. You should setup up something so we can support a few ideas in such ways as stickers or something. we enjoy the entertainment and its worth a few bucks your way to perhaps fund a new project.

[@alanclarke5979]

What's going on mate??!! I loved watching this project, any work on the horizon or she in the bin??

[@one1shot1shaun]

Been waiting since 2018

[@lindakendall5567]

Love your torque curve and all that boost before 2000 - 10 psi at 1300? Gotta love that. Something to be said for a small turbo and more to be said for 2 of them :-)

[@lukaszlewicki5838]

I wish there was more episodes. It was great channel to watch and I liked your sens of humor. A bit like "project binky". You should keep making videos.

[@leokeefe3618]

Been 3 yrs hope it’s still coming

[@HardstylePete]

Looking forward to seeing an update.

[@thegingerpowerranger]

Time for a new project?

[@PitFighter2007]

Welcome back dude, missed your updates!

[@aouei]

Love your work, wish I could shout you a round.

[@Reuben_rmr]

Awesome video mate! Why not run positive pressure actuators to control the vanes. Torque master actuator or similar, I think turbosmart do one and spply different springs for different boosts, coupled with a boost tee you could set it nicely.

[@MrAllstar]

Yee Haa!! Its back!! One of my favourite series on KZbin, interesting and just enough dry humour/quirkiness, please keep posting cool stuff after the next episode 👍👍

[@lsgemini7686]

Definitely a wizard

[@kyiahhills3245]

More vids please this ones been out for 3 months I’ve been waiting for another one like would be good to hear snorkel sound for the twin turbo would sound crazy

[@TechnologyOZ]

Magnificent.

[@juliancampbell4927]

Been waiting 2 years for ep15 still no sign

[@chrishiggins1811]

Great to see an update mate always liked this channle

[@Xavier_Reynolds97]

@Dogged Fabrication can you please release another video

[@lethaldriver]

what happened to Episode 15? I want to see more of your project. Hope to see it running and making lots of boost.

[@adman6380]

awesome work and videos as always

[@renarssterns7528]

For example in this situation to control vnt with a compressed air of the turbocharger (like wastegate turbo) you can take + - 1 bar westegate actuator and install it directly in a vacuum actuator place. For example from Discovery Td5 C2J7. Before wastegate actuator install manual boost pressure valve - it will be able to start to control wastegate actuator in range what will exceed 1 bar. With compressed air from the air compressor or tyre, adjustable air pressure regulator with gauge and manual boost control valve you can adjust at what boost wastegate actuator will start to move (lower turbo pressure ). If boost is too rapid, you can make it a little bit slower experimenting with a stop screw adjustment. For safety you can install external wastegate valve before turbo.

[@363TOMTOM363]

I still hold out hope that one day he'll update it or start another build but I'm probably just dreaming 😪

[@ohheyyythere1287]

He’s sold the car. A kid on TikTok has it now and he’s sold turbo setup off and gone a ufi21L. Bit sad but takes a big brain to do what this man has done

[@NissanAltima2005]

the 1000ft.lb were at 1400 rpm while there is no boost in the newer dyno run. Well, a 1000ft.lb will snap the input shaft but try to partially recover that low end torque as it can not be resisted.

[@rollyb5061]

love your skills, watched it and just had to subscribe

[@PitFighter2007]

Dude....come baaaacccckkkkk!!!

[@thegingerpowerranger]

Time for an update?

[@mickromer6199]

So it's been 8 months bro where's the review?

[@Xavier_Reynolds97]

mick romer been craving another video , needs more uploads even just casual daily vids of driving etc

[@jacobwoolley2114]

"Overboost valve" used on xr6 turbos or turbo LS powered cars mate

[@the_mystery9803]

Nooooo, this series was so dope, would be mean if you did another

[@japorah]

R.I.P. mate you'll be missed ❤️

[@Nick-sd7um]

Figuratively?

[@hardliquor4x493]

WELL DONE NO BULLSHIT THANKS FOR SHARING

[@viktor__6971]

Yes! Finally new video 😊 your project is so interesting!!!

[@matthewjones8484]

well done mate, awesome series, whats next after this then?

[@codevynz25]

finally sir, been waiting forever for the next episode...

[@DrSpanky]

It has been a while... you added anymore power?

[@cloud2853]

Cars up for sale, never going to see another episode. RIP

[@adventureaus1270]

Genuine question did he die?

[@COSHAM77]

when's season 2 coming out?

[@blackie75]

It's been a year...what's been happening with the beast?

[@mitchdosethings935]

I need to see it now

[@markbarrett9637]

Hey mate. How is the vnt turbos going? You should make another video.

[@benwhitmore2265]

Would a dwase valve work? Like what they use for the NADS? Just in case it really fucks up?

[@carlos.79cr]

keep it up, very interesting videos!

[@joshuaswart4917]

One thing that has changed over time is how progressively your shirt get dirty

[@ajimaster287]

When ya back mate?

[@hi808afstate4]

Where’s the videos at man? Been awhile

[@samscott8727]

where are the vids?????? come back mate !

[@arnhemland4wding756]

Soooooo, whens the next episode coming up?! 🤙🤔

[@harisfadlillahJBL]

Hey dude, please comeback

[@kitts1234]

Do you never blink?

[@PsychoTB48]

So what happened to this project it's been 2 years since you posted anything

[@matthewosullivan382]

Almost 2 years later still waiting for the next episode

[@ReubenHorner]

Hey bud, Just wondering how you are going. It's been almost a year..

[@SerialPest]

Where has he gone :( been waiting so long for this next episode

[@dcsymbols4450]

Should plug in two turbo compressor speed sensors.

[@noremacbeez]

Miss u bro....

[@adman6380]

hows the truck going?

[@unusualracecar]

Dear mister serial killer...What kind of Tig welder are you using for your awesome projects?