Did I Waste $5000 on Engine Parts? More Horsepower & MPGs? (Part 1)

[@WarpedYT]

How did he not break the exhaust bolts, that's a trick we need to know.

[@slingshotnerd]

Very very carefully that’s how

[@glennschlorf1285]

Hes not an idiot thats how... in many cases you tighten bolts before you loosen them that helps sometimes

[@WarpedYT]

​@@glennschlorf1285your not an idiot either have u never broken a bolt? "Sometimes" is the key word in your comment hahah.

[@WarpedYT]

​@@slingshotnerdwell that's true yes, but information is king and I am curious how he did it..

[@grimpreacher3152]

​@@glennschlorf1285you write a foolish comment

[@jttech44]

It warms my heart to see Todd doin something for himself. Hard working man deserves it.

[@ProjectFarm]

Thanks!

[@KineticTaco]

Sure does deserve it, can’t wait to see the final product. That truck is going to last as long as it’s rust free.

[@NOGRIZZGUY]

I only watch this channel very ocasionally, but he has always seemed so genuine and I know he has tested so many things, all without doing much for himself, so I am all for him doing more of this kind of stuff :)

[@micahtolleson9735]

me to i see him on here testing stuff out and i'm glad that he's doing that for himself

[@taxpayer6079]

I agree.

[@chriscairns1731]

Just when I had thought Project Farm had peak content, he comes in with some sweet new content, and didn't spare on the editing and voice over, nor the cost of parts. I couldn't say how grateful I've been for your videos. Absolutely one of the greats!

[@ProjectFarm]

Thanks so much!

[@coreywalker5185]

Said best

[@danno5805]

​@@ProjectFarmhow much was the labor lol Most garages will charge you enough to buy a new truck lol

[@sed6]

Yes, this was a very enjoyable format!

[@triktrak_1451]

Yep! 👍

[@baddoges]

I am a huge car guy and have been following the channel for quite some years now. This is awesome to see. Love this kind of content. You keep doing you Todd.

[@ProjectFarm]

Thanks and you are welcome!

[@bryanbatton01]

​@@ProjectFarm i have one for you if you haven't already. Do certain tires/tread patterns pick up nails more than others.

[@rubenfranco9046]

It never ceases to amaze me, the amount of clear, concise information that this man can pack into a video. 👍

[@ProjectFarm]

Thank you!

[@KB3AOL]

@theodoreolson8529 I see what you did there! 😜😆

[@harrywalker968]

towing 5t.??..here in aus, 3.5 is maxed out..due to jap utes.. i have an 02 s/duty, 4.2tdi mwm sprint,, built in brazil.. 700nm. 240hp.bigger turbo, no computer crap...pulls 4t up hill no probs. thats 8.5 all up..old vehicles last longer, easier to fix.. i learnt yrs ago, allways working on a 4 banger, then bought v8, never touched it.. cant beat cubes.. computers die..@@ProjectFarm

[@grantkauffman8578]

Written by a true man

[@Istarelle112]

Yes I agree, the engineering and planning and math that goes into something that takes me from A to B is incredible. Making all that make sense to a lamen like me is a true skill, fascinating video.

[@zacharylewis7905]

Definitely gonna love these performance oriented projects, pretty cool addition to your normal videos.

[@ProjectFarm]

Thank you!

[@Tawnos_]

​@@ProjectFarm They are a great expansion to your style of investigating topics, evaluating them, and helping us learn alongside you. The only constructive criticism I can offer is to vary up your transition/explanatory phrase for scene cuts. There was a lot of "let's . let's . let's " that wouldn't sound as artificially punctuated with a script like "let's letting us . Next, the " or, if the shop was doing the work and you were describing their work "they first before and ". In your typical comparison videos, that kind of word repetition doesn't typically develop because instead of "let's", you usually are naming the product under test.

[@ashuael5732]

hey you ever spingle the bongle? @@Tawnos_

[@Tr6e9nT]

I like the deviation from the regular content. Getting other folks involved with a large project. You made that 12valve come alive! Can't wait for the transmission video now.

[@ProjectFarm]

Thanks!

[@crazycoffee]

​​@@ProjectFarmI'm not that far in the video. Is it an auto or manual? I have an old D350 with a nuked G360 transmission. Awesome to see you upgrading your truck. You deserve it for all you've helped others. You've saved me lots of money throughout the years!

[@DaveInPA2010]

Just forwarded this to my diesel mechanic son in the Navy. This was a great rebuild! I’m normally watching your other product comparison videos so this was really different, but your rapid-fire voiceover, and intensity really puts icing on the cake! Thanks so much! Go Mopar!

[@ProjectFarm]

You are welcome!

[@serpinio]

You already know how amazing of an engineer and a handyman you are, but getting such a complicated process recorded, then properly edited and narrated - all without awkward pauses and mistakes - that is some incredible dedication and dare I say... perfectionism? :)

[@ProjectFarm]

Thanks!

[@tarstarkusz]

I disagree. This video is WAY too short and way too fast.

[@Alex-Zone]

He is definitely not an engineer

[@Alex-Zone]

I am grateful for the information he provides though

[@wesleyhryszczuk9442]

Haha that’s my only beef.. I wish the video was much longer!!! Love this guy and his great skill explaining all the fine details of everything! Great job ProjectFarm!👍🏼👍🏼 you da man

[@YorkyPudinz]

I watch a hell of a lot of performance build stuff on YT, im only 8 mins in here and its already one of the most in depth without becoming boring, builds I've come across. For your first video of this type of genre, you've absolutely smashed it in my opinion, well done 🤘 Looking forwards to the future uploads as always 🫡

[@dlewis9760]

I think it's because the lack of fluff and speed of delivery.

[@aarontheidinut8926]

absolutely agree 💯 flawless execution, great in depth info, to the point no excessive fluff. same reason we all love @project farm as a Channel

[@ProjectFarm]

Thanks so much!

[@fidelcatsro6948]

yes its so comprehensive even racing team mechanics are going to watch this as training video material🐱👍🏿

[@Typh3621]

When you think about it, 5k for a 50% power boost is actually quite a bargain. People often spend more than that simply to gain 20 or 30 hp. Love to see you doing engine stuff on the channel again, please dont ever be afraid of thinking outside the box with these videos, they are so spectacular. Id suggest targeting the farmabago next for engine//mod videos. It would be awesome next to the cummins videos.

[@SeventyEightCivic]

It was worth it for sure, but I doubt that transmission plus installation was less than 6k alone.

[@garycarpenter2932]

not knocking this, but that's 5k in parts. best have another 10k to spend to do this, without the trans. it's closer to 20k when all is said and done. so it's 25k. now i didn't work on diesel engines, but built my fair share of hot rods. sure i could get 550 horse out of a 350 by spending 5k. but i did all work. labor ain't free. other than that? this guy is good.

[@hughjass1835]

I second the Farmabago for the next upgrade. Cheap ebay turbos and a convertor upgrade. I bet he gets more than 100 horses for half the investment

[@pitbullw35581]

$5k on cummins diesel was money well spent If you take care of them with maintenance they are virtually indestructible

[@MAGGOT_VOMIT]

Wow, I remember back in the 90's BOMBing my 12v trucks to 400+hp with a set of Bosch 370hp injectors ($320), Extrude Honing them ($50), made our own cam fuel plates ($0), all the HX-40 and HX-55 turbos we wanted from the diesel junkyard for ($500ea), New HD South Bend clutch ($300?? can't remember). The 12v was by far the cheapest ($$per hp) engine to upgrade out there.

[@TheNiteNinja19]

I love videos like these because it breathes new life into older vehicles. Andy can do it way cheaper than purchasing a new vehicle.

[@ProjectFarm]

Thanks for the feedback.

[@phobos258]

I didn't know I needed project farm to narrate a vehicle upgrade video. the quick pace, concise descriptions, and pertinent information make it better than anything on TV

[@ProjectFarm]

Thanks so much!

[@easytalker864]

TV is dead. It’s a wasteland.

[@manolimanioudakis8456]

So happy to see you post this! We ( the fans ) will watch anything that you post. It's not the product we're ever interested in, it's the concise consistency in your hard work, dedication, and work ethic. Never selling, just providing us with your truths and findings and we love it.

[@ProjectFarm]

Thanks.

[@olileatsnoc]

I second that!

[@sanctealphonse4510]

Uhh... no "we" wont..

[@manolimanioudakis8456]

@@sanctealphonse4510 then you ain't a fan fam

[@sjv6598]

@@sanctealphonse4510 neither will I! Typical simp comment “wE’lL wAtcH aNyThInG yOu pOsT”

[@PageMarker1]

Wow, that view total is really moving. Glad to see you finally invested some money in yourself after all these years. Make no mistake, those mechanics are top notch professionals who really know what they are doing. Well done on one of your most memorable videos we've witnessed.

[@ProjectFarm]

Thank you!

[@Wheresmy240]

Project farm is a real one. No matter how popular his channel gets my man doesnt change and is very respectful and considerate. A lot of people become condescending and materialistic, but not PF. So happy for you and your channel. You make great content man. Thank you.

[@ProjectFarm]

Thanks and you are welcome!

[@TastySurrealBowl]

What a pleasure it was to see the attention to the details in this project. The patience required to do a rebuild like this right deserves serious respect. Thanks for the video!

[@ProjectFarm]

Glad you enjoyed it!

[@Watchyn_Yarwood]

Agree!

[@tatersgonnatate5650]

This is an awesome series! Please more videos like this!

[@ProjectFarm]

Thank you very much!

[@SockyNoob]

Yay a non-product old style farm video! I love your other videos, but these are always fun. Love that you partnered with a well known engine tuning company, and how you still kept the information easy to understand. These guys seem to do a great job and have tons of experience working on engines. I appreciate that you're getting your truck upgraded the RIGHT way. These guys aren't just increasing power and torque, but increasing fuel efficiency, reliability, and usability all while reducing emissions! I imagine tons of companies have this tuning shop service their diesels. This is the type of service that costs a lot but it's actually worth that much, you're paying for the amazing improvements and quality job done.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@1pcfred]

They do seem to know what they're doing. When they were pulling that one gizmo out full of springs I was thinking I'd never get that back together.

[@Knotaro_bot]

I believe you would have great success doing more tutorials like this. Your delivery and usual attention to detail would make them some of the best around .

[@ProjectFarm]

Thanks for the suggestion.

[@lightwoven5326]

I am amazed at the complexity and the skill involved in this upgrade. As the others have said the improvements are worth it. Shows how over engineered some older engines are.

[@NONO-hz4vo]

This though is almost unanimously considered to be the engine with the most room for cheap improvements. Most other engines will not benefit nearly as much as this one, especially any of the newer diesel engines which have already implemented most of what these aftermarket parts are replicating.

[@ProjectFarm]

Thanks for the feedback.

[@toasty4000000]

If there is that much room for improvement, I'd personally call it under-engineered (but over built)

[@James1095]

It's a matter of semantics, "over-engineered" can mean it's designed such that it is overbuilt. There are valid reasons for building a lightly stressed engine that produces much less power than it's cable of, longevity. Most modern car engines are dialed in to within an inch of their life, they wouldn't last a month towing a heavy trailer over mountain passes.@@toasty4000000

[@grumpyuncle.]

Me too. I am never opening up my engine after watching this. I would “brick” my engine in the first 2 hours.

[@redarrowsmk3]

A masterful video to prove that a turbo upgrade alone is not what improves the performance of an vehicle, a HUGE misconception! Thank you very much for breaking down the entire process, Todd! If you’re enjoying these kinds of tests and more folks than myself show interest in improving a belt-driven, carbureted engine, I’d absolutely love to see it. Take care!

[@shona5512]

It's entirely dependent on the engine. Many of the cars I have just required a turbo upgrade to make more power. Obviously, you will have to tune it again to get more power out of the turbo, but if your car is capable of it, your factory injectors and intercooler are enough to make a large difference in power. However, if you want to get the absolute most out of your turbo upgrade, you're best to upgrade other components as well. So basically, you can improve performance with just a turbo upgrade, but you won't be able to get the figures that the turbo is rated for, without other upgrades.

[@devdecker7812]

Well , smaller engines get less effect just from turbo . Bigger engines get a bigger boost because of percentage

[@Demoralized88]

You don't even need a new Turbo anymore - tunes just up the boost from stock. Modern DOHC Turbo engines will very much improve with a little more boost. Older pushrod and 2v Diesels are so flow-restricted that they can't make much more without greatly improving head flow and raising the RPMs to take advantage of it.

[@supersimon126]

It's clear that there was effort put into doing it properly and addressing potential weakpoints, making it fit for a fight as a daily driver, rather than trying to make cheap power by throwing on a big turbo and just dumping in some more fuel and calling it a day. Personally i find this type of content very enjoyable to watch and a good fit for the channel.

[@ProjectFarm]

Thanks!

[@mikefromwa]

A suggestion for a future video: I'd love to see tests on LED bulbs, the standard replacement kind for 120 volt sockets. I'd like to see which ones are really, truly dimmable, how much power they really use, and how much light they actually put out. Thanks Todd, I love your videos, keep up the awesome work!

[@Col.Sandwich]

Couldn't agree more. I feel like I'm constantly changing the ones that are supposed to last 10 years

[@402SHO]

This has to be one of my favorite videos you have ever done. The time, money and effort you put into these videos really shows 👍🏽

[@underourrock]

100% agree. I really like the videos here, but this was fantastic.

[@ProjectFarm]

Thanks for sharing!

[@jamesscott1932]

@@ProjectFarmreally enjoyed the format, subject and explanation. A nice change of pace.

[@SockyNoob]

​@@jamesscott1932 same

[@kimkleiner8456]

@@ProjectFarm really impressive!

[@mikelastname]

I can't believe you guys did an engine upgrade video in just 18 minutes and showed it all. The diesel mechanics made it look so easy too - this would be days of work for me, and at the end I would be missing a lot of skin from my knuckles and have invented several new curses. Fantastic. And now you can spin the wheels in 3rd gear as well - always a sign of a fun vehicle to drive 😂

[@ProjectFarm]

Thanks for watching!

[@KG-th3cr]

I'd also have some "extra" parts left over.

[@bdwilcox]

With only a passing knowledge of gas engines, the close captioning for what they were doing here might as well have been in hieroglyphics.

[@bjn714]

This was certainly a fun one! As much as I enjoy the usual content, having something totally different but still presented in your usual highly detailed style was fantastic! Can't wait for part 2!

[@ProjectFarm]

Thank you!

[@jonnathan780]

I really appreciate the focus on fuel efficiency and clean running diesel, amazing seeing 0 soot come out while on the dyno. I hate seeing all these clowns with their diesels that are poorly tuned, rolling coal and have shit fuel efficiency with less power. Awesome video and amazing gains!

[@Bloodcurling]

Agreed. I had to properly calculate and size my full exhaust properly for the exhaust shop. Everyone just comes in and wants 3" pipes. I explained if I was going true dual with true x-pipe I don't need that and to keep the stock size size. I also installed race converters. My case was gasoline The black diesel guys don't realize that all the coming out of the exhaust was also in the cylinder, all that soot does get into the oil and ruins the engine faster. Look up the oil change intervals of diesel vs gasoline vs CNG

[@wutang80oc39]

People who roll coal either have some extra chromosomes or brain damage, so they probably don't care that their rich tune makes less power and wastes fuel.

[@leeisenberg]

@@Bloodcurling CNG? What's that?

[@reubend340]

@@leeisenbergcompressed natural gas I think

[@redneckrevolt1]

I hate how uneducated KZbin is 😂😂

[@Kowyn]

I wonder how many people left when it was mentioned the new injectors would reduce smoke 😂. I never understood the attraction to rolling coal, just money out the tailpipe, I've got mine tuned to run clean as possible. Great video! Love to see more like this!

[@thecloneguyz]

Gale Banks or bust

[@tgriebe]

Same idiots who run an extra loud exhaust. Basically children in adult bodies.

[@ashuael5732]

I think it's sort of an F U to people like the Just Stop Oil protestors. true it's money wasted but people choose how to spend it

[@zokieboi]

more flow can assure correct injection timing, too late end of injection because of low flow is only causing hig EGT and smoke and not a lot of power...

[@QuietRiverBear]

The dude bros that want to roll coal have done orders of magnitude more to damage the reputation of diesel engines then the combined impact of every other possible contribution to diesel’s bad reputation. Karen may never buy a diesel, but if you roll coal on her, she’ll do everything to make sure you won’t either.

[@matthewrichardson7020]

I am honestly so glad to see that you did the upgrades the correct way. A lot of people just do injector’s and a fuel plate. I am just giddy to see it done the correct way and to unlock the true power of a 12 valve

[@giggiddy]

Do you think that with this upgrade doubling the horsepower, it has minimized the reliability that those engines are known for? It would be great to have a 400hp diesel like this that you can still run hard and expect 500k miles or more. Cheers

[@cowthedestroyer]

@@giggiddy it will run fine its still not pushing near the power numbers it could without having issues. It will probably last untill the block develops a crack around 1.6million miles but i doubt that truck will last that long nor will he put that many miles on it

[@BruceLee-xn3nn]

​@@giggiddydoubled HP on highest settings. You don't need to run all out all the time

[@redsite001]

​@@giggiddypower driven diesel just did a teardown video of a 600hp 12 valve cummins that was a daily driven truck to see what the effects were. There was almost no visible wear. The rod bearings were all perfect but one, had a very slight line. Id say that could be due to a grain of sand or small metal fragment during assembly.

[@kwmiked]

​@giggiddy u ever watch zip ties and bais plys? He runs the shit outa 500k junkyard motors turned up to max and they don't blow up easily. He runs them flat out till manifold and turbo GLOWING Red and they still run lol hard to kill a 12v when properly modded and a normal person with a little brains behind the throttle pedal

[@johnwkomdat]

Video idea: best dehumidifier. My main concerns are about effectiveness, energy efficiency, and unit lifespan (a LOT of reviews say these machines die early). Thanks as always for your hard work.

[@ProjectFarm]

You are welcome! Thanks for the suggestion.

[@tachometer74]

@@ProjectFarm And please include some non-mechanical ones. I've got a car that got some moisture in it (loooong story) and was hoping that I could get some good results without having to run a power line.

[@JamesR23]

Best dehumidifier is a good one

[@tylerwehrle3595]

As someone with a massive tree in my yard, as long with bags upon bags of leaves, I think a video comparing leaf vacuum/mulchers would be amazingly helpful!!

[@dwaynezilla]

regardless of whether it works at what it's supposed to do, Project Farm buying the parts and testing it is worth it, and worth it every time

[@ProjectFarm]

Thank you very much!

[@BruceLee-xn3nn]

Probably the only one on KZbin that buys his own parts and doesn't accept sponsorship.

[@lilmez34]

I thought your channel was the peak of KZbin before, Now I'm just mind blown. Never stop what you're doing the world needs you

[@ProjectFarm]

Thanks!

[@oldmercedesdiesel]

Great video. I finally had no choice but to move to a newer 4x4, but I really loved my 97 12 valve with some engine upgrades and a six speed manual. It's great to see a shop that really knows how to bring the 12 valve alive with less emissions and better fuel economy and not just turning up the fuel like most I see. Power Driven Diesel is definitely going to be extremely busy doing cummins upgrades these next few months!

[@ProjectFarm]

Thank you for sharing!

[@cjwu6825]

Thank you for your amazing content! With all your videos, the time and effort you spend to come up with the objective criteria then design, conduct and film the tests (with normal-ish equipment) is just incredible. Your tests done over a year 😱🤯 👏 You are exactly the type of content creator that makes me appreciate social media.

[@ProjectFarm]

Thanks so much! Thanks for supporting the channel! I really appreciate it!

[@Kyle-ev4fk]

Normalish equipment? Who has an Ultra low freezer at their house. Do farmers have these in the barn to freeze livestock seeds?

[@OmegaBlack999]

This was unexpected, and even though I'm not much of a car or truck guy, a really enjoyable change of pace. I'd definitely be interested to see you branch out to test vehicle mods and such or to do more colabs with other channels. However, your original content is some of my favorite, period. Thanks so much, Todd. We're just glad you're here.

[@ProjectFarm]

You are welcome! Thanks for the feedback.

[@15Xalbatross]

Good job on the new vid. You have got the best truck you can have now. I was a diesel mechanic and you just can’t beat a Cummins. Especially pulling hills! I love your new concept adding mechanical detail and how things function as you do it. Great job and look forward to the transmission one next!

[@ProjectFarm]

Thanks!

[@ElainesDomain]

Tripple Nickle? The 555 ran great.

[@bradjenkins932]

LOL.

[@tankerd1847]

Dang, didn't think I'd be watching you explain upgrading the turbo on a 12 valve Cummins this week. I really liked the collab and change up from product reviews. Your editing and narration style really explains the ins and outs of a complex job quickly and in an interesting format. I was skeptical when you mentioned changing things up but I definitely liked it. And seeing as you're getting pretty big time as far as KZbin goes, you're probably getting more and more imitators and are wise to diversify. Great video!

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@ethangurley317]

Its awesome to see you showing how to keep something older up to current standards with the direction the automotive industry is taking with planned obsolescence. Thank you for the amazing video!

[@ProjectFarm]

You are welcome!

[@pvbarbell1904]

More horsepower definitely makes a vehicle more fun. I added 200hp to my 2017 powersmoke Ford. The 8000lb truck is like a sports car now with 650hp and 1200+ torque

[@Quebecer_Powerstroke]

Did the same, these newer diesels are crazy.

[@ProjectFarm]

Thanks for sharing.

[@stgibson2810]

I’m sure your truck is fast, for a truck. But it’s no “sports car” lol. At the end of the day it all boils down to power:weight ratio.

[@servicetrucker5564]

@@stgibson2810Like a friend of mine told me. Better to have a 2000 pound car with 200 hp than a 4000 pound car with 400 hp

[@pvbarbell1904]

@@stgibson2810 OK take me literally LOL. My point is that it makes a 8000lb truck feel sporty. Is that better? I have a Vette too, so yeah it's no Corvette, but in a straight line it's pretty quick.

[@BrilliantDesignOnline]

Very Impressive! I have not worked on any of these diesel engines, so I am amazed at the complexity; I am also amazed at the level of skill and knowledge of the guys at Power Driven Diesel making short and accurate work of this. If I needed this kind of work, I would take it to them, because it was totally worth it considering the outcome and the amount of work and specialty parts needed. More of this content.

[@ProjectFarm]

Thanks! Thanks for the suggestion.

[@Macros1971]

I know how this feels. I have a 20 year old Jeep Wrangler and I just got a lot of engine work done. Replaced the cam shaft, injectors and valves, all the wiring and the radiator. It runs SO MUCH better and so much cleaner and with more power. I bet you love driving the truck now!

[@sparkie5571]

same here with my jeep, timing, entire fluid flush, injectors, valve springs, intake plenum. car sure feels faster! i know we’re talking about jeeps here but i did actually gain a full 1.2 average mpg (lol from 10.1 -> 11.3 mpg)

[@ProjectFarm]

I do! Thanks for sharing.

[@workingcountry1776]

4.0 is a fantastic mill w/ good aftermarket support

[@JasonFrankenstein]

What a great way to upgrade the truck as a business expense! 😂 Really though, the results were impressive. I'm looking forward to see what a fresh transmission will do. I know the ram transmissions in this era were pretty weak.

[@oliverevans9057]

I swear I never care how long your videos take to make, I'd wait weeks for one of your videos just because they are such high quality. I also love how passionate you are about your videos. No shortcuts taken just pure quality videos. Thank you

[@ProjectFarm]

Thanks and you are welcome!

[@mushroomsamba82]

Enjoying this different video format. I think it's well worth branching out a bit with the channel.

[@ProjectFarm]

Thank you very much!

[@CoolVIguy]

I Love watching the channel grow.... As a licensed tech I just keep nodding and agreeing with everything I see being done here. Nice change up.... Youve reviewed every product we can all think of, and its time to farm other stuff. Awesome Todd 👊

[@ProjectFarm]

Thanks so much!

[@redbarond1]

Such a great video! Super excited to see Part II. In particular, I appreciate how you prioritized making more power efficiently, rather than just trying to roll coal every time you get on the gas.

[@ProjectFarm]

Thanks!

[@reverse_engineered]

Amazing! I also watch Robot Cantina on Sundays when I watch Project Farm, so this was like a 2-for-1 episode! I appreciate that you are trying to make the old truck work well rather than just trying to make a bunch of smoke and noise. A powerful engine should also be efficient and reliable. I look forward to part 2!

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@blakeaasgaard9028]

Project Farm & Robot Cantina For Trump's Secretaries of Energy! LET'S FIND OUT !!!

[@tiagoferreira086]

Damm what a complex fuel management system! Also 100hp gain no smoke and same egt??? Very impressive indeed!!! These guys knew EXACTLY what they were doing, very professional job. Very interesting video...

[@ProjectFarm]

Thanks!

[@ShadowzGSD]

love the mechanical and engine ones, i couldn't click on this quick enough. 😁 how about adding soundproofing to your list, see how quiet you can make your truck.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@Phantomhomes]

I've watched you for years and years. You've helped me so much over those years. Thank you and you are truly appreciated.

[@ProjectFarm]

Thanks! Glad to hear!

[@duncanherbst7850]

By far in the top few "how to" videos I have seen. Very detailed in the right places and makes the process seem simple. But also very entertaining and engaging. Anyone with a little bit of knowledge about engines could use your video as a blueprint and turn a week job into a days work. Love it

[@ProjectFarm]

Thanks!

[@paullane7489]

Love this kind of content!! The guys at Power Driven Diesel are great people!!! Excited to see you collaborate with them! 👍🇺🇸👍🇺🇸👍🇺🇸

[@ProjectFarm]

Thanks! It was a great experience.

[@mendonesiac]

Great video! I always like collaborations between KZbinrs. I'm guessing $5,000 was only parts, not labor. I'm sure you'll tell us what that performance transmission cost on the next video. Looking forward to it.

[@ProjectFarm]

Thanks!

[@_JamesBrown]

I love the transparency

[@barongerhardt]

As a rule of thumb, double it.

[@ChevyConQueso]

I just spent close to $4K from PDD and I'm just getting started on my 12 valve build. I'm over $6K including short block purchase, swap mounts, machine work, etc. But, it'll be the last engine the old truck ever needs, churn out 500 hp, and still deliver very respectable fuel economy. (Going in my old '83 Ford 4x4)

[@ChevyConQueso]

​@barongerhardt 100%. I don't even add up what's in my Foxbody drag car. I know the engine cost, but it's the ancillary stuff that really pumps up the bill.

[@Cwayne1989]

Man I'm so fucking proud of you and this channel for how far its come I literally found this channel after fixing up a 04 Infiniti G35 and was wondering if Seafoam was worth a shit, and what a wild and cool ride its been to watch this channel grow to what it has become today. You deserve all the success in the world my man, Congrats on the truck upgrades

[@ProjectFarm]

Thanks and you are welcome!

[@frizzlefry1921]

Yes seafoam works an oz per gal in gas tank and hit the freeway nonstop for an hr. Use premium gas and let the engine breathe.

[@James1095]

Great video, impressive results from those upgrades. I'm hoping this doesn't replace product testing but it's a nice change of pace to sprinkle a few of these in.

[@556online]

Love this. It’s a little different than what we are used to but wholeheartedly welcome. Btw I am on my 9th 12 valve Cummins. It’s getting harder and harder to find clean ones and the prices have shot up quite a bit. It’s still the best engine ever made with multiple trucks at over a million miles. Once again awesome video.

[@Demoralized88]

Yeah they're reliable, but only because they have no power. You reduce the RPM/boost to 180HP and

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@fdavid]

I respectfully disagree. If that was the case then why aren't the 6.5 gm amd 6.9 ford's of the same Era known for being as reliable? The lack of electronics, 40% less parts than its counterparts, robust p7100 injection system, straight 6 layout, medium duty design, mechanical fuel pump and about a dozen other reasons are why it's so reliable and awesome. Even turned up they seem to last forever.

[@connorjones1485]

@@fdavid6.9 fords are known for being reliable. You’ll get over 500k out of one absolutely no problem with some basic maintenance. But they don’t have the potential power like the 12v, so they don’t get talked about.

[@MelonianEmperor]

With the way that you are meticulous and thorough with your tools, experiments and tests, I am not surprised that your truck had a lot of horsepower to begin with. Very good video and I learned a lot about engines today :)

[@farmboygaming1381]

Love it! Love seeing the mix up in content and seeing you show your truck more and such a thorough video over engine upgrades. Love seeing these old 2nd gens still running

[@ProjectFarm]

Thanks!

[@randomexcessmemories4452]

Fascinating stuff! I'm personally a fan of upgrading older stuff to push it to its full potential, so I like seeing these kinds of projects! The little box you put in the cabin that allows you to manipulate the engine in real time is super cool (especially the "Let's Find Out" switch!).

[@ProjectFarm]

Thanks for the feedback.

[@simplybeanjelly]

I thoroughly enjoyed this video! I had no idea tuning a mechanically injected diesel was so complex and yet so easy at the same time! It's so neat to see how that all went together and turned such a significant result! Very excited for the next video in this series!

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@teeanahera8949]

There was nothing easy about it. Put one of those springs in upside down or whatever and it could take forever to figure out what’s wrong.

[@juantomas3630]

Smart move having all this work done, it's always good to stay one step ahead of any repairs you need to do !

[@ProjectFarm]

Good Point!

[@jeffrobodine8579]

After 16 years, if is not broken I would not fix it but I am glad you did.

[@ProjectFarm]

Thanks!

[@brianwood5220]

Very interesting video, Todd. I don't drive myself anymore, but I do understand how frustrating it is when an engine just won't perform. I've done my share at cursing at them. Looking forward to seeing the transmission changed and seeing what improvement all that money spent has made. I bet it's worth every dime. Thanks for sharing with us and have a great week.

[@ProjectFarm]

Thanks and you are welcome!

[@Sylvan_dB]

Great project. This is a big change compared to the small engines from a few years ago. 😁 Can't wait for part 2!

[@ProjectFarm]

Thanks!

[@rydplrs71]

3:05 power smoke…🥳 Shots fired

[@ProjectFarm]

lol. I had to have some fun with this video!

[@davidzigrang7924]

I watch and I’m a loyal customer of Power Driven Diesel I had just seen the video PDD did showcasing your truck it was a good video to see all the upgrades done on your truck, then I went to your channel to check it out and the play by play you do is amazing, thank you for that keep up the great videos David

[@ProjectFarm]

Thanks, will do!

[@Bdub1952]

Does it perform like a new truck? It sure looks like you attained that goal, and saved ~$90k in the process over a new truck! Very impressive!

[@stephenpennington7041]

And he doesn't need a dpf or diesel exhaust fluid.

[@joshhassler]

​@@stephenpennington7041spend 2k and you wouldn't need it either on a newer truck

[@mikebarnea4789]

​@@stephenpennington7041and if shtf he'll have a truck that will still run

[@sebastianfrankowicz2744]

I can actually hear that "Very impressive" from all the videos.

[@eternalbeing3339]

That truck has a million mile motor. Old school mechanical diesel. Made to last.

[@gm7542]

I also want to chime in and say I enjoyed this video from you just as much as your regular videos. I encourage you to venture into different types of videos and other collaborations! Collaborations are always fun to watch

[@ProjectFarm]

Thank you so much!

[@artillerybuff2000]

Wow! Looks like you basically doubled the horsepower, and more importantly, the torque. Very impressive. Those numbers are close to what my 2018 6.7 Cummins makes. I wonder how long the engine will last putting out that much power?

[@TehButterflyEffect]

Should last a long time still. That engine is choked to crap from the factory. A lot like our 6.7 diesels are... except now it's because of emissions stuff.

[@BruceLee-xn3nn]

Longer than anything new. My employer bought brand new KW T880 last year with x15 Cummins and it broke crankshaft in two with only 24,000 miles on it. We have several trucks with Paccar engines and Cummins and all new and always got problems.

[@johncooper4637]

There is a marine version of the engine that puts out 300 HP stock.

[@AbsolutionArmament]

It will last, there are people out there making more and they are still running strong as a work vehicle. Then you have mine which is not a work truck I've had for 9 years and daily drove it. Most of it's life to me had a 72mm single, 5x016 injectors. The bottom end is still stock and it's still a runner.

[@Low760]

​@@BruceLee-xn3nnthat doesn't happen on Australian Kenworths with the x15

[@Hazardous-Hotrod-Knowledge]

This is not the crossover I was expecting but it’s a welcome addition!

[@ProjectFarm]

Thanks!

[@bpcurry4143]

Sir, blessed me with string trimmer. I really love that thing. I can't get something like that in my country and love your contents, always enjoyed watching it. Keep it up 🙂🙂

[@ProjectFarm]

Thank you very much!

[@operator8014]

Well if the channel is heading this direction, I'd like to see a test of locking differentials. I've had a eaton-fuller e-locker on my '76 K30 for about 12 years now and I'd like to see how the other options compare to it.

[@jefweb5043]

One of the best videos you've done!!! Great collaboration... excellent content!!

[@ProjectFarm]

Thanks!

[@Parents_of_Twins]

My two favorite channels combined, got to love it. Guys at PDD are awesome I called them when I was getting ready to buy a new to us diesel pickup and asked for their recommendations and they were super helpful.

[@ProjectFarm]

Thanks for sharing.

[@sicstar]

Wow that was unexpected! Much appreciate your effort you put into all your videos and this now was a treat! Great upgrades and keep it up! Impressed as usual and hyped for part2 ! :D

[@ProjectFarm]

Glad you enjoyed it!

[@sicstar]

@@ProjectFarm So far every single one i watched! 🤌👌

[@Hybris51129]

It nice that you have reached the point where you van treat yourself to a upgrade and be able to share it with us. I would also consider checking on the health of your differentials and transfer case just to be sure they can withstand the sudden boost in power without shearing gear teeth.

[@gth042]

Good one. Get that factory tar out of there if nothing else.

[@cavan1979]

I'm on the team of people that like the addition of videos like this. I value all of the reviews, but definitely enjoy this as well as miss some of your old content like lawnmower torture. Thanks!

[@ProjectFarm]

Thanks and you are welcome!

[@kurtisb100]

I was confused the whole video about all this engine work; I felt like I must have missed the transmission upgrade video earlier. Then I got to the end and it all made sense…. You can’t unleash the beast of a P-pump Cummins without a new transmission! Nice build. Love those old 12v Cummins.

[@ProjectFarm]

Thanks for sharing.

[@CorruptedPlist]

Hey this is a really good before and after video! It’s super cool to also have input from the professionals that do this for a living and making sure whoever is watching gets all the tips if it’s their first time working on a Cummins.

[@ProjectFarm]

Thanks and you are welcome!

[@cohenwolfe3730]

Really love the video!! Can’t wait for part two! Been thinking about updating the old work truck. I’ll wait for all the results! Take it easy ❤️

[@cdnmember]

Kudos to the folks at Power Driven Diesel. IMO “do not try this at home”. Very impressed with the body condition of your 16 year old truck. And yes, you did get your monies worth!

[@creak92]

16 years? You're off by more than 10 years, a 96 is already 27 years old which makes this even more impressive tbh. My winter truck is a 86 and definitely benefits from regular oil based undercoating as it doesn't really rust anymore after I've welded in lots of fresh steel to fix the previous owners neglect. But it could need an upgrade as well, it's way slower than Tods truck in stock form :D

[@cdnmember]

@@creak92 at 0:17 he clearly says he has had the truck for 16 years.

[@ProjectFarm]

Thanks for the feedback.

[@creak92]

@@cdnmember "I've had this old 1996 Dodge for over 16 years", you can buy trucks used instead of factory fresh after all.

[@LisaMedeiros-tr2lz]

@@creak92 Which obviously means he was not the original purchaser and did not get the truck new. He let someone else take +10 years of depreciation before he got it. That was smart. Now he is making upgrades to bring it to modern levels of performance to a fraction of the cost of the new truck. Also very smart. Now is has upgrades to one of the most revered motors in terms of reliability, and one which does not suffer from all the annoying EPA required crap that makes the modern truck unreliable (DPF and DEF). Also smart!

[@scottmccoy4129]

One of your BEST videos! Great idea to work with PDD and great execution of this video. Your rapid narration style really put this job in perspective.

[@ProjectFarm]

Thanks so much!

[@andycrips]

I'm curious how reliability and drive ability will be affected? I'm excites for the next video!

[@ProjectFarm]

Great point! I'll include more of this information in part 2 when I personally rebuild the transmission to handle all the extra power.

[@duanebuck193]

Excellent video, Todd. I've wondered about upgrades to Diesel engines (I have a 250hp Cat in my Pusher), so seeing the various steps being taken gives a lot of useful information to keep in mind if I should ever decide to go that way as well.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@Zer0_Smith]

Fantasic video as always. Great to see when someone improves their engine the right way, and breathes new life into old parts.

[@ProjectFarm]

Thanks! Thanks for the feedback.

[@sirsardine1]

You should test dishwashers! I just bought a $300 Amana unit on sale (works just fine) and I'm wondering how it compares to more premium units. It would be really interesting to see a comparison of performance and efficiency. It seems like no one else has made a video like this, but I know I would definitely watch it. Keep up the great work!

[@ProjectFarm]

Thanks for the suggestion.

[@dustinstroh4604]

A couple weeks back you asked if you should do more than reviews. Yup! I like how you partnered with another team, but kept the channel yours. I am sure your straight forward voiceover saved me from hearing all sorts of unnecessary conversation about these upgrades. I love this!

[@vorteco7692]

This video is Exhibit A of why the older 12 and 24v Cummins trucks are so expensive still to this day. They provide 75% of the performance a new (less than 5 year old) diesel truck for 1/4 the price.

[@thecloneguyz]

Just wait till people start realizing that the Mercedes om647 was the only million-mile motor ever invented and there's a reason why it goes a half a million miles and it still sells for $20,000 2001-2004 Mercedes Sprinters

[@ProjectFarm]

Thanks for the feedback.

[@ryanmaggard6548]

Love this type of video, definitely would love to see more of them on the channel! My dad and I always watch your videos together. Maybe in the future, could you do a test of best crowfoot wrenches? Anyways, thank you as always for the awesome content!

[@ProjectFarm]

Thanks! Thanks for the suggestion.

[@dangareau]

1: Change your battery "crossover" cable. They corrode inside the insulation and cause the passenger side battery to boil over because the Cummins charges the passenger side battery but tests battery voltage at the drivers side. That STUPID WIRE took out my turbo, A/C, and everything that you're replacing. 2: Absolutely loving this as I'm literally washing anti-seize off my hands (getting a snack) about to bolt my new turbo on my 2006 5.9 Ram 2500 as I'm fixing the problem that I just spoke about. 3: Thanks for saving me tons of money... and for all your videos. Love the integrity. PS: The bolt trick is magnetic heat induction guns. Best money I've ever spent on tools for rusty diesel trucks. Buy a cheap one online ($250). Works better (and safer) than oxy/acetylene and looks like magic.

[@ProjectFarm]

Thanks and you are welcome! Thanks for the feedback.

[@luisillo1987]

I wait all week for this. Thank you sir.

[@ProjectFarm]

Hope you enjoyed it!

[@luisillo1987]

Definitely, now I want a let's find out switch on my vw passat it is a diesel.

[@logresmentotum7065]

I wondered what this would be like. You never disappoint, Todd. Well done, once again! Brake system?

[@daryllsmith5592]

This is awesome. Direct to the point and filled with everything you need to go. love it!!!!

[@ProjectFarm]

Thanks!

[@longboat4726]

Now you need to add an OBDII ELM 327 dongle and get the OBD JScan app. That app will let you make more custom changes, although it is geared toward more modern Ram/Dodge/Jeep products. Interesting story: had a 2011 Ram 2500 work truck that had a button on the dash to let you run "light load" mode. This let you drop tire pressures to 65psi front and 45psi rear when not towing or running heavy. This allowed the truck to ride like a 1500. The button re-adjusted settings for TPMS warnings. Ram got rid of this feature after a year or so, likely due to idiots forgetting to air back up prior to towing/hauling. However, the JScan app brings back that functionality! Of course, if your truck is pre-TPMS, you can just adjust pressures (and subsequent ride comfort) as needed.

[@g.e.fourie5672]

Keep up the great content. Would love you to do a test to see if it really is so bad to mix different types of oil. Synthetic with regular etc.

[@everettstormy]

I always mix oils and ive never had a problem. I think its mostly false aside from certain things

[@ProjectFarm]

Great suggestion!

[@Gillespie91]

Do you know how many miles per gallon the truck was getting before the upgrade and after? I was curious to see how much better or worse it was after the upgrade.

[@lanceuppercut6168]

That would be interesting to know. Hopefully he includes it in the next vid :D

[@Gillespie91]

Yeah or sees my comment and let's us know.

[@DiaKK]

I know you have been hesitant to do stuff out of the normal testing you do but this is great. Just keep up with this good quality of videos and i will watch anything you upload!!

[@ProjectFarm]

Thanks so much!

[@LordHolley]

Definitely enjoyed this video, and I like the way you didn't want to do things that created extra diesel smoke, but still got the power out of it. I don't think anybody likes seeing massive diesel smoke puking out in traffic.

[@ProjectFarm]

Thanks!