Quick Cuts - Calibrating a Titan for Print and cut with Vinyl Master

[@joemello2402]

For some reason I do not have the barcode controller option on my software. I'm using VinylMaster Pro 4.2 with a Titan 3.

[@marcosoto2216]

So I do all this but I want to cut the same file again how do I do that ?

[@aagraphix7466]

Can you please make a video on a print and cut tutorial for SCAL on the Titan 3 ? I’m having trouble getting precise cuts on my prints. Thanks in advance!

[@uscuttervideos]

I do have plans to make some Quick Cuts videos for SCAL 4 in the future.

[@fernandolanderos4600]

What’s scal 3

[@ldinatale1]

Thank you for the great video.

[@ScottSalvi]

Great video. Thanks. Sure wish you would do one with SCAL Pro...Having a lot of difficulty getting that one to cut properly & consistently.

[@uscuttervideos]

It's on the way. there is just a much larger demand for Vinyl Master so I knocked it out first.

[@justhealth2002]

Can you do the barcode feature on the Titan one and print and cut?

[@uscuttervideos]

I am finishing up editing the video for calibrating and performing manual contour cuts with the Titan 1 and 2, but they neither of them have the barcode ability. That is only the Titan 3

[@JohnPiperBoots]

***@@uscuttervideos - ACTUALLY My faithful Titan 1 15" use to have ARMS capability and now US Cutter RIPPED me off and no longer has the ability to use ARMS! Using the Vinyl Master LTR v4.2! Any help???? Please pass to this US Cutter management! Thank you.***

[@bravobravo3498]

How do you adjust the arms on the titan 3

[@uscuttervideos]

This covers the ARMS contour cutting process. If you are talking about the pinch rollers, they do need a bit of WD-40 used on them.

[@jeanarquette4186]

Which version of Vinyl Master are you using?

[@uscuttervideos]

I personally use the DSR version, but this can be done in every version.

[@JustArandomDude11c]

where do you get that sticky backing sheet?

[@uscuttervideos]

www.uscutter.com/Medium-A3-Vinyl-Cutter-Carrier-Sheet

[@ninjatamayo77]

I have problems calibrating my titan 3 could you help me

[@uscuttervideos]

Every item we sell comes with lifetime customer support. You can reach them at [e-mail]

[@eXpansiveconsciousness]

Can this be successfully paired with an HP Latex 115 & HP Flexi Basic to do contour cutting using the barcode feature?

[@uscuttervideos]

Yes, it can. I mention how you would do this right here kzbin.info/www/bejne/gZ7Zf6lobbVod80

[@eXpansiveconsciousness]

USCutter Videos Thank you. So it would need to cut using Vynil Master only? Or can you use another third party software or HP Flexi to cut?

[@uscuttervideos]

The HP version only runs with HP cutters. If you wanted to run the Titan and the HP printer in the same program, you would need to get the Flexi version of the print and cut. You should sign up for the HP webinar tomorrow! attendee.gotowebinar.com/register/8525202350977011727?source=Insta

[@eXpansiveconsciousness]

USCutter Videos Thanks Josh. Will check it out.