PTO Killer Dowel Pin Takes out Kevin's Case IH MX90C Tractor

How to fix a PTO dowel pin in a Case IH MX90C!
Subscribe: @DGHD | Merch: debossgarage.com/merch
Watch next, "Everything Wrong With A Case IH Maxxum MX110" • REVIEW: Everything Wro...
0:00 PTO killer dowel pin
1:49 PTO housing disassembly
8:56 Clutch removal
23:03 Reassembly
34:31 Will it spin?
Follow us:
debossgarage.com
/ debossgarage
/ blackjackdeboss
/ debossgarage
/ debossgarage
Send stuff to Filthy Rich
411 Darling Rd, Canfield, ON Canada N0A 1C0
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I use: www.amazon.com/shop/debossgarage
Show us your build project: debossgarage.com/nation
Help us make awesome stuff: / debossgarage
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About:
From Tractors to Heavy Equipment to Industrial Machines, DGHD will show you how to build, operate, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
© Red Egg Entertainment | made in Canada
--
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE HEAVY DUTY ("DGHD") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DGHD specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DGHD recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DGHD assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DGHD.

[@stubbi]

Love that Kevin does his own videos here on this channel. He's got some great humour and attitude.

[@jagharingenyoutube]

And skill

[@mikescott1307]

Kevin is a very likeable guy that obviously has a lot of seat time and tooling around as farmers do. Good chemistry between him and Rich. It's never boring.

[@HANKTHEDANKEST]

More Kevin content is always welcome, farmers are the original "F that, I'll fix it myself" dudes. There ain't no time for downtime!

[@jesseleesamples]

Honestly these videos have made me respect farmers even more. You have to be a damn good tractor mechanic to be a farmer it seems. Also Kevin is just the epitome of a do-it-yourself farmer who fixes anything and everything on his farm and isn’t afraid to tear apart anything even if he’s never done it before. I admire anybody who’s not afraid to tear something completely apart even though they’ve never done it before. I’m sure not all farmers these days can fix their own stuff like he does.

[@joegee2815]

Let's all agree that Rich and his team have nailed the videography. These are beautiful videos. I'm never rebuilding a tractor PTO gearbox but damn, it looks good on video. And I love the insight to the life of a farmer. God Bless ever one of them.

[@hagggle3727]

Can’t explain how enjoyable I find Kevin’s videos. Seems like such a solid, salt of the earth guy who always seems to be in a great mood no matter what he’s dealing with

[@RpgedSniper]

Thank you guys for showing the troubleshooting steps, most people wouldn't go to the effort and show it. Kevin and rich have great chemistry and make great videos together.

[@andrewduff4719]

Always enjoy seeing Kevin best part is he likes the Red stuff just like me!

[@marscruz]

Love this stuff with Kevin. Such a good friend and awesome dude. These two guys are lucky to have each other to help when something takes two heads and four hands to suss out and get working again. Kevin reminds me of a friend that moved to Brazil because he needed to find his purpose and couldn't find it on the left coast of the US. Excellent work. Great mentoring.

[@DGHD]

Surround yourself with good people, you are the average of the 5 people you hang around with most

[@XRoadxRunner]

Enjoy tractor and farm machinery videos with Kevin.

[@alex4alexn]

i laughed too hard on the "is the john deer oil green?"

[@farmerbill6855]

Moral of the story? If you want red tractors, buy two, you'll need the parts... Great video Rich, good to see Kevin. Best regards from Indiana, USA.

[@keeganpock864]

Unless it an ole IH

[@AA-tb4ff]

@@keeganpock864 ya green ones aren't much better

[@sstroh08]

I know you're kidding, but honestly, as long as it makes sense having two tractors obviously haha, it's really nice having two of the same tractor for this reason regardless of brand. We have 3 sets of the same tractors and this has came in handy many many many times haha. Although, Deere guys don't know how to work on them and just call the dealer anyways right? Haha just kidding

[@hokie9910]

Whatever has a Cummins in it is what I’ll take.

[@matthewb8229]

I could listen to Kevin talk all day.

[@brucejohnson6398]

Kevin always worth a watch. Natural teacher.

[@bmw1894]

4:13 Really a Welker Farms reference? Poor Leg Arms.

[@kozy41]

lol, I got that too😂

[@BiggusDickus2]

It's Fat Ass now.

[@JohnSmith-ud9ex]

Quick tip for a gasket scraper is to flatten the end of a piece of household plumbing copper pipe, work harden it a bit then put an edge on it. Comes with handle installed unless you are really dumb or tight.... Brilliant for aluminium faces as it can`t "nick" like a steel scraper can = )

[@kennynelson2269]

I believe kevin can fix just about anything.. great job.

[@malcolmobrien1008]

Great to have agri tractor repair vid back … luv it

[@DGHD]

A few more on the way

[@UncleManuel]

"Hey, I don't wanna break my arm!" Scott Welker heard that! 😁🤟

[@lordcaptainvonthrust3rd]

Always good to see Kevin teaching Rich new skills 😂 And the honesty of the channel rather than just editing it so stuff works the "first" time Nice one guys 👍

[@paulmartin8212]

that gasket remover is good stuff. getting high, butterflies falling off the ceiling. they don't sell that stuff anymore. you guys crack me up. that was funny.

[@millerbeer8743]

From one new quality video to the next. That's a great way to pass the time.

[@trevormansfield6495]

Really enjoy the tractor repair videos. Kevin’s a great guy. Obviously very knowledgeable

[@DGHD]

Spent a few years working at local case dealership

[@jimmyg5408]

Wondered if he had a some experience knows his stuff

[@matthewgray3375]

Love the kevin content, he farms with similar machinery to us. Keep the fan belt adjusted, that effects the signal in the w wire that effects the pto too

[@Drmcclung]

I can't name-drop the brand but the 3-minute oven cleaner that comes in the yellow can does a damn good job as a gasket & very hard carbon stripper in place of the stuff you can't get anymore, garbage literally just falls right off metal. I keep 2 or 3 cans of that stuff on hand at all times. Total time saver, great tool to have around. Has a ton of sodium hydroxide in it so wear gloves and a mask so it doesn't gag you out of the shop

[@Modlendingen]

Great to see a new vid with Kevin and what he's up to :) And also some nice good to know information on top is quite nice :) Hope we will see more videos from Kevin's shop soon :)

[@larrydavidson3402]

You two have such a great attitude.

[@GeFeldz]

Kevin is such a natural in front of the camera =) I wish i had a neighbor like him!

[@FauxPro2023]

At first i wasn't sold on kevin, but now i get excited when i see a kevin video on my feed!

[@MattLaw-cn7ww]

Good to see some yellow tools like us common people use.

[@Adam_Poirier]

Them damn killer dowel pins are everywhere haha

[@LarryYaw]

Kevin is so freaken amazing! I love watching him work. Kevin please start your own channel. I think most of us would watch it.

[@frankmcgorman962]

According to the MSDS I found, the main ingredients in the CRC Gasket Kleen are acetone, methylpyrrolidin (another type of solvent) and liquefied petroleum gas (propane). You're probably familiar with acetone and it can be found in most hardware stores. The Gasket Kleen looked similar to the foamy oven cleaners. That stickiness might be the advantage it has over straight acetone. I wonder if the gel type furniture strippers would work the same, since acetone and toluene are also the main ingredients in the premium brands.

[@golfbravowhiskey8669]

Man i used to run three-point stop grinders 20 years ago and I would use the large barrel type on my case Tractor , I broke the PTO shaft off inside the tractor twice after that I changed to John Deere, done the same thing. Then about 15 years ago I just went and bought a Vermeer sc60tx that machine today which I purchased new has 5000 and something hours on it other than a few gearboxes and general maintenance it's been pretty trouble Free.

[@hamilton3072]

i am impressed by kevin. All farmers i know do not fix there own things. they dont know how and also many does not know how to maintin the equipment. how does kevin have time to be a farmer on full time aswell as mechanic parttime?

[@jamiequesenberry821]

When we measure precision part from a mill or lathe we let them cool down and then measure them it’s amazing what heat or cold will do to change it a 100 thousands in a part

[@alex4alexn]

these are always my favorite vids, thanks for all the content, cheers

[@incubatork]

Nicely worked out why it didn't work at first, I noticed you changes the left rear broken light glass while you were at it.

[@kiiiisu]

good stuff, more kevin!

[@TechOne7671]

HD all the way. Good craic between you guys always makes it a joy to watch.

[@Kstang09]

Rich, you & Kevin are great for producing this content! Kev is damn near a walking encyclopedia of farm mechanic skills. Keep it up, sir's 👌

[@mattdanger3846]

I did this same job on my MX this past winter. Nice work Kevin.

[@jeremydoblinger3609]

Kevin seems to knw his stuff

[@goldeneaglearbor614]

For anyone wondering, yes you can buy gasket stripper in the U.S. but it's expensive, $15-$20 a can depending on where you are

[@Jaybobhay]

Kevin videos are always good craic lads keep up the great content

[@pminoregon9072]

1-methylpyrrolidin-2-one seems to be the active ingredient in gasket remover. It is one of those really aggressive solvents that dissolves a variety of plastics. The CRC version is only about 25% active ingredient, if there was a better version it probably had more.

[@kerryminigringo]

Same here in Ireland,we had Ambersil GS5 gasket stripper. It would take your skin off with the vapour only but it was some stuff.

[@aserta]

edit: 24:42 contact cleaner for electric cabinets, the gel type that you're supposed to use with a brush will work just fine for that. 23:52 silicone's good, but only when applied by someone who doesn't think you're supposed to use the whole tube of silicone for a 10x10cm gasket. Rolled on sparingly, just enough to make an uniform layer. In typography they have these hard durometer rubber rollers with a checkered surface (for application of paint), they're perfect for silicone. You get a nice clean coat on all your surfaces, let it flash just a little bit, snug it in place, then after it's cured you tighten it and you're set. Like i said, it's not the item, it's the one using it that's the problem. Usually the same person who buys two tubes of silicone because he thinks he might not have enough for a transmission pan is the same person who thinks home foam is a structural repair, is more likely to weld an old box wrench over the crack in their truck frame and has, at least once, used a wood screw with a rubber washer to plug his leaky fuel tank. In this field of operation, we've all met "this" guy. We know who "he" is and how things are ""ok"" under his eye. Joe Average the " " " mechanic " " ", with his catch phrase "that'll do'er".

[@scowell]

Love this farmer-fix content!

[@casycasy5199]

I think your t/s was great.nice job

[@loganfarmer5365]

yo guys try an air hammer with a flat bit on the hose ends. works every time be careull and no damage

[@huntin4life99]

An air hammer works wonders on suborn lines. Good work

[@troyadams1076]

Very interesting 👌

[@wobblysauce]

Yes to the tyre change...

[@mrb1864]

Oh great, my wife gets her fix of Kevin :-) . she'll be happy for at least a week lol . I'll make sure I never buy an older version of the Case lol, doing pins on older design be a bit like being a Punch and Judy puppet master .

[@youbecha64]

Looks like you have to drive to an Oreilly parts in Michigan to get that CRC Gasket Remover...

[@abpsd73]

I remember looking for gasket remover about five years ago, Not available in Canada but for sale in the US.

[@fatusbloke]

Pro tip unbolt hitch pot housing to refill backend much quicker than dribbling it in via fill tube. keep up the good work.

[@These_Old_Engines]

The Welker Farms reference!

[@koreywilliams4570]

Damn Kevin, quit breaking shit 😂

[@GavinY]

Knowing your equipment helps a lot, there's only that many moving parts and if you systematically eliminate one by one, you 'll find the source.

[@SAVAGECUMMINS]

Will an mx series rear cover fit on a 5000 series maxxum? If I was in there anyway and found an mx at the wrecker for cheap might as well upgrade no?

[@gavinwilliamson3944]

If this was a Green Tractor. That solenoid is going bad.

[@lukemeisenbach1964]

Engineers didn't redesign the PTO case to be nice to mechanics. They did it because it was stupidly hard to assemble at the factory.

[@JuniorJunison]

Tomato tomahtoe

[@minnesotatomcat]

Exactly they build things with the thought that it will never need to be taken apart again.

[@diesellivesmatter]

My money is on casting rejection rates

[@howiej4084]

Damn fine how-to video.

[@GTL77]

Did Kevin work for O’neils before? If he did im pretty sure he came out to work on my old bosses case tractor 😂 ive met him once before 😂

[@JamesParus]

Farming is very technical.

[@CrimeVid]

With close-ups Rich, get closer, unless it's a secret !? cain't see a god damn thang !

[@proudpennsylvaniaman7996]

Rick you are one funny s.o.b. I know it's rich lol 😂

[@winkles_9355]

I thought I was clicking on a Cummins video when I saw killer dowel pin 😅

[@prjndigo]

these bent metal PTO shafts will ever so slightly develop a twist that begins to un-screw and push the shaft longer and it can cause impacting wear on the pins if you have a universal joint in the mix

[@brokeaffarming]

As someone with an mx series tractor, this video is gonna be helpful. Hopefully not in a long time, if ever.

[@farmguy2400]

Kevin got his concrete floor done.

[@donvoll2580]

Good day fellows from Kitchener Waterloo. Is that true leaving pto on all time does not worn out clutch? Thanks nice video.

[@PeterLee-zn3jl]

Machinery with massive power...needs a series of interlocks , limits , stop /go , make /break controls ...and sevdral power paths are used at once... Oh my

[@markthefarmer]

Is case combine ready for harvest season??

[@Thecrazyvaclav]

First time Kevin turned up I thought what a clown and a hack, now I’m all yea he knows what he’s doing

[@noobFab]

At 1:37 The ear hair from the camera is getting a little on the long side. It's reminding me of my grandfather...

[@DGHD]

It's zip tied up now, should be better

[@mikekuschka998]

Would it be possible if you visit the USA. To pick up some gasket remover, then carry it back?

[@AlienX511]

Shout out to Kevin for being true farmer! Not like ones a.k.a big farmers that buying new tractors every year with government subsidies and crying that they don't have enough money in their pockets while trying to push out of business small farmers

[@01AceAlpha]

We call them a suit-Case, because you need a suitcase of parts to keep it running.

[@sprint48219]

I wonder if the White 6065 tractor has the same pin arrangement ? we've got one thats driving us nucking futs

[@MikaelRudolfsson]

So make sure the shaft is well lubed 😂🤣

[@brianhaw9398]

I always thought more splines meant stronger but Kevin said bigger splines meant stronger. Also , can't you stand up and stretch your legs while driving(seat sensor) without pto shutting off?

[@farmerbill6855]

Ya just can't start it. It would be useless for stationary work if you had to sit in it. Running a generator, feed grinder, grain auger, etc.

[@brianhaw9398]

That's kinda what I was thinking.

[@redlock4004]

Do all farmers do this sort of work on their equipment? Do some of them get a mechanic to come in and do this work?

[@druideverett1603]

Pull you thumbs out boys and girl. Like and subscribe.👍

[@martyh9309]

Loctite 638... The green stuff is good for those pins when you run out of that Case stuff. Also, a carbide scraper is better than razor blades. 😁😁

[@user-ek4pg9wn2d]

The gasket stripper product is a mix of methanol, xylene and dichloromethane (dcm). so you can probably get away with a dcm paint stripper if you can still find it, or straight dcm from a solvent supplier

[@brahmvandop100]

I hate those Pins! Such a pain to remove or install on the old Maxxums.

[@TheWilber09]

Ford makes that gasket remover still i believe. Also anyone on here astro tolls makes a carbide scraper. One pass and done usually.

[@nik12937]

24:30 I know it's a pain in the ass, but you guys seriously need to wear gloves with that stuff (or any fluid really). You're going to develop nerve damage in the future, and that's a pain that can't be remedied with painkillers or a couple beers. It's agonizing. A good alternative I've found for gasket scraping is carbide scrapers. You have to be careful not to gouge the surface you're scraping, but that cuts through pretty much anything like butter.

[@proudpennsylvaniaman7996]

I could ship ya a case of the good stuff buddy 😂

[@laurencegibbs2753]

I think the European spec machines had selectable PTO doing away with a lot of that complexity.

[@bonedaddy4670]

Can we get a 24x7 Kevin cam channel? He is so entertaining! 😅

[@timperpar583]

I love how he flaters himself that he has only 30 years old tractor and not 40. ps I know that for tractor and equipment we run a lot of them much longer.

[@HootMaRoot]

How come north America still uses the standard 1960s style lifting arms which are such a pain to hook up to implements, and not moved over to the euro style lifting arms with the hooks

[@RuralMidwest]

The majority of our equipment is trailed implements for larger field. Most farms here have only a few 3pt attachments.

[@HootMaRoot]

@@RuralMidwest I know that but the hassle I see many farmers on youtube doing nothing but complaining when mounting/dismounting snow blowers and other small implements. And over the last year a few Canadian farming youtubers having a good rant about the euro lifting arms not even being an option while the top link comes in at least 3 options

[@RuralMidwest]

@@HootMaRoot I would much rather have the euro mounting system, 3pt by yourself is a huge pain.

[@HotForgeChaos]

The day that aerosol cans like CRC gasket stripper, cosby sauce and WD-40 is considered contraband is the day I leave for Mars. Who's coming? Also, 3M bodyman's bristle disc, works a treat for cleaning off garbage from steel gasket surfaces without hacking up the surface

[@ryanedwardson6541]

LegArms is shaking his head and hanging it in shame ;-). This drawbar is a bit smaller tho.

[@edwhite6250]

👍

[@madcat4563]

Kevin's got a bit of a bad luck streak going.... Or I'm mixing in Andy's mechanical dramas as well. The 5000 series sounds like a nightmare.