GAS TANK FILLER BUILD.

[@gordonhenagar6652]

Love the rust “touch up”, also know what it’s like to work while injured, it’s hard to stay with it.

[@PuddinsFabShop]

Ya working in the back is the worst area to work with it too.

[@TheRedNeckConnection]

well done. Where are you going to put your spare tire?

[@Bigskyguy56]

Nice work. Good to see that you take your time & work through the small items , using detail to accomplish a well thought out project. Stay Real

[@joell439]

great result. nice to see the grinder fire shirt is back in rotation 😊 👍👍

[@PuddinsFabShop]

I love that shirt !

[@gtmotorsports937]

As always,you’re doing a great job knocking out these small projects.

[@PuddinsFabShop]

Thanks!

[@PeterHatch-mx7zc]

Watched again ! This was a great build ! That guy i miss!!

[@DrShankenstein]

Great job! I love this channel! Keep up the great work

[@PuddinsFabShop]

👊🏻👊🏻

[@waynespears5664]

Very nice work,your fab work is second to none,THANK YOU for sharing

[@luzgonzalez2838]

NICE VIDEO. AN EXCELLENT WELDING TUTORIAL.

[@rickbarger5161]

I'm still sitting on my ass watching your complete build on your travelall awesome build

[@andrewreece3861]

Watching KZbin videos makes money for Puddin. So even though sitting on your ass won’t finish your project, it will help Puddin finish his project.

[@jeaniepatterson2384]

Great job. Enjoying the travelall build

[@repairrestoreandrebuild8974]

Doing a rustoration on an 84 F250. Building a wood bed and find myself in the same situation with trying to flatten out an angled mounted neck from a later model truck (mine was rusted out and too short to reach where I needed it to go). Luckily the vent tube is inside the filler tube on mine and the donor. I had planned to remove and reattach themount ring at the angle I need and now I see that it should work.

[@PuddinsFabShop]

Heck ya

[@treasureseekerintheway3515]

Of course we liked the video! We empathize with you. It almost always takes longer than you think it will to get something done. At first I seriously thought it was just me, because most other KZbin videos make it seem like fabrication is so quick and something like what you did should only take two hours instead of five or six. One of the things I appreciate most, is I can relate to your realness in being humble and letting us know that fab work takes time. Granted some people are way quicker because of all the experience, but some things just take time. I would rather it take way longer and do it myself and have those memories than paying someone else. Just my .02. Appreciate you.

[@PuddinsFabShop]

Some times shit goes smooth and others not so much. Today kicked me ass, not this filler but what I’m working on. It’s part of it. I appreciate your kind words. Thanks you.

[@treasureseekerintheway3515]

@@PuddinsFabShop the important thing is that you are putting in the time to make your dream a reality. A bit at a time. :)

[@mechanicmike1236]

I like how the cap blended in the body, I was wondering how you were going to finish it, originally thought you would prime it, like the patina look!!

[@PuddinsFabShop]

Trying to make it looks like it belongs.

[@423alonso]

Your videos deserve way more subscribers and views for sure 👏👏👏 you sir have better real content than any fake TV show God bless....

[@dac2250]

Excellent as always!

[@PuddinsFabShop]

Thank you!👊🏻

[@shanewright6958]

Great job. It's turned out looking good 👍👍👍👍🇨🇱

[@PuddinsFabShop]

Thanks Shane! 👍🏻👍🏻👍🏻👊🏻

[@glenhynes3593]

Love how you see it and then do it

[@jamesdawson4366]

Why didn't you put the filler pipe for the fuel tank on the driver's side mate James from western Australia love you shows waiting for my car to be painted then I can get into it

[@PuddinsFabShop]

Fit better for the passenger side

[@robertmccartney8557]

Great job. Enjoy the work you are doing.

[@PuddinsFabShop]

I ha k you for watching.

[@robertstaley6428]

Great work as usual, all the best

[@Fatspurios]

No sand fill it with water and freeze it. You're an engineer and I'm blowing out my arse. Be well and stay safe.

[@SchysCraftCo.]

puddin it is looking real good. fab on. weld on. god bless.

[@rockypergin2216]

Lots of work. It’s going to be cool

[@jerseysfinest3595]

Very nice work.

[@kwikslvr73]

Excellent job!

[@PuddinsFabShop]

Thank you!

[@fjbowen3155]

Good job making it work!

[@PuddinsFabShop]

Thanks! It was a pain lol

[@martinjay5906]

Nice work!!!

[@paullemon6542]

You are a true fabricator

[@rdspeedfab]

Good work man!

[@PuddinsFabShop]

Thanks Rob!

[@michaelfarino9048]

Great job

[@jameswelch7516]

Another great job keep them coming

[@PuddinsFabShop]

I’ll try!

[@georgem9554]

Another good one

[@ronbelldvm]

Nice job.

[@thomasdavis5]

Alot of work, but what a great job!

[@PuddinsFabShop]

Thank you!

[@davesweet7061]

did you run the vent hose over or through the frame? thanks for sharing your skills

[@PuddinsFabShop]

It will be yes. Thanks for watching!

[@kenreichard3967]

Friggin Awesome

[@fff-cf4fx]

This was a good one. Btw is that an old Wilton vise?

[@PuddinsFabShop]

It is!!

[@JohnSmith-qj4cf]

Back watching

[@PuddinsFabShop]

👊🏻👊🏻

[@lanceclark3540]

Looks good

[@scottmartin6955]

Cheers for that

[@PuddinsFabShop]

👊🏻👊🏻

[@PeterHatch-mx7zc]

Looks good !!

[@PuddinsFabShop]

Thanks peter

[@dwaynelejeune3508]

Great work Great explanations Have you tried using chemicals to create your patina instead of paint? Ive used combination murcacid toilet bowel cleaner And wet down the new metal. It rusted up in a few days almost like the side of your travel all. I looked up the recipe on utube lol

[@PuddinsFabShop]

I’ve peed on stuff before to make it rust. Does that count? 😂😂

[@mikethrapp]

Love it.

[@keving.9227]

Jacob is the filler neck already attacked to the inlet of the fuel tank? Or that is still pending?

[@PuddinsFabShop]

Is attached. That piece of rubber connects between the filler and the inlet of the tank.

[@markstephens190]

Nice Job

[@PuddinsFabShop]

Thank you

[@87jstep]

Was that shirt involved in another fire!!!

[@chrisfinley4816]

Creative.

[@awesumenergy]

Like it was always there! Lot of screwing around but that's what it takes sometimes ...

[@PuddinsFabShop]

A little getting after it, head scratching, and tinkering to get there.

[@arifmahida8666]

👍

[@venvnco6259]

Nice job. Looks like your not far from taking a ride.

[@PuddinsFabShop]

Getting closer!

[@crizcriz103customz]

Like the intro

[@PuddinsFabShop]

👊🏻👊🏻👊🏻

[@XCHANGEDAVE]

Dang what a pain in the ass. I can't believe International made it so complicated. It looks like you got it squared away though

[@paintgunexpress1949]

Giod work...man.....Keep at it.....Brother Grindn and shinning..........SMASH SMASH SMASH THAT THUMBS UP👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@PuddinsFabShop]

Thank you!!

[@luciofranco8634]

What vehicle is that out of?

[@PuddinsFabShop]

I believe a 94 or 96 f150 or f250. I don’t remember honestly. I do think I say it at some point in the video.

[@garybrady9531]

disco boot...never caught on in Louisiana

[@dontblameme6328]

This was back in the day when the New Balances did their own talking.

[@jayinmi3706]

Now where will you put the spare tire?! lol

[@PuddinsFabShop]

I won’t carry one unless I’m on a road trip

[@buddhabelly-ce4xv]

@@PuddinsFabShop Is there a reason to sacrifice the spare wheel space?

[@winginitgarage8520]

You're going to pull the body? Why?

[@PuddinsFabShop]

Weld up a couple things, box the frame, paint the frame and the bottom of the body.

[@winginitgarage8520]

@@PuddinsFabShop yeah I guess that would make sense.

[@PuddinsFabShop]

Just want it clean under there.

[@PeterHatch-mx7zc]

@@PuddinsFabShop dont cut this corner doing a great job on her!!

[@Alfie289KCode]

Nice frame mod

[@PuddinsFabShop]

👊🏻👊🏻

[@Dagrond]

You're gonna have a hole in your spare tire.

[@PuddinsFabShop]

Need one anyhow!

[@oldcarnut3953]

👍