How To Rebuild a QA1 Circle Track Monotube Shock

QA1 monotube circle track shocks are racer rebuildable and revalveable. Learn how to rebuild a QA1 monotube shock absorber in just minutes to clean the shock or replace parts.
www.qa1.net 800.721.7761

[@QA1TECH]

TECH TIP: Many QA1 shocks are designed to be rebuilt and revalved by racers. Check out our video on how to disassemble and reassemble your monotube circle track shocks.

[@purnanandamisra6689]

Lovely video Clearly explained specially the Nitrogen filling part like no other videos. Thanks

[@neardood1]

A really well made video, i learned a lot about monotubes from this, thanks guys :)

[@Pickwow]

These are really easy to build

[@gerrywg1]

100 % , Excelente explicação 👏👏

[@venkatarr]

nicely explained. thanks for the video.

[@patsonsakala7923]

How can one get some tools like that,especially for filling the gas?

[@pichaidvaroonchotikul259]

hi, i just want to know what type of oil should you suggest me to refill the tube?

[@newedgefrank3257]

Why do they have fluid and not gas like many others ?

[@keepitspinning]

Awesome video mate. Does the gas need to be nitrogen?

[@patsonsakala7923]

Nice one

[@VRMN8R]

How do you know how much psi you’re putting into the shock? Awesome video!!

[@QA1TECH]

The gas pressure in the shock depends on the compression valving of the shock. The stiffer the compression valving, the more pressure that’s required. For 26 series shocks, set the pressure regulator on your nitrogen tank to the following pressure: Compression Valving PSI 1 100 2 100 3 100 4 100 5 100 6 100 7 125 8 150 9 175 10 300 11 300 12 300

[@VRMN8R]

Thank you. I want to do some “tinkering” so I can get a better understanding on shocks.

[@clauficavilez]

Hello dear, I write from Chile. I want to rebuild my Bilstein PSS10, but can not find the charging valve nitrogen. can you help me to tell me where the valve Thank you so much regards

[@fritzrubiano7124]

What kind of tools did you used to put a nitrogen into shock??

[@QA1TECH]

It depends on the valve fitted to the shock, but we use either a Schrader valve fill tool or a Hyperscrew fill tool. Here's a link with more info: www.qa1.net/suspension/circle-track-shock-accessories/monotube-schrader-valve-fill-tool

[@fritzrubiano7124]

How about tein coilover? What kind of tool used for that?

[@QA1TECH]

Sorry, but I'm not familiar with Tein's construction or if rebuild parts are available. I replied to you on Facebook as well with a link to our authorized rebuilders. You could try reaching out to one of them to see if they can be of further assistance. Also, Feal Suspension might be another resource you could look into. Thanks!

[@chocogarage4804]

hi this oil is what type oil? can you tell me mark example 5w30?

[@QA1TECH]

Thanks for your question. We use a five weight oil in our shocks.

[@eezuanothman8746]

what is the pressure to fill in? in psi

[@QA1TECH]

+eezuan othman It depends on the compression valving of the shock. We use 100 psi for up to a 6 valve, 125 for 7, 150 for 8, 175 for 9 and 300 on 10, 11 and 12. You can call our tech line at 952-985-5675 if you have any other questions.

[@Flash635]

Hyper screw?

[@QA1TECH]

A Hyperscrew is a QA1 Exclusive gas sealing screw. Through the Hypercharging process, nitrogen gas pressure is retained inside the shock by the Hyperscrew. If you have any other questions, feel free to contact us at 800.721.7761.

[@botacarga]

top

[@machineworkdiy.]

interesting

[@reynaldoliver9167]

Adam Sandler is you ? like

[@MrKidkiller159]

no gloves too?

[@MrKidkiller159]

put some safety glasses on , big mistake but then again it's your eyes not mine !!!