Pyrography - How to Wood Burn | The Basics + Advanced Techniques

In this wood burning tutorial I show you how to stencil letters to wood burn with a wood burner tool. These concepts will help with your wood carving & power carving as well.
► Razertip Woodburner SSD-10 & Smoke Extractor: store.razertip.com/mm5/mercha...
🔔 SUBSCRIBE HERE: bit.ly/2mEWLQk
► Kutzall Burrs - Use coupon code CCREATIONS (case sensitive) for 5% off.
www.kutzall.com
✔ JOIN OUR FACEBOOK GROUP:
/ woodcarversoftheworld
WATCH NEXT:
• How to Wood Carve Basi...
• How to Wood Carve/Powe...
• How to Wood Carve/Powe...
⮞ GET 30 DAYS OF AMAZON PRIME FOR FREE WITH THIS LINK:
amzn.to/2A5VYCj
⮞ BUY THE TOOLS & SUPPLIES I USE ON AMAZON BELOW:
► Foredom SR (My favorite carver) amzn.to/2HRXbzC
► Dremel 4000 Carver: amzn.to/2Ubc4TS
► Start carving with this wood: amzn.to/2AEZkMG
► Dust Mask: amzn.to/2MAJcOV
► Anti-Fog Safety Glasses: amzn.to/2ULu2ej
► Budget Rotary Burs/Bits: amzn.to/2Va2Q79
► Pre-stain: amzn.to/2Y2QUqs
► Dark Walnut Stain: amzn.to/2MAskrn
► Urethane: amzn.to/3cDc4jS
► BeaverCraft Carving Knives amzn.to/3dFqZvp
► Basswood Blocks: amzn.to/3dFr9Tx
► Good Wood Burner: amzn.to/3czX1aH
► Best Wood Burner: (RazerTip): bit.ly/2IeR5rP
► Carbon Transfer Paper: amzn.to/2A9uCeq
MUSIC
► app.soundstripe.com/referrals...
☀ Connect with me:
►FACEBOOK: / cornelius. .
► INSTAGRAM: / cornelius_cr. .
► KZbin: bit.ly/2mEWLQk
🔔 Subscribe : KZbin: bit.ly/2mEWLQk
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.”

[@CorneliusCreations]

Get your Wood Burner from Razertip here: store.razertip.com/mm5/merchant.mvc?Screen=SFNT&Affiliate=Cornelius

[@littleliftera8244]

Cornelius Creations The wood burner you listed on Amazon is not a razor tip. Which do you prefer these separate pans or the separate tips

[@derickcall2270]

Dude, you are the man. I just recent took an interest in wood carving and burning because I decided to build a viking themed dining table and your videos are the best. Logical. Step by step. Pacing and explanations for each step are great. Good job man, and thanks!

[@gamingchinchilla7323]

If I may suggest a minor little tip here. Before you print your template, change the color to something lighter. Maybe change it to a blue color. that way when you are doing your tracing, you can see the lines you have already traced and you can easily tell when you are finished

[@CorneliusCreations]

Fantastic advice, thank you!

[@kingsleyossuetta6216]

Awesome tip.

[@theloveleebaker]

Thank you fir this video. I was recently given a small keepsake box to burn and had no idea how I was going to proceed. Many thanks! ✌🏾❤️

[@rcgkreations]

Great tips, thank you

[@davidlashaway]

Definitely a tutorial that I needed. Not much time on my burner yet. Thanks Matt!!

[@CorneliusCreations]

Glad you enjoyed it and got something out of it bro!

[@tia283]

I'm going to try this, thanks!!!

[@IsaKocoglu]

Welcome back! Great helpful stuff as usual. Keep up your great stuff 😎👍

[@CorneliusCreations]

Hey Isa, thank you for the comment and encouragement! Glad to hear you are enjoying the videos.

[@bobotto1786]

I've recently started woodburning and using a Dremel. You're instructional videos are Awesome! Thanks so much.

[@CorneliusCreations]

Glad you like them!

[@crafts_avenue]

hi matt thank U for the great tutorial, I just got my burner or what ever its called and was happy to stumble on ur video.

[@billbeckstead]

Your tutorials are Awesome!

[@CorneliusCreations]

Thank you Bill!

[@briansworkshop01]

Great video thanks for sharing your time and skill from the UK 👍👊

[@CorneliusCreations]

Hey Brian thank you for your comment bro! Glad you enjoyed the video bro’

[@AlanSextonVT]

Hello from Vermont, Matt, and thank you for sharing your expertise! New diehard fan here and glad I came across your channel.

[@CorneliusCreations]

Hey Alan! Awesome to have Vermont in the house. Glad you are enjoying the content!

[@scatoutdebutter]

Thanks!

[@op25ttfd]

I love the videos they are really awesome. One tip I learned about doing carvings and pyrography from another KZbinr is pre soaking your wood so the grain will come up and you can sand it so after you're done carving or wood burning when you finish your project the grain will have already been raised and sanded so it doesn't raise on you during finishing.

[@CorneliusCreations]

Glad you enjoyed the video! Great tip! Thank you for sharing!

[@op25ttfd]

@@CorneliusCreations you got it. I have the Colwood burner and the place I bought it from I think is called the pyrography store and she sells the razor as well. She gives free cleaning kits when you buy a burner. Colwood says not to use any type of sand paper on your tips, is that different than the razor? I was told its cause many of the tips are polished and also sanding even with fine grit shaves off metal.

[@OzArt]

You don't want to pre-soak the wood you want sand the wood and then take a light sponge and dampen it wait an hour or so for the wood grain to rise and then lightly sand it

[@vlonsdale21]

Thank you from beginner, best video 😊

[@CorneliusCreations]

Glad you enjoyed it!

[@mickkeim4142]

Thanks buddy...great tips and how to.

[@CorneliusCreations]

Thank you Mick! Glad you enjoyed it!

[@user-kx1bx4rc4c]

This is useful information. Never knew that about the fontwork setting.... Takes designing to a whole nother level. I do wood burning just like this. Absolutely love the tutorial. You got a new follower

[@CorneliusCreations]

Thank you for the kind words, I am happy you enjoyed the video!

[@noahsark5279]

Watching your videos raises my mood every time. You’re so positive and encouraging. Wish you were my neighbor so some of it could wear off on me. Your channel subtitle name should be “loving life.”

[@coastbill]

The way you teach is 'awesome' buddy.

[@CorneliusCreations]

Hey Bill! Thank you man, I appreciate it bro!

[@edparnell3009]

As always, another great video. Never to old to learn, I say. Thanks Matt.

[@CorneliusCreations]

Thank you Ed, glad you enjoyed the video sir!

[@celleduffel1533]

Wonderful video, I just got my woodburner and starting on my 2nd little project..This was very informative!!!!

[@CorneliusCreations]

Glad it was helpful!

[@scottconger1266]

Thanks for the great video, just recently subscribed, very happy, thanks again.

[@CorneliusCreations]

Hey Scott! Glad to hear you are liking the channel! Thank you for your subscription!

[@stefaniaponitz5738]

Super fun!!!

[@CorneliusCreations]

Very!

[@JoeLMorin-jo3kz]

Appreciate your tips!

[@CorneliusCreations]

Thank you Joe! Glad you are finding them helpful!

[@JoeLMorin-jo3kz]

@@CorneliusCreations I started about two years ago, and everything you did was spot on to what I figured to do, but that carbon paper huge huge help! I'm using charcoal which was making it harder, but now I get to use carbon to start, n once I'm going tracing, I'm able to burn n color my work. Thank you so much! ..

[@sirtblairjr]

Hi Cornelius, you should've shown us what cheap will do also. Cause I have a cheap one from hobby lobby with a heating daily on it. Maybe you can show with that one too?.thanks for your videos and channel. I've learned a lot from you thanks again 😊

[@markanthony559]

Nice, I'm gonna have to get myself a wood burner and give it a go.👍

[@CorneliusCreations]

Right on! I’m sure you will love it!

[@wallyjackieturgeon3070]

Another fine ‘how to’, thanks

[@CorneliusCreations]

Thank you!

[@bigseanSM]

Cool video 😎 good to see u back

[@CorneliusCreations]

Thank you Sean! Quick question for you bud, are these stenciling videos like this your favorite? Or what kind of content would YOU like to see? Thank you man!

[@bigseanSM]

@@CorneliusCreations power carving videos are my favorite, but I want to mix some projects with carving and wood burning, so I enjoy and learn from both 👍🏻

[@CorneliusCreations]

Thank you for the feedback bro!

[@charlesmerrifield1734]

AWESOME video thank you for sharing,one thing how long you ave to wait before you can change your tip

[@Stikx-ManWoodworks]

What’s up bro? Thanks for all your tutorials. As far as the wood burners you listed. What are the pros and cons to each from your experiences with them. Just trying to see which one I would purchase. Thanks!!!!

[@karinhenderson976]

Learned things from your tutorial! Thanks! What razertip tip did you have on your pen? What are your most favorite tips? Thanks!

[@gavincoyle]

Great video and awesome tips pardon the pun hehehe I am doing some chopping boards with writing burnt into one side for decorative purposes and I will be very happy to put some of your tips into action especially the scraping with the knife (very useful tip thanks) 👍👍👍

[@CorneliusCreations]

Glad you enjoyed it!

[@bigfoot4455]

I polished my wire tips. I do this with a leather strop and polishing compound also good for cleaning the carbon off.

[@CorneliusCreations]

Great idea!

[@Wollenburg6716]

Hi Matt. Thanks for your video. How did you make the "E" extender, please. Thanks for answering

[@jacksonmcdaniel2411]

could you give us a link on amazon for the bit that you used. Please

[@michaelgould303]

Any tips for burning oak? The tip seems to like following the grain of the wood

[@lllkoioslll6200]

Awesome video! One thing I would recommend doing though is to lower the opacity or choosing a light to medium gray color to print what you plan on transferring. Helps eliminate issues like you had with the “A” and allows you to be more accurate on your edge as you can see the line you’re putting down as you trace.

[@CorneliusCreations]

Thank you man! That is a fantastic idea!

[@tgirt]

what code did you use to add the banner? please

[@dantetonon2394]

I just recently took an interest in wood burning I'm thinking of making signs and such to sell around my city so I was curious how long did it take you to burn that piece that you did in the video?

[@ckniveton68]

Hi Matt, great video, I started making wooden signs using the burning technique, but found that the burnt detail soon faded when exposed to the outdoors e.g the sunshine. any tips to stop this happening? thanks.

[@CorneliusCreations]

Hey Claire! Yes, if you are outdoors you need to seal this with an outdoor rated laquer or urethane. This will solve your problem 👍🏻🤛🏻

[@littleliftera8244]

Your Site is fantastic. Quick question when you say thick burnt edges. Or the outlines supposed to be deeply Etched into the wood? I am a beginner and I’m wondering if I am making the lines too deep or pressing too hard? Thank you again

[@CorneliusCreations]

Glad you enjoy it! The outlines do not need to be burnt deep, just surface level scorch. When I say “thicken” I mean to make the lines wide. Hope this helps!

[@ortholoc]

Hi Matt. I wanted to ask a question. Can I wood burn into 1/8" to 1/4" luan. I have that as a top for a wine box, and want to put the newlywed's names on it. I'm always looking at your videos for inspiration. Keep making them. Thanks.

[@CorneliusCreations]

Yes, you could do that, just take your time and do a test on another piece of wood so you will see how it will react

[@talostheking8529]

Consider setting up a patreon. I think you'd get a lot of backers for these tutorials.

[@CorneliusCreations]

I appreciate this feedback bro!

[@alicerosa6766]

Corneeelius, where were you?...I haven't received your videos lately and I was missing you🙄. I am very happy today that I received this fresh one 😁😁.

[@CorneliusCreations]

Hey Alice! I have been sooo busy! I will be getting a regular schedule together :) thank you for this comment! It is nice to be missed! Haha

[@alicerosa6766]

@@CorneliusCreations Woohoo that's cool you are back. Thank you😊

[@sanivivo]

I’m in. between the razortip and colwood, which one would you recommend, it will be mostly used for writing names on cutting boards?

[@CorneliusCreations]

How often do you plan on using it? Do you want wide range versatility? Colwood will do good but Razertip is still king if you answered yes in those areas. The folks over at Klingspors woodworking shop is a great place to buy from. I have no regrets with my razertip.

[@lauraspottiswood1310]

How do you get rid of any excess carbon that gets on the wood? I rub the paper first like you suggest but I still end up with excess carbon on the wood

[@kelbearmama]

Just bought my first wood burner and I’m wondering if yours came with a ton of tips? Mine did but everything is in Chinese. How would I find out what the tips are for? Loved your video because you made it easy to understand.. Thank you so much!!

[@teebee9735]

I'm sure you've already figured out which tips do what, but in case someone else stumbles by - the best thing to do is get a scrap piece of board and try each one out. A couple of books to check out are: "Learn to Burn - a step by step guide..." and "Creative Woodburning: Projects, Patterns and Instructions..." both can be found on Amazon. 👍

[@kelbearmama]

@@teebee9735 thank you so so much!! Super helpful!!!! ♥️♥️♥️

[@crosscreektrail]

Down loaded Libre Office and although it is free as you stated, it is a very basic program that can not accomplish what you demonstrated without purchasing the upgrade. However, I enjoyed you video and was very informative.

[@teresahoss]

I just downloaded it and followed everything in the video (after slowing down the playback lol) without any upgrades so you don't need to purchase anything. The only thing I didn't find was the exact font, not sure if you can add fonts or not, but there were lots of others to choose from anyway.

[@jeremywalburn83]

What computer programs do you use for your graphics

[@CorneliusCreations]

Open Office

[@robs.patrick9691]

What tip/burning pen did you use? What pens do you use most?

[@andreadarrar5540]

Can anybody help me figure out how to add the banner to the word?

[@knottygin]

What is your favorite tip to use? Thanks!

[@SuzieW27]

you can also use google docs

[@kayakmaccaz9256]

👍🏻👍🏻👍🏻👍🏻👍🏻🇬🇧

[@teebee9735]

Can anyone recommend an app for a tablet that works for resizing patterns / letters to scale, cleaning up the image before printing and is easy to understand? I love my tablet but this is one area that is a HUGE disappointment, and is the only time I miss my big old desktop brick! 😒

[@DrawingWithFire]

I use Autodesk sketch

[@emilygonzalez2774]

Can you stain the wood after?

[@spiritwings4592]

Yes you can

[@trevorprovencher6437]

Hey Cornelius may I ask a question

[@CorneliusCreations]

You sure may!

[@DrawingWithFire]

PLEASE do NOT use sandpaper to clean your tips!!! It is a bad habit that ruins your tips. A leather strop & aluminum oxide will clean your tips & keep them polished.

[@emilygonzalez2774]

I want to learn how to wood burn but on darker wood. How?

[@spiritwings4592]

Same as you do lighter wood

[@coastbill]

Downloaded libreoffice but the font you use is not in the dropdown list

[@CorneliusCreations]

Go to 1001free fonts and download “brandboll”. (I think I spelled that right) I will post a link ASAP for you

[@vancewilson1527]

I downloaded libre installed fontwork it won't let me highlight extra character

[@teresahoss]

I don't think you need to, I couldn't highlight the extra character but it worked fine so maybe they've just fixed that aspect of the program.

[@dejuan4967]

what are the smallest letters you ever carved on wood ?

[@CorneliusCreations]

Very very small!

[@stumorris5902]

So I tried following your video. Don't know what the issue is but the font used doesn't exist and when you said click here and hit the paint bucket there is no indication of any such thing. I haven't watched any further

[@pilotdrift05]

I just figured out. I know you! Haha

[@CorneliusCreations]

Were you in the band Pilot Drift???

[@HomelessOnline]

I'll just have to contact the Amish for some carbon paper...

[@michaeldennis4860]

It’s Basswood not Base wood.

[@CorneliusCreations]

Yes, this was an OLD video lol

[@pulpo439]

Fake.... Failure.

[@maggiefrost709]

Hi could you please tell me the carbon paper you use mine is purple and l can’t get the purple out of the wood 🥲 tried just about everything