Putting C-Notch into S-10 Frame On 1948 Chevy Truck

In this video I will continue working on a 1948 Chevy truck restoration. Mainly I will focus on a Frame. This will be a step-by-step tutorial on how to put a C-notch into the frame (specifically a mini C-notch) in order to be able to get the truck much lower to the ground. I will go over the tools being used for this procedure. This is a first for me so as usual, I learn as I go. I really hope this would help folks out there that will attempt to install a C-notch into their vehicle.
Music used:
Song: SKIRK - Serenity
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported

[@evelynsalazar6057]

Beautiful job very good job thanks for letting me know how to do it

[@fix206]

You are very welcome !

[@catalinpetrescu4659]

Merry Christmas ,I am glad you're ok .

[@fix206]

Thank you!! And same to you!

[@harveybreaux2776]

Great job glad you are doing well now, Hope your family has a blessed Christmas. Looking forward to this build...

[@fix206]

Thanks, you too!

[@MrBobbyd45]

Enjoy your channel. Surprised that you don't have more subscribers.

[@robertwest3093]

You have great taste in trucks! The Chevrolet 3100 body style trucks are my favorite. My brother has a 1954 that he swapped the straight 6 and 3 speed out for a 350 with a 4 speed.

[@fix206]

Thanks Rob, this is definitely one of the best looking classic trucks. Eventually this truck will be getting a 5.3 L motor...

[@joanwilliams3221]

Wonder what happened to you WOW glad you’re ok take care and Merry Christmas looking forward to more video’s

[@fix206]

Thank you, it's been a bit of a roller coaster as of late. But the work must go on, more vids to come soon. Merry Christmas!!!

[@owenparker6651]

You could be a professional welder man!! Grand job of it. Look forward to following this project! Merry Christmas and happy holidays to you and yours! Thanks for sharing!

[@fix206]

Thank you Owen, I am far from professional welder, just watched some KZbin videos on welding and spent a few hours practicing, basically just have to figure out the right pace and consistency as you weld along. I'm sure if you log a few hours with a welder you could probably put down better looking bead than me :-) Merry Christmas!!

[@PhillipHall01]

I am running today. I did watch the first few minutes. I am glad you and your daughter and pet are ok! Good to have you back. I look forward to watching the video later. Merry Christmas! Gods blessings!

[@fix206]

Yes, thankfully the dog and the kid are unharmed. Sure am glad to be back. Hope you like the new video. Merry Christmas to you and yours!!!

[@PhillipHall01]

@@fix206 I watched the rest! Great work! Great video!

[@fix206]

Thank you Philip, I've been trying to make some progress on it as of late

[@UNIQUEGrills]

Frame officially notched 👍🏻

[@fix206]

Shure is :)

[@RODZILLA65]

Sorry to hear about your accident. Nice work on the c notches.

[@fix206]

Thank man!!!

[@lbsautopinturas7329]

Thanks for a new video

[@fix206]

Thanks for watching!! Merry Christmas !

[@Medinabros2007]

Muy bien Bro saludos desde Honduras🇭🇳 excelente trabajo 👍👍

[@fix206]

Mucho gracias mi amigo !!

[@raysolis6553]

You are awesome! Thank you for your video posts and glad you and your family is ok.

[@fix206]

Thank you Ray ! I do appreciate the kind words !!!

[@jeremymoran2816]

Those are some awesome 😎 sick welds sir!!! Great 👍 job!!!

[@fix206]

Thank you Jeremy... I am no professional welder, but I bet you anything that if you practiced for a couple of hours then you can lay down some real nice looking welds yourself... I recently was teaching my 17-year-old how to weld, I gave him some pointers and after about 30 minutes he was doing real well, once your welder is set up with the right voltage and wire speed, all you really need to figure out is the nice even pace and you have to stay consistent. Pace and consistency comes with practice. There isn't really a whole lot more to it :)

[@orlandolegolas9231]

Hello. Nice to hear from you!

[@fix206]

Thank you Orlando, I know it's been a while since I posted last. I'll try to get more material out more often..

[@ericb9340]

Hello, nice project and good video, thanks, no luck this accident, hope all is well. at the start of the video your safety shoes look nice :-) Merry Christmas

[@fix206]

Thank you Eric !!

[@lukasluke5193]

My favorite ☺️ Merry Christmas!!!!

[@fix206]

Thank you Lucas, merry Christmas to you and yours!!!

[@lukasluke5193]

@@fix206 thanks ☺️😃

[@petar443]

This is going to be awesome series. Merry Christmas.

[@fix206]

There is going to be tons of work to to on this one... Hopefully I won't get burnt out in the process 😆

[@PhillipHall01]

@ Fix206 You won't get burned our. You have your friends here to help keep you motivated! 👍🏻 And when you are finished; you and we, will have plenty to be happy about! You and your vehicle and we for learning!Thanks for sharing your skills!

[@fix206]

I'll try and stay motivated as much as I can, I can't let you guys down :)

[@mohamedsahaad6354]

I'm waiting for next video 😅😅😅📸📸,👏👏

[@fix206]

Coming soon!

[@user-ub6xf4zx4s]

12:15 Бл.ть! 😂😂😂 Ни когда Штирлиц не был так близко к провалу)))

[@BrucePierson]

I'd been wondering why you hadn't uploaded a video and what a terrible thing to happen. How fortunate that it was only you that got hit by the maniac. How much worse it would have been if you all got hit. So glad to see you recovered. Hopefully, your injuries weren't too severe. Good to see you back working on the truck again, this is going to be interesting. I've been thinking of getting a plasma cutter, but I don't think I do enough work to justify the expense, but it would be handy to have one for the odd occasion when it would be used. Have you thought of putting a welding filter in front of your camera when you are welding/cutting? That way we can see the process, rather than the bright flashes. It might extend the life of your camera also, as I heard that bright light from welding isn't good for the camera. Looking forward to more videos now that you are back from that terrible event. Merry Christmas and all the best for a great New Year from Queensland Australia.

[@rubencortes5610]

I was wondering what had happened to u, i am so glad u are doing great. You had made a video of an electrical puller using 3 microwave power supplies, can u plz let me know of that video i would like to make one. Thank you.

[@fix206]

Welcome back Ruben... Here is the link to the Spotter video kzbin.info/www/bejne/oGe4mKd5g5qpsLc

[@user-pw7wl3nu1l]

Молодец Димон давай побольше видосов выкладуй, не филонь👍

[@fix206]

Спасибо, спасибо! Я последнее время больше снимаю чем редактирую и выкладываю видосы. На два или три видоса записей уже хватает так что буду выкладывать по видосу каждое воскресенье 👍

[@user-pw7wl3nu1l]

@@fix206 давай, давай👍 всё никак не могу времени найти к тебе заехать!

[@fix206]

Да я как раз недавно вспоминал О тебе, и думал что нам всё-таки надо как-нибудь пересечься

[@leighbratcher1998]

Sorry about the idiot launching you! Glad you are OK. I am looking at an inexpensive portable welding table, curious to see how it works for you. Merry Christmas.

[@fix206]

The table actually worked out pretty well. I think it goes for right around $60 which isn't bad at all.The table actually worked out pretty well. I think it goes for right around $60 which isn't bad at all. Merry Christmas Leigh !!

[@leighbratcher1998]

@@fix206 Thank you.

[@vassifaliev8120]

I heard that bleyt.

[@fernyblue]

Blat!

[@fix206]

Lol, I've recently rewatched that video of mine and chuckled at that part myself 😂

[@alejandroochoa1643]

Do u have a video of rear end install as i plan on using same on mine isnt the yoke off center on it??

[@fix206]

Yes, the yoke is off centered. I have a few videos to push out first and then I will be posting a video where I will be shortening the longer axle tube to center the pumpkin in the axle. After that a 4 link suspension will go in that will hold the axle in place along with a watts link

[@andyboys5669]

Love it but please stop grinding and welding next to the cars.

[@fix206]

I am always mindful of where the sparks go 😉

[@Momoneymoproblems615]

Wherees the hoa in your neighborhood lmao

[@fix206]

Don't think I understood the question :(

[@Momoneymoproblems615]

@@fix206 youre lucky your neighbors are cool. Your house look like a recycling shop lol

[@fix206]

@@Momoneymoproblems615 Oh, HOA... LOL it made more sense once I reread the question. Luckily I don't live in an HOA neighborhood. And you can't really see what it is that I'm working on because my work area is blocked off with 3 vehicles from 3 different sides that somewhat face the street. I know the work area isn't the prettiest but I work with what I got :-)

[@liubomyriskorostenskyi941]

Are you russian, or ukrainian?

[@fix206]

I am a mix, my father was Russian and my mom Ukrainian... but I was born and raised in Russia

[@liubomyriskorostenskyi941]

@@fix206you are doing a good job, waiting for your new videos

[@user-zw4zv3ir7p]

"блять" очень чётко, вы не из России? 😂

[@fix206]

Да, я родом из России, но в Америке живу уже 25 лет. Сначала хотел вырезать "блять" но потом решил оставить, думаю это там как раз по месту :)

[@timdavis970]

only 2 videos of the 3100 build?