How We Built the Ultimate Cammed / Supercharged NBS Silverado Street Truck

[@RipRider916]

That truck is perfect for everyone. Not overdone not under. No stupid high gloss paint with horses airbrushed into the tailgate. Just a manly truck. Good job.

[@AZProPerformance]

Thank you!

[@mikeh1348]

Where can I look at info for my 2002 Silverado

[@cakeboy004]

This guys is talking about 20 years ago with those airbrushed horses 😂

[@hondaservicecenter]

Bro jst wanted to be racist

[@dogsandwich-b2r]

@@hondaservicecenter nothing to do with race lmao

[@Chase.bachler]

Easiest way to get the bolt out instead of dropping the gas tank is to cut the bolt and then install a new one facing outwards. Saved me a lot of time

[@_projectbuild]

Weight reduction😎

[@oceanwaves83]

Which bolt?

[@Chase.bachler]

@@oceanwaves83 the leaf spring bolt

[@oceanwaves83]

@@Chase.bachler ahh true. Thanks

[@1320sbc]

I did almost the same setup in my 05 a few years ago but 4.8L with a 2300 magnuson made just over 500 to the tire was my favorite daily wish I kept it that way

[@AZProPerformance]

I am hoping to get closer to 500 when we get up to 9.5 pounds of boost.

[@1320sbc]

@@AZProPerformance I have a new RDS spacer for that blower when you turn the boost up it helps a lot. I was going to set it up for meth injection under the supercharger lid so it doesn’t hurt the rotors but I never did before I sold the setup and went turbo. If you want it shoot me a DM you can have it

[@AZProPerformance]

@@1320sbc Awesome man and really appreciate that! Message sent.

[@JonTheDestroyer]

I wish you did too

[@seanspade951]

Y’all seem super knowledgeable I just bought a 4.3 I plan on doing a swap to the vortec 5.3 how well do these motors hold a charger? Y’all get any longevity out of yours or were y’all just racing it?

[@jerlaine1638]

Love those rims and shes perfectly lowered!! I've been debating on redoing the lowering kit on my truck and this just sold me

[@tunezZz01]

Takuaches in the comment section: “take notes cuh” 😂

[@DRGRACING]

🤣🤣

[@chuy2093]

He needs them traction bars so he don’t wheel hop

[@lambobroaventador6711]

Exactly what I’m doing cuz I got an NBS 2004 with the 4.8 😂

[@Jim-xj9se]

So glad to see the NBSs getting some love. I've been wondering what to do to wake up the 4.8 in my RCSB 01 Sliverado!

[@spencerharnedharned7211]

@@jason3211 R.C.S.B.- Regular Cab Short Bed/Box

[@Chase.bachler]

Find a 6.0 and swap it in. Ask me how I know lol

[@demarcusbody9437]

Boost it the 4.8 has some of the best rods for boost you’ll love it man

[@kel_bandz8462]

Cam it, bigger injectors, throttle body spacer, long tube headers, some new heads, let that thing breathe

[@demarcusbody9437]

@@kel_bandz8462 a men brother

[@SauceProphet]

Sweet Truck Build guys! I just bought a 03 sierra on saturday and cant wait to get some parts from you guys. Im in cali so the go fast will be a bit tough but everything else will be great!

[@_projectbuild]

Just bought a Silverado recently too. Good luck with your build! I hear it’s getting rough in Cali

[@RETSZTIRF]

He's right that really is the truck sweet spot.

[@ThatGuy17371]

What a great truck. i had a crew cab version a few years back and this was the end goal before i went stupid and bought a jeep. i still miss that truck.

[@Silverado5.3]

Very cool. Can't wait to get some things done on my C10 Squarebody

[@Nolepower]

Man I'm jealous lolll. Wish I had the money to drop in my 1999 shortbed silverado. One day though. Thanks for the inspiration bro.

[@anthonyharris7817]

I need a great mechanic like you guys.

[@2finger-Carmine]

It doesnt have everything you need... It has everything you want 💪🏻

[@trentdawg2832]

Ok bill carlton

[@harleyray2152]

THE MOTION OF AMERICA in “The Heartbeat Of America” font!!

[@HaroldjUSMC]

Truck is fire 🔥. I’m doing my step dad old GMC Sierra 1500. Right now just put Flow masters on this week

[@goskidmark]

I would have added a new set of roller rockers and matching springs to eliminate the excessive wear to the valve guides (and entire valve train) that high-lift cams cause on the Gen 3/4 motors.

[@_projectbuild]

Good tip! Gonna try to remember this for my build as well.

[@rolandgutierrez813]

wow , that is amazing and so awesome that you did NOT have to butcher and cut the frame to get a Lower stance , very nice ,and you have all the strength of the frame too , can you post the model of that drop kit you did on the rear please , thanks man , love the look , great job ! i want 1 of those super chargers uggg

[@JonTostanoski]

They make it seem so easy. Or maybe it was because I did mine in my drive way and turbo it.

[@garrettwoodard7834]

I’ve been drivin a 2003 GMC Sierra 1500 single cab for 7 years

[@whoisthis4130]

This is perfect and almost exactly what I want to do with my RCSB.

[@Sandhills_Coyote]

I love it! I just picked up a 04 yesterday will be doing something similar but probably a turbski. Cool little pickup!

[@AZProPerformance]

Thanks!

[@SSANCHEZZ_505]

I want to say the rotors are directional and I thought I seen one on the wrong side. I'm not certain tho. Sweet build I want to get a street truck project started

[@AZProPerformance]

Thanks! Rotors are directional and do have them on correctly. Most guys think the pattern goes the other way, but indeed it is correct here.

[@joer5057]

At 11:18, buddy definitely had the driver's side rotor on the passenger rear, lol. You can see the "L" on it, and after the cut-away shot, you can see the pattern is reversed. Good catch though, I've seen guys run them backwards and not even realize it

[@SSANCHEZZ_505]

@Joe R thanks man I didn't even notice it switched after it cut away haha

[@OfficialTWINKY]

Badass little truck I want one now 😂

[@elihamou6902]

2wd is great for a daily. Handles well, good mpg, and hauls ass!

[@SkarryTerry]

Could have left it the way it was and it's still PERFECTION. Every man would agree.

[@MemphisTruckMafia]

That’s nice I see some future mods for my turbo daily single cab build!

[@bigjimsgarage31]

Do you guys remember what texas speed camshaft and valvesprings were put in the truck?

[@mrogersgmt800]

Love the set up! love the truck overall awesome work and video. 👌👍👍 I own 2 of these short beds 04 sierra and 00 Silverado both with the 4.8s beautiful rigs. Always fun to wrench on!

[@red01rado19]

Could you do a complete parts list on this?

[@eleazar7962]

Awesome NBS daily 💪🏼

[@Pragmatist1st]

Coilovers are my now my next project on my NBS..... Also, get you an HD hood (will need a little work around the headlights, but easy and worth it).

[@MemphisTruckMafia]

I’m definitely putting coil overs on my single cab turbo nbs build now once I get it running which is soon

[@Hoosier81]

Would’ve liked to seen how you ran the exhaust

[@tareese78]

Awesome wish you guys could work on my obs love the work you guys do

[@ShooterMcgavin6]

How do those leafs effect towing

[@bnjmnnbl]

Truck came out pretty clean Travis! Might go this route myself one of these days!

[@AmericanAutomotive1]

Beautifully done! I recently LQ9 swapped my 05 with 222k and have already been getting bad ideas floating around my head of...um...let's call it an intake manifold Vacuum elimination kit 🤣

[@billyp4674]

Love this truck ... Make an update video on this plz !!

[@AZProPerformance]

Thanks! A good customer actually ended up buying the truck and is enjoying it!

[@93rodeo58]

Immediately a new truck once it was lowered 🔥

[@rippenxwhiskey4358]

I have a clean 2001 silverado, i dont want a turbo on it, but i do want a super charger preferebly a twin screw, which one would work with my 5.3?

[@Kevin-us9yv]

Exacly my truck same year same cab same everything I love this truck

[@Kevin-us9yv]

update I sold it 2 weeks ago

[@Yeeeeeeeettt]

I didn’t see any mention of a c-notch, did it ever bottom out? Looking to do the same but was wondering if I should order the c-notch at the same time.

[@krazylilalejjjjjjjandro4li527]

I NEED THE REAR END DIFFERENTIAL DONE TO MY 2011 AVALANCHE

[@jasonnellis3566]

hello when you removed the overload spring how did it ride

[@mikeodell5915]

Great video

[@AZProPerformance]

Thank you!

[@chrissmith724]

Great stance! What about wheel backspacing? How much offset ?

[@AZProPerformance]

They are off the shelf DUB wheels and believe its a +30. Its a 20x9.5 wheel.

[@wilmillah]

@@AZProPerformance are these 20x9 or 9.5? i can only find them in a 9.5 wide for 22”

[@AZProPerformance]

@@wilmillah They are 20x9's. Give us a call, we are a dealer and can get them. 480-420-8175.

[@chesspiece81]

Why not look into the 2019+ Silverado 4 piston calipers, or the C6 ZR1 calipers on the front and C7 Corvette calipers on the back? I've got a Brembo BBK on my Yukon and am going to do the C7 rear calipers. I got the Brembo kit before I knew about the C6 ZR1/2019+ Silverado calipers.

[@pedrot9067]

What does it take to install a 4l80 in place of a 4l60 do you have to program the ecm?

[@birds000]

tryna do sumn like this in the summer

[@cashwrldtyy]

Gotta 01 same truck instead it's a step side i wanna build mine just like this 🔥

[@ThorntonFitness]

How much would something like this run to have done? I’ve got an 01 5.3L & would like to get something similar.

[@schmokeone]

Do you have a link to the lowering leaf springs?

[@AZProPerformance]

We don't as we dont recommend the drop leafs. They ride very stiff. We later switched to a drop shackle and hanger, and although more work, it is worth it. azproperformance.com/collections/99-06-silverado-coilover-complete-kits/products/pro-performance-2-4-drop-w-coilovers-99-06-gm-truck-suv

[@gs8602]

Great Look!

[@chasecoster8791]

First time I’ve seen someone on KZbin put coils in correctly. Everyone just tried to compress it to put it in

[@_projectbuild]

When you start to compress things when working on your car tensions get real high😬

[@HardWorkpaysofff]

I have a 4.8 rwd ext cab that I’m trying to convert into a ss clone 6.0-6.2 haven’t decided ? What should I expect in a complete build ? Could it be done for 10k??

[@johnjohnson3783]

Perfect stance, I'm gonna have to copy tire size and drop. I need tires, and have the same truck, other than a 408 stroker, I've thought about a blower, but already a handful. Big thanks, it's just the way I want mine to look

[@viivcreations9161]

cheaper and better than 2021 models :)

[@ivanjimenez8868]

How do the lowering leaf springs handle corners and dips?

[@DaBuGzLiFe]

Needs something for that damn wheel hop.

[@AZProPerformance]

Yep! Our next KZbin shows the install of traction bars from Speed Engineering.

[@DaBuGzLiFe]

@@AZProPerformance Yes!

[@jasonnellis3566]

Truck looks awesome. How wide was the rim you used.

[@SamSheepDoq]

What throttle cable bracket did you use? I need one for mine

[@fredbonez1803]

If you build the 4l60 to a stage 4 would it hold up ?

[@garybensel6680]

I was under the impression you had to pull the heads to replace lifters on this engine?

[@masont7408]

I always go to Cordes good guys!

[@jrdelgado56]

Whats the part # on the rear qa1 shocks?

[@AZProPerformance]

azproperformance.com/collections/99-06-silverado-shocks/products/qa1-rear-double-adjustable-shocks-99-06-gm-truck-suv-td905 We sell them right here.

[@not2old4watts]

I’m looking to do something very similar on a ‘01 Silverado with a 5.3. What’s the turnkey cost for this total upgrade?

[@herculesworld4016]

Wheels look awesome. Great Job on the build. I have an 02 Tahoe and I fell in love with the way those wheels look. Are those wheels Dubs S205 LUXE? Thanks 💯

[@joshuashelton7313]

how do you get it to sound that good it sounds amazing

[@AZProPerformance]

Thanks man! I agree, and one of the best sounding trucks I have owned. It is a Texas Speed cam and Speed Engineering long use headers with their exhaust / mufflers.

[@joshuashelton7313]

@@AZProPerformance i heard one last week it was a 2010 chevy silverado i want my truck to sound like that

[@xXNolanRyan34Xx]

Can you do the same lowering kit on a 4x4?

[@AZProPerformance]

Yep, sure can. Give us a call.

[@xXNolanRyan34Xx]

@@AZProPerformance looking for a truck at the moment but you’ll get a call once I find a truck to build !

[@codydonovan7356]

Those wheels look perfect. Where did you get them?

[@AZProPerformance]

Thanks! We sell them.

[@dboyfresh]

What's part # on rear shocks,link doesn't work to yalls site

[@AZProPerformance]

They are $380 for a set. Give us a call and we can get them for you. Or here is the full set link. azproperformance.com/collections/99-06-silverado-shocks/products/qa1-complete-shock-kit-99-06-gm-truck-2-4-drop

[@AZProPerformance]

azproperformance.com/products/qa1-rear-shock-kit-99-06-2wd-gm-truck-2-4-drop

[@slopolopez7741]

Great video!!! So it was five g's for the truck... And how much for labor and parts? Asking for a friend.

[@TheRcdude34]

Did you guys rebuild the internal of the motor at all, I noticed the odometer had like 250k. Solid truck tho I love it

[@AZProPerformance]

It was a 1-owner truck, so very clean. However, it already had a Jasper rebuilt 4.8 in it, with 10k on the odometer.

[@davidsharp922]

Most of the race trucks we build are 6.7 litre or larger stroker motors. There is no replacement for displacement.

[@AZProPerformance]

True, we are always fans of larger displacement, but we wanted to see what can be done with a 4.8 engine. Keeps the budget a little better! Thanks for watching.

[@davidsharp922]

@@AZProPerformance the 421 Ls we are fixing to put in a chevy truck will produce right around 700 horsepower. No turbo to get that power. It will have a nitrous system good for 200 to 300 hp more. It will smoke a 4.8 with a turbo no problem. Of course these aren't budget builds nor anywhere near the most expensive but really powerful tough motors.

[@AZProPerformance]

@@davidsharp922 I like what you got going on!

[@davidsharp922]

@@AZProPerformance my buddy at the shop likes to build trucks. Big motors,4l80e transmissions and 14 bolt rear ends. The one that is getting the 421 is going to be full race mode. He had a Fairmont with a 408 and 400 shot of nitrous that ran the 8th in 5.2 seconds at nearly 140 mph. Trucks are heavy but that's what he wants to build.

[@Kritzeon-_-]

i was wondering can u do a 87 chevy short wide. i really want to see that build

[@thardrick96]

How is it LS swapped if it has one from the factory?

[@AZProPerformance]

It was meant as a joke, saying it’s factory LS swapped. 👍

[@MikeSmith-mp7lf]

Kinda late with my reply, but I have the exact same 1.9L magnuson supercharger with a BTR stage 3 truck cam, and TCI 2800 stall converter and I made 573 at the rear wheels. I recommend you check the duty on your injectors and the fuel pressure at your blower. You dont seem to be getting the power out of that blower that you should. Granted I have a 5.3 in my Silverado, but that's to much of a gap in power. You're basically getting crank horsepower at the wheels and that means only a 8-15% power increase from the blower. Also, PULLEY UPGRADES!!! Seriously. But if you're pleased with your results, by all means ride out. I'm not bashing your truck or build by any means, I just think you can get much more power than you are getting from this build. One last thing, what heads are you running on the 4.8? If I remember correctly, there was 2 or 3 castings that were horribly restrictive and that is the best way of unleashing extra ponies with forced induction. Oh! And 1 7/8 long tubes! Forgot about that one. Have fun. Nice build and like I said before, just some suggestions to maybe help you get a little more power.

[@AZProPerformance]

Appreciate it! In the video we do make mention up downsizing the pulley, which we did later and got more power. This was only about 5.5 pounds in it, which is light. We down-sized the pulley, more boost and re-tuned before the new owner got it. It has been doing well now.

[@MARKC0R3]

What mpg does it average?

[@Dallas28-]

Pure performance 👏 🙌 👌

[@champ_dios]

Where can I find the exact wheels and tires?

[@AZProPerformance]

Just give us a call or email us ([e-mail]) and we can get them for you.

[@PeterHatch-mx7zc]

Where did I buy the big brake kit thks

[@AZProPerformance]

Right on our website! azproperformance.com/collections/99-06-silverado-brakes-1/products/pro-performance-revelator-big-brake-kit-99-04-gm-truck

[@jeremyellis7364]

What’s the driveshaft situation with the 4L 80 swap? I am assuming the 4L 60 driveshaft can’t be used.

[@AZProPerformance]

Correct, we had it shortened.

[@urielortiz2529]

how's the 5.3 with the same setup

[@jaimetoss9263]

what exactly did you do to cam it? and how much would it cost

[@AZProPerformance]

We just swapped the cam. It runs about $2,500

[@MK300ZX]

What cam?

[@angelcortez9454]

What the specs on the coil springs? What spring rate and length did you choose?

[@AZProPerformance]

They are direct fit for the truck from QA1. azproperformance.com/products/qa1-front-double-adjustable-coilover-kit-99-06-gm-truck-suv-gd517-10650c?_pos=1&_sid=320b384a8&_ss=r

[@allensmith3178]

How much did you spend on everything

[@Hoosier81]

How much is that brake kit?

[@mikeh1348]

How do I get info on the brake system for my 2002 Silverado

[@AZProPerformance]

azproperformance.com/collections/99-06-silverado-brakes-1/products/pro-performance-revelator-big-brake-kit-99-04-gm-truck

[@Conker999]

Nice i have an 03 cateye with an LS3 at 480whp

[@jeepguy1337]

That black Silverado ss in the back

[@06jj28]

I was thinking the same shit.

[@UnsupervisedChaos_ATLBZ]

Says the brake kit won't fit on anything newer than 04 but why not an 06?

[@AZProPerformance]

Hi. It is because '06 has drum brakes in the back, as this is for trucks with disc. Unfortunately this kit doesn't work as a drum to disc conversion, rather an upgrade to the existing disc setup in the rear.

[@ericringler608]

Killin it!

[@dakosyoutube6232]

How many days did it take for you to get this truck built? And how much was in?

[@blacklight4460]

Since you you're already giving up practicality with the reg cab and you have the stout 4.8l, why not increase your boost pressure to make it more crazy and less practical?

[@jeremyeubanks2387]

What was the torque?

[@codydonovan7356]

Imagine if you put a equal length Vette style exhaust on it!

[@King_Maxx7]

Were you located I wanna build my dream truck just like that..

[@AZProPerformance]

We’re in Mesa, AZ

[@Candyvyorn_]

How big was the stall in there

[@AZProPerformance]

3200

[@Candyvyorn_]

@@AZProPerformance how’s it do on the highway? Is it always downshifting?

[@AZProPerformance]

@@Candyvyorn_ It does great on the highways other than RPM's a little high, but knew that would happen with the 4.10's. Doesn't;t down shift much at all, since it at 3k doing 80mph.

[@petepeto9335]

I want my 2002 silverado 6.0 2500 to make 600-700whp.. everyday reliable truck. Can my stock truck make it?? Just supercharger... Need to upgrade parts??Heeeelp 😅

[@ed-ou812]

I have a restored 1997 4x4 suburban with a 5.7 vortec crate. I wish to install a cam and supercharger. What transmission and rear end changes would you recommend?

[@AZProPerformance]

I would do a 4L80E and a good Posi unit in the stock rear end. You can build the 4L60 to handle the power increase, but our opinion is to just skip that, and go right to the stronger 4L80.